Copy Link
Add to Bookmark
Report
Mead Lovers Digest #0184
Mead Lover's Digest #184 Sun 01 August 1993
Forum for Discussion of Mead Brewing and Consuming
John Dilley, Digest Coordinator
Contents:
Re: Labels & Glue (Dave Beedle)
Re: Mead Lover's Digest #183 (July 31, 1993) (Matthew D Kirkwood)
Re: Labels & Glue (Devan DzM MacFarlane)
Labels & Glue (parsons1)
Send articles for submission to the digest to mead-lovers@nsa.hp.com
Send digest subscribe, unsubscribe, or any other administrative requests to
mead-lovers-request@nsa.hp.com
NOTE: There is now an MLD FTP archive on sierra.stanford.edu in pub/mead
----------------------------------------------------------------------
Date: Sat, 31 Jul 1993 08:50:01 +22306512 (CDT)
From: dbeedle@rs6000.cmp.ilstu.edu (Dave Beedle)
Subject: Re: Labels & Glue
In a recent message ALCHEMEDIA@delphi.com wrote:
>
> I've redesigned new labels and have them on cool paperstock. Now
> I just need to figure out what kind of adhesive to use. Any
> suggestions? I'd prefer something dispensed via roller instead
> of spray or brush, but at this point I'll take anything.
A question I can answer! I use a glue stick. Easy to use plus it's water
soluble, dip the empty bottle in water and a minute later the lable falls right
off! I've also heard of folks using milk! Put enough milk in a saucer so that
the back of a lable can be wetted and stick it to the bottle. The lable fall
right off when the time comes with this method. I don't do this though since
the ink on some of my lables can run.
TTFN
- --
Dave Beedle - dbeedle@rs6000.cmp.ilstu.edu - Network Services
136A Julian Hall
"The toque is to keep the head warm in the winter Phone: 8-3611
and your beer cold in the summer" - The McKenzie Brothers
------------------------------
Date: Sat, 31 Jul 1993 13:44:50 -0500
From: Matthew D Kirkwood <mdkirkwood@mmm.com>
Subject: Re: Mead Lover's Digest #183 (July 31, 1993)
D. Crafts Asks...
>I've redesigned new labels and have them on cool paperstock. Now
>I just need to figure out what kind of adhesive to use. Any
>suggestions? I'd prefer something dispensed via roller instead
>of spray or brush, but at this point I'll take anything.
I've used rubber cement and glue sticks with reasonable success. Both hold
well and are easy to remove. Glue sticks (like Uhu brand) come off with
warm water and if carefully applied will hold labels well. Rubber cement
holds stronger, but is harder to remove.
I am also planning to experiment with 3M Photo Mount spray or similar spray
products. They will be easy to apply (especially for 50 beer bottles) and
hold strongly, but probably will require alcohol or a similar chemical to
remove.
-Matt Kirkwood (mdkirkwood@mmm.com)
------------------------------
Date: Sat, 31 Jul 93 14:50:11 PDT
From: zoetrope@netcom.com (Devan DzM MacFarlane)
Subject: Re: Labels & Glue
> From: ALCHEMEDIA@delphi.com
> I just need to figure out what kind of adhesive to use. Any
> suggestions? I'd prefer something dispensed via roller instead
> of spray or brush, but at this point I'll take anything.
I've never really given this much thought before ... Something that might
work well would be a "waxer". A waxer is a tool that production artists
(sometimes known as "strippers") used to use for preparing camera ready
artwork for newspapers and magazines. The basic premis is wax is melted
onto a roller and this is smeared on the back of the "thing to be stuck"
(lables or galleys).
I suppose there's also the ever-popular option of "paste" (you know the
stuff--every first-grade student on the planet eats it). As I recall this
glop is water soluble...
- --
DzM | Did you keep a watch for the dead man's wind
1455 Bellomy St, #B | Did you see the woman with the comb in her hand
Santa Clara, CA 95050 | Wailing away on the wall on the strand
| As you danced to the Turkish song of the damned
zoetrope@netcom.com -- The Pogues, Turkish Song of the Damned
------------------------------
Date: Sat, 31 Jul 93 17:52:49 -0400
From: parsons1@husc.harvard.edu
Subject: Labels & Glue
In response to D Crafts' question:
I laserprint all my labels on plain stock. I have experimented with
various glues and mucilage, but have found that milk works best.
Float the label in a bowl of milk to cover the back of the label with
it, and then just stick to the bottle. No mess; stays on fine; easy to
get off; no slimy residue.
Jed parsons1@husc8.harvard.edu
------------------------------
End of Mead Lover's Digest
************************
