Copy Link
Add to Bookmark
Report
Mead Lovers Digest #0287
Subject: Mead Lover's Digest #287, 4 April 1994
From: mead-lovers-request@eklektix.com
Mead Lover's Digest #287 4 April 1994
Forum for Discussion of Mead Making and Consuming
Dick Dunn, Digest Coordinator
Contents:
Mixing honey (John Gorman)
Send ONLY articles for the digest to mead-lovers@eklektix.com.
Use mead-lovers-request@eklektix.com for subscribe, unsubscribe, and admin
requests. When subscribing, please include your name and a good address
in the message body unless you're sure your mailer generates them.
There is an FTP archive of the digest on sierra.stanford.edu in pub/mead.
If you have email access but not ftp, it will accept "listserv" requests.
Send email with message "help" to listserv@sierra.stanford.edu.
------------------------------
Subject: Mixing honey
From: john@rsi.com (John Gorman)
Date: Fri, 1 Apr 1994 11:25:33 EST
> The only drawback so far was that I got pretty burned out agitating a 5
> gallon carboy to mix the honey and water - I figure I got excellent aeration
> though.
If your sink has a spray attachment, use it to make aerated water
for mixing with the honey.
I mix my honey with a gallon or two of warm tap water in my
bottling bucket with a slotted spoon or spatula. Just takes a
minute or two. Then I pour the mixture into the 5 gallon carboy and
top off with cold water, yeast and nutrient, plus any fruit.
For a final mix before plugging the carboy, insert your J tube (or
other long stiff member) into the carboy and rotate the free end
horizontally. This produces a satisfying 'tornado' effect in the
carboy and eliminates any remaining gravity or temperature gradients.
- john
John Gorman john@rsi.com
Relational Semantics, Inc. 617-926-0979
17 Mount Auburn Street Watertown MA 02172 USA
------------------------------
End of Mead Lover's Digest #287
