Copy Link
Add to Bookmark
Report
Mead Lovers Digest #1464
Subject: Mead Lover's Digest #1464, 27 March 2010
From: mead-request@talisman.com
Mead Lover's Digest #1464 27 March 2010
Mead Discussion Forum
Contents:
Re: Mead Lover's Digest #1463, 20 March 2010 (Mike Faul)
NOTE: Digest appears whenever there is enough material to send one.
Send ONLY articles for the digest to mead@talisman.com.
Use mead-request@talisman.com for [un]subscribe and admin requests.
Digest archives and FAQ are available at www.talisman.com/mead#Archives
A searchable archive is at http://www.gotmead.com/mldarchives.html
Digest Janitor: Dick Dunn
----------------------------------------------------------------------
Subject: Re: Mead Lover's Digest #1463, 20 March 2010
From: Mike Faul <mfaul@faul.net>
Date: Sun, 21 Mar 2010 17:53:56 -0700
Not a problem. Just stopper it up and wrap the bung with some tape
and move it. I once moved a homebrew mead while fermenting as part
of a moving company move of my home from Maine to California. In
December.
Mike
> Subject: Re: reusing bottles
> From: Joshua Alkire <jga05c@acu.edu>
> Date: Sat, 13 Mar 2010 14:17:04 -0600
>
> Oops! One last question. How portable is a batch of mead while it is
> fermenting? I am a student currently living in a duplex, but this
> summer, I
> will be moving back to my parent's house (only 10 min. away) and
> then moving
> to a new apartment in the fall. The initial fermentation stage
> should be
> done by the time I move it, and I am only looking to make two 1-gallon
> batches, so it's not like I'm lugging around a huge 5-gallon carboy
> in a
> trailer. But I still wonder: would the vibrations of my car upset the
> fermentation of these two gallons of mead during transport?
------------------------------
End of Mead Lover's Digest #1464
*******************************