Copy Link
Add to Bookmark
Report
HOMEBREW Digest #0118
HOMEBREW Digest #118 Mon 03 April 1989
FORUM ON BEER, HOMEBREWING, AND RELATED ISSUES
Rob Gardner, Digest Coordinator
Contents:
Re: Re: liquid yeast (Dr. T. Andrews)
Re: hop pellets and lauter tun/hop backs (Dr. T. Andrews)
Send submissions to homebrew%hpfcmr@hplabs.hp.com
Send requests to homebrew-request%hpfcmr@hplabs.hp.com
----------------------------------------------------------------------
Date: Sun, 2 Apr 89 9:04:40 EDT
From: Dr. T. Andrews <tanner@ki4pv>
Subject: Re: Re: liquid yeast
) [ on the problems of pitching directly into wort v. darkening
) effects of canned sterile wort used to start yeast ]
I don't think that I would attempt to pitch liquid yeast directly
into the 5 gallons; there is simply too much beer for too little
yeast. The lag time would be too long (well, I prefer a lag time of
about 2 minutes before I can smell the CO\s-2\d2\u\s+2 and other
pleasant odours of fermentation).
I don't keep sterile wort on hand, either. When I plan to make beer,
I sterilize a half-gallon glass vessel (the usual bleach-water) and
produce some boiled wort on the spot. Use light-coloured DME, boil
it for a few minutes, cool it, and pour into the glass vessel. Add
yeast to this. Cover with clean saucer, or use sterilized plug &
bubbler.
I pitch the yeast, with wort, into the beer.
If I were really worried about keeping the colour light, and needed
canned wort, I might make a batch of sterile wort by mashing a couple
of pounds of pale lager malt, boiling the resultant barley-water, and
canning. The DME wort is generally darker than from pale grain.
Dr. T. Andrews, Systems
CompuData, Inc. DeLand
------------------------------
Date: Sun, 2 Apr 89 9:11:31 EDT
From: Dr. T. Andrews <tanner@ki4pv>
Subject: Re: hop pellets and lauter tun/hop backs
On lauter-tuns: I have one of those lautering bags, and it would
indeed be very handy \(em if I had a bucket with a spigot on the
side, so that I didn't have to remove the grain to pour off the
barley-water. This is No Fun. Until I get another large bucket into
which I can put a spigot, however, I am stuck with removing the grain
to pour off the barley-water.
For this reason, this past week I drilled about 300 holes in the
bottom of a smaller bucket which fits neatly into the large bucket.
It was far less painful to lift the grain to pour off the barley-water.
On hops: I always use one of those hops bags for pellets. If I am
using more than one type of pellets, or inserting the same variety
at two points in the boil, I use more bags. They're (a) dirt cheap
(b) easily cleaned after use with pellets. Keep 4 in your beer-making
drawer. That way you have a spare.
Dr. T. Andrews, Systems
CompuData, Inc. DeLand
------------------------------
End of HOMEBREW Digest
