Dr. Badmind's chemistry files #6
File #6 Makes
- Light bulb bomb
- Lighter bomb
- Molotov Cocktain
- Pipe Bomb
We are now beginning to get into some highly dangerous things.
Be safe.
Light Bulb Bomb
Get a normal light. And using a lighter or blow torch. Heat the metal part of the bulb. It'll start to come lose and then you can take it off. After having the metal part of the light bulb off, Put some type of fast burning powder in the glass part. Now, This is the hard part. Try put the metal part back with out damaging the glass. Then put glue around it so the metal part won't come off. Heat it a little bit so the metal melts back on the light. Now you have made a neat bomb. Place it somewhere to cool down. To work it, Put it in the circuit and make sure the electric charge isn't running though it. Now wait till some idiot turns it on and POW!, It may not do a explosion like you'd see on TV, But it will be weird and funny.
Lighter Bomb
Lighter bombs a quite easy to make. Just get about 4 lighters, and some lighter fluid or solvent coment. And tape the 4 lighters together. Not to fancy though. Then there's a choice. Through it. Sometimes it'll work. You'll be lucky if it does or just pour either the fluid or solvent coment on it. It'll burn a while and explode. Pretty neat. Some times they pop and the gas shots up in the air and then burns up. A flame once shot 4 feet light.
Molotov Cocktain
This is a simple device that anyone can make. Simply get a bottle and fill it with a highly flammable liquid. Gas, Turpentine, Lighter Fluid. Then did a rage in Solvent and let it dry. Then again dip it into the solvent coment for using. Then cork the bottle with the rag and light the rag and throw it. Try filling the bottle with Solvent coment and using the same type rag. It'll do a all different thing.
Pipe Bomb
A pipe bomb is quite simple to make though there's problems with it. Plastic or metal you can use. Though pipe bombs tend to be the most backfiring explosive from Nitroglyerin. Follow the steps.
- Get the most fast burning powder.
- Get 3 inch wide and 12 inch long pipe (Plastic or Metal)
- Follow the diagram.
[[[[]]]-]------cork
[[[[]]]]]
[oooooo ]
[ooooooo]
[ooooooo---- Hole with Wick
[ooooooo]
[ooooooo]
[ooooo-o]------Fast Burning Powder
[ooooooo]
[ooooooo]
[ooooooo]
[ooooooo]
[ooooooo]
[ooooooo]
[ooooooo]
[ooooooo]
[[[[]]]]]
[[[[]]]-]--Cork
[[[[]]]]]Following this diagram, It's very strait forward. Make the Corks on each end of the pipe very strong and best to hammer each side in after finished. put tissue on one end where the last hammering will be so it won't ignite the fast burning powder.
============
See ya
============
You can find me by leaving mail to Clarence Bodicker at Thrasher BBS
(415)822-5630
Remember... Really Anarchists can't spell
