Copy Link
Add to Bookmark
Report
HOMEBREW Digest #4051
HOMEBREW Digest #4051 Thu 26 September 2002
FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Digest Janitor: janitor@hbd.org
***************************************************************
THIS YEAR'S HOME BREW DIGEST BROUGHT TO YOU BY:
Northern Brewer, Ltd. Home Brew Supplies
http://www.northernbrewer.com 1-800-681-2739
Support those who support you! Visit our sponsor's site!
********** Also visit http://hbd.org/hbdsponsors.html *********
Contents:
Decoction (AJ)
Chillin da wort ("Nathan Hoskins")
Spooky Brew 2002 ("Zemo")
Re: Best mash temps for Durst Pilsner malt? (Jeff Renner)
RE: loss of head retention (Brian Lundeen)
Picnic Faucets (Wendy & Reuben Filsell)
Mashing Temp on Imperial Stout ("McGrath, Patricio")
Traquair House Ale Clone Recipe (Richard Foote)
GFI - electrical safety (Kent Fletcher)
*
* Show your HBD pride! Wear an HBD Badge!
* http://hbd.org/cgi-bin/shopping
*
* Beer is our obsession and we're late for therapy!
*
Send articles for __publication_only__ to post@hbd.org
If your e-mail account is being deleted, please unsubscribe first!!
To SUBSCRIBE or UNSUBSCRIBE send an e-mail message with the word
"subscribe" or "unsubscribe" to request@hbd.org FROM THE E-MAIL
ACCOUNT YOU WISH TO HAVE SUBSCRIBED OR UNSUBSCRIBED!!!**
IF YOU HAVE SPAM-PROOFED your e-mail address, you cannot subscribe to
the digest as we cannot reach you. We will not correct your address
for the automation - that's your job.
HAVING TROUBLE posting, subscribing or unsusubscribing? See the HBD FAQ at
http://hbd.org.
The HBD is a copyrighted document. The compilation is copyright
HBD.ORG. Individual postings are copyright by their authors. ASK
before reproducing and you'll rarely have trouble. Digest content
cannot be reproduced by any means for sale or profit.
More information is available by sending the word "info" to
req@hbd.org or read the HBD FAQ at http://hbd.org.
JANITOR on duty: Pat Babcock and Karl Lutzen (janitor@hbd.org)
----------------------------------------------------------------------
Date: Wed, 25 Sep 2002 06:01:36 +0000
From: AJ <ajdel@mindspring.com>
Subject: Decoction
Con - coct: to bring together and cook.
De - coct: to take away and cook.
Cheers, A.J.
------------------------------
Date: Wed, 25 Sep 2002 04:11:44 -0400
From: "Nathan Hoskins" <NathanHoskins@HotPop.com>
Subject: Chillin da wort
I have just gotten a wort chiller and was wondering how does one keep
infection OUT of the wort during the cooling phase since the lid is off the
boiler? Even if I set it on top it isn't going to "seal" out everything.
Thanks for your reply,
Nathan
NathanHoskins@HotPop.com
Brewing in Kentucky
"there's brew in them hills!"
------------------------------
Date: Wed, 25 Sep 2002 06:30:27 -0500
From: "Zemo" <zemo@buyvictory.com>
Subject: Spooky Brew 2002
The Chicago Beer Society's umpteenth annual Spooky Brew
homebrew competition will be held on Saturday, October 26
at the Piece Brewery in Chicago. This singular event (AHA/BJCP
sanctioned) is always a lot of fun, as it offers homebrewers a
chance to show their creativity in two additional "Spooky" categories.
If you are interested in submitting entries for the competition,
the competition announcement/entry form (pdf form) can be
obtained at the Chicago Beer society's website:
http://www.chibeer.org/spooky02.html
Judges and stewards are also encouraged to participate on
the day of the event at Piece, one of the country's coolest
brewpubs.
For additional information,
please contact Steve Hamburg (stevie@chibeer.org)
or co-organizer Tony Babinec (tony@chibeer.org).
------------------------------
Date: Wed, 25 Sep 2002 08:51:34 -0400
From: Jeff Renner <JeffRenner@comcast.net>
Subject: Re: Best mash temps for Durst Pilsner malt?
Nutty Gambler <nuttygambler@yahoo.com> (how about a name, and
location, too? We're friendly here) writes:
>I am at a loss as to what would be the best mashing
>temps for Oktoberfest and Pilsner styles of beer.
>The more I read the more confused I get.
>
>Do I need a rest at 122F or should I use 135F. I am
>thinking of switching to this.
>135 - 150 - 158 each for 30 minutes is this a good
>schedule for Durst Pilsner malt?
>
>Other things I've read read 122-140-158 each for 30.
>Thanks for all input.
I think temperatures below ~145 are unnecessary. For a well
attenuated pils (80% AA), I like about 30-45 minutes each at 145/160
followed by a mashout of 170.
For an Octoberfest, you might want to go 150/158 if you want a little
less attenuation, but I like a well attenuated (75%), but malty,
'Fest or Vienna. The maltiness comes from Vienna malt. It would
appear that you are going to use pils malt as a base, presumably with
Caravienne or another crystal/caramel malt, which works, but isn't my
first choice.
Jeff
- --
Jeff Renner in Ann Arbor, Michigan USA, JeffRenner@comcast.net
"One never knows, do one?" Fats Waller, American Musician, 1904-1943
------------------------------
Date: Wed, 25 Sep 2002 09:58:14 -0500
From: Brian Lundeen <BLundeen@rrc.mb.ca>
Subject: RE: loss of head retention
Kevin Crouch writes:
> Other sources of lipids is yeast metabolism and the
> wheat used for a hef, most of which winds up in the
> trub. Assuming you are racking promptly to a
> secondary, which is a good idea anyway with a hef
> because excess lipids in the trub can also inhibit
> ester production, then lipids from yeast fermentation
> and/or autolysis might just be the case. I do notice
> that some, but not all, beers I have stored for some
> time tend to be losers in the head retention
> department where at one point they did quite nicely,
> and I've always wondered why.
Just to add my own data point: I just finished off a keg of Pilsner (yes,
the last glass was the best tasting one, thanks for asking). I had also been
noticing the drop in head retention over the last little while. Where once I
had this wonderful stiff meringue (almost), there was lately little more
than a light skim of scattered froth. Given the lagering and brightness of
the beer when kegged, I would have trouble thinking that any serious
autolysis and lipid production was going on in this beer. I too would like
an explanation for this effect.
Cheers
Brian Lundeen
Brewing at [314,829] aka Winnipeg
------------------------------
Date: Tue, 24 Sep 2002 23:32:11 +0800
From: Wendy & Reuben Filsell <filsell@myplace.net.au>
Subject: Picnic Faucets
I just picked up a picnic faucet and fitted it with 2m (6ft) of 5mm (3/16)
ID hose as per my pluto gun but it foams like mad. Does anyone use one? How
much hose is recquired ?
Reuben
W.A.
------------------------------
Date: Wed, 25 Sep 2002 13:21:23 -0500
From: "McGrath, Patricio" <Patricio_McGrath@NCS.com>
Subject: Mashing Temp on Imperial Stout
Hello, I'm new in HBD, and have a question for the experts.
I made an all grain Russian Imperial Stout which turned out with a high F.G.
The temperature of fermentation was OK (1 week working, and left during 10
days waiting), the yeast was oxygenated adequately.
I was wondering if step mashing with this kind of style is not recommended.
The beer tastes good but with a final sweet flavor
Can anyone turn some light on the subject.
Recipe used for 40 liters:
Pilsen malt 15.577 kg
Caramel 1,558 kg
Chocolate malt 0,779 kg
Black Patent malt 0,779 kg
Flaked Barley 0,779 kg
Yeast: Irish Ale 1084
O.G. 1087
F.G. 1042
Step mashing at 50C, 60C and 71C, during 90 minutes. Sparge at 80 C
Some people back in my country think that the pilsen malt might be of poor
quality. Could this be the source of the problem as well?
Tks.
Patrick (From Argentina)
****************************************************************************
This email may contain confidential material.
If you were not an intended recipient,
Please notify the sender and delete all copies.
We may monitor email to and from our network.
****************************************************************************
------------------------------
Date: Wed, 25 Sep 2002 15:28:42 -0400
From: Richard Foote <rfoote@mindspring.com>
Subject: Traquair House Ale Clone Recipe
Brewerz,
I am seeking any helpful input into developing a Traquair House Ale clone.
So far...
My plans are to do a parallel mini boil of the first runnings and combine
this with the main boil with about 1/2 hr left in a 90 minute total boil.
Jackson and Daniels indicate pale ale malt and roasted barley in the grist.
These same sources, and the Traquair web site, verify use of EKG as the
sole hop. As to yeast, please see the following excerpt from their web site:
"The wort is now cooled and pitched with bottom fermenting yeast
under controlled temperature. It is then fermented in oak over a
period of seven days. The beer is then transferred into cold
storage tanks or barrels and matured over a period of weeks."
Bottom fermenting yeast? Assuming a good Edinburgh ale yeast would be the
way to go, I've already started some YCKC Scotch Ale yeast. Can anyone
shed any light on this? Any comments on a good TH clone are welcome.
TIA,
Rick Foote
Brewing and Puzzling in Murrayville, GA
------------------------------
Date: Wed, 25 Sep 2002 16:58:37 -0700 (PDT)
From: Kent Fletcher <fletcherhomebrew@yahoo.com>
Subject: GFI - electrical safety
Just wanted to share an experience and remind
homebrewers out there about Ground Fault Interuptor
(GFI) protection devices. I know this subject has
come up before, but it bears repeating.
In case somebody is not familiar with the terminology,
a GFI monitors the ground circuit and interupts the
flow of elctricity in the event that there is a ground
fault - that is current going directly to ground. The
sole purpose of a GFI is to prevent shock or
electrocution. The devices are quite sensitive and
very fast operating, and will stop the flow of
electricity BEFORE you feel the shock. In newer or
remodeled homes, you'll find GFI outlets in the
kitchen and bath as well as outdoor receptacles. You
can also get GFI circuit breakers, which may make it
easier to protect several outlets.
The other day I had a ground fault with a submersible
pump. The pump was NOT plugged into a GFI. The pump
was running normally, by all appearances. When I came
into contact with the flow of water from the hose I
got a healthy 120 volt, 60 hertz jolt, as I completed
the path to ground. I can repair the old pump
(compression fitting on power cord leaked), but I
bought a new one and postponed my brew for a day to
install a GFI at my brew stand.
Please remember, this doesn't just apply to RIMS and
HERMS setups. If you use line voltage for ANY purpose
(fans, reading lamps, boomm boxes, computers, et al)
while you are brewing, you NEED a GFI.
Kent Fletcher
Brewing in So Cal
------------------------------
End of HOMEBREW Digest #4051, 09/26/02
*************************************
-------
