Copy Link
Add to Bookmark
Report
HOMEBREW Digest #4969
HOMEBREW Digest #4969 Thu 09 March 2006
FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Digest Janitor: pbabcock at hbd.org
***************************************************************
THIS YEAR'S HOME BREW DIGEST BROUGHT TO YOU BY:
Northern Brewer, Ltd. Home Brew Supplies
Visit http://www.northernbrewer.com to show your appreciation!
Or call them at 1-800-681-2739
Support those who support you! Visit our sponsor's site!
********** Also visit http://hbd.org/hbdsponsors.html *********
Contents:
Re: Subject: fastening stainless steel mesh (Thom Cannell)
Disappearing hop aroma (Signalbox Brewery)
fastening stainless steel mesh ("Joe Aistrup")
Re: Disappearing hop aroma (Jeff Renner)
11th annual South Shore Brewoff - reminder ("jeff_ri")
Re: Disappearing Hop Aroma (Fred L Johnson)
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* The HBD Logo Store is now open! *
* http://www.hbd.org/store.html *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Suppport this service: http://hbd.org/donate.shtml *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Beer is our obsession and we're late for therapy! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Send articles for __publication_only__ to post@hbd.org
If your e-mail account is being deleted, please unsubscribe first!!
To SUBSCRIBE or UNSUBSCRIBE send an e-mail message with the word
"subscribe" or "unsubscribe" to request@hbd.org FROM THE E-MAIL
ACCOUNT YOU WISH TO HAVE SUBSCRIBED OR UNSUBSCRIBED!!!**
IF YOU HAVE SPAM-PROOFED your e-mail address, you cannot subscribe to
the digest as we cannot reach you. We will not correct your address
for the automation - that's your job.
HAVING TROUBLE posting, subscribing or unsusubscribing? See the HBD FAQ at
http://hbd.org.
LOOKING TO BUY OR SELL USED EQUIPMENT? Please do not post about it here. Go
instead to http://homebrewfleamarket.com and post a free ad there.
The HBD is a copyrighted document. The compilation is copyright
HBD.ORG. Individual postings are copyright by their authors. ASK
before reproducing and you'll rarely have trouble. Digest content
cannot be reproduced by any means for sale or profit.
More information is available by sending the word "info" to
req@hbd.org or read the HBD FAQ at http://hbd.org.
JANITORs on duty: Pat Babcock (pbabcock at hbd dot org), Jason Henning,
and Spencer Thomas
----------------------------------------------------------------------
Date: Wed, 08 Mar 2006 22:29:38 -0500
From: Thom Cannell <Thom at CannellAndAssociates.com>
Subject: Re: Subject: fastening stainless steel mesh
> Subject: fastening stainless steel mesh
I've done this many times. You can silver solder it neatly. As the mesh is
thin (assuming something like screen-door mesh) I'd use vice grips to clamp
two areas and spot solder in between. Surprisingly pure bees wax works well
as a flux, as does normal acid flux which is harder to clean off. FWIW, the
more silver, the easier it melts.
Crimping with normal home tools is pretty tough. Sewing works OK, too.
Thom Cannell
T_Cannell sometimes compuserve.com
Thom near CannellAndAssociates.com
------------------------------
Date: Thu, 09 Mar 2006 12:12:13 +0000
From: Signalbox Brewery <signalbox.brewery at ntlworld.com>
Subject: Disappearing hop aroma
Fred Johnson laments the fading of hop aroma.
I can't help from experience, but two thoughts occur:
Would first wort hops be more stable? - anyone?
Has anyone noticed the phenomenon where hop aroma
goes away and comes back. This was mentioned at a recent
meeting of the East Anglian Craft Brewers (UK).
Also, how warm or cool do you store your beer?
Maybe worth keeping competition samples in a fridge?
David Edge, Derby
------------------------------
Date: Thu, 09 Mar 2006 16:06:09 -0600
From: "Joe Aistrup" <joe_aistrup at msn.com>
Subject: fastening stainless steel mesh
Aaron asks:
"I am in the process of fabricating some brewing equipment out of type 316
stainless steel mesh, 20 X 20 and 32 X 32. What is the best way to form
shapes out of the mesh? Is it possible to solder/weld the mesh? Is it
better to try to sew it somehow? i can of course crimp it, but i don't
think that will be as secure as i would like it."
A few weeks ago I wanted to fashion my own "hop-stopper" out of stainless
steel mesh. (My apologies to Doug Collins) First, I made a pattern for my
project out of card board, including the folds and cuts. I then used this
pattern, like a tailor uses a paper pattern to make a dress, to fabricate
the project.
All my seams were folded together, crimped by hand, and then to keep the
seams together, I used a few stainless steel rivets. The stainless steel
mesh was actually easier to use than I expected.
As a side note, the original hop stopper is round, mine is square. I have
used it three times. It works like a charm.
Joe Aistrup
Little Apple Brew Crew
Manhattan KS
------------------------------
Date: Thu, 9 Mar 2006 17:12:43 -0500
From: Jeff Renner <jsrenner at umich.edu>
Subject: Re: Disappearing hop aroma
Fred L Johnson <FLJohnson52 at nc.rr.com> writes from Apex, North
Carolina, USA:
> Are there any tricks to maintaining fresh hop aroma in beer from
> either
> late hop additions or dry hopping? I have been having difficulty
> keeping that wonderful aroma in my pale ales. It doesn't seem to
> matter
> whether I'm putting in aroma as late hopping, hop backing, or dry
> hopping. In a few weeks, the aroma is gone.
This is just about a text book description of the effects of
oxidation. They aren't always the obvious cardboardy or papery
aroma. They can be more subtle, rendering a previously wonderful
beer just sort of dumb.
I think you are just going to have to be very diligent in removing
sources of oxidation from your process. You no doubt know the usual
- avoid splashing whenever the mash or wort is hot, avoid
incorporating air into the mash when you stir it, don't splash the
beer when racking it, etc. If you are kegging, be sure to purge the
keg with CO2 before racking into it, and then purge the top space.
Another trick that I have taken to using, more for insurance than to
remedy any problem, is to use a crushed Campden (potassium
metabisulfite) tablet in the mash as an anti-oxidant.
And finally, if you are bottling, bottle condition - don't fill from
the keg, even with a counter-pressure filler. I am convinced that we
as homebrewers cannot fill bottles without introducing damaging
levels of O2 unless we invest in one of those expensive Zahm & Nagel
fillers http://www.zahmnagel.com/9000.html.
Check out my post http://www.hbd.org/hbd/archive/4578.html#4578-6,
which includes some references to George Fix's comments on CP
bottling and O2. George's original post, which I said in my post I
would find, is at http://www.hbd.org/hbd/archive/1802.html#1802-15.
Jeff
- ---
Jeff Renner in Ann Arbor, Michigan USA, jsrennerATumichDOTedu
"One never knows, do one?" Fats Waller, American Musician, 1904-1943
------------------------------
Date: Thu, 9 Mar 2006 20:42:00 -0500
From: "jeff_ri" <jeff_ri at cox.net>
Subject: 11th annual South Shore Brewoff - reminder
Hi All,
This is a reminder that the 11th annual South Shore Brewoff is coming up
on Saturday, April 1st in Mansfield, MA. All of the entry and judging
information and forms are on the club website
(http://www.southshorebrewclub.org).
The entry deadline is Friday, March 17th.
Jeff McNally
Tiverton, RI
------------------------------
Date: Thu, 9 Mar 2006 21:28:15 -0500
From: Fred L Johnson <FLJohnson52 at nc.rr.com>
Subject: Re: Disappearing Hop Aroma
Thanks to Jeff for his recommendations on how to avoid oxidation. Since
Jeff is convinced that I have a textbook case of oxidation, I'm going
to assume this is the problem and go all out to kill it.
I think I have a really serious problem with this, as every beer I brew
goes through the Great-to-Lousy stage in a very short time. I think I'm
going to go to some extreme measures to prove to myself that this is my
problem.
I've used metabisulfite in the mash for a long time now, and this
hasn't really helped me. Nevertheless, I'll add it to my mash and a
little to the hot liquor for sparging and mashing in.
On the hot side, I will:
Mash with NO stirring whatsoever and live with whatever efficiency this
gives me.
Transfer the mash VERY slowly to my lauter tun.
Immediately cover the mash with a couple of inches of water.
Carefully circulate the wort to clear.
Carefully sparge to the kettle keeping a couple of inches of water on
top of the grist all the time.
On the cold side, I will:
Not transfer to a secondary fermentor
Not open the primary carboy fermentor until I'm ready to bottle.
Bottle extremely slowly if possible. (I can't think of a practical way
to purge the bottles with CO2.)
Use some oxygen absorbing caps if I can find them.
Fred L Johnson
Apex, North Carolina, USA
------------------------------
End of HOMEBREW Digest #4969, 03/09/06
*************************************
-------
