USR Code v1.0 Manual
USR Code v1.0 Manual
====================
How to use USRCODE v1.0 - Simply it goes like this. You need an US Robotics compatible HST with the AT%T command, and then you call USRCODE from a batch file like this:
USRCODE 1234
That would leave you with 1234# as the code, all codes ends with #, so the computer knows how long your pw is. You can have up to 64 digits long pass- words!!! After the pw is entered, the program will either hangup the user or send carrier and connect with the user. The program will then exit with an errorlevel equal to speed/100, so 14400 or 9600 would report as error- level 96. (For compatibility with QBBS and such programs). Users who call boards with USRCODE must dial like this:
ATX3DT <number>@<code>#
This means: ATX3DT and then the number, @ wait for answer, then send code followed by a #. It will then connect automatically if the code was good. Press <ESC> to quit to the desktop (exit with errorlevel 0), F1-F10 will exit with errorlevels 10-100, so you can use them for different applications like the usereditor, local logon and such stuff. If you miss something, leave a letter with your suggestions at any board where you find me..... Simple, isn't it??? I think so. Anyway, this is shareware, and if you like it, I'd be very happy if you sent me 100 Skr or so, the address is below:
Beeblebrox Industries Unlimited
c/o Carl Andersson
Liggargatan 5J
754 20 Uppsala
Sweden
The # to my BBS is +46-18-262804 (Eagles Nest BBS, 300-14400 HST). I am not using USRCODE yet, but I will soon. You'll get the pw's if you're elite enough............
Greetz, Zaphod Beeblebrox/ONC/TSC a.k.a Carl Andersson