Copy Link
Add to Bookmark
Report
HOMEBREW Digest #1878
This file received at Hops.Stanford.EDU 1995/11/08 PST
HOMEBREW Digest #1878 Wed 08 November 1995
FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Rob Gardner, Digest Janitor
Contents:
propane and carbon monoxide (Rob Lauriston)
Ooops! I'm sorry. (Harlan Bauer)
Convert an IPA to Christmas ale (Anthony Migliore)
Re; Burnt Crud ("David W. Parkin")
Mashing Overnight... ("Bessette, Bob")
temperature calculations ("Dulisse, Brian")
Wyeast ("Tracy Aquilla")
Bad Pumps/How to Oxygenate a 6 bbl Run (Kirk R Fleming)
Corn starch in the mash (Delano Dugarm 36478)
Calling Mr. (Vanilla) Bean (TrubRacker)
Corn Starch (Peter Thomford)
RE: Gravity of Bottled Beer (Neal Christensen)
Samuel Adams/mega-microbrewer ("Michael R. Swan")
San Diego (Todd Kirby)
Mash Agitation ("Richard Scotty")
Re: Wyeast and perceived problems (Jeff Frane)
adelscott beer (HOMEBRE973)
Thanks to ALL HBD'ers (kdschida)
Additional CDO HC Winners (Fred Hardy)
Hung over (Stephbrown)
Lead in Glass Carboys (Douglas A. McCullough)
1996 Bay Area Brewoff (Bob Jones)
Home Roasted Malt (Wyss1364)
Homebrew Digest #1877 (November 07, 1995) -Reply (Alan Deaton)
Avoiding stuck sparge suggestions? (Mike Dowd)
Sparge pH/the big three (Algis R Korzonas)
pumps and wort (LARSEN_JIM)
Re: "Fine Beer" (Al Stevens)
re: Trappists (Algis R Korzonas)
Iodophor Summary (Tim Fields)
Grain Mills ("Tracy Aquilla")
re: Wheat beer question (Eric W. Miller)
re: Irish Moss (Eric W. Miller)
wheat beer and tannins ("Bob Hall" )
Re: Bathing (Pierre Jelenc)
Uncl: Airlock Fluid and Suck Back ("Calvin Perilloux")
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!! November 5 thru November 11: The digest
!!! will be unmanned! Please be patient if
!!! you make any requests during this time
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
******************************************************************
* POLICY NOTE: Due to the incredible volume of bouncing mail,
* I am going to have to start removing addresses from the list
* that cause ongoing problems. In particular, if your mailbox
* is full or your account over quota, and this results in bounced
* mail, your address will be removed from the list after a few days.
*
* If you use a 'vacation' program, please be sure that it only
* sends a automated reply to homebrew-request *once*. If I get
* more than one, then I'll delete your address from the list.
******************************************************************
#################################################################
#
# YET ANOTHER NEW FEDERAL REGULATION: if you are UNSUBSCRIBING from the
# digest, please make sure you send your request to the same service
# provider that you sent your subscription request!!! I am now receiving
# many unsubscribe requests that do not match any address on my mailing
# list, and effective immediately I will be silently deleting such
# requests.
#
#################################################################
NOTE NEW HOMEBREW ADDRESS hpfcmgw!
Send articles for __publication_only__ to homebrew@hpfcmgw.fc.hp.com
(Articles are published in the order they are received.)
Send UNSUBSCRIBE and all other requests, ie, address change, etc.,
to homebrew-request@hpfcmgw.fc.hp.com, BUT PLEASE NOTE that if
you subscribed via the BITNET listserver (BEER-L@UA1VM.UA.EDU),
then you MUST unsubscribe the same way!
If your account is being deleted, please be courteous and unsubscribe first.
Please don't send me requests for back issues - you will be silently ignored.
For "Cat's Meow" information, send mail to lutzen@alpha.rollanet.org
ARCHIVES:
An archive of previous issues of this digest, as well as other beer
related information can be accessed via anonymous ftp at
ftp.stanford.edu. Use ftp to log in as anonymous and give your full
e-mail address as the password, look under the directory
/pub/clubs/homebrew/beer directory. AFS users can find it under
/afs/ir.stanford.edu/ftp/pub/clubs/homebrew/beer. If you do not have
ftp capability you may access the files via e-mail using the ftpmail
service at gatekeeper.dec.com. For information about this service,
send an e-mail message to ftpmail@gatekeeper.dec.com with the word
"help" (without the quotes) in the body of the message.
----------------------------------------------------------------------
Date: Mon, 6 Nov 95 04:00 PST
From: robtrish@mindlink.bc.ca (Rob Lauriston)
Subject: propane and carbon monoxide
While I voted 'yes' to proposition propane earlier, I am having second
thoughts and I'd like to echo Frank Dobner.
>Honestly, the subject of propane use indoors is one that I am glad
>remember to treat propane with a lot of respect. I also use propane
>indoors and I think I do all the right things. If you get sick of these
>propane posts, think of them as a "wake-up call."
>"It takes a very careful brewer to be extremely dangerous."
I don't think I paid nearly enough attention to the danger of carbon
monoxide poisoning. Perhaps that's because the guy who turned me on to
propane said he had never had any problems. But at the time he said that,
we were brewing in his basement with the window only open a crack and I was
getting dizzy and nauseous. You never know with the "I've never had any
problems" posts.
------------------------------
Date: Mon, 6 Nov 1995 06:42:33 -0600
From: blacksab@siu.edu (Harlan Bauer)
Subject: Ooops! I'm sorry.
Ooops! Well, guess I was wrong, methane is NOT also heavier than air. I'm
terribly sorry for posting false information, and thanks to all who
corrected me. For some reason, I thought there were more carbon molecules in
Methane than there are.
Feeling kind of stupid,
Harlan
*****************************************************************************
* *
* Harlan Bauer ...malt does more than Milton can *
* <blacksab@siu.edu> To justify God's ways to man. *
* Carbondale, IL --A.E. Houseman *
* *
****************************************************************************
*
------------------------------
Date: Mon, 06 Nov 1995 08:37:24 -0500
From: Anthony Migliore <MIGLIORE@novell.nadn.navy.miL>
Subject: Convert an IPA to Christmas ale
I have a five gallon corny keg of an IPA which is just starting to get good.
Before I drink it all, is it possible to convert this patch to a Christmas Ale?
Can I just dump in (ala dry hop) some clove, nutmeg, cinnamon, etc? If I
can do this, how much and what kind of spice should I try?
Anthony
------------------------------
Date: Mon, 6 Nov 1995 08:17:52 -0600
From: "David W. Parkin" <dwparkin@mmm.com>
Subject: Re; Burnt Crud
>After fifty or so batches (extract based) I had a strange experience on
>my last batch. A nice black ring of burnt crud (sugars) on the bottom of
>my 15 gal keg boiler.
>Question: How do I get rid of this stuff?
I have had the same question/experiance on my brew pot using the stove. I
use to go after the burnt crud with chemical and mechanical weapons but
found that to be a lot of work. Then one time I left a brew pot out over
night (forgot to clean - too late and too much homebrew while cooking) and
in the morning, the burnt crud had pealed away and could be flicked off the
pot. Now if I have any scourching, I clean the pot (rinse) and leave it
for the next day to clean. I must note that all of the crud doesn't come
off but most will.
DWP
------------------------------
Date: Mon, 06 Nov 95 06:31:00 PST
From: "Bessette, Bob" <bob.bessette@lamrc.com>
Subject: Mashing Overnight...
Fellow HBDers,
I've been reading a lot lately about mashing overnight and then sparging,
etc in the AM. This would make some sense for me in that I could, after the
kids go to bed, set up and start the mash, and then go to bed myself. I
would then get up early and complete the mashout, sparging, boiling,
chilling, pitching, etc. As a result it would only take me approximately 3
hours in the AM rather than 5 hours all at once. Obviously after a few hours
my mash temperatures will no doubt be below 150F. What adverse effects could
this have on my brew? The more I read about it the more attractive the idea
sounds. I may try this this weekend. I would welcome your comments,
warnings, etc. TIA...
Bob Bessette
bob.bessette@lamrc.com
------------------------------
Date: Mon, 06 Nov 95 10:14:00 EST
From: "Dulisse, Brian" <bbd4@CIPCOD1.EM.CDC.GOV>
Subject: temperature calculations
is there a formula for calculating the volume/temperature of infusions? for
example, if i have x pounds of malt at temperature w, and add y gallons of
water at temperature z, what is the temperature at which the mixture will
stabilize? or, if i have x pounds of malt and y gallons of water mixed
together at temperature z, how much boiling water is necessary to move the
mass to a temperature z+a? i'd guess this is simply a problem of knowing
the specific heat of malt . . . ?
tia
bd
------------------------------
Date: Mon, 6 Nov 95 10:27:09 CST
From: "Tracy Aquilla" <aquilla@salus.med.uvm.edu>
Subject: Wyeast
In digest # 1796:
Date: Fri, 3 Nov 1995 20:00:52 -0600
From: blacksab@siu.edu (Harlan Bauer)
Subject: WYEAST
Harlan says:
>There's been a bit of talk lately about Wyeast, and I suppose readers should
>be reminded that Wyeast was caught selling Brettanomyces yeast (that's how
>the package was labeled) when in fact the package contained mostly Ale
>yeast. The homebrewer who pointed this out and posted on Lambic Digest was
>threatened with law suit and forced to publically recant. Wyeast has since
>changed the package, basically admitting that said homebrewer was correct.
>So don't expect Wyeast to be forthcoming about any real or percieved
>problems with their products.
[snip]
There's always more than one side to every story. Without getting into a
raging debate over this issue, I'd like to make some suggestions for those
having "perceived problems" with their yeast. First of all, considering the
issue of liability/defamation, I doubt if it's wise (or responsible) to post
unsubstantiated claims like this to r.c.b or the digest (or to spread rumors
by repeating hearsay). Publicly questioning the quality of their products
and/or their sense of business ethics probably won't solve your problem, but
it is likely to land you in court! Secondly, if you question the quality of
your yeast package, you should probably try to return it to the supplier
from whom you purchased it. They should replace it and take up the issue of
quality control with the manufacturer, thereby making you a happy customer.
If you found a rat carcass in your Cheerios, would you return the offending
box of parts to the grocery store for a replacement, or call General Mills?
Why should yeast be any different than any of the thousands of other
products we consume every day?
Tracy in Vermont
aquilla@salus.med.uvm.edu
------------------------------
Date: Mon, 6 Nov 1995 07:34:08 -0700
From: flemingk@usa.net (Kirk R Fleming)
Subject: Bad Pumps/How to Oxygenate a 6 bbl Run
Wort Pumps: In #1876 James Hojel <JTroy@msn.com> said he talked to a
Belgian brewmaster who claimed
> using gravity is much more gentle on wort/beer and will produce better
> tasting and more stable beer (less damage on compounds, etc.??) than a
> centrifugal pump. I mentioned that I use a pump for wort recirculation
> and to pump between kegs (Pico System). He warned me against it;
> especially at the home-brew level.
I know the pumps we use (March, Teel, etc) are primitive paddle-wheel
type centrifugal pumps, but all the brewhouse pumps I've seen are just
centrifugal units too, although I assume they have the more sophisticated
laminar flow fins in them. Cavitation in the paddle wheel pumps is
common (at least in mine).
Before I jump thru a bunghole to redesign my system I wonder if anyone
has any experience to corroborate the claim, or can speculate as to what
effect beating the crap out of the wort thru a pump has on the final
product. For a continuously recirculating system this could be a big
deal, and if it really is a big deal, do you think a peristaltic (sp?)
pump would be a candidate solution.
Oxygenating Large Volumes of Wort: I would greatly appreciate any tips
you may have for oxygenation of 6 bbls of wort in a Grundy (wort has a
1:1 aspect ratio). Info on airstone products, oxygen pressure and
duration of the process is needed. I plan to fit three or four of the
sintered ss airstones to a manifold and increase oxygen pressure until
I can see the airstones producing bubbles over a maximum of their
surface areas. Since I can't see this in the actual system, I'd do it in
shallow wort then compensate for the depth-of-tank head. Any ideas?
KRF Colorado Springs
- ------------------------------------------------------------------
"Frig is not an appliance, it is an activity." Rolland Everitt
- ------------------------------------------------------------------
------------------------------
Date: Mon, 06 Nov 1995 15:10:47 +0000 (GMT)
From: Delano Dugarm 36478 <ADUGARM@worldbank.org>
Subject: Corn starch in the mash
David Seldon asks about using corn starch in an all-grain
pale ale.
I've mashed both corn starch and tapioca starch with no
significant problems. In both cases the starch was about 20% of
the mash. The best way I've found to avoid large starch globules
is to mix the starch well with the crushed malt *before* doughing
in. I always add liquid to solid, and this might be more
important with starch than with regular malt. 6-row malt
converts the starch very quickly, but 2-row does fine as well.
The only difficulty I've found in using starch is that
the starch will tend to scorch if I use direct heat to boost the
mash from protein rest to saccharification rest.
This being said, I do not think that starch is a very
good adjunct to use in a pale ale. It leaves a very neutral
taste, and I much prefer the grainy sweetness that flaked maize
gives to pale ales. Starch does make a nice, dry cream ale,
though.
The best discussions of adjuncts are an article by George
Fix in the 1985 _zymurgy_ All-Grain Issue and Wahl and Henius
_American Handy Book of the Brewing, Malting and Auxiliary
Trades_, Chicago, 1908. I've been experimenting with all sorts
of adjuncts, and will eventually post some results.
Delano "Adjunct Boy" DuGarm
Arlington, VA
adugarm@worldbank.org
------------------------------
Date: Mon, 6 Nov 1995 11:07:47 -0500
From: TrubRacker@aol.com
Subject: Calling Mr. (Vanilla) Bean
Greetings to the Collective from a longtime lurker and first time poster !
Ques: Have any of you had experience w/vanilla bean? Specifically, yesterday
I brewed a Russian Imperial Oatmeal Stout and would like to add Vanilla to
the already lengthy nom de plume. ( OG 1090) I did not add the vanilla to
the boil fearful that the aromatics would be driven off. My options now, as
I see them, are to "dry bean" or to add some vanilla " tea" to either the
primary or secondary. ( Secondary seems a better bet). Also, would the bean
need to be ground or minced or added whole? How much is too much? Etc., etc.,
etc. .....
Any suggestions, hopefully based on experience, would be greatly
appreciated.
Andy Udalovas
TrubRacker@aol.com
"Anything worth doing is worth overdoing"
Since hemmoroids occur on your ass,
Why aren't they called Assteroids?
------------------------------
Date: Mon, 6 Nov 95 12:09 EST
From: Peter Thomford <PThomfor_+a_HAZTRXMA_+lPeter_Thomford+r%Hazleton_Wisconsin@mcimail.com>
Subject: Corn Starch
Text item: Text_1
In #1876 David Selden writes:
<I have a recipe - from Papazian's book that calls for a ton of corn starch,
<12 -16 oz? Is this a typo or do I need to dump this liquid thickening
<stuff in my allgrain batch. What is its effect on the brew? Should
<I be using this pale ale recipe for my first allgrain batch?
I assume that you are referring to the Amaizing Pale Ale recipe. I have used
this several times with up to 2 lb. of corn starch. This has worked for me
quite well. OG and FG has been about as expected, (i.e. not gravy) -Peter
------------------------------
Date: Mon, 6 Nov 1995 10:49:22 -0700
From: nealc@selway.umt.edu (Neal Christensen)
Subject: RE: Gravity of Bottled Beer
Derrick Pohl asked about measuring gravity of carbonated beer. A brewer
friend told me that carbonation does affect the reading. I took his word on
it, but have not experimented. When he tests his carbonated beer, he lets
it perculate through a paper lab filter first to remove the CO2. It needs
to be a slow perc to do the job. Three coffee filters together will work
about like a lab paper filter - maybe run through twice.
Neal Christensen
Missoula - A Place Sort Of
------------------------------
Date: Mon, 6 Nov 95 13:43:20 GMT (Original EST)
From: "Michael R. Swan" <mswan@fdic.gov>
Subject: Samuel Adams/mega-microbrewer
* In HBD #1876, Ken Schroeder (kens@lan.nsc.com) writes about
megabreweries:
>Bill tells the story of how Jim Kock and Sam Adams son medals art GABF. Good
>story I might add. To me SA is a big brewer, maybe the biggest of the craft
>brew companies. Siera Nevada is also big. Both these companies produce good
"Maybe the biggest" is a bit of an understatement when applied to
Samuel Adams. I just got my Prospectus for The Boston Beer Company initial
public stock offering. In the Prospectus, the Company states, "Boston Beer
is the largest craft brewer by volume in the United States. . . In 1994, the
Company sold 714,000 barrels of beer, which it believes to be more than the
next six largest craft brewers combined."
^^^^^^^^
Mike Swan
Dallas, Texas
Standard disclaimers apply
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
"I broke their code, but I fell into the trap they intended, the trap of a
code devised to be broken. I took no pride in my rebellion, I took it as
guilt, I did not damn them, I damned myself, I did not damn their code, I
damned existence - and I hid my happiness as a shameful secret."
Ayn Rand
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
Date: Mon, 6 Nov 1995 14:06:30 -0500 (EST)
From: Todd Kirby <mkirby@isnet.is.wfu.edu>
Subject: San Diego
Hello Collective,
I'm going to a Neuroscience conference in San Diego next week and was
wondering if there are some brewpubs, etc. that I just HAVE to visit.
Anyone have any recommendations?
Thanks,
Todd Kirby
------------------------------
Date: 6 Nov 1995 14:29:34 -0700
From: "Richard Scotty" <richard_scotty@msmgate.mrg.uswest.com>
Subject: Mash Agitation
I've recently aquired a new mash tun made from a converted keg. This past
weekend, I ran it through its paces with an ESB and while there was no
scorching of the mash as a result of adding heat, the mash required virtually
constant stirring to maintain uniform temperature and avoid scorching.
So now, I've embarked on a small engineering exercise to add mechanical
stirring to this system. I have access to a variety of gear motors with
various rpm and torque ratings, but I'm having difficulty finding an
appropriate device for this motor to turn. I've seen several paint stirrers,
but they are of the painted steel variety and unsuitable for use in the mash.
I've also found a mixer designed for use with wallboard coumpound. This
unit is zinc plated (not galvanized - it has a soft goldish color to it).
Does anyone know what the result of using this device might be?
Short of custom fabrication, has anyone else approached and hopefully solved
this problem? I have read the various RIMS threads, but I believe that
stirring will still be necessary with re-circulation.
Any help will be greatly appreciated. Private email is fine - I'll summarize
and post if there is sufficient interest.
Richard Scotty - Chief Mash Mucker - The Crapshoot Brewery
------------------------------
Date: Mon, 06 Nov 1995 15:05:53 -0800
From: jfrane@teleport.com (Jeff Frane)
Subject: Re: Wyeast and perceived problems
>From: blacksab@siu.edu (Harlan Bauer)
>Subject: WYEAST
>
>There's been a bit of talk lately about Wyeast, and I suppose readers should
>be reminded that Wyeast was caught selling Brettanomyces yeast (that's how
>the package was labeled) when in fact the package contained mostly Ale
>yeast. The homebrewer who pointed this out and posted on Lambic Digest was
>threatened with law suit and forced to publically recant. Wyeast has since
>changed the package, basically admitting that said homebrewer was correct.
>So don't expect Wyeast to be forthcoming about any real or percieved
>problems with their products. I'm not saying there ARE any problems with
>1056, I'm simply suggesting that if there are any problems with it, you're
>probably not going to hear about it from Wyeast.
>
The situation concerning Wyeast and "the homebrewer" (let's call him "X")
was considerably more complicated than you probably know, or than X was
willing to mention on the net. Let us just say that before you shoot off
your virtual mouth, try speaking directly with Dave Logsdon on the issue.
The informational literature available from Wyeast to all retailers has
always, as I recall, been pretty clear that the Brett. package was a blend
of several yeast strains, a blend that had been put together by Wyeast, not
to defraud anyone (and why would they?), but to ensure better performance
than initial single strains.
If you believe the last sentence, it's clear that you've never had any
direct dealings with Wyeast, and that you're not associated with any
retailer. In the past, whenever there have been any problems with their
yeasts, Wyeast has not only replaced them for customers, but recalled them
from retailers.
In the past, Wyeast was notified by homebrewers that there were some
problems with slow performances by 1056, they traced the problem down to
a mutation, and the problem was corrected.
If anyone is having a problem with any Wyeast strain, they should contact
their retailer, or even call Wyeast directly. Contrary to some
people's opinions, Wyeast didn't get to be the leader in the field by
being huge, they got there by hard work, quality merchandise, and by
responding to customer requests.
And, please, before you malign *any* producer, wholesaler, retailer, whatever
in the homebrewing field, get your facts straight first, folks.
- --Jeff Frane
------------------------------
Date: Mon, 6 Nov 1995 17:27:16 -0500
From: HOMEBRE973@aol.com
Subject: adelscott beer
I recently tasted a beer called Adel Scott Malt Liquor. It was quite
alcohol, slightly smoked, and quite nice as a sipping beer. It was brewed by
Fischer D'Alsace.
Anyone know anything more about this beer.
Andy Kligerman
Hillsborough, NC
------------------------------
Date: Mon, 6 Nov 95 13:31:02 PST
From: kdschida@vines.dsd.litton.com
Subject: Thanks to ALL HBD'ers
Some of you might have known about, and participated in the Virtual
Village Homebrew Society's "NetWort I" competition this past Saturday,
Nov. 4th, on CompuServe. Well, I've been a homebrewer now for about
a year and a half with only 11 batches under my belt (literally, just
ask my wife); the last one just bottled two weeks ago which was my
first all-grainer, and when Ralph Colaizzi mentioned this competition
in HBD #1849, I thought... what the heck? To make a long story short,
I sent in my first try at a stout, and WON 1ST PLACE in the combined
category "Porters and Stouts". I knew it tasted good to me, but I was
AMAZED at my placing, not expecting to even get a ribbon at all, much
less 1ST PLACE!!
I basically just wanted to say thanks to EVERYBODY here on the HBD for
all the knowledge I gain being a 95 percent lurker, 5 percent
participant. Special thanks to Dr. Dave Harsh for his personal help
on this particular brew that I sent in to the competition (Can Ya'
believe it Dave, that "Colorado Crankcase Stout" WON!). I've been
getting HBD for the majority of time I've been brewing, and it's paid
off. Maybe I'll get off my duff & join in discussions more often, and
perhaps I'll learn even more.
Kurt Dschida
76132.733@compuserve.com or kdschida@vines.dsd.litton.com
I'd rather have a bottle in front of me, than a frontal lobotomy!
------------------------------
Date: Mon, 6 Nov 1995 21:00:06 -0500 (EST)
From: Fred Hardy <fcmbh@access.digex.net>
Subject: Additional CDO HC Winners
Ooops!
ADDITIONAL CAPITOL DISTRICT OPEN AWARDS
Because of the large number of entries in the American Ale Category (30)
and the even distribution among the three subcategories - 10 each in
American Pale Ale, American-style IPA and American Brown, the organizing
committee decided to award 3 second place ribbons in this category.
First place overall went to an American Brown. Omitted from the original
announcement was the top American Pale Ale (George Fix) and the top
American-style IPA (Delano DuGarm). Both will receive a second place ribbon.
The organizing committee is also considering making each a separate
category for the 1996 CDO HC.
My apologies and congratulations to George and Delano.
Fred
==============================================================================
We must invent the future, else it will | <Fred Hardy>
happen to us and we will not like it. |
[Stafford Beer, "Platform for Change"] | email: fcmbh@access.digex.net
------------------------------
Date: Mon, 6 Nov 1995 21:47:01 -0500
From: Stephbrown@aol.com
Subject: Hung over
I have noticed the tendency to sometimes get violently ill on half the beer
that I can other times drink without any problems. I have also noted two
factors that seem to be tied to it.
Factor #1: If I am under-hydrated before I start drinking, I get sick. I try
to always drink a lot of water throughout the day BEFORE I start drinking.
It helps to drink water afterwards too, but it is more important to drink it
before.
Factor #2: The kinds and qualities of beer that I am drinking. I am not very
tolorant of Bud (sorry to the big three supporters out there) and the like.
On the other hand, I can drink homebrew until I fall down, and when I wake
up I'm ready to drink some more - after a few glasses of water, of course.
I would also like to hear other people's theories on the reasons for this
strange phenomenon.
Cheers,
Stephen Brown
"Ich kann besseres Bier trinken, wenn ich schon 5 Bier getrunken habe."
------------------------------
Date: Mon, 6 Nov 1995 23:23:39 -0600
From: dmccull@alabama.com (Douglas A. McCullough)
Subject: Lead in Glass Carboys
A fellow at Alabama Scientific Supply recently expressed concern about lead
in the glass carboys some local brewers use. The carboys, manufactured in
Mexico and offered for sale for about $12@ locally at Waccamaw, have a
pronounced blue-green tint. He suggests that the tint indictes a lead
content so high that beer, leaching it out, would contain unacceptable lead
levels. He feels that those carboys were made for filling with pennies, not
foodstuffs. Didn't lead poisoning cause Nero to burn Rome? Any comments?
(On lead, not my knowledge of history. What do you expect from an
engineer?)
Doug McCullough
------------------------------
Date: Mon, 06 Nov 1995 21:41:25 +0800
From: Bob Jones <bjones@bdt.com>
Subject: 1996 Bay Area Brewoff
The Tenth Annual Bay Area Brewoff is scheduled for January 20, 1996 at
Lyon's Brewery Depot in Dublin, Ca. and is hosted by the Draught Board
Homebrew club.
The catagories are as follows :
India Pale Ale
Pale Ale
Bock
Porter
Dry Stout
Barley Wine/Wheat wine
Holiday Beer
Mead
For additional entry information please send me an email.
Thanks,
Bob Jones in Alamo, Calif.
bjones@bdt.com
------------------------------
Date: Tue, 7 Nov 1995 00:54:29 -0500
From: Wyss1364@aol.com
Subject: Home Roasted Malt
I've followed the roasted malt thread and I don't think anyone has mentioned
the very concise instructions by Geoff Cooper for making it which are
available from two sources: An Introduction to Old British Beers and How to
Make Them By Dr. John Harrison or on the web Beer Technical Library at
http://alpha.rollanet.org/library/roastmaltGC.html
I've used this technique 4 times with great results. Twice to make amber malt
and twice to make brown malt. The best results have been from the brown malt.
The porters are(were) smooth and creamy after 3 weeks in the keg, with no
harsh bitterness as mentioned by some posters. Brown malt accounted for 20%
of the grist.
My best guess is that the drying period used in this procedure helps to to
reduce over carmelazation of the malt sugars and any nasty bitterness. Many
of the recipes in Harrison's book call for long aging times which I think
are due to high SG rather than use of roasted malt or high hopping rates.
Don't give up on home roasted malt. It's just one more element of control
over your finished beer that allows you to give it your mark.
------------------------------
Date: Tue, 07 Nov 1995 02:38:57 -0600
From: Alan Deaton <amdeaton@gw.hyatt.com>
Subject: Homebrew Digest #1877 (November 07, 1995) -Reply
I will be out of the office from Monday, 11/6 thru Tuesday 11/7. If
your problem is an urgent one, please contact Mark Herman.
/Alan
------------------------------
Date: Tue, 7 Nov 1995 03:39:45 -0500
From: mdost3+@pitt.edu (Mike Dowd)
Subject: Avoiding stuck sparge suggestions?
This weekend, I brewed a Weizenbock, using the recipe in
Eric Warner's _German Wheat Beer_. The decoction mash
(my first) was no problem, I actually enjoyed it, but the
sparge stuck like crazy and generally made my life hell for far
too long. I was wondering if anyone had any advice for
avoiding this sort of thing in the future, since I would like
to try making more wheat beers someday. Some details: I
use an EasyMasher in my 5 gallon mashtun for lautering, I
crush the grain with a (non-adjustable) Malt Mill, the recipe
had 6 pounds of German wheat, 4 pounds of Munich, and 5
ounces of Special B (since I couldn't find dark Munich).
Any and all suggestions would be greatly appreciated.
Thanks,
Mike
p.s. In honor of the nightmarish aspects of making this beer,
I'm calling it Franz Kafka Weizenbock.
Michael Dowd "I could be mistaken. Maybe it was another
Slippery Slope Research bald-headed jigsaw-puzzle tattooed naked
University of Pittsburgh guy I saw."
mdost3+@pitt.edu -Fox Mulder
------------------------------
Date: Mon, 6 Nov 95 13:25:12 CST
From: korz@pubs.ih.att.com (Algis R Korzonas)
Subject: Sparge pH/the big three
Russ writes (quoting me):
>> DO NOT USE GYPSUM TO TRY TO ACIDIFY SPARGE
>> WATER. ... If you want to use gypsum to keep the
>> pH of the runnings low, you can do that...
>
>Okay. Will adding gypsum to the sparge water help keep tannin extraction
>down? That's my main concern with sparge pH.
Yes, but don't measure sparge water pH -- measure the pH of the runnings.
You're using the same Chicago water I am and even with an all DeWolf-Cosyns
Pale Ale malt mash, the runnings pH never got above 5.7 or so even after
8 gallons of runnings from 7 pounds of DWC Pale Ale malt. If you use the
Pils malt (which has less acidity and therefore the pH ends up higher)
then you may want to add a gram per gallon of gypsum to your sparge water
if the style will allow for the added sulphate dry bitterness. If you're
making a Pilsner, then, well, you may want to use Phosphoric or Lactic
acid or Calcium Chloride if you can find it in food grade for a reasonable
price (i.e. DON'T use road salt! ;^). If you do use acids for your sparge
water adjustment, then you do want to measure the sparge water pH -- I
would adjust it to only about 6.5 pH since the mash will have *some*
buffering and if you get the pH too low you will affect the yeast performance
and break formation.
***
Bill writes:
>Have the big three single handedly spoiled the tastes of American beer
>drinkers? I doubt that. They sell what sells best. Beer tastes are not
>static, they have been changing for hundreds of years.
I think that they have been leading the tastes. Before prohibition there
was a lot more diversity in beer and after, not only did diversity disappear
but also the pale beer got paler, blander and *cheaper* to make. WW II also
was a big step function in terms of beer blandness -- after the war beer was
again quite lamer than before.
and:
>I myself can't seem to get rid of the mindset that the big three just don't
>get it. But they get it: they please a huge crowd - one that has never heard
>of HBD!
No, they get it alright, but their goal is not better beer, just better
profits. They own beer *factories* and if they can save $0.0001 per can of
Bud by reducing the bitterness a little, they'll do it. Look at Eckhardt's
book, The Essentials of Beer Style. Compare the bitterness of Budweiser
in (I believe) 1980 and (I believe) 1987. It dropped something like 5 IBUs.
While you may be right that tastes change, I think that advertising and
marketing affect the masses a lot more than flavour and that the big three
simply dictate what the masses will drink.
Not only do they understand the mass market, they also appreciate the
micro revolution -- consider the purchases of Red Hook and Celis. I think
that good beer is here to stay, but that we're going to keep having to open
new small breweries because the big three are going to keep buying them as
they get big enough to be worth their while.
Finally, you mentioned Bavaria and their big breweries. Yes, but it's *their*
big breweries not ours that have blandified their tastes. Look at the big
six in England while you're at it and Interbrew in Belgium. Taste a bottle
of Verboden Vrucht before and after the Interbrew takeover of DeKluis. I may
sound like I'm saying BIG BREWERIES == AN INCREASE IN BLANDNESS...
... I am.
Al.
Al Korzonas, Palos Hills, IL
korz@pubs.att.com
------------------------------
Date: 6 Nov 95 12:44:00 -0800
From: LARSEN_JIM@Tandem.COM
Subject: pumps and wort
In HBD1867, James Hojel <JTroy@msn.com> passed on some comments by a
Belgian brewmaster regarding damage to wort by centrifugal pumps,
especially at the homebrew (presumably small volume) level. The
brewmaster preferred the use of gravity systems whenever possible.
Does this concern for gentle treatment of the wort extend to whirlpools
(to collect trub and hops in the center of the kettle) and aeration by
agitation?
Jim
------------------------------
Date: 07 Nov 95 05:12:09 EST
From: Al Stevens <72704.743@compuserve.com>
Subject: Re: "Fine Beer"
> how we know many people who easily shell out $20 for a bottle of wine
>but look at us like we have three heads when we talk of buying a $4 or $5
>bottle of beer.
Are these not the same people who will go out at night and spend the same on
cheap commercial swill ????
Al Stevens
------------------------------
Date: Mon, 6 Nov 95 17:47:56 CST
From: korz@pubs.ih.att.com (Algis R Korzonas)
Subject: re: Trappists
Curt--
Perhaps I'm a little picky, but I was trying to correct a misconception.
Some people don't quite understand Belgian beers in general let alone
the Trappists. As recently as maybe five or six years ago, I was very
confused about Belgian beers also. I was under the impression that all
Trappists had lactic components (actually, only Orval has an acidic
note and I believe that this may be from an acid-producing yeast).
My cousin and I had created the term "Belgian Character" to try to give
a name to the aromatic qualities we found common in many Belgian beers.
I now know that this is that spicy/phenolic aroma is the character imparted
by the yeast and is found in many (but not all) Belgian Ales. I understand
what Russ was trying to say, but I could not let it pass because I felt
it important to curb the spread of this misconception.
True, most Trappist Ales tend to be on the stronger side, but so do most
Belgian Ales. Frankly, I would have been less apt to comment if he had
said that Biere de Garde had a "Belgian Character." I think that the
strength and the prevalence of that spicy/phenolic nose among Belgian
Ales is much more widespread than any similarity between various Trappists.
Consider what a British or German (lager) brewmaster would say if he/she had
a test batch with a new yeast smell like Tres Monts, Delerium Tremens
or Stoudt's Tripel... They would probably seal up the windows and fill the
brewery with sanitizing solution!
Do you see what I mean?
IMO, there is more variety in flavour and aroma among Belgian beers than in
the rest of the world combined. As they become increasingly available in
the US and as more progressive micros and brewpubs join the ranks of Stoudt's,
Joe's Brewery in Champaign-Urbana (they made a pKriek there) and New Belgium,
the less of a mystery Belgian beers will be. So get out there and taste
those beers -- seek them out -- talk to your beer store owners -- get them
to carry more Belgian beers -- urge your local micro or brewpub to try a
Belgian style -- convince your fellow club members to share the beers they
bring back from Belgium!
In retrospect, I think that maybe this is of general interest, so I'll
Cc the digest.
Al.
------------------------------
Date: 07 Nov 95 07:01:38 EST
From: Tim Fields <74247.551@compuserve.com>
Subject: Iodophor Summary
Here is a summary from my recent question: to rinse or not to rinse iodophor:
All responders said rinsing is not necessary. One uses 30ppm and rinsed and
15ppm and not rinsed. Other than this comment, nobody rinsed after using
iodophor, and I don't believe any let the vessel air-dry. They just let
it drip for a minute or so. One responder specifically mentioned yeast
culturing flasks (no rinsing), others referred to bottles and carboys.
I think Domenick Venezia best summed up the question of whether to rinse or not:
"So save some time and don't worry about iodophor--it's one of its
advantages that you've been missing".
"Reeb!" Tim Fields ... Fairfax, VA
timf@relay.com (non-brewing time)
74247.551@compuserve.com (weekends)
------------------------------
Date: Tue, 7 Nov 95 08:41:31 CST
From: "Tracy Aquilla" <aquilla@salus.med.uvm.edu>
Subject: Grain Mills
In Digest #1877:
Date: Sat, 4 Nov 1995 19:51:30 +0500 ET
From: "Keith Royster" <N1EA471@mro.ehnr.state.nc.us>
Subject: MW of nat.gas, propane, & air / Web pages / Glatt mill
Keith sez:
>And one last question. I was planning on asking for a Glatt Grain Mill
>for my birthday, but am now obviously concerned since they are going out
>of business that the warrently wouldn't be worth much. It was my
>understanding that this was *the* mill to have. So what would the
>experienced all-grainers recommend? Buy the Glatt and cross the fingers,
>or is there a close second placer?
You're lucky. You don't even have to settle for second best if you get a
MaltMill (JSP). Before buying mine I actually tested the three 'most
popular' brands at the time: Glatt, Phills, and the MaltMill. I think the
others are basically junk compared to the MaltMill. Maybe there's a reason
Glatt went belly-up? I have the $100 MM with fixed spacing and have used it
to crush all kinds of grains, including unmalted hard wheat, with no
problems. It's all you need and bullet-proof to boot. No gears to strip
either! Nothing I've seen even comes close to the MaltMill. (No affiliation
with JSP, just a happy customer.)
Tracy in Vermont
aquilla@salus.med.uvm.edu
------------------------------
Date: Tue, 7 Nov 1995 08:40:18 -0500
From: ac051@osfn.rhilinet.gov (Eric W. Miller)
Subject: re: Wheat beer question
jdickins@baste.magibox.net says:
>they all turned out tasting like tea does when you steep the
>teabag too long, BITTER
The nasty taste you describe as "BITTER" is probably astringency.
That's the tea-like flavor/feeling-in-my-mouth I get at the end
of a sparge.
>My gut feeling is this decoction crap
Let's not get emotional, Jim, this is supposed to be a *fun*
hobby!
>If anyone has any suggestions, I am open to them.
OK, I'll bite.
I've read a lot about how pH is very important in decoction
mashing. I'm not a pH checker and my decoctions have come out
wonderful, but that could just be a sign that I'm lucky enough
to have good brewing water and you're not. If you're so
inclined, you might want to check the pH of your decoction. If
I remember correctly it's supposed to be somewhere in the 5.6
to 5.8 range, but check those numbers first.
Another thing to watch is the consistency of the decoction. I
went overboard with keeping it thick at first and ended up with
something I couldn't stir. I was trying to heat it too quickly
and scorched the bottom. Still, it made fine beer, but cleanup
sucked.
You may be leaning the other way, with decoctions that are too
thin. I think that'll have a tendency to leach tannins from the
husks.
What I do is draw off the grains using a strainer and then add
water until it's just thin enough to stir (a bit thicker than
oatmeal).
Give it another shot. I'd recommend trying to make an altbier
first (since barley malt is a little easier to work with than
wheat malt) to get the technique down.
>As it stands now my wheat
>beer efforts will be put on hold, though I may try a non-decoction wheat
>beer, such as a belgain wit.
I did a wit as a triple decoction. Came out fantastic (took best
of show runner-up in a contest last weekend).
Good luck,
Eric Miller
Newport, RI
------------------------------
Date: Tue, 7 Nov 1995 08:42:44 -0500
From: ac051@osfn.rhilinet.gov (Eric W. Miller)
Subject: re: Irish Moss
Brian asks,
>Should I be worried that re-hydrated Irish Moss always smells like
>fish to me?
I've noticed the same smell. I wouldn't (and don't) worry about it,
though. After all, I have to stick my nose into the cup that I'm
rehydrating in to smell any sea-smell at all, whereas the beautiful
aroma of malt and hops fills the house. You should *definitely*
become a professional beer taster if you're able to detect fish
taste in the finished product!
Eric Miller
Newport, RI
------------------------------
Date: Tue, 7 Nov 1995 09:28:38 -0500
From: "Bob Hall" <bhall@sparc.ecology.uga.edu>
Subject: wheat beer and tannins
Regarding an astringent wheat beer:
>I have brewed several all grain wheat beers following eric warners directions
>to the tee and they all turned out tasting like tea does when you steep the
>teabag too long, BITTER. I am wondering why this might be. I've double
>checked everything I can think of and can come up with nothing. None of my
>other all grains turn out like this. The ONLY way I deviate from e.w. is my
>use of 1# more grain. My gut feeling is this decoction crap, I just knew the
>grains were never meant to be boiled.
Check the pH of the mash - it should be lower than 5.5. If not adjust with
calcium or acid. Assuming it is low, there should be no extraction of tannins
when boiled in a decoction. I have done lots of decoctions and never had a
tannic beer. My guess is that the temperature or pH of the sparge water is too
high, and you are leaching out tannins late in the sparge. Tannins are more
subject to leaching at high pH. Adjust pH of sparge water with acid
(lactic/phosphoric) to 5.7 or so, and quit sparging when the the gravity of the
runoff is 1.010. Wheat beers do not have any of the acidic compounds found in
dark malts , and may be more suceptible to leaching tannins in the sparge.
Bob Hall
------------------------------
Date: Tue, 7 Nov 95 10:02:03 EST
From: Pierre Jelenc <pcj1@columbia.edu>
Subject: Re: Bathing
In HOMEBREW Digest #1877 flemingk@usa.net (Kirk R Fleming) says:
>
> David Hill in #1875 asks for opinions regarding his idea of an oil
> bath "buffer" for heating a kettle. I think the idea is not too
> bad, but I'd recommend against using oil as the "working fluid".
Indeed. Chemists solved that question long, long ago with the use of a
sand bath. It works like a charm both as a buffer and as a diffuser, and
is non-toxic as well as non-inflammable.
Pierre
------------------------------
Date: Tue, 07 Nov 1995 10:29:51 EST
From: "Calvin Perilloux" <dehtpkn9@ibmmail.com>
Subject: Uncl: Airlock Fluid and Suck Back
>From HDB 1877:
>I strongly recommend against putting bleach in the airlock...
>...and a touch of vodka in your beer isn't going to hurt anything.
Vodka is the way to go. It's food grade stuff, it kills bacteria and
yeast given enough contact time (no problem with contact time in this
application), and it's cheap when you use only a half ounce of it at
a time.
>I've seen this suckback problem mentioned before in the digest but have
>never experienced it myself. In fact I never see the levels in the airlo
>indicate anything other than zero to positive differential pressure. Wha
>causes this?
Here's one example: When using a plastic fermentor, I sometimes got
air sucked back through the lock if I picked up the fermenter to move
it to a colder/warmer location. The bottom bulges out just a bit,
pulling in a few cubic centimeters of air. It probably sucked drops
of vodka in, too, but that's no problem. I'm glad I didn't use bleach!
Another time that I would expect it might happen, but I haven't seen it
in my experience over 60 batches, is that if there is a lot of headspace,
the yeast is almost completely done fermenting, and the beer is then
moved into a lagering phase where the temperature is dropped relatively
quickly from the 50's to the low 30's. The contraction of the CO2 gas
with the colder temperature could reduce the pressure inside to < 1 ATM.
(A spurious thought: What about a batch lagering with a lot of head
space during a hurricane, followed the next day by a a strong high
pressure system? Would the increase in outside pressure cause suck
back? But then your seals probably aren't THAT tight for such a slow
pressure change, not to mention that I doubt you'd be worrying about
suck back at the time.)
> ...In my opinion, any suck back
> problem draws contaminated outside air into the fermenter and should be
> avoided completely.
I would not put it so strongly unless you are running a closed system
where you never allow outside air to touch your wort or beer at all.
If you are the kind of homebrewer who sanitizes like absolute mad,
aerates only with pure O2, always purges the fermenters with sterile
gas of some sort, who bottles and kegs in a CO2 atmosphere (basically
runs a closed system the whole way from wort to bottle), and never
repitches yeast without analyzing for the few random wild yeasts or
bacteria, then worry about suck back. If you're like the rest of us
who tend to have less sterile systems, then modest suck back is not
a major source of problems.
Calvin Perilloux "Bayerisches Bier,
dehtpkn9@ibmmail.com Staerker als Heimweh"
Erding, Germany
------------------------------
End of HOMEBREW Digest #1878, 11/08/95
*************************************
-------
