Copy Link
Add to Bookmark
Report
HOMEBREW Digest #1533
This file received at Sierra.Stanford.EDU 94/09/22 01:15:42
HOMEBREW Digest #1533 Thu 22 September 1994
FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Rob Gardner, Digest Janitor
Contents:
some info about demerara... ("michael e cherry")
cutting fine slots (re: copper siphon loop) (Dick Dunn)
celis (Alan P Van Dyke)
Breaking glass (Mark Worwetz)
Re: Carboy handles (Carriers) (Dick Dunn)
Racking off in public 8-O (COYOTE)
Celis to Miller? NOT! (Louis K. Bonham)
temperature controller (DONBREW)
Aluminum again (McKee Smith)
Erlenmeyer flasks (IZZYYQ6)
INBOX Message (See Below) (Mailer.MC1)
Any Cincinnati Brewpubs? (Jon Higby)
Re: NY Beerfest 2 (John P. Curcio)
Fusel Alcohols ("Craig Amundsen")
Re: kegging .... (Keith Frank)
Re: anal requirement (Spencer.W.Thomas)
beer allergy response (Turner)
Celis Rumor (Tony Willoughby)
wyeast 3068 (BURNELLT)
Weihenstephen Yeast (Pronto Connections)
More Cider Info ("JOHN FAULKS, FAULKS@BNG.GE.COM, 607-770 3959")
Demerara=turbinado? (DrewStorms)
Beer Fests/Red Beer (PSTOKELY)
re: anal requirement (darrylri)
next piece of equipment, Pilsner Urquell (ESMPD)" <gcunning@Census.GOV>
Demerara: small correction (Matthew Sendbuehler)
hop plant sources/moving hop plants (S29033)
Primimg With Malt (DUBOVIK)
Competition Bottles (COYOTE)
******************************************************************
* NEW POLICY NOTE: Due to the incredible volume of bouncing mail,
* I am going to have to start removing addresses from the list
* that cause ongoing problems. In particular, if your mailbox
* is full or your account over quota, and this results in bounced
* mail, your address will be removed from the list after a few days.
*
* If you use a 'vacation' program, please be sure that it only
* sends a automated reply to homebrew-request *once*. If I get
* more than one, then I'll delete your address from the list.
******************************************************************
Send articles for __publication_only__ to homebrew@hpfcmi.fc.hp.com
(Articles are published in the order they are received.)
Send UNSUBSCRIBE and all other requests, ie, address change, etc.,
to homebrew-request@hpfcmi.fc.hp.com, BUT PLEASE NOTE that if
you subscribed via the BITNET listserver (BEER-L@UA1VM.UA.EDU),
then you MUST unsubscribe the same way!
If your account is being deleted, please be courteous and unsubscribe first.
FAQs, archives and other files are available via anonymous ftp from
sierra.stanford.edu. (Those without ftp access may retrieve files via
mail from listserv@sierra.stanford.edu. Send HELP as the body of a
message to that address to receive listserver instructions.)
Please don't send me requests for back issues - you will be silently ignored.
For "Cat's Meow" information, send mail to lutzen@novell.physics.umr.edu
----------------------------------------------------------------------
Date: Tue, 20 Sep 94 15:14:29 EST
From: "michael e cherry" <michael_e_cherry@fnma.COM>
Subject: some info about demerara...
In response to Ronald Dwelle's request (HBD #1531):
My Impossibly Large Dictionary of Silly Words (viz., my '66
450,000-word Webster's 3rd New International, Unabridged) has two
entries which may help:
demerara sugar: a coarse light-brown raw sugar
demerara greenheart: (from Demerara County, British Guiana):
see BEBEERU
which leads us to:
bebeeru: a tropical South American evergreen tree (Nectandra
rodioei) - aka greenheart
and then:
bebeerine (also bibirine) : (G bebeerin, fr bebeerubaum
bebeeru tree) - a crystalline alkaloid C36H38N3O6 known in two
optically different forms; esp. the dextrorotatory form
obtained from the bark of the bebeeru and the pareira - see
curine
lastly:
pareira: root of a South American vine (Chondodendron
tomentosum) of the family Memispermacae that is used as a
diuretic, tonic, and aperient : any of several roots of
related plants
curine: a crystalline alkaloid C36H38N2O6 obtained from the
tube curare : levorotatory bebeerine
Whew... it was just that sort of thing which brought my brief
premedical career to an inglorious halt, but then maybe you're a
more avid homebrewer than I. (I'd stay away from curare,
though... )
Mike Cherry
g8umec@fnma.com
------------------------------
Date: 20 Sep 94 11:42:55 MDT (Tue)
From: rcd@raven.eklektix.com (Dick Dunn)
Subject: cutting fine slots (re: copper siphon loop)
There was a suggestion to extend the idea of the siphon loop with finely
drilled holes by cutting fine slots instead, using a hacksaw.
If you want to cut very fine slots in metal (esp cutting across tubing like
this, where clearance isn't a problem) a jeweler's saw gives you a lot more
control. It looks like a coping saw but it's got thumbscrew clamps for the
blade--because jeweler's saw blades don't have pin ends, because it lets
you use a piece of a broken blade, and because it makes it more convenient
to start a cut in a closed hole. It's also got an adjustment for the
length of the saw (hence length of the blade used--again, also allows using
pieces of a broken blade).
The big plus of a jeweler's saw is that you can get blades covering quite
a range of widths of cut...starting from hacksaw width down to, well, the
finest blade I've got handy here is an 8/0 which has a blade width of
about 0.006" (about 0.15 mm).
Lubricate the blades with beeswax, and expect to break some anyway--that's
why they sell 'em by the dozen.
- ---
Dick Dunn rcd@eklektix.com -or- raven!rcd Boulder, Colorado USA
...Simpler is better.
------------------------------
Date: Tuesday, 20 September 94 15:40:20 CST
From: Alan P Van Dyke <llapv@utxdp.dp.utexas.edu>
Subject: celis
Andy A in HBD 1531 heard rumors that Celis had been bought out by Miller. I
haven't seen anything in the local daily about it, & Austinites are the type
to rise to arms about such things, anyway. When the Spoetzel Brewery, which
is 90 miles away, was bought out by the guy that imports Corona, people had
hissy fits for weeks.
So no, unless I'm really out of touch, Celis has not been bought by Miller.
Pierre loves his little enterprise too much to do so, from what I understand.
Then again, he did make a hefty profit when he sold Hoegaarden to Interbrew...
Alan of Austin
------------------------------
Date: Tue, 20 Sep 1994 15:24:20 -0600 (MDT)
From: Mark_Worwetz@Novell.COM (Mark Worwetz)
Subject: Breaking glass
Howdy from Zion!
All of this talk about broken carboys and Ehrlenmeyer flasks has compelled
me to write of my horrible experience with broken glass.
One nice Saturday afternoon this July my beer decided that it was done
fermenting and asked me to bottle it. I washed my bottles in the dishwasher,
sanitized my priming bucket, cooked up my priming sugar and settled down on
the floor of my kitchen to begin the happy tedium of filling two cases of
bottles. After filling about a dozen bottles I heard the loud crash of a
breaking, full bottle of beer. Then another, and another! Glass was flying
everywhere! I looked up just in time to see a man standing in my doorway
throwing bottles at me! He just stood there throwing them, saying "This one
isn't fresh anymore either!" and laughing maniacally!! I looked at the
broken glass all around me and, sure enough, they were old bottles of
Sam(tm) Adams(tm) Boston(tm) Lager(tm). I was too busy dodging the 12oz
glass missiles he was hurling to get a good look at him, and after about
30 seconds, he was GONE!
I only mention this story now because I could of sworn I heard the same guy
doing the same thing on the radio!
And that's the TRUTH!! SPFFFFFT!
- ------------------------------------------------------------------------------
Mark Worwetz
"I'd rather have a bottle in front of me, than to have to
have a frontal lobotomy!"
- ------------------------------------------------------------------------------
------------------------------
Date: 20 Sep 94 14:02:31 MDT (Tue)
From: rcd@raven.eklektix.com (Dick Dunn)
Subject: Re: Carboy handles (Carriers)
A while back, I surveyed the HBD readership for bad experiences with carboy
handles--the plastic-coated metal ring that fits the neck of a carboy,
with an attached plastic-coated metal loop handle. I think everyone who's
ever used one of these things has wondered "are they really safe for a full
carboy?" and a score of "what-if"s.
I found plenty of folks who use the handles on their carboys, full as well
as empty, and have been using them for some time, but turned up *no*
instances of the neck of the carboy breaking or any other sort of cata-
strophic failure. There was one report of a 6-gallon carboy showing some
stress cracks at the neck, but it didn't actually fail. (I've been puzzled
over what to make of that, because it was the only report of its type, but
the person who reported it seemed to know what he was talking about and had
looked at it carefully.)
caa@com2app.c2s.mn.org (Charles Anderson) wrote:
> I've used them, and my basic advice for other people that use them is:
> Don't use them for holding up the full weight of the carboy.
>
> I ended up with 5 gallons of good Cabernet Sauvignon on the floor of the
> basement because the "non-slip" rubber did...
I can't picture the accident. The way the handles are designed, the issue
of "slipping" doesn't arise. The ring of the handle fits around the neck
of the carboy, and there's no way it can slip off the neck unless it's not
snugged down the way it should be...it's made of 3/16" steel with a 1/4"
bolt to hold it in place. Similarly, the handle is a loop that you curl
your hand around. It doesn't matter if your hands are slippery; you've got
your fingers wrapped around the handle and the carboy would have to lift
itself up an inch or so to get over your fingertips.
In fact, the rubber (plastic actually) isn't there to prevent slipping;
it's for cushioning. The plastic around the carboy ring is there to spread
the lifting pressure around the neck. (This is why the handle should be
just snug, not gorilla-fisted down--if it's too tight, you'll compress the
plastic too much and create just the localized stress points the plastic is
designed to prevent.) The plastic on the handle loop is to cushion the
loop in your hand.
Next, jeff.guillet@lcabin.com (Jeff Guillet) wrote:
> The only reason I don't use one is because they are only designed to
> carry EMPTY carboys. They're not strong enough to carry a carboy full
> of liquid.
As various folks have noted, they ARE strong enough to carry a carboy full
of liquid. As for design...it's interesting that the handles don't carry
any warning NOT to use them to lift full carboys...at least they haven't
for many years and didn't the last time I looked. It's also interesting
that (at least) one supplier--Williams' Brewing--advises using them only
for empty carboys.
Somehow, using them only for empty carboys seems to miss the point...it's
not that much of a challenge to handle an empty carboy compared to a full
one. Why bother with a handle that's only useful for empty (but presents
such an obvious temptation to use it when full)? Also, the design (as I
mentioned, 3/16" steel) would be overkill for lifting a 10-lb object.
- ---
Dick Dunn rcd@eklektix.com -or- raven!rcd Boulder, Colorado USA
...Simpler is better.
------------------------------
Date: Tue, 20 Sep 1994 15:13:51 -0600 (MDT)
From: COYOTE <SLK6P@cc.usu.edu>
Subject: Racking off in public 8-O
Sorry folks- I oopsed, and cancelled the wrong BLANK post.
at least it hardly cost any bw! Do I feel like a newbie today?!
Here's the real waste of bw for your viewing pleasure:
From: COYOTE <SLK6P@cc.usu.edu>
Subject: Racking Off (in public! 8-O )
Subject: Mike asks: what is Racking ?
... Im man enough to not worry
What is Racking? I have seen it mentioned in a few posts and was wondering if
it is something that I have done already and not realized, or if it something
I have not done and should be doing.
* If you've been brewing you've probably done it, had it in your very own
hand and didn't even know what it was! (like the sign over a urinal-
Don't look up here- the jokes in your hand!)
My wife always gets a giggle when I reach the end of a brew session and
announce to her that I'm "racking off now" in the garage and will be in
for dinner soon. She kindly offers to help, but I tell her I can handle
it myself, but maybe she can help later! :)
Racking- on a more serious note: is.....drumroll please; To Siphon.
Comes at various stages of the brew process.
Post boil- cool. Rack sweet bittered wort to a primary fermenter.
Post primary fermentation. Rack to a secondary (optional step)
Post ferment- pre bottling. Rack from fermenter to bucket,prime,bottle.
Alternative- Rack from fermenter to keg. Carbonate.
Pretty much anytime you are pulling a siphon it's considered racking.
Leads to childish humor like that I expressed above. Boys will be boys.
Kinda reminds me of a cook crew I worked with on a camping trip.
We were making chicken in a VERY smokey fire, wrapped ourselved with
bandanas and glacier goggles ( I even had swim goggles) to avoid the smoke
and laughed as we doused the chicken with BBQ sauce about how we were the
best cook crew- and announced for all to hear that we were the
"M a s t e r B a s t e r s"
People wondered why we were so proud of such a thing.(esp the gals- guy thing?)
Maybe it was that funny wrapped bag someone tossed on the fire...whatever.
WE had a good time, and got awfully silly, plus made some damn good chicken!
Ever try putting chicken in a brew? A Fowl Ferment would result!
Cuckles and Giggles from the Coyote. AKA SLK6P@cc.usu.edu
------------------------------
Date: Tue, 20 Sep 1994 19:34:35
From: lkbonham@beerlaw.win.net (Louis K. Bonham)
Subject: Celis to Miller? NOT!
Agast at the rumor floated in HBD 1531 that Pierre Celis had sold
out to Miller, I called the Celis people in Austin today to get some
confirmation. After they quit laughing and rolling on the floor,
they told me that said rumor is absolutely, positively, false.
Beer lovers of the world, rejoice!
They did confirm, however, the reports that Celis *will* begin
marketing a frambois in late October.
------------------------------
Date: Tue, 20 Sep 94 23:12:03 EDT
From: DONBREW@aol.com
Subject: temperature controller
I too noticed the Radio Shack temperature controller module (277-123)
but, alas I was told that it had been discontinued sometime in 1993. But
since the recent post about it, I decided to have my local guy call National
Parts to check on it. It was still available on 9/19/94 at $19.95. I ordered
one, we'll see!
Am I the only one out here that has thought to boil in a PVC bucket
with a water heater element installed? I use a cut off 15 gallon 1.8 mm.
drum, cut off the top, install boiler drain, screw a 4500 W low density
element in the side, control the heater with an electric stove surface burner
"infinite control". Works good for me.
On another temp. note, has anybody else thought about building an
insulated box, get one of those old type de-humidifiers ( with radiators not
coils) pull the radiators apart (very carefully) put the cold side inside the
box, add a fan to circulate the cold wired to the control solenoid, I have
used several different thermostats that work in to different but acceptable
degrees.
Also I finally made Rodney Moriss' RIMS controller work by substituting
a 6 amp, 400 volt triac from Radio Shack for the 15 amp, ? volt one he used.
Hasn't blown up after some 100 hours or more. I also used PVC pipe and tube
for the plumbing and heater housing BTW.
Don
------------------------------
Date: Wed, 21 Sep 1994 02:07:01 -0400 (EDT)
From: McKee Smith <MCKSMI@delphi.com>
Subject: Aluminum again
In the most recent issue of Zymurgy, there was an insert page on
"Brewing you first batch" which I passed on to a friend who is just
starting out. He has since called me to point out that under the
equipment section, under brewpots, it says "Do NOT use
aluminum.S
Does anyone know why this is on there? I hope it is not yet
another case of "Aluminum causes alzhimers" phobia again. I
thought there had been enough information to drive a stake
through that myth.
McKee Smith
Irving, Texas, USA EMail: Mcksmi@Delphi.com
------------------------------
Date: Wed, 21 Sep 94 00:21 PDT
From: IZZYYQ6@MVS.OAC.UCLA.EDU
Subject: Erlenmeyer flasks
In response to a recent request(HBD 1527), I use small Erlenmeyer flasks
(250 ml) on a regular basis(not for beer), and have broken one by
heating over a direct flame & then cooling via cold water...
They are rather thin glass & really aren't designed to be used over
a flame. Get yourself a wire screen w/ a ceramic/clay center -- I
can't for the life of me remember the proper name for them, but they
should be readily available from a lab supplier(that's where I got
mine). It's basically a piece of wire screen about 8 inches square,
with a circle about 5 inches in diameter in the middle, made out
of clay or ceramic or something of that nature. The flame hits the
circle & is evenly distributed, therefore the flask is never directly
touching it and won't crack.
Don't cool the flask too quickly, allow it to do so naturally, since
most glass is sensitive to having the temperature change too quickly.
------------------------------
Date: 21 Sep 94 02:44:21 U
From: Mailer.MC1@hesdmail.mmm.com
Subject: INBOX Message (See Below)
InBox Message Type: Error
InBox Message Subject: Undeliverable message
InBox Message Text Follows:
Message not delivered to 'MC2' (Disk full)
- ------------------------- Original Message Follows -------------------------
Message too large (greater than 30000 bytes).
See enclosure!
- ------------------------- RFC822 Header Follows -------------------------
Received: by hesdmail with SMTP/TCP;21 Sep 94 02:41:25 U
Received: from pigseye.mmm.com by mmm ( 3M/SERC - 4.1/BDR-1.0)
idAA27078; Wed, 21 Sep 94 02:53:04 CDT
Errors-To: homebrew-request@hpfcmi.fc.hp.com
Received: by pigseye.mmm.com (4.1/SMI-4.1)
id AA22215; Wed, 21 Sep 94 02:47:21 CDT
Errors-To: homebrew-request@hpfcmi.fc.hp.com
Errors-To: homebrew-request@hpfcmi.fc.hp.com
Received: from hpfcrdg.fc.hp.com by hpfcla.fc.hp.com with SMTP
(1.37.109.4/15.5+IOS 3.20) id AA18689; Wed, 21 Sep 94 01:36:16 -0600
Received: by hpfcmi.fc.hp.com
(1.36.108.4/15.5+IOS 3.22) id AA17754; Wed, 21 Sep 1994 01:01:08 -0600
Date: Wed, 21 Sep 1994 01:01:08 -0600
Message-Id: <9409210701.AA17754@hpfcmi.fc.hp.com>
To: homebrew@hpfcmi.fc.hp.com
From: homebrew-request@hpfcmi.fc.hp.com (Request Address Only - No Articles)
Reply-To: homebrew@hpfcmi.fc.hp.com (Posting Address Only - No Requests)
Errors-To: homebrew-request@hpfcmi.fc.hp.com
Precedence: bulk
Subject: Homebrew Digest #1532 (September 21, 1994)
------------------------------
Date: Tue, 20 Sep 1994 16:38:52 -0500 (CDT)
From: unisql!jonh@cs.utexas.edu (Jon Higby)
Subject: Any Cincinnati Brewpubs?
I will be in Cincinnati for 2 weeks (Oct 2 - Oct 14) and hope that there
are some brewpubs to past the time at.
I already looked at the pub FAQ, the only brewpub listed there is
apparently closed. Any help - please!
Jon
- --
Jon Higby ---- UniSQL, Inc. ---- email: jon.higby@unisql.com
------------------------------
Date: Wed, 21 Sep 94 08:35:38 -0400
From: John P. Curcio <jpc@philabs.Philips.COM>
Subject: Re: NY Beerfest 2
On 19 Sep 94 22:24:25 EDT 74021.376@compuserve.com wrote:
> I do not know if this has been posted yet, but I am falling behind in
> reading the HBD and yet had to comment on the NY Beerfest 2.
> After attending last years Beerfest, I was looking forward to an
> interesting day tasting and talking beer. And after reading in the Ale
> Street News that the Port-O-John problem was going to be taken care of
> this year (1/2 hour waits for relief last year), I thought it would be
> perfect. Boy, was I wrong.
[details deleted]
My take on the event is exactly the same as yours. I was severely
disappointed, for many reasons. About the only thing you didn't
mention was the BudMilloors crowd that was there (suprisingly large in
numbers) commenting on how "this Celis stuff sucks" or "I had to dump
out the Chimay-- it tasted like crap."
> All right, I've said my piece, as rambling and uncoherent as it is.
> Thanks for your patience. Does anyone know how to contact Steve Hindy
> or any of the other organizers? Perhaps if enough people express their
> discontent now, changes can be made that will allow us to enjoy
> Beerfest 3. Otherwise, I would have to believe that the Beerfest will
> die a quick death due to too many unhappy customers.
I wrote a letter (mailed yesterday) to the Fund for the Borough of
Brooklyn, the sponsor (and beneficiary) of the event. I mentioned the
problems, and said that I knew of at least 30 people who wouldn't
attend next year unless these problems were addressed. Their mailing
address:
The Fund for the Borough of Brooklyn
30 Flatbush Avenue Suite 427
Brooklyn NY 11217
I suppose that you could also call their number ((718) 855-7882) and
register a complaint, but a letter seems like it would do more good...
-JPC
-<=>- Just say NO! to Budmilloors... Support your local MICROBREWERY -<=>-
John P. Curcio jpc@philabs.philips.com Philips Labs Briarcliff Manor, NY
"If nothing beats a Bud, given the choice, I'd take the nothing..."
"No goats, no boats, no motorcars, not a single 'yes-siree!'" -BH
------------------------------
Date: Wed, 21 Sep 1994 07:45:11 -0500 (CDT)
From: "Craig Amundsen" <amundsen@molbio.cbs.umn.edu>
Subject: Fusel Alcohols
Hi -
I seem to recall someone saying that fusel alcohols result from allowing the
beer to ferment in the presence of the trub. I recently acquired a copy of
_The Practical Brewer_ (put out by the Master Brewers Association of the
Americas). I've been making my way through it during breaks from studying for
my Orals. Just yesterday I read this (on p. 106):
Individual amino acids provide the carbon skeleton for fusel alcohols
and esters via the Ehrlich mechanism. Addition of leucine to wort
gives beers high in isoamyl alcohol and isoamyl acetate. Threonone
and isoleucine provide optically active amyl alcohol, and valine
gives isobutyl alcohol and isobutyl acetate.
Based on the above it seems that getting rid of the break material will have
no effect on fusel alcohols since individual amino acids will be in solution.
This observation made me happy because my latest batch (currently in the
primary) saw the first use of my immersion chiller and I made no effort
to remove the break before transferring to the carboy. It may be that the break
will have some other deleterious effect on the beer, but I am not worried
about its contribution to fusel alcohol production.
- Craig
amundsen@molbio.cbs.umn.edu
------------------------------
Date: Wed, 21 Sep 1994 08:20:33 -0500
From: keithfrank@dow.com (Keith Frank)
Subject: Re: kegging ....
Andrew W. Baucom writes:
>Question: What CO2 pressure/time-length is needed to artificially carbonate
>5 gallons O'beer?
>
>(the keg is refrigerated, the CO2 is not, and the beer was primed with ~1 cup
> malt extract for several weeks and had pressure when I initially tapped it)
>
>PS...the beer tastes great...just flat...
No problem. Pressure up to 35 to 40 psi and shake for several minutes.
Then let the beer settle for several hours before bleeding down the
pressure and sampling.
Regards,
Keith Frank (keithfrank@dow.com)
------------------------------
Date: Wed, 21 Sep 94 09:31:16 EDT
From: Spencer.W.Thomas@med.umich.edu
Subject: Re: anal requirement
The idea is that uniquely identifiable bottles may be recognized by a
judge as having come from a person he/she knows, and that this may
then affect the judging. Same with stuff on the caps. I could tell
my friend "I entered my number 34 in the Vienna category," and then
he'd just have to look for the 34 on the cap to know it's mine.
Also, small/big bottles are a pain in the butt to store when you're
trying to pack a few hundred beers into your basement before the
competition begins. If all the bottles are 12-oz longnecks, then you
can just put them uniformly in cases.
I don't know what's the problem with clear bottles, though.
For what it's worth, I've been associated with two competitions here
(Mazer Cup Mead, and MI state fair) that have no such restrictions on
bottles, and we haven't had a problem. But you still get the idiots
who paste a fancy label on the bottle with their name, etc. on it.
The registrar for this year's MI state fair spent too much time
soaking off labels.
------------------------------
Date: Wed, 21 Sep 94 08:34:41 EST
From: turner@cel.cummins.com (Turner)
Subject: beer allergy response
First of all seeing an allergist is a definite recomendation. By narrowing
down the search (beer) the doctor can perform the scratch test better. As
a victim of a still unknown allergy I can say that shooting in the dark on
those tests is expensive and has low probability of success.
Several people also warned about the possibility of anaphalactic (sp?)
shock. I have had this lecture from my doctor and carry an Epinephrine
pen to counter a severe allergic reaction. For those unfamiliar with it,
this is what can _KILL_ people, most commonly from bee stings. This is not
something to take chances with.
The end result from all the replies is that just about anything in beer can
cause an allergic reaction. Based solely on the responses, the leading
suspects are:
1) hops
2) yeast (sometimes specific strains of yeast)
3) grain/grass (barley/corn/rice/wheat)
4) chemical additives (head stabilizers etc.)
5) fermentation dyproducts (acetaldehyde/protein)
My friend eats homemade bread all the time (farm boy) and drinks wine, so
yeast is an unlikely candidate. This is good since home brew would have
considerrably more yeast than commercial brews. He eats corn/rice and has
no problem bailing hay, or with traditional pollen/ragweed allergies, so
an overall sensitivity to grain/flowers is unlikely.
He is going to see an allergist and wants to try one of my VERY low hopped
brews. If it shows promise I will try a no hops brew.
My (and my friends) thanks to everyone who responded to my question concerning
a friends allergy to beer. Once again this forum has provided valuable
information not readily available from any other source.
John Pedlow <TKSJOHN@UBVM.cc.buffalo.edu>
Jim Grady <grady@hpangrt.an.hp.com>
zoz@cs.adelaide.edu.au (Kaishakunin)
romand@dialogic.com (Dan Roman)
edmondso@athena.msfc.nasa.gov (St. Rich Brewing Co., Huntsville, AL)
Spencer.W.Thomas@med.umich.edu
laszlo@helix.nih.gov (M. Andrew Newman)
Bryan Kornreich <bkornrei@welchlink.welch.jhu.edu>
LBRISTOL@SYSUBMC.BMC.COM
Vanek@aepco.com
Allen Akin <akin@tuolumne.asd.sgi.com>
"Bob Knetl" <bob_knetl@amber.spawar.navy.mil>
"Terence McGravey {91942}" <tpm@swl.msd.ray.com>
ggarnett@qrc.com (Guy Garnett)
Steve Turner turner@cel.cummins.com
------------------------------
Date: Wed, 21 Sep 1994 09:49:34 -0400 (EDT)
From: Tony Willoughby <tonyw@sw.stratus.com>
Subject: Celis Rumor
Andy <Anderso_A@hq.navsea.navy.mil> asked about a Celis rumor:
[...]
Over the week-end I was told by two
completely different, and reasonably reliable, sources that
Pierre Celis has just recently sold his Austin operation to
Miller.
[...]
I forwarded this to a coworker who knows Pierre's son-in-law, Peter. Peter
is involved with the day to day running of the brewery, so he could also
be considered "reasonably reliable" :^). During a phone call to Texas
this rumor was quickly squashed.
Just contributing to the rumor with a Friend-Of-A-Friend story...
- --
| He that buys land buys many stones.
Tony Willoughby | He that buys flesh buys many bones.
tonyw@sw.stratus.com | He that buys eggs buys many shells,
| But he that buys good beer buys nothing else.
| - An Old English Saw
------------------------------
Date: Wed, 21 Sep 1994 09:57:22 -0500 (EST)
From: BURNELLT <BURNELLT@ropt1.am.wyeth.com>
Subject: wyeast 3068
Mike Hansen comments that he felt that Wyeast 3068 should have been used in his
dunkelwiezen bock for a more authentic flavor.This may be true but I used 3068
in a dunkelwiezen and a lot of the banana and clove flavor that I had in
previous wiezens seemed to be covered up by the flavors contributed
by the grains(I could barely taste this character). I would guess that this
would be even more of a problem with a bock because of the increased hops. Sam
Adams dunkelwiezen does have nice flavor from the yeast, but I did not have
luck in replicating it. I may have used to much chocholate malt. Any recipes
out there?
Ted Burnell
------------------------------
Date: Wed, 21 Sep 1994 08:59:57 -0500 (CDT)
From: Pronto Connections <tmmpci@Mcs.Net>
Subject: Weihenstephen Yeast
Hey fellow Brewers,
Anyone have any particulars on the Weihenstephen yeast strain from ???
Wyeast.
Also requesting an all grain raspberry wheat beer recipe? Using fresh
ingrediants only!!!
tia,
Todd
------------------------------
Date: Wed, 21 Sep 1994 9:53:55 -0400 (EDT)
From: "JOHN FAULKS, FAULKS@BNG.GE.COM, 607-770 3959" <FAULKS@bng.ge.com>
Subject: More Cider Info
There have been a few requests for hard cider now that the apple
season is here.
Some suggestions to get started. The quick and easy way is to use
fresh cider without any additives, stir in a half to a pound of white
sugar per gallon to get the gravity up to 1070 or more, and ferment
with champagne yeast. If allowed to go all the way (FG approx 0995)
it will make a fine dry cider. Give it 3-4 months to ferment out and
bottle (rack to a secondary if you must - it makes little difference
IMHO). Prime the bottles for sparkling cider.
Variations - use campden tabs in the fresh cider and wait 24 hrs
before pitching your yeast starter. This will help decide which yeast
are really going to do all the work. Wine and ale yeasts also work
well as can natural yeasts, i.e. fresh cider, sugar and let it go off
by itself.
Had a friend make Scrumpy from the Cats Meow - something went wrong -
came out like gasohol, so don't add meat. But you can use brown sugar,
honey and any other more traditional sweetner to bring up the gravity.
More sugar will produce a drier cider with less apple flavor, so I
don't usually target OG's over 1100. You really need more than 1050 to
produce enough alcohol to preserve the final cider. The lower OG's can
have a wonderful apple aroma and flavor.
For sweet ciders, stop the fermentation at about 1015 or so with some
campden tabs. Wait 24 hrs and bottle. Some people add condensed apple
juice to add sweetness, but I haven't tried it.
Don't boil anything. You can also use 1 gal glass bottles for mini
batches and experiemnts.
There is an excellent book that I have, but it's not here and the name
escapes me (red cover - deals with growing trees, blending - all kinds
of recipies, history etc.) Email me for the name and I will find it.
Isn't there a Cider Digest out there ? That might also help the
curious (and me too)
Have fun
John Faulks
------------------------------
Date: Wed, 21 Sep 94 10:19:56 EDT
From: DrewStorms@aol.com
Subject: Demerara=turbinado?
All these descriptions of demerara sugar sound suspiciously like turbinado
("sugar in the raw"): golden-brown,1-2mm granules, .... I also know that
turbinado is fairly popular in the U.K., and that it is what brown sugar
(white+molasses) is attempting to emulate: raw, unrefined cane sugar. So, my
question is does anyone know if they are synonymous, and if not, has anyone
used turbinado in brewing? It would seem to be one step up from corn sugar
as an adjunct. (and I've got a bulk source 100' from my back door)
drew
------------------------------
Date: Wed, 21 Sep 1994 09:49:10 EDT
From: PSTOKELY@ea.umd.edu
Subject: Beer Fests/Red Beer
Jim Keesler wrote of his problems with the NYFest.
Most of the beer/food fests held in large cities are
overattended. The recent Washington D.C. Food and Beer Fest, for
instance, featured several excellent microbrews and several 30 - 45
minute waits to get them. If it weren't for the mini-seminars held in
the nearby Capitol City Brewery, it would have been a waste of time.
My first response was to locate the organizer's table and sign up to
help out next year. Getting the District government to close off TWO
city blocks is work for several people for many weeks.
Of course my second response, after a certain fellowship expires,
is to move away from the city to where the beer fests are like
picnics.
**********************
A question for Algis: how much roasted barley do you use to get
your red color? For instance in a 5 gal. batch with a grain bill of
Klages and light crystal. TIA
Paul S. in College Park, Maryland "Look out! Behind you!"
------------------------------
Date: Wed Sep 21 07:48:04 1994
From: darrylri@microsoft.com
Subject: re: anal requirement
ulick@ulix.rad.nd.edu writes:
> What is wrong with clear bottles, big bottles, Bass bottles, overrun caps?
While I agree with your plaint about clear bottles, as someone
who has helped out with a number of competitions, I can
unhesitatingly say that big bottles are a huge hassle. They
don't fit in standard cases, so they don't stack well, which
takes additional fridge space, which is *always* in short
supply.
> While it is understandable that the nationals have standards to lend an aura,
> this is hardly the case for a competition in Podunk, NY, or whereever. And
> I know the judges are just as anal, because one once made a big stink about
> my 'clear violation' sending a bottle with raised lettering. Yet another
> reasaon not to pay people to drink my beer.
Judges do attack these things with more vigor than is called for,
in some cases. (I'm reminded of the hue and cry of those poor
folks who were weak enough to succumb to using green bottles
instead of brown and then got comments about light struck
flavors, even though most hb'ers never let their precious beer
get exposed to light.) Actually, this is something that the
contest registrar should be responsible for, not the judges.
But to maintain the appearance of impartiality, it is necessary
to limit the variances in the container. And not just from the
judges, either. I've heard a recent story where an onlooker
recognized their bottle as placing first in a category, and then
started participating in the BOS round when a couple judges
wanted to drop it out of the competition.
Most competitions allow overrun caps, once you take a Magic
Marker to them.
Basically, most of the rules are useful and important. If
you've worked on a competition you know that by stating these
things up front it eliminates a great deal of potential
difficulty when the competition is under way. Without such
limits, you'd be amazed what you'll get, and there's no way to
eliminate judge bias when things get strange. These rules
aren't *that* anal.
--Darryl Richman
------------------------------
Date: Wed, 21 Sep 1994 10:29:59 -0400 (EDT)
From: "Jerry Cunningham (ESMPD)" <gcunning@Census.GOV>
Subject: next piece of equipment, Pilsner Urquell
Hello Brewmasters,
I have a very _limited_ budget. I'm slowly adding brewing equipment to my
stockpile, and my question for all you experts out there is this: What would
have a bigger (positive) impact on my brews, a carboy to use as a secondary
or a wort chiller (imersion type). My current set-up is is a plastic primary
with bottling bucket, and I'm only making ales so far (although I may try a
lager or two this winter, if my basement gets cold enough), extract only.
- -------
A while back, someone posted asking if anybody knew how to read the code on
Pilsner Urquell bottles. I never saw a reply (and I lost the guys address).
Does anybody know? BTW, after reading much hoopla from various sources - rcb,
hbd,TNCJOHB,M.J.'s Beer Companion,etc. - concerning P-U, I finally tried one
recently, and if that's what it tastes like after crossing the Atlantic I'm
moving to friggin Czechoslavakia (sp?). If you've never tried it, do yourself
a favor! :*)
- -------
Thanks,
Jerry Cunningham
Annapolis, MD
------------------------------
Date: Wed, 21 Sep 1994 10:53:02 +0059 (EDT)
From: Matthew Sendbuehler <sendbu@mcmail.cis.mcmaster.ca>
Subject: Demerara: small correction
In one of several responses to the 'what is Demerara sugar'
question, I wrote:
>>>look for large (1-2 mm) clear crystals of a light golden colour.<<<
Several of the other responses jogged my memory and made
me realize that I was thinking of Turbinado, not Demerara,
AFAIK, Turbinado is even harder to find, but is probably even
more useful for a pale ale.
BTW, the differences between these sugars is not just in the
level of refinement, but where they come from. Of course,
once you get down to a white powder origin doesn't make much
if any difference, but before that stage cane sugars definitely
have distinctive local flavors. Two experiments will bear
this out: 1) sample some of these different specialty
sugars; 2) sample high-grade (estate) rum from a variety of places.
In both cases, you'll see that all sugar, and all molasses,
is not created equal.
I'll leave it to you to decide which experiment to try...
And for heaven's sake, if you're going to add molasses to
your beer, shop around a bit, find one with a taste you like,
and *go easy with the stuff.* Personally I'd avoid this
route altogether.
------------------------------
Date: 21 Sep 1994 10:47:56 -0400 (EDT)
From: S29033%22681@utrcgw.utc.com
Subject: hop plant sources/moving hop plants
Kevin [KFONS@china.qgraph.com] asks where to find hop plants. I can only offer
one source (and I am sure there are other readers who know of more sources). I
ordered my hop plants from Nichols Nursery in Oregon, Tel (503) 928-9280. I
have ordered 4 different types from them (commonly used in brewing); cascade,
tettnanger, willamette, clusters. Other hop types were found through
homebrewing contacts - I traded my hop cuttings with another person with
different hop varieties. a couple of years of growth produces enough rhizomes
to allow you to spare a few cuttings for trade.
Tim McNerney asks about hop transplanting. I too started some hops at a
previous residence and 2 years later we moved to our present location. We
moved in the Fall and I dug the hop roots up (with some of the surrounding
soil) and transferred the whole mess to the new house. I dug a hole in the new
location and filled it with the soil I gathered from the old location. I then
looked at the hop roots and cut the rhizomes into 6-8 inch lengths (not all of
the roots had the characteristic buds on them and were apparently not
transplantable). I then planted the rhizomes in the place I had prepared.
They wintered over fine and came up this spring. Transplanting does interrupt
the previous vigorous growth but I am sure next year the hops will be back to
normal. The friend that I trade cuttings with actually digs his up and cuts
them into 6-8 inch lengths and stores them in a plastic bag in his fridge for
planting the following year. I don't know if he digs all of the roots or just
some of them so that he can manage or steer the spreading of the plants (they
tend to spread everywhere!). So in my experience and the experience of a
friend, you can either transplant them now, dig them up and store them (make
sure they don't dry out), or leave them and transplant in the spring. I hope
this helps.
Lance Stronk
Sikorsky Aircraft, Straford, CT
------------------------------
Date: 21 Sep 1994 11:38:52 -0400 (EDT)
From: DUBOVIK@hsdwl.utc.com
Subject: Primimg With Malt
I've primed my beer with both malt and corn sugar. The beer (same batch)
tasted the same for either method. Does any one else have different
results priming with malt. Any pro's con's with either method.
Responses greatly appreciated
Brewing In Ct.
------------------------------
Date: Wed, 21 Sep 1994 10:03:41 -0600 (MDT)
From: COYOTE <SLK6P@cc.usu.edu>
Subject: Competition Bottles
Ulick whines about competitions having rules and regulations.
Waaaaaaaaaaah.
The WHOLE point here isn't to quibble over whether YOU got a complaint
about YOUR bottle or not (BTW- did you place with that brew- I wonder!)
but to ensure equal treatment and anonimity to all entries.
It is the BEER that is being judged, not the cutesiness of the homemade
labels, or the creativity in naming a brew. Competitions are BLIND
tasting. If bottles, or caps are unique they may enlighten the judges
as to the originator of that brew, hence the potential for unfare judging.
It's not like you don't have a chance to be aware of the rules ahead of time.
They are CLEARLY stated in every competition announcement I've seen.
So ignorance of the rules is NO defense.
Clear bottles are subject to skunking (green too, but not as bad) so that's
for the brewers protection. Delabeling, and caps, and raised lettering are
to "unidentify" an entry. Size is semi flexible, but limited to a useful
quanitity. I mean- what are the judges going to do if you send all 22 oz
bottles! They might get unfailry drunk off one entry and not be capable of
"testing" the remainder!
And no- You couldn't pay me to drink your beer either, no matter what kind
of bottle it came in.
Worthless babble from the Coyote.
------------------------------
End of HOMEBREW Digest #1533, 09/22/94
*************************************
-------
