Copy Link
Add to Bookmark
Report
HOMEBREW Digest #4515
HOMEBREW Digest #4515 Wed 07 April 2004
FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Digest Janitor: janitor@hbd.org
***************************************************************
THIS YEAR'S HOME BREW DIGEST BROUGHT TO YOU BY:
Beer, Beer, and More Beer
Visit http://morebeer.com to show your appreciation!
Support those who support you! Visit our sponsor's site!
********** Also visit http://hbd.org/hbdsponsors.html *********
Contents:
Philly Homebrew Competition reminder ("Joe Uknalis")
San Antonio Visit (Rob Zamites)
Re: 5 layered Black and Tan (ODB OAK BARREL STOUT) ("Ken Taborek")
Visit to Munich (Thomas Rohner)
Curious Yeast Behaviour ("William Erskine")
adding H20 to the kettle (darrell.leavitt)
Quick Beers (Alexandre Enkerli)
Where am I? ("River Bound Brewing")
Re: Water salts: kettle vs. mashtun (Jeff Renner)
Re: Re: session beer recipe (Jeff Renner)
Re: head retention (Jeff Renner)
HELP!! (Himsbrew)
Where I am at! (Lee Ellman)
Cheap Refrigerator Temperature Controller ("Spencer Graham")
Call for Judges - AHA Southern Regional (Bev Blackwood II)
dry yeast (Mark Beck)
Where in the world? (Bev Blackwood II)
Dry hopping problem ("Dan Hansen")
re: session beer recipe ("Tom M")
pumps ("Greg Hunter")
beer & health (again) ("-S")
Barrel Aged (David Perez)
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* The HBD Logo Store is now open! *
* http://www.hbd.org/store.html *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Suppport this service: http://hbd.org/donate.shtml *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Beer is our obsession and we're late for therapy! *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Send articles for __publication_only__ to post@hbd.org
If your e-mail account is being deleted, please unsubscribe first!!
To SUBSCRIBE or UNSUBSCRIBE send an e-mail message with the word
"subscribe" or "unsubscribe" to request@hbd.org FROM THE E-MAIL
ACCOUNT YOU WISH TO HAVE SUBSCRIBED OR UNSUBSCRIBED!!!**
IF YOU HAVE SPAM-PROOFED your e-mail address, you cannot subscribe to
the digest as we cannot reach you. We will not correct your address
for the automation - that's your job.
HAVING TROUBLE posting, subscribing or unsusubscribing? See the HBD FAQ at
http://hbd.org.
LOOKING TO BUY OR SELL USED EQUIPMENT? Please do not post about it here. Go
instead to http://homebrewfleamarket.com and post a free ad there.
The HBD is a copyrighted document. The compilation is copyright
HBD.ORG. Individual postings are copyright by their authors. ASK
before reproducing and you'll rarely have trouble. Digest content
cannot be reproduced by any means for sale or profit.
More information is available by sending the word "info" to
req@hbd.org or read the HBD FAQ at http://hbd.org.
JANITOR on duty: Pat Babcock and Spencer Thomas (janitor@hbd.org)
----------------------------------------------------------------------
Date: Mon, 5 Apr 2004 21:00:36 -0400
From: "Joe Uknalis" <birman at netaxs.com>
Subject: Philly Homebrew Competition reminder
Dear Beer folks-
Just a reminder that Homebrewers of Philly & Suburbs is having thier 21st
annual competition on 4/24/04. BJCP sanctioned. Entries are $6 each and
due by 4/17. Prospective judges & stewards are encouraged to contact Joe at
birman at netaxs.com
full details at:
http://www.hopsclub.org/
thanks
Joe
------------------------------
Date: Tue, 6 Apr 2004 23:16:00 -0500
From: Rob Zamites <popeye at zamites.net>
Subject: San Antonio Visit
Hello all! Been years since I've posted, and it's nice to be back....
Spencer Thomas told us:
> The usual: I'll be in San Antonio for a conference, and would like to
> meet other homebrewers. Evenings of April 19-23 are more-or-less
> open. (23rd my boss might be there, 21st & 22nd look to have evening
> conference activities.) Recommendations on brewpubs are also
solicited.
Well, I'm a homebrewer, and odds are I will be in town on the dates you
stated, unless something drastic (like sudden employment) happens. A
cool place to meet homebrewers and drink a few good beers is at San
Antonio Homebrew Supply. The proprietor, Todd Huntress, is a
knowledgeable fellow, and generally has 4-6 very good guest beers on
tap.
Poor San Antonio, though, has only one brewpub, Blue Star Brewing. The
beers are pretty good, not the best I've had, but not insipid and
lackluster as some other pubs I've visited. You can find them online at
http://www.bluestarbrewing.com ... The former Laboratory Brewing
Company is re-opened now under the name "Cementville", with master
brewer Paul Farnsworth heading up the brewery operations. However, they
haven't even gotten a start on the construction phase of the brewhouse
(but the equipment is there) *sigh*
That is all.
* * * * * * * * * * * * * * * * * * * * * * * * * *
Rob Zamites
Converse, Texas USA
[1194.7, 227.1] Apparent Rennerian
* * * * * * * * * * * * * * * * * * * * * * * * * *
------------------------------
Date: Wed, 7 Apr 2004 01:40:35 -0400
From: "Ken Taborek" <Ken.Taborek at verizon.net>
Subject: Re: 5 layered Black and Tan (ODB OAK BARREL STOUT)
[rdavis77 said, snipped]
> (by the way their OAK BARREL STOUT is now in bottles (as of March 25), I
> think the only brewer in America to have worked out a bottled formula
> for stout conditioned in bourbon barrels....really delicious) Those in
> the mid-Atlantic region look for it in stores....(no I don't work for
> Old Dominion!))
rdavis77,
While I'm a great fan of ODB, and I am firmly of the opinion that their Oak
Barrel Stout is one of the best beers in the world, I don't believe that the
bottled version of their Oak Barrel Stout ever sees the inside of a bourbon
barrel.
I could be wrong, but I've spoken with the bartenders, brewers, and the
general manager many times over the past year or so on the topic of their
attempts to find a recipe that can be mass produced to a degree that will
allow them to bottle Oak Barrel Stout (the 'original' Oak Barrel Stout is
available only on draft in their brew pub, stop in and try it, you'll be
bringing home a growler. And no, I don't work for ODB either). What I've
gathered is that they have tried to capture the flavors that are imparted by
the bourbon barrels, in a way that will allow for a larger volume of
production than their current method of aging a finished beer for three
weeks in barrels that were used for aging bourbon. Reading from the back
label of their newly bottled Oak Barrel Stout, it would appear that they've
found that the flavor of the barrel aging can be approximated by the use of
vanilla beans and oak. I'll need to confirm that the next time I have a
chat with the brewers or GM.
I've recently purchased a six of the new Oak Barrel Stout, and I find it to
be very good. I'm not a certified beer judge, but both myself and my
fiancee find it to have less body than the draft version, and a slightly
different taste. It's still a fine product, and if I weren't 30 minutes
from the brewery I would buy more of the bottled version. Since I am so
close, I'll keep filling my growlers with the original. :)
- --
Cheers,
Ken
PS: How do you manage to keep your Erol's address? RCN is trying so very
hard to eliminate them in favor of at rcn.com addresses...
------------------------------
Date: Wed, 07 Apr 2004 09:41:42 +0200
From: Thomas Rohner <t.rohner at bluewin.ch>
Subject: Visit to Munich
Hi Guys
has anyone been in Munich recently?
Do you have some suggestions what places to visit.
I'll be there the weekend after easter.
Thanks Thomas
------------------------------
Date: Wed, 7 Apr 2004 06:21:41 -0400
From: "William Erskine" <werskin at sympatico.ca>
Subject: Curious Yeast Behaviour
Hi All,
I am curious about the behaviour of my most recent
batch of beer which is currently on day 8 of a primary
fermentation. It's an all grain pale ale OG 1.048.
I pitched a White Labs WLP002 English Ale
Yeast (pitchable tube). Currently, it is down to about
a bubble every 45 secs or so. But there is something
very unusual, little white pieces of something (crud)
are being shot off the bottom of the carboy like rockets.
They travel very quickly about half way up and then float
back to the bottom. It's very weird to watch, and one lifts
off about every 3 - 6 seconds.
Can someone explain what this is, and is it safe to rack
into the secondary? I am assuming it is and plan to do it
tomorrow night, but I am curious about this phenomenon.
Also, is there anywhere online that I can go to see what
people's experience with a particular yeast is? For
example, I am interested in this latest Yeast I've used.
I was looking on the White Labs Website and it's
description for the yeast seems off so far. It describes
a very strong flocculation, and I am seeing the opposite.
It doesn't seem to be flocculating well at all. And I
am not referring to the little rocket ships. The sediment
doesn't seem well formed or compacted at all. It is
clearing, just not with the characteristics that I expect.
I haven't tasted it yet. That'll be the important test.
Has anyone used this strain before? How did you like it?
I understand that it is perhaps the Fuller's ESB Strain?
Should be good. Looking forward to it.
All help is greatly appreciated.
Cheers,
William Erskine.
London, Ontario.
------------------------------
Date: Wed, 07 Apr 2004 06:12:47 -0400
From: darrell.leavitt at plattsburgh.edu
Subject: adding H20 to the kettle
MarMark Beck <beckmk at whitman.edu>
shares his recipe for a bitter ,...thankyou.
Why not add a bit more malt ...then collect more runoff, rather than
adding water to the kettle?
..Darrell
Plattsburgh,NY 44 41 58 N Latitude
73 27 12 W Longitude
[544.9 miles, 68.9]Apparent Rennerian
BTW: I had the pleasure of meeting Chad Stevens last night at the
Cumberland Head Brewery! He and his wife stopped by for a few
samples,...real good people...
------------------------------
Date: Wed, 7 Apr 2004 09:41:38 -0300
From: Alexandre Enkerli <aenkerli at indiana.edu>
Subject: Quick Beers
Jeff Renner said:
> I like to serve low gravity real ales fresh. I've served them in as
> little as
> five days "grain to brain," although that was in an emergency.
The quickest "grain to brain" turnaround I've heard of so far was 2.5
days for a Hefeweizen made by Daniel Chisholm in Fredericton, NB. As I
bottle, this impressed me even more than it would a kegger. Even if
fermentation is quick, I still need to wait for the beer to condition
in bottle. And I usually don't get around to bottling for a number of
days...
I've tasted Daniel's beer a month he had brewed it and his was quite
possibly the nicest example of hefeweizen I've had so far. Tasty yet
subtle, easily drinkable yet complex.
What are people's experiences with quick beers? Apart from low-gravity,
large amounts of yeast, and relatively high fermentation temperatures,
are there other factors involved?
Cheers!
AleX in Moncton, NB
[1568.9km, 68] Apparent Rennerian
------------------------------
Date: Wed, 7 Apr 2004 08:59:07 -0500
From: "River Bound Brewing" <RiverBound at charter.net>
Subject: Where am I?
The River Bound Brewery, which is in my garage here in St. Louis, is at
precisely [424.8, 236.8] Apparent Rennerian
Pat Reddy
- ---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.651 / Virus Database: 417 - Release Date: 4/5/2004
------------------------------
Date: Wed, 7 Apr 2004 10:28:31 -0400
From: Jeff Renner <jeffrenner at comcast.net>
Subject: Re: Water salts: kettle vs. mashtun
"Dave Draper" <david at draper.name> writes from Albeq, err, Alberq,
ahh, hell, ABQ:
>am I *really* out of the loop?!?
Yeah, but we'll help you get back up to speed. ;-).
>why would anyone want to add the salts to the kettle, when it seems
>pretty obvious that the salts must be present along with the
>compounds in the grain in order to have the desired effect?
We're advocating adding the salts directly to the mash, not to the
kettle, although as Spencer says, there might be times that would
work. I never do it.
Warning, serious scientific stuff follows that you might not
understand if you aren't a geologist. Wait a second, Dave, you are a
geologist, aren't you?
Normally you do add salts, like gypsum (CaSO4) and CaCl2, to the
strike water, but chalk, CaCO3, unlike those other two, is very
insoluble in water. But, if you mix it into the mash, the acidity of
dark grains dissolves it, which raises the pH of the mash. This is
the purpose of using it - for brewing dark beers with low alkalinity
water, which would ordinarily make the mash too acidic.
>Given that styles evolved from the presence of these compounds in
>the water before it was mixed with the grain during the mash, and
>not added to the
>wort once it was in the boiler, how would one expect to have the
>desired effect on things from doing so?
Of course, you are right, these dark styles (porter, stout, Munich
Dunkles, Edinburgh Scotch ales) did evolve by brewers who empirically
discovered over centuries of brewing that they could make better dark
beer than pale with their water. *They* certainly weren't adding
chalk to their mash.
But, they did live in areas of limestone and alkaline water. They
were brewing with water that had picked up CO2 from falling through
the atmosphere as rain, then more CO2 from subterranean bacteria,
producing carbonic acid. This weakly acidic water seeped through
limestone/chalk (both are CaCO3) soils, which dissolved some CaCO3,
producing bicarbonate ions HCO3-1, which makes the water alkaline.
If you wanted to mimic water from these dark beer areas, you could
suspend (not dissolve) CaCO3 in water and bubble CO2 through it until
it dissolved, duplicating nature. Or you can make life simple and
add it to the mash.
But you knew all this already, you were just temporarily out of the loop.
Did I just hear the sound of a hand slapping a forehead down in New Mexico? ;-)
Jeff
- --
Jeff Renner in Ann Arbor, Michigan USA, JeffRenner at comcast.net
"One never knows, do one?" Fats Waller, American Musician, 1904-1943
------------------------------
Date: Wed, 7 Apr 2004 10:40:00 -0400
From: Jeff Renner <jeffrenner at comcast.net>
Subject: Re: Re: session beer recipe
Mark Beck <beckmk at whitman.edu> writes from Walla Walla, Wash.
(does anyone else remember Pogo's "Nora's Freezin' on the Trolley"?)
>a key to serving a good bitter, in my opinion, is low carbonation
>and serving at the right temp. Too carbonated and too cold
>accentuates the bitterness, while masking the malt and hop character.
Amen, Brother. Preach it!
Another trick for the right temperature is to keep some heavy pub
"dimple" mugs in the freezer and draw the warmish beer into them. Of
course, you have to have a mug for each pint you are going to have as
this only works once.
>I know the gravity and alc % of my beer are slightly high for a true
>session beer--it's more of a Special Bitter than an Ordinary Bitter.
>Next time I brew this I'm going to lower the gravity and try and
>keep the mash temp up (fluctuated between 148-152 degrees, and I'd
>like it to stay at the higher end.)
You can also keep the final gravity up a bit (and the alcohol down)
by using a less attenuative yeast than Danstar Nottingham. The 80%
attenuation you got is typical of this yeast
http://consumer.lallemand.com/danstar-lalvin/nottingham.html. If you
like dry yeast, try Danstar Windsor
http://consumer.lallemand.com/danstar-lalvin/windsor.html.
Thanks for the contribution to this thread.
Jeff
- --
Jeff Renner in Ann Arbor, Michigan USA, JeffRenner at comcast.net
"One never knows, do one?" Fats Waller, American Musician, 1904-1943
------------------------------
Date: Wed, 7 Apr 2004 10:51:05 -0400
From: Jeff Renner <jeffrenner at comcast.net>
Subject: Re: head retention
Todd in Idaho, masquerading as "Janie Curry" <houndandcalico at
hotmail.com> (is he the hound or the calico?), writes:
>I clean my bottles with powdered dish washer detergent at 140 F and rinse
>well...I've read that pdwd can be detrimental to head retention but I will
>change this practice on my next batch.
Try some of the brewing cleaners such as One-Step or PBW, or just
bleach. Of course, be sure to rinse well if you use bleach. Make
sure your glasses are well washed and rinsed. But this is not likely
the problem if you are indeed rinsing well.
>I also use Ferm-Cap
Not supposed to be a problem, and even is supposed to help.
>I brew ales and typically do a George Fix style 3 step mash schedule with
>the first step at around 95-100F x 30min to degrade beta glucans avoiding a
>stuck mash.
I think even George stopped using the protein rest (122F). This can
really do a number on head forming and mouth feel proteins with
modern malts. Are you resting there? Or are you using his later
40/60/70C (104/140/158F) schedule and skipping the 50C/122F protein
rest?
If you are doing the 40/60/70C schedule, how are you getting from the
first step to 140F? If you are heating and recirculating, you may be
spending too much time in the proteolytic range and destroying
proteins. If you are adding boiling water, that should be OK, but
then you may be really overdiluting your mash by the time you add
enough to get to 158F.
I suggest eliminating any rest below ~144F. The old "acid rest" or
hydrolysis rest of ~100F is just not necessary for modern malts (nor
is the protein rest). It doesn't hurt, it's just a problem getting
from there to the sacch. rest.
Good luck.
Jeff
- --
Jeff Renner in Ann Arbor, Michigan USA, JeffRenner at comcast.net
"One never knows, do one?" Fats Waller, American Musician, 1904-1943
------------------------------
Date: Wed, 07 Apr 2004 11:11:11 -0400
From: Himsbrew at aol.com
Subject: HELP!!
Hello all..
was hoping to enter my recently brewed Irish
red ale in the national homebrew contest.
Upon looking at the style guide lines I
don't know what category(in any) would be
appropriate!
Help!! deadline looms!
private responses welcome also!
jim cuny
himsbrew at aol.com
------------------------------
Date: Wed, 7 Apr 2004 12:00:54 -0400
From: Lee Ellman <lee.ellman at cityofyonkers.com>
Subject: Where I am at!
Hi. While I don't post that often I do faithfully read
the digest and truly appreciate the knowledge base
and civility by all. I often come away from my read
wishing that I could find the perfect party that would
be as well modulated and interesting as the digest.
That said, I am from Yonkers NY home of the long gone
Yonkers Brewing Co., and their famous dry beer "YB Dry".
Oh, and also of the current Saw Mill River Brewing micro
and my very own pico Tudor Woods Brewing Co.
------------------------------
Date: Wed, 07 Apr 2004 12:09:39 -0400
From: "Spencer Graham" <Spencer.Graham at mail.wvu.edu>
Subject: Cheap Refrigerator Temperature Controller
I have been thinking about delving into lager beers and know that
temperature control is a key issue. I am also a ham radio operator and
have built many radio kits and other electronic devices over the years
as part of that hobby. A company called Rainbow Kits (see link below)
has several kits for measuring temperature and controlling temperature,
and I would like someone to take a look at those kits to see if they
think the one kit for temperature control would be useful for converting
a refrigerator to a lagering environment. I saw several commercial
units listed in a brewing magazine and they are about $60+ and thought
this might be a nice and cheaper way for brewers to control their
refrigerators. Less than $10 is a heck of a difference in price. (They
also have a kit that converts a digital VOM into a very precise
thermometer!) Thought I would pass it on HBD for consideration.
http://www.rainbowkits.com
Spence
Morgantown, West By Gawd Virginia
Spencer W. Graham, II MBA
Media Specialist
West Virginia University Extended Learning
One Waterfront Place
1st Floor
Room 1500-D
P.O. Box 6877
Morgantown, West Virginia 26506
(304) 293-1305 Extension 3#
Life is not a journey to the grave with the intention of arriving all
pretty and preserved, but rather to skid in broadside, thoroughly used
up, totally worn out and loudly proclaiming---"WOW! What a ride!" --
Anonymous
------------------------------
Date: Wed, 7 Apr 2004 13:36:18 -0500
From: Bev Blackwood II <bdb2 at bdb2.com>
Subject: Call for Judges - AHA Southern Regional
The AHA Southern Regional Judging will take place at Saint Arnold
Brewery on April 24th & 25th 2004.
Site coordinator is Bev Blackwood of Houston's Foam Rangers, the AHA
Liaison for Houston.
DO NOT SEND ENTRIES to the judging site!
Entries should be sent to:
AHA Southern Regional c/o DeFalco's Home Wine & Beer Supplies, 8715
Stella Link, Houston, TX 77025.
Schedule of events:
Saturday, April 24th
9:00 a.m. - Noon 1st Session
12:30 p.m. - 5:00 p.m. Mini Pub Crawl (Transportation provided)
5:30 p.m. - 10:00 p.m. 2nd Session
Sunday, April 25th
10:00 a.m. - 6:00 p.m. 3rd Session (Lunch provided)
If you're coming from out of town, there are two hotels located close
to Saint Arnold Brewery.
La Quinta Inn Houston Brookhollow, 11002 Northwest Freeway (Hwy 290),
Phone: (713) 688-2581
or
Houston Northwest Motel 6, US Route 290 at 5555 West 34th Street,
Phone: (713) 682-8588
Saint Arnold Brewing Company is Texas' oldest microbrewery and is
located at 2522 Fairway Park Drive, Houston, Texas 77092
If you're coming from out of town, let me know and I'll see if we can
arrange any "beds for brewers," but be prepared to get a room should
that not work out. Thanks for your assistance!
-BDB2
Houston Liaison
American Homebrewers Association
http://www.beertown.org/homebrewing/index.html
------------------------------
Date: Wed, 07 Apr 2004 12:29:49 -0700
From: Mark Beck <beckmk at whitman.edu>
Subject: dry yeast
In his reply to my post on session beers Jeff Renner writes:
>You can also keep the final gravity up a bit (and the alcohol down) by
>using a less attenuative yeast than Danstar Nottingham. The 80%
>attenuation you got is typical of this yeast
>http://consumer.lallemand.com/danstar-lalvin/nottingham.html. If you like
>dry yeast, try Danstar Windsor
>http://consumer.lallemand.com/danstar-lalvin/windsor.html.
>
Thanks for the tip Jeff. I'll look for the Windsor, but I'm not sure if my
homebrew supplier carries it. One other yeast that I know I can get (and
haven't tried yet, but intend to) is Safale S-04. Does anyone know what
the apparent attenuation of this yeast is? I looked on the Crosby & Baker
and DCL websites and the attenuation isn't listed. Crosby & Baker gives an
email address, so I guess I'll email them and report back what I learn.
Mark Beck
Walla Walla, WA
------------------------------
Date: Wed, 7 Apr 2004 14:36:27 -0500
From: Bev Blackwood II <bdb2 at bdb2.com>
Subject: Where in the world?
> Jeff Renner requesteth:
> It's time for my semi-annual request that posters tell us their name
> and location.
Bev Blackwood - Homebrewer, Competition Coordinator & Was-was-was-Waz
of the Foam Rangers, KGB Double agent, Single malt scotch collector,
Contributing editor, Southwest Brewing News, beer writer, AHA Houston
area Liaison and proud promoter of the world's largest single site
homebrew competition, The Dixie Cup!
[1050.8, 217.5] Apparent Rennerian, otherwise known as Houston, Texas.
-BDB2
Bev D. Blackwood II
Co-Competition Coordinator
The Foam Rangers
http://www.foamrangers.com
------------------------------
Date: Wed, 7 Apr 2004 13:08:54 -0700
From: "Dan Hansen" <dan at hansen.org>
Subject: Dry hopping problem
I made the mistake of adding hop pellets to my secondary thinking that
they would settle out. WRONG! Most of the hops settled out, but the
hops that are left plug the poppet valve in the keg, completely closing
off any flow. Believe me, I won't make that mistake again. Now, to
problem at hand, how do I save my batch of beer? I see Zymico has a
product called a hopperstopper that is a screen that is placed on the
end of the dip tube, but it's not for commercial resale. Does anyone
know of a commercial product available to screen out the hops, or is
there a work around that someone could suggest?
Thanks
Dan
------------------------------
Date: Wed, 7 Apr 2004 16:14:21 -0400 (EDT)
From: "Tom M" <tomomeier at excite.com>
Subject: re: session beer recipe
Mark Beck wrote:
>Since he liked his brew so much, I'd ask Tom to post his
>recipe.
I looked at many recipes in Wheeler and Protz's great
books. There is nothing consistent between the various
interpretations, so I settled on just using some crystal,
but with no adjuncts so I would not have to mini-mash.
Extremely simple recipe.
Recipe for 11 gallons:
Base Grains mashed at ~151-152F* (?)
98% Marris-Otter*
2% Carahelles (10L crystal)*
Steeping grains - 14 oz of 40L crystal
*The base wort was mashed on Yazoo Brewing's commercial
system as part of a Nashville HB event. This is the
main reason it turned out so tasty. Many thanks to
our gracious hosts Linus and Lila Hall. Your kindness
is second only to the quality of your beers!
Post Boil OG - 1.042
Bittering hops - EKG to 20 IBU
Flavor hops - 1oz of EKG at 10min before kko
Yeast - I used a 4oz glob of Yazoo's house yeast, a
british ale yeast. Closest match to my taste would
be WL-002.
Fermented at 60F external to the fermentor for 11 days,
racked to 5.5 gallon vertical pin, 1/2 cup of table
sugar, stored at room temp for 4 days, then moved to 60F,
chilled to 48F before driving in soft spile, 24 hours
later tapped and served at 52F.
- --
I noticed the thread about Oak Barrel Stouts. Some
fellow HB'ers and I brewed a barrel of Imperial Stout
that has been aging in a JD barrel. It started to
pick up vanilla from the oak at about 5 months.
As a commercial venture, this would tie-up a large
amount of space, not to mention take forever to age.
Anyone who produces it should be commended for their
patience and willingness to forgo profits and conven-
ience in pursuit of a higher purpose.
An easier way to produce it may be to steep bourbon
barrel char in the secondary. As rdavis77 mentioned,
vanilla is also a necessary component. There was an
address and phone # for bourbon char in the May 2003
BYO article on barrel aging. It is basically the
scrapings from inside the charred barrel - which is
what gives american whiskey and bourbon most of its
flavor.
Tom Meier
Nashville, TN
------------------------------
Date: Wed, 7 Apr 2004 18:48:11 -0400
From: "Greg Hunter" <ghunter at adelphia.net>
Subject: pumps
I am interested in getting a pump for moving wort. I can't afford a
peristaltic pump and have seen numerous mag drive pumps on ebay. Is
there any particular type of mag drive pump I should look for? I have
seen some garden/pool type pumps and was wondering if these were ok for
pumping hot wort?
Gregory F. Hunter
P.O. Box 291-A
Duxbury, MA 02331
ghunter at adelphia.net
654.3 86.2 rennerian
------------------------------
Date: Wed, 7 Apr 2004 19:58:31 -0400
From: "-S" <-s at adelphia.net>
Subject: beer & health (again)
Here is another article on the benefits of moderate drinking:
http://snipurl.com/5j9z
Gotta take my vitmains & minerals !
later,
-S
------------------------------
Date: Wed, 07 Apr 2004 20:32:04 -0400
From: David Perez <perez at gator.net>
Subject: Barrel Aged
Speaking of barrel aged ale, has anyone tried the Old Engine Oil Special
Reserve? It is aged six months in "Malt Whisky Casks". I picked up a few
bottles to give it a try but don't know much about it's quality other
than it is supposedly a bit tannic. I was thinking about opening one at
our next club meeting and then aging the others for another 6 months to
a year, to see if they smooth out.
Dave Perez
Hogtown Brewers
Gainesville, FL
------------------------------
End of HOMEBREW Digest #4515, 04/07/04
*************************************
-------
