SANctuary: Lightbulb Bombs

Published in

· 4 years ago

  
            SANctuary 
          * Presents * 

 :----------------------------------: 
 :         Lightbulb Bombs          : 
 :----------------------------------: 

         November 15, 1991 

 
            Written by: 
  --==**[ The Road Warrior ]**==--

Well, this is the first phile I've written for SANctuary, and since I've written so damn many t-philes, this is the only thing I could think of that I hadn't told anyone about, so here it is:

OVERVIEW

This phile deals with making a light bulb explosive. They are very effective anti-personnel devices. Or if you're just pissed off at somebody and want to ruin their day... this is the way to do it.

ALWAYS be careful when working with explosives and don't be a dumb shit and smoke around your work. I know most people know this, but there are a few lame fucks with the IQ of sewer water out there, and they may just be dumb enough to do it.

MATERIALS

In order to construct a light bulb explosive, you will need:

1 100 watt light bulb.
50 ml of unleaded gasoline.
1 Dremel minidrill or equivalent.
1 VERY small bit.
1 Hypodermic needle (unused).
1 Soldering Iron and Solder.

CONSTRUCTION

Ok, now the fun stuff. Stake out your victim's house, (I'm not gonna go into detail on how to do that. If you don't know how to case a joint, quit reading this!) Find out his schedule and when he's not at home.

Take your light bulb and look at the part that screws into the socket. Find the little blob of solder on the bottom. Now grab your Dremel and drill a tiny little hole into the bottom of the bulb where the solder is. MAKE SURE you do not damage the filiments inside the bulb, or it won't work. Now take your hypo and fill it with the gas. Insert it into the little hole in the bulb and continue this until the bulb is completely full of gas. (Should weigh about a pound). Wipe off the bulb REALLY good, and set it somewhere to dry the outside in case some spilled. After it is dry, (This is the dangerous part, heh heh) take your soldering iron and hold it above the hole in the light bulb. Touch a length of solder to the iron and let one small drop fall onto the hole, sealing it up.

USE

Now go to the fuckhead's house, and switch the bulb with the one in his living room, bathroom, etc. Or if ya really hate him, replace ALL of his light bulbs with loaded ones.

Note: This trick works with either upside down fixtures such as ceiling lights, preferably without globes on them that will deaden the blast, or table lamps or fixtures with the socket on the bottom, because of the little drop of solder that you used to seal it.

When the light switch is flipped, the electricity flowing through the bulb's filaments shorts out and sparks, thus causing a minor explosion. If you're lucky, the guy is standing close to the light and gets shards of glass, splashes of gas, and fire in his face. And if your REAL lucky, his house will burn down. Heh Heh.

Well that's all folks... short and sweet.
Look for more SANphiles from me real soon.
While you're at it call HELLFIRE BBS!!! SANctuary World HQ! at 908-495-3926. Also call My GREAT board The GLobal Intelligence Center! (412)475-4969. Tell 'em Red sent ya for Top Access!

L8r daze!

  
========================================================================== 

       Oi! -=Red=- here! SANctuary is getting bigger, and bigger! 
 Look for SANctuary Net on a Telegard BBS near you! Should be online  
in a week or so. We still need writers, so upload your stuff to 
 Hellfire, or GIC, and Havok and I like it, hell you're in! 

      Or, if you're Not a Phreak, or local to NJ or PA, Drop us 
    a line at the SANctuary Mail Bag! 
       SANctuary 
       PO BOX 286 
       Keansburg, NJ 
       07734 

              Please Dont send any more severed heads! 
               The last batch were plenty, now all we need is  
                 some money, and some more writers! 

          EAT THE RICH! 
=========================================================================