Mead Lovers Digest #1254

Published in

· 7 months ago

Subject: Mead Lover's Digest #1254, 20 March 2006 
From: mead-request@talisman.com 

Mead Lover's Digest #1254                                  20 March 2006 

            Forum for Discussion of Mead Making and Consuming 
                      Dick Dunn, Digest Janitor 

Contents: 
  re: Seattle (Spike) 
  Re: Seattle Area (Eric Drake) 
  Mead progress ("P&J") 

NOTE: Digest appears when there is enough material to send one. 
Send ONLY articles for the digest to mead@talisman.com. 
Use mead-request@talisman.com for [un]subscribe/admin requests. 
Digest archives and FAQ are available at www.talisman.com/mead 
A searchable archive is available at www.gotmead.com/mead-research/mld 
---------------------------------------------------------------------- 

Subject: re: Seattle 
From: Spike <spikedmead@gmail.com> 
Date: Mon, 13 Mar 2006 07:42:59 -0800 

I am in Seattle, moving up to Everett next week though. 

Ambrosia is made down in the Tacoma area..  That is a pretty good local 
mead... 

Spike 

Subject: Re: Seattle Area 
> From: "Erroll Ozgencil" <errollo@gmail.com> 
> Date: Wed, 8 Mar 2006 10:40:23 -0800 
> 
> > Just out of curiosity, I was wondering if any of you guys live near 
> > Seattle, WA? We have lots of micro-brew but not a lot of good mead. 
> > 
> > Robert 

------------------------------ 

Subject: Re: Seattle Area 
From: Eric Drake <drake.49@osu.edu> 
Date: Mon, 13 Mar 2006 11:04:35 -0500 

At 10:32 AM 3/13/2006, you wrote: 
>Two hours to the North, 30 miles due east of Bellingham near Mt. Baker. 
>http://www.brownsnout.com 
> 
>We will be doing Mead as well as our Cider 
>(still waiting on Federal permit -- have the State) 
>Dave 

Hey Dave, our curiosity, I thought that ciders and meads were both  
made under a federal winery permit, so if you already have the cider  
permit, what other federal permit would you need?  Unless you are  
talking label approval? 

Thanks, 
Eric 

------------------------------ 

Subject: Mead progress 
From: "P&J" <eala@cecomet.net> 
Date: Sat, 18 Mar 2006 21:57:46 -0500 

Okay...so we started our Mead in August. A month ago, we siphoned it off 
(for about the 3rd time, I think) from 1 carboy to another. The stuff on the 
bottom was amazing-just all of a sudden one day, there was about an inch of 
sediment. Now we have this carboy with no schmutz in it at all. My hubby 
thinks we can bottle it now, as it seems to be still. I told him if we do, 
it's going in the cellar so in case we have an explosion it'll go down the 
floor drain....what do folks think? 
Paula 

------------------------------ 

End of Mead Lover's Digest #1254 
*******************************