Copy Link
Add to Bookmark
Report
HOMEBREW Digest #5111
HOMEBREW Digest #5111 Wed 20 December 2006
FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Digest Janitor: pbabcock at hbd.org
***************************************************************
THIS YEAR'S HOME BREW DIGEST BROUGHT TO YOU BY:
Northern Brewer, Ltd. Home Brew Supplies
Visit http://www.northernbrewer.com to show your appreciation!
Or call them at 1-800-681-2739
Support those who support you! Visit our sponsor's site!
********** Also visit http://hbd.org/hbdsponsors.html *********
Contents:
Re: What's The Temperature, Kenneth? (harry.backenass)
Ginger Ale (HBD 5110) (Mark Garthwaite)
Fermentation temperature ("Peed, John")
A lot of foam on the first pint of the day... (Michael Eyre)
Glyn asks about Imperial Porter or other great Porter recipie's ("Steve Laycock")
For our fearless Lager! ("Steve Laycock")
Re: What's The Temperature, Kenneth? ("Greg 'groggy' Lehey")
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* The HBD Logo Store is now open! *
* http://www.hbd.org/store.html *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Suppport this service: http://hbd.org/donate.shtml *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Beer is our obsession and we're late for therapy! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Send articles for __publication_only__ to post@hbd.org
If your e-mail account is being deleted, please unsubscribe first!!
To SUBSCRIBE or UNSUBSCRIBE send an e-mail message with the word
"subscribe" or "unsubscribe" to request@hbd.org FROM THE E-MAIL
ACCOUNT YOU WISH TO HAVE SUBSCRIBED OR UNSUBSCRIBED!!!**
IF YOU HAVE SPAM-PROOFED your e-mail address, you cannot subscribe to
the digest as we cannot reach you. We will not correct your address
for the automation - that's your job.
HAVING TROUBLE posting, subscribing or unsusubscribing? See the HBD FAQ at
http://hbd.org.
LOOKING TO BUY OR SELL USED EQUIPMENT? Please do not post about it here. Go
instead to http://homebrewfleamarket.com and post a free ad there.
The HBD is a copyrighted document. The compilation is copyright
HBD.ORG. Individual postings are copyright by their authors. ASK
before reproducing and you'll rarely have trouble. Digest content
cannot be reproduced by any means for sale or profit.
More information is available by sending the word "info" to
req@hbd.org or read the HBD FAQ at http://hbd.org.
JANITORs on duty: Pat Babcock (pbabcock at hbd dot org), Jason Henning,
and Spencer Thomas
----------------------------------------------------------------------
Date: Wed, 20 Dec 2006 7:40:35 -0800
From: <harry.backenass at charter.net>
Subject: Re: What's The Temperature, Kenneth?
I haven't tried this myself, but one item that you could probably use to
monitor the temperature inside the fermenting wort is a type of probe
thermometer available at pet stores for aquariums. They are inexpensive - I saw
some at a PetSmart for $10 or so.
Harry Backenass
Somewhere in Middle America
------------------------------
Date: Wed, 20 Dec 2006 09:42:58 -0600
From: Mark Garthwaite <mgarth at primate.wisc.edu>
Subject: Ginger Ale (HBD 5110)
A question regarding the adaptation of Jeff Renner's ginger ale recipe:
Do you carbonate this and if so to what degree? Or is it mostly
still and just pushed via CO2?
-Mark in Madison, WI
------------------------------
Date: Wed, 20 Dec 2006 09:43:10 -0800
From: "Peed, John" <jpeed at elotouch.com>
Subject: Fermentation temperature
Steve asks about fermentation temperature relative to ambient. Steve,
you're a thinkin' man, and you're gonna do just fine as a result - most
people just believe what they want to believe, rather than actually try
figure out what's really going on. Fermentation is definitely an
exothermic reaction, so the wort is definitely warmer than the ambient
temperature. And yes, the more vigorous the fermentation, the more heat
is generated, which makes it one of those nasty positive-feedback
situations - the higher the ambient, the higher the wort temperature and
the more vigorous the fermentation, and the more vigorous the
fermentation, the higher the wort temperature. To keep an average ale at
68 F when it's at peak fermentation, you will need to keep ambient
temperature 6 to 10 degrees cooler; 60 to 62 is a safe bet if you have
to go by ambient. Better yet is to stick one of those digital liquid
crystal thermometer strips on your fermenter, assuming it's a glass
carboy or metal keg (a plastic bucket is too good an insulator for a
Fermometer do you any good). Those things really aren't very good
though - I don't rely on them to be any closer than within 3 or 4
degrees of actual wort temperature. How would I know? Because I've
cross-checked them with a much better device. And this is a nice blend
into your second topic, the remote-probe thermometer with the steel
braid jacket that develops problems. My local Wal Mart has a
remote-probe digital oven thermometer that has a silicone-jacketed probe
cable that's sealed where it joins the stainless probe. The probe is
about 6" long and is nearly straight, which makes it easy to drop into a
carboy for a quick measurement. The cable is smooth, very flexible and
easily cleaned and sanitized. Not only that, they appear to be accurate
to within close to a degree (several units checked against a good glass
thermometer). They do have quirks - Max, Min and Alarm buttons that
could be useful, but which are just annoying to me. And the only way to
turn them off is to remove the battery. But they don't draw much
current, so no real need to turn them off. And mine has locked up once
or twice in several months of use, so just keep in mind that it can
happen (R&R the battery to fix that). I believe the name is AccuRite,
and they're around $15. I highly recommend them for periodic checks of
fermentation temperature or for monitoring mash temperature full-time
(mash temperature stratification is a whole nuther thread). The
electronic part of the unit doesn't like being immersed in water any
more than you do, and it'll last about as long under water as you would.
Fortunately, though, if you ever do dunk it, it should work fine again
after allowing it time to dry out.
So, ale at peak fermentation: 6 to 10 F higher than ambient. After 2
days, the difference drops about 2 degrees a day. The temperature
differential for lagers seems to be 6 to 8 degrees at peak fermentation,
with the same sort of reduction there-after.
John Peed
Oak Ridge, TN
------------------------------
Date: Wed, 20 Dec 2006 19:05:00 -0800
From: Michael Eyre <meyre at sbcglobal.net>
Subject: A lot of foam on the first pint of the day...
And that about says it all. I'm getting a small burst of foam on the
first pint of the day (half day? Some period of long-ish rest between
pints) with all subsequent pint pulls being picture perfect. I've got a
1 foot rise to the shank and through-the-door faucet and a 4.5 foot gas
line length based on my calculations. I'm chilled to 38 degrees F. I
figure this should be just about right, and seems to work perfect for
most things.... but I look like a bit of an amateur on the first pint of
the day. Any idea what gives?
Mike
------------------------------
Date: Wed, 20 Dec 2006 13:09:51 -0800
From: "Steve Laycock" <slaycock at discoverynet.com>
Subject: Glyn asks about Imperial Porter or other great Porter recipie's
I too would appreciate a great porter recipe. A friend of mine is a nubie
in the homebrewing world and
has been pestering me for a good porter recipe to brew up.
I havent dug through my personal recipe archives, but would appreciate
like Glyn a proven recipe for that perverbial "wonderful porter".
Thanks so much for your help!
Steve in KC
Highwater Brewhaus
"I know it is not a "true" style so say robust. I just find it
funny with all the "Imperial" beers coming out right now,
seems to be the current trendy thing.
So does any one want to share a great recipe?
Thanks,
Glyn in S. Mid. TN"
------------------------------
Date: Wed, 20 Dec 2006 13:36:18 -0800
From: "Steve Laycock" <slaycock at discoverynet.com>
Subject: For our fearless Lager!
I would like to take this time to personally thank Our fearless Lager Pat
Babcock for his time and frustration in maintaining this board over this
year and past years!
Thank you Pat & all of your little elf's (real or imaginary) that have
helped you through yet another year of the HBD!!!
We all appreciate your diligence with keeping this board together, clean
of computer trash and moderate the occasional wild fires that pop up between
those passionate brewers that frequent and contribute to this "Library of
Alexandra"
This place is truly a special place for an unending source of Brewing
information.
Information ranging from the seemingly insignificant to the unimaginable
complexity that fuels our craft.
Thanks to all the contributors that keep things going for us lurkers to
glean from. I've pondered many a question that I have found addressed and
answered on this forum.
I wish you all a Blessed Christmas Celebration & a Malty New Year!!
Steve in KC
(P.S.. Pat look for a contribution check from me (and hopefully others),
for your never ending HBD expenses & Thank you again!!)
------------------------------
Date: Thu, 21 Dec 2006 11:58:39 +1030
From: "Greg 'groggy' Lehey" <grog at lemis.com>
Subject: Re: What's The Temperature, Kenneth?
[Breaking attribution to adhere to list policy]
On
Tuesday,
19
December
2006
at
13:47:39
-0600,
Daniel,
Steven
J.
(JSC-NS)[AND]
wrote:
> Merry Christmas everybody!
>
> I have a question regarding refrigerator temperature control during
> fermentation. My controller, like most others I've seen, monitors the
> air temperature inside the refrigerator to determine cooling demand. I
> would assume there must be some heat generated by the fermentation
> process, and this would result in a delta between the controller
> set-point and the actual temperature of the fermenting beer. So, if a
> beer is actively fermenting in a refrigerator set at 50F, how much
> hotter will the beer be than the air?
It varies during the fermentation. It can go as high as 5<forbidden
degree symbol>C at the height of fermentation.
> Would the delta be greater for a warmer ferment (i.e. ale fermenting
> at 65F) since the fermentation is more vigorous?
In general, yes.
> It seems that I would need to set the refrigerator at a slightly
> lower temperature than I want the beer to be, but the question is
> how much lower?
Depends on lots of factors. In general, you're better off measuring
the wort temperature. This is what I do--see
http://www.lemis.com/grog/brewing/temperature-control.html for
details.
> On another note, I have an observation related to digital
> temperature probes that I'd like to pass along. <Interesting story
> removed> I am contemplating whether to attempt to grind off the
> crimp and pull the innards out of the stainless tube, then pot the
> innards with silicone sealant and reinsert. This may ruin the probe
> if I'm not careful, but it may also make the probe more water
> resistant if I'm successful. Any thoughts on this?
We've had a fair amount of discussion of temperature probes and where
to place them, both on this list and (more) on the Australian
Craftbrewers list. I've always advocated placing them on the surface
of the fermenter, while others have placed them inside. My arguments
are hygiene on the one side, and ease of control on the other: the
temperature in the wort is not constant, and it takes longer to react
to external influences, making it more difficult to control the
temperature. The down side is that you want to measure the
temperature of the wort, not the outside temperature. I use
polypropylene fermenters, which means that a small patch of bubble
foil will insulate from the outside. Glass should be similar, but
with metal fermenters there's a danger that the outside temperature
could influence the reading too much.
Greg
- --
Finger grog at lemis.com for PGP public key.
See complete headers for address and phone numbers.
------------------------------
End of HOMEBREW Digest #5111, 12/20/06
*************************************
-------
