Copy Link
Add to Bookmark
Report
HOMEBREW Digest #0457
This file received at Mthvax.CS.Miami.EDU 90/07/11 03:11:57
HOMEBREW Digest #457 Wed 11 July 1990
FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Rob Gardner, Digest Coordinator
Contents:
RE: Homebrew Digest #456 (July 10, 1990) ("BONAR")
TA-DUM! The FINAL word on Bud kegs (hopefully) (Kenneth R. van Wyk)
Uncarbonated Ginger Pale Ale advice (cckweiss)
Xingu (Ken Ellinwood)
Edme Dry Yeast... (John Post)
Send submissions to homebrew%hpfcmr@hplabs.hp.com
Send requests to homebrew-request%hpfcmr@hplabs.hp.com
Archives available from netlib@mthvax.cs.miami.edu
----------------------------------------------------------------------
Date: 10 Jul 90 08:14:00 EDT
From: "BONAR" <bonar@pine.circa.ufl.edu>
Subject: RE: Homebrew Digest #456 (July 10, 1990)
Hi all,
Just a quick question on brewing groups and sources of good beer. In
a little while I will be moving to Baton Rouge. Does anyone know of good
places for beer in the Baton Rouge area (including New Orleans)? How about
supply shops? Thanks
Dave
bonar@pine.circa.ufl.edu
------------------------------
Date: Tue, 10 Jul 90 11:05:23 EDT
From: Kenneth R. van Wyk <krvw@cert.sei.cmu.edu>
Subject: TA-DUM! The FINAL word on Bud kegs (hopefully)
Ok, before we put this subject to pasture, I have one more thing to
add. First off, though, I'd like to thank all the folks who sent me
email about the Bud keg idea. We have a truly great group of people
here!
Doug Roberts (and others) suggested that not all stainless steel has
magnetic properties. I wasn't aware of this, since I figured that any
material that is ferrous-based would have some magnetism. So, when I
tried the magnet on my keg and it didn't work, I wrote it off for an
aluminum alloy.
Then, when people suggested otherwise, I decided to put an end to all
of this speculation and do something drastic - ask. I called the
Annheuser-Busch Brewery (sp?) in St. Louis (314-577-2000) and asked
them - figuring that the worst that could happen is that this would
fail differently than my previous efforts. Well, eventually, I got
transferred to an engineer who was very helpful; he told me that the
kegs are made out of 304 Stainless Steel.
Now, I'm still curious as to the makeup of this alloy (I did take a
course in metallurgy back during my mechanical engineering days).
When I'm home, I'll check my old texts for mention of this alloy and
see. If this turns up anything earth shattering, I'll post.
Otherwise, I'll spare the net with the details.
Still, it would appear that we have a good cheap source for stainless
steel kettles. Grand total: $10 and some effort (which is yet to be
determined in my case). Capacity of a 1/4 keg, btw, is 7.75 gallons.
Case settled, right? *One* more question ;-} - has anyone using these
things come up with a good technique for pouring the (cooled) through
a filter system and into the primary? It would appear that the handle
"ring" (for lack of a better term) at the top would at least partially
obstruct easy pouring of the wort, and siphoning would be next to
impossible with the whole leaf hops in my wort. Suggestions anyone?
Cheers,
Ken
------------------------------
Date: Tue, 10 Jul 90 08:30:43 -0700
From: cckweiss@castor.ucdavis.edu
Subject: Uncarbonated Ginger Pale Ale advice
Thanks to all who have offered help on my stubborn Ginger Pale Ale. in
HBD #456 Glenn Colon-Bonet suggested that dried-out cork bottlecap liners
may have been responsible. Sorry, Glenn, but these were the nice modern
silicon-rubber lined caps. Good thought, though.
Eric Pepke's note about having carbonation problems when using _unpeeled_
ginger root might just be on the money. For sure I didn't peel the ginger
before grating it. Any of you chemist types out there want to analyze
some ginger peel and see what's in there that might shut down yeast? As I'm
not totally wild about the taste of the brew, I'll probably just never
try ginger beer again, and maybe that'll be the end of this sordid episode...
Ken Weiss
krweiss@ucdavis.edu
cckweiss@castor.ucdavis.edu
------------------------------
Date: Tue, 10 Jul 90 10:51:00 PDT
From: aimla!diamond!ken@suntzu.West.Sun.COM (Ken Ellinwood)
Subject: Xingu
> I think it is safe to say the tribal spitting
> no longer takes place and Xingu uses more Imperial practices.
Oh, darn!
------------------------------
Date: Tue, 10 Jul 1990 11:47:28 PDT
From: post%lis.llnl.gov@lll-winken.llnl.gov (John Post)
Subject: Edme Dry Yeast...
Joe P. writes...
> What is the current consensus on Edme Dry Yeast...
I have used this twice. The first time was on my Christmas Ale last year.
This beer started out nicely, but started gushing after a couple of
months in the bottle...Tasted OK, so what the heck, I thought...Then, I
recently used it on another ale recipe. Vigorous fermentation, dying down
after about four days. "Better rack 'er over" says I. Son of a gun, I
got a (healthy) secondary fermentation after racking. "Damn!" says I,
"Better have a homebrew and call Burch to see if I should worry..." So I
called Byron Burch up at GF, and he says "Oh yes, there have been some
indications that Edme Dry may be contaminated with a wild yeast
strain"(this isn't exactly what he said, but you get the drift...).
Sooo...I'm letting it go, and I'll drink it if it doesn't taste too bad (
it is truly AMAZING what six months in the bottle and a low inventory can
do for the taste of a beer).
BUT, I ain't using that stuff any more! As
a matter of fact, I'm switching to the Wyeast stuff. I grow my own hops,
so I hope I can afford the $3.50 a batch...
- --------------------------------------------------------------------------
| post@vaxt.llnl.gov |"...It's only MY opinion...Not their's..."|
| post@lis.llnl.gov |"The Most Important Thing Is To Be There' |
| | ...Dr. Milton Drandell, Cal Poly SLO |
|John Post, Lawrence Livermore| ....I'm Relaxing...I'm Not Worrying.... |
|National Labs (415) 423-9981 |.......Just Wish I Had A HomeBrew...... |
- --------------------------------------------------------------------------
------------------------------
End of HOMEBREW Digest #457, 07/11/90
*************************************
-------
