Copy Link
Add to Bookmark
Report
HOMEBREW Digest #4253
HOMEBREW Digest #4253 Fri 23 May 2003
FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Digest Janitor: janitor@hbd.org
***************************************************************
THIS YEAR'S HOME BREW DIGEST BROUGHT TO YOU BY:
Northern Brewer, Ltd. Home Brew Supplies
http://www.northernbrewer.com 1-800-681-2739
Support those who support you! Visit our sponsor's site!
********** Also visit http://hbd.org/hbdsponsors.html *********
Contents:
Re: Size matters? ("Kent Fletcher")
Re: Fort Worth water ("Dean Fikar")
Ooh, ooh, I know this one! (Beechwood vs Oak) ("John O'Connell at Work")
DC brewpubs (Robert Sandefer)
Fat Tire ("Mike Racette")
Talk about timing....(barrel aging discussion) ("Andy Mikesell")
RE: Good beer in DC (Jim Wilson)
Fw: predicting flavor ("Chad Stevens")
*
* Show your HBD pride! Wear an HBD Badge!
* http://hbd.org/cgi-bin/shopping
*
* The HBD Logo Store is now open!
* http://www.cafeshops.com/hbdstore
*
* Beer is our obsession and we're late for therapy!
*
Send articles for __publication_only__ to post@hbd.org
If your e-mail account is being deleted, please unsubscribe first!!
To SUBSCRIBE or UNSUBSCRIBE send an e-mail message with the word
"subscribe" or "unsubscribe" to request@hbd.org FROM THE E-MAIL
ACCOUNT YOU WISH TO HAVE SUBSCRIBED OR UNSUBSCRIBED!!!**
IF YOU HAVE SPAM-PROOFED your e-mail address, you cannot subscribe to
the digest as we cannot reach you. We will not correct your address
for the automation - that's your job.
HAVING TROUBLE posting, subscribing or unsusubscribing? See the HBD FAQ at
http://hbd.org.
The HBD is a copyrighted document. The compilation is copyright
HBD.ORG. Individual postings are copyright by their authors. ASK
before reproducing and you'll rarely have trouble. Digest content
cannot be reproduced by any means for sale or profit.
More information is available by sending the word "info" to
req@hbd.org or read the HBD FAQ at http://hbd.org.
JANITOR on duty: Pat Babcock and Karl Lutzen (janitor@hbd.org)
----------------------------------------------------------------------
Date: Thu, 22 May 2003 01:11:24 -0700
From: "Kent Fletcher" <kfletcher@socal.rr.com>
Subject: Re: Size matters?
Mike wondered if his ol' Coleman cooler would suffice for a ten gallon
batch:
> Off the top, what size cooler do you need to work a 10 gallon batch of
> all-grain beer? I have an old rectangular Coleman cooler (the kind with
the
> metal locking thing on it..) that I've used to do 5 gallon batches and
it's
> always been adequate for that.. but it's been a while since I've brewed,
and
> I can't rmember if it was half full, or just over or under half full.. so
> I'm wondering now if my 10 gallons is going to all fit in there. Before I
> strees out tryint to measure it.. does anyone happen to know?
Mike,
I use a 54 quart rectangular cooler, it's probably in the same size range
you have, though the insulation is probably better on mine. Five gallon
batches are really almost too small, with a mash depth of maybe 6 inches.
Ten gallon batches of 1.050-60 gravities don't come close to filling it.
The biggest mash done in it was 28 pounds of malt for a 22 gallon batch of
Bitter. It WAS filled to the brim with that batch, but it was also a fairly
wet mash, as I was HERMSing it to get a mash-out step. So, with capacity
for 28 pounds, you should be able to get ten gallon batches of 1.080 or more
for a Tripel, Wee Heavy, etc., with no "strees" at all!
Hope that helps,
Kent Fletcher
------------------------------
Date: Thu, 22 May 2003 07:13:28 -0700
From: "Dean Fikar" <dfikar@charter.net>
Subject: Re: Fort Worth water
>Hello all...I was wondering if anybody out there has or has seen a
>chemical analysis of the water from Ft. Worth? I live in central Texas
>and am not really pleased with my brewing efforts using the local water
>(hardness ~180, alkalinity ~110). I think I have convinced myself that
>this could be the source of the characteristic "flavor" (harsh-bitter)
>in all of my beers. The reason I ask about Ft. Worth water is that I
>can buy it from my firendly neighborhood Wal-Mart, so it would be a
>simple switch to make. Any info would be appreciated. Thanks!
>Augie Altenbaumer
Augie,
You probably will disappointed if you switch to FW water. For years I
have brewed with it and also have noticed harshness and increased
bitterness in lighter styles of beer. I have compensated by lowering
the IBU's by 20% or more from what is usually recommended for style.
Here is a 2001 composite analysis on FW water:
Calcium (ppm) 34 - 55
Chloride (ppm) 16 - 48
Magnesium (ppm) 3 - 10
Sodium (ppm) 13 - 37
pH (units) 7.8 - 8.7
Bicarbonate (ppm) 98 - 154
Carbonate (ppm) 0
Total Hardness as CaCO3 (ppm) 119 - 163
Total Alkalinity as CaCO3 (ppm) 80 - 126
Phenol Alkalinity as CaCO3 (ppm) 0
Total Dissolved Solids (ppm) 176 - 257
Sulfate (ppm) 36-47
As you can see, there is moderate hardness and sulfates are higher than
I'd like. I think that the combination makes for some harsh notes in
the lighter styles. That said, the water seems fine for hoppy amber
beers and the darker styles. Dortmunders are also good with FW water.
I think it makes for excellent Scotch and Scottish ales.
I think that when I start brewing again (I'll be coming off of a long
hiatus) I am going to start using mainly RO water for anything milder
than a pale ale.
Dean Fikar
Fort Worth, TX
------------------------------
Date: Thu, 22 May 2003 11:03:11 -0400
From: "John O'Connell at Work" <oconn@mindspring.com>
Subject: Ooh, ooh, I know this one! (Beechwood vs Oak)
To all:
>>Anyone know how Dixie's process differs from Anhauser?
I've seen the beechwood. Imagine what putting a fresh baseball bat through
a giant carrot peeler looks like. It is A-B's sole anachronism in its
brewing process, used because it sounds nice on the label and in ads, and
it is flavor-neutral.
The beechwood was, to my best recollection, an old-school clarifier and
flocculation assistant. It does still do part the job, (the used strips
were wet and slimy) but other parts of their brewing process are relied on
to finish it. Beechwood is therefore about as much a flavor component as
Irish moss.
I'm not sure if cypress isn't in the same category, really. Dixie's use
would seem to be a holdover from the days of cypress tanks (the wood was
plentiful, rot resistant and dense-grained, perfect for tanks in the days
before stainless). These woods were chosen for their non-flavoring
character. They've been kept around because "stainless steel aged" just
doesn't sing.
Oak, especially charred oak, is a completely different story. Scotch would
look like vodka without it...
John
------------------------------
Date: Thu, 22 May 2003 13:51:09 -0400
From: Robert Sandefer <melamor@vzavenue.net>
Subject: DC brewpubs
In the Northern Virginia/DC area, I like Capital City Brewing. I prefer the
one in Shirlington (it's listed on their website as Arlington, VA) to the
one in DC (11th and H St.), though both are good. The Shirlington store IMO
has better service. The food is good, and the beers are fine. See
www.capcitybrew.com
I personally avoid the Rock Bottom Brewery in Ballston Mall. The food was
horrible on my last two visits, and the beers are unimpressive.
Robert Sandefer
Arlington, VA
------------------------------
Date: Thu, 22 May 2003 12:55:31 -0600
From: "Mike Racette" <mike.racette@hydro-gardens.com>
Subject: Fat Tire
On Wed, 21 May 2003 11:44:52 -0400 (EDT)
Bob from Brew Wisconsin <brewwisconsin@yahoo.ca>
wrote:
"And here's the issue: Yes, great brewery....
FANTASTIC brewer/brewery, great people... But Flat
Tire is their least interesting beer. Tripel, Abbey,
Folie, Brussels Black, et cetera... Pick just about
anything from that brewery EXCEPT for that one.
Maybe Fat Tire is the mass market product that
provides the cash flow that makes it easier for NBB to
do everything else, but then you have to decide what
you're honouring. Is it respect for their marketing
ability, or the distinctiveness of their beers?
Considering that we're talking about something for a
homebrewing magazine, I think you have an audience
receptive to distinctive beers rather than merely what
sells to Bud drinkers with extra discretionary income
and who are a little more image conscious to want to
be seen drinking a craft beer without challenging
their taste "buds" too much."
I agree 100% with all the above. Also wanted to add that Far Tire has
changed over the years and used to be a much better beer to me. I lived in
Ft. Collins when the brewery first started up and I've followed this beer
from the beginning. I don't know about the actual recipe ingredients
changing but I know that the bottle label used to talk about dry-hopping and
bottle conditioning and Fat Tire used to have yeast in the bottom of the
bottle. Not anymore.
------------------------------
Date: Thu, 22 May 2003 15:28:32 -0400
From: "Andy Mikesell" <andy_mikesell@yahoo.com>
Subject: Talk about timing....(barrel aging discussion)
This month's Brew magazine had a few articles on barrel aging, which I found
very interesting. All the recent posts about barrel aging piqued my
curiosity and I thought I might try to barrel age a simple batch. However,
when I found the price for a 5 gallon barrel was $100+ (US) I was rather
discouraged.
Then, last weekend for completely different reasons, my father-in-law gives
me a 4 gallon antique wood barrel that was gathering dust in his basement.
I filled the barrel, let it swell, and after 24 hours it's holding water
with no leakage. My father-in-law's recollection on the barrel's origin is
fuzzy, but he believes the barrel is about 80 years old.
Neither of us know what was originally in the barrel, nor is the sealing
bung still around. The barrel ends have no char, so I assume it was used
for beer or wine, and not bourbon. The original wood tap is complete, in
decent shape and fully operational - serving the beer should pose no issue.
And I figure I can fabricate a bung - so how to sanitize?
I've read wine makers burn a sulfur strip inside the barrel then seal, but
how effective is that approach and are there better alternatives?
The inside appears to have the remains of a black resin which I assume is
brewers pitch. I have never seen brewers pitch and have only read about it.
Does this sound right?
Is another application of brewers pitch something I should be considering?
If so, anyone know of a source?
Since I want to understand what flavors the barrel is going to impart, I was
considering a Kolsh, rather than a P-Lambic or other exotic. What would you
age?
Ideas and input are appreciated!
- ------------------------------------------------------------------------
Andrew Mikesell
Westwood, MA [644.2, 86.2] Apparent Rennerian
------------------------------
Date: Thu, 22 May 2003 12:56:07 -0700
From: Jim Wilson <jgwilson@adelphia.net>
Subject: RE: Good beer in DC
Brickskeller
1523 22nd St NW
202-293-1885
Self proclaimed to have the "The World's largest selection of beer"
No affiliation yadda, yadda
Jim Wilson
o \o
__o /\ /
`\ <> `\ `> `\ >
(*)/ (*) (*)/ (*) (*)/ (*)
I ride my bicycle to ride my bicycle.
------------------------------
Date: Thu, 22 May 2003 15:45:24 -0700
From: "Chad Stevens" <zuvaruvi@cox.net>
Subject: Fw: predicting flavor
Steve Alexander has had some interesting musings with regard to flavor and
what turns us on. He lamented: "...unfortunately little is written."
Well lament no more. Leon Rappoport, after better than ten years of
fiddling around, finally finished: "How We Eat: Appetite, Culture, and the
Psychology of Food." I found it at Walmart and it was $14.05 including
shipping.
http://www.walmart.com/catalog/product.gsp?
cat=18763&dept=3920&product_id=2131484&path=0
%3A3920%3A18763%3A20849
The book very nicely summarizes the issues -S et al. have been pondering of
late and provides a framework from which the subject may be approached as
objectively as possible.
Disclaimer: Yes, this is a shameless plug. While I won't see a penny, Rappo
is my best friend in the whole world, is one heck of a nice guy, and I'd
like to see him make millions. Unfortunately, this isn't one of those books
you'll see on anyone's national best seller list so I doubt he'll recoup the
cost of typewriter ribbon (yes, he still uses a typewriter). Anyway, good
book, good read, hits the mark with regard to current thread.
Cheers,
Chad Stevens
QUAFF
San Diego
------------------------------
End of HOMEBREW Digest #4253, 05/23/03
*************************************
-------
