Copy Link
Add to Bookmark
Report
Making a Bleem! Disk (Bleemed ISO)
1. Download the selfboot script.
Bleem!cast Selfboot Script - OVERRIDE
http://www.megaupload.com/?d=ZCAS515D
2. Download ASPI .
ForceASPI
http://www.radified.com/ASPI/forceaspi.htm
3. Download Alcohol 120 trial.
Alcohol 120
http://www.alcohol-soft.com
Script Nfo:
- Install ASPI, and Alcohol 120% Trial (http://www.alcohol-soft.com)
- Make disc image of the game you're wanting to selfboot (Using Alcohol 120%)
- Burn disc image to CDR, using 4x. Tick: "Don't close the last session of current disc"
- Right, now to the selfboot script. Open \bleem\ locate "Scanbus.bat" run it
- Note your DVD/CD-RW drive's ID (eg 1,0,0)
- Right click "Edit" "script.bat", edit these 3 things:
- set scsi_id= x,x,x <--- your Drive's ID, obtained in scanbus
- set speed= x <--- your burner's lowest CDR burning speed
- set gamename= xxxxxxx <--- whatever you want to label the disc's "volume label"
- Once it pops out you're done. Enjoy
Notes:
the bleem script is simple and you can also use alcohol 120 trial.
make sure you do not close last session of disk!!
one note about psx isos. be sure you make a correct .cue sheet it should look like this:
FILE "GallopRacer.bin" BINARY
TRACK 01 MODE2/2352
INDEX 01 00:00:00
so once you make a working bleem disk, then u make an image of that disk. i prefer using padus diskjuggler to make an image to .cdi.