Copy Link
Add to Bookmark
Report

Mead Lovers Digest #0418

eZine's profile picture
Published in 
Mead Lovers Digest
 · 7 months ago

Subject: Mead Lover's Digest #418, 11 July 1995 
From: mead-request@talisman.com


Mead Lover's Digest #418 11 July 1995

Forum for Discussion of Mead Making and Consuming
Dick Dunn, Digest Janitor

Contents:
yeast nutrients and acids (Lenny Garfinkel)
young or bad mead? (Gordon L. Olson)
Suggestion (Russell Mast)
slow mead clearing (Chuck Wettergreen)
recipe request (Sylverre Polhemus)

NOTE: Digest only appears when there is enough material to send one.
Send ONLY articles for the digest to mead@talisman.com.
Use mead-request@talisman.com for [un]subscribe/admin requests. When
subscribing, please include name and email address in body of message.
Digest archives and FAQ are available for anonymous ftp at ftp.stanford.edu
in pub/clubs/homebrew/mead.
----------------------------------------------------------------------

Subject: yeast nutrients and acids
From: Lenny Garfinkel <lenny@zeus.datasrv.co.il>
Date: Wed, 5 Jul 1995 08:02:15 +0300 (IDT)

I want to make my first mead after several batches of beer and cider. I
have read the faqs, as well as the article about mead in Zymurgy (Spring,
1995). I need some help with addition of nutrients and acids.

Many of the recipes for simple mead recommend addition of yeast energizer
and nutrient, as well as acid blend. I don't have access to either of
these here in Israel. One reference mentioned addition of malic and
tartaric acids, but the amounts were in milliliters, and therefore dealt
with some solution of unspecified concentration. I have access to Difco
Yeast Nitrogen Base, with and without ammonium sulfate, as well as
crystalline citric, malic, and tartaric acid. Could someone recommend
amounts of these compounds for a 5 gallon batch. Thanks.

Lenny Garfinkel

_________________________________________________________________
Dr. Leonard Garfinkel | Internet: lenny@zeus.datasrv.co.il
Bio-Technology General | Office Phone: 972-8-381256
Kiryat Weizmann | Home Phone: 972-8-451505
Rehovot, Israel | FAX: 972-8-409041
- -----------------------------------------------------------------

------------------------------

Subject: young or bad mead?
From: glo@lanl.gov (Gordon L. Olson)
Date: Wed, 5 Jul 1995 09:34:27 -0600

In MLD #417, Warren A. Ransom writes:

>i just tasted a mead that has been fermenting for a while, and it kind of
>tastes more like mouthwash than what i heard it would. perhaps i should
>give some background...
- snip the rest -

Information about the yeast that you used and the final gravity is very
important in trying to diagnose what is happening. Some yeasts ferment
cleaner and mellow out faster than others. If you have a very dry mead,
SG < 1.000, it can taste very harsh if you used lots of ginger. I hope
that you used fresh ginger root and not powdered ginger, that also makes
a big difference.

When I was first learning to brew beer, someone brought some Barshak
Ginger Mead to a party. I tried it and thought that it was horrible.
It was alcoholic hot, dry, and very bitter to my naive taste buds.
This turned me off to meads so that I didn't make one of my own until
more than 5 years later. Such a fool I was. Now I realize that I don't
care for very dry meads, I want some honey sweetness that I can taste.

My advice: do not dump it out! Be patient and let it age some more.
Continue sampling it once a month until you find it drinkable.

Next time aim for a still, medium sweet mead, 1.010 < SG < 1.020. This
range of sweetness is the easiest for most people to drink.

Gordon

------------------------------

Subject: Suggestion
From: Russell Mast <rmast@fnbc.com>
Date: Wed, 5 Jul 1995 10:48:16 -0500


> Subject: Did i do something super bad to my mead?
> From: "Warren A. Ransom III" <war@quanta.com>

> does anyone have any suggestions?

Patience. Give it another year.

- -R

------------------------------

Subject: slow mead clearing
From: chuckmw@mcs.com (Chuck Wettergreen)
Date: Thu, 6 Jul 1995 08:40:54 -0500

In MLD #417 rcd@raven.eklektix.com (Dick Dunn), wrote the following in
answer to a question about why meads take a long time to clear:

>In my experience, they don't take all that long. I've had some laggards,
>but mostly they're pretty quick if the acid and nutrients are right.

Do you mean that you test/adjust the must Ph prior to pitching your yeast,
or are you testing/adjusting Ph on-the-fly, ie. after the yeast has dropped
the Ph? In Dan McConnell's and ? mead article in Zymurgy, they suggest
fermenting without adding acid in the beginning, rather waiting until
fermentation is complete and then adjusting with acid to taste Any comments?.

also, I see occasional references to the use of pectic enzyme with fruit to
improve clarity. Would anyone care to comment as to the proper uses of this
enzyme, it's benefits and drawbacks. Also, which fruits it should be used with.

TIA,
Chuck
/*/*/*/*/*/*/*/*/*/*/*/*/*
Chuck Wettergreen
chuckmw@mcs.com
Geneva, Il
/*/*/*/*/*/*/*/*/*/*/*/*/*

------------------------------

Subject: recipe request
From: Sylverre Polhemus <sylverre@tyche.lib.utexas.edu>
Date: Tue, 11 Jul 1995 18:38:35 -0500 (CDT)

To the collective wisdom of meadmakers:
I am planning on a marathon brewing session sometime in the near future,
(five or six separate meads) so here's my request:
send me your favorite mead/melomel/metheglin recipe using sweet mead yeast.
Private e-mail please; results will be posted if desired.
TIA, Sylverre
sylverre@tyche.lib.utexas.edu

God gave us yeast that we might discover some of what He goes through.

------------------------------

End of Mead Lover's Digest #418
*******************************

← previous
next →
loading
sending ...
New to Neperos ? Sign Up for free
download Neperos App from Google Play
install Neperos as PWA

Let's discover also

Recent Articles

Recent Comments

guest's profile picture
@guest
10 Nov 2024
الاسم : جابر حسين الناصح - السن :٤٢سنه - الموقف من التجنيد : ادي الخدمه - خبره عشرين سنه منهم عشر سنوات في كبرى الشركات بالسعوديه وعشر سنوات ...

lostcivilizations's profile picture
Lost Civilizations (@lostcivilizations)
6 Nov 2024
Thank you! I've corrected the date in the article. However, some websites list January 1980 as the date of death.

guest's profile picture
@guest
5 Nov 2024
Crespi died i april 1982, not january 1980.

guest's profile picture
@guest
4 Nov 2024
In 1955, the explorer Thor Heyerdahl managed to erect a Moai in eighteen days, with the help of twelve natives and using only logs and stone ...

guest's profile picture
@guest
4 Nov 2024
For what unknown reason did our distant ancestors dot much of the surface of the then-known lands with those large stones? Why are such cons ...

guest's profile picture
@guest
4 Nov 2024
The real pyramid mania exploded in 1830. A certain John Taylor, who had never visited them but relied on some measurements made by Colonel H ...

guest's profile picture
@guest
4 Nov 2024
Even with all the modern technologies available to us, structures like the Great Pyramid of Cheops could only be built today with immense di ...

lostcivilizations's profile picture
Lost Civilizations (@lostcivilizations)
2 Nov 2024
In Sardinia, there is a legend known as the Legend of Tirrenide. Thousands of years ago, there was a continent called Tirrenide. It was a l ...

guest's profile picture
@guest
2 Nov 2024
What is certain is that the first Greek geographer to clearly place the Pillars of Hercules at Gibraltar was Eratosthenes (who lived between ...

guest's profile picture
@guest
1 Nov 2024
Disquieting thc drinks has been quite the journey. As someone keen on unpretentious remedies, delving into the in every respect of hemp has ...
Neperos cookies
This website uses cookies to store your preferences and improve the service. Cookies authorization will allow me and / or my partners to process personal data such as browsing behaviour.

By pressing OK you agree to the Terms of Service and acknowledge the Privacy Policy

By pressing REJECT you will be able to continue to use Neperos (like read articles or write comments) but some important cookies will not be set. This may affect certain features and functions of the platform.
OK
REJECT