Copy Link
Add to Bookmark
Report
Mead Lovers Digest #0733
Subject: Mead Lover's Digest #733, 4 April 1999
From: mead-request@talisman.com
Mead Lover's Digest #733 4 April 1999
Forum for Discussion of Mead Making and Consuming
Dick Dunn, Digest Janitor
Contents:
RE: Mead Lover's Digest #732, 27 March 1999 ("DENNIS KEY, RN, PACU (RECOVE...)
RE: Mead Lover's Digest #732, 27 March 1999 ("DENNIS KEY, RN, PACU (RECOVE...)
Oak ("Jake Hester")
gypsum ("Jake Hester")
NOTE: Digest only appears when there is enough material to send one.
Send ONLY articles for the digest to mead@talisman.com.
Use mead-request@talisman.com for [un]subscribe/admin requests. When
subscribing, please include name and email address in body of message.
Digest archives and FAQ are available for anonymous ftp at ftp.stanford.edu
in pub/clubs/homebrew/mead.
----------------------------------------------------------------------
Subject: RE: Mead Lover's Digest #732, 27 March 1999
From: "DENNIS KEY, RN, PACU (RECOVERY ROOM) 272-2720" <DKEY@mozart.unm.edu>
Date: Mon, 29 Mar 1999 12:22:06 -0700
VANILLA MEAD:
I made a six-gallon batch which came out very well. I chopped up one valilla
bean and soaked it in enough vodka to cover for 48 hours then strained it into
the must which had been fermenting for a couple of days. Two weeks later I
added another bean as before. It has a nice vanilla taste and aroma and I
intend to repeat the recipe--perhaps adding some frozen and thawed cherries.
As Long As There's Mead, You Will Never Thirst!
Dennis
------------------------------
Subject: RE: Mead Lover's Digest #732, 27 March 1999
From: "DENNIS KEY, RN, PACU (RECOVERY ROOM) 272-2720" <DKEY@mozart.unm.edu>
Date: Mon, 29 Mar 1999 12:38:14 -0700
Sulfur taste/smell
I'm not sure of the equivelents, but (according to label instructions) but I
use 1/4 tsp of bulk bisodium sulfite per 5-7 gallons of must. I have never had
any problems with contamination. I add another 1/4 tsp at the final racking to
prevent too much oxidation.
I did make a mango melomel once, however, that had a distinctive sulfur
character. As noted in another post, it goes away with sufficient aging.
Dennis
------------------------------
Subject: Oak
From: "Jake Hester" <jake_hester@hotmail.com>
Date: Thu, 01 Apr 1999 07:32:45 PST
Has anyone had any experience with aging in oak barrels, or in using oak
chips or oak essence? I was thinking it'd be nice to get some oaky
notes into my mead, but am not sure what the best way to go about it.
Can anyone give me any hints, and/or the advantages of each of the
above? Thanks!
------------------------------
Subject: gypsum
From: "Jake Hester" <jake_hester@hotmail.com>
Date: Thu, 01 Apr 1999 07:34:24 PST
What is the purpose of using gypsum in mead? I've seen several recipes
that called for it, but I can't seem to find any reason behind it.
Thanks in advance!
------------------------------
End of Mead Lover's Digest #733
*******************************
