What to do to properly use a SEGA's Dreamcast in 2020
I would like to briefly describe my experience with the SEGA's Dreamcast.
I know quite well the SEGA Mega Drive as I used it a lot during my childhood, but unfortunately I got a Dreamcast very late, years after SEGA quitted the Hardware business and the Dreamcast ceased to exist.
When I purchased my first Dreamcast (used), I noticed that, unlike many other retro-consoles, the Dreamcast is a delicate console in terms of survivability.
I have noticed the following problems:
- The internal battery is usually dead or almost dead. Replace the battery is unfortunatly not an easy task, as it is soldered to the controller's motherboard. Furthermore it is a special battery, so as replacement you need to purchase online the exact same battery-model. The most annoying problem with a dead battery is that when you turn on the Dreamcast, a menu appears asking you to enter the current date.
- Furthermore the Dreamcast's memory card also contains a batterie, which like the internal battery over the course of a decade may stops to work. This is fortunately not a big problem as a dead battery does not affect the state of saves.
- The power supply is integrated inside the Dreamcast, so no external power-unit is needed. But there is a problem! The Dreamcast's power supply is a separate board connected to the main motherboard with a small connector. This connector may loose contacts and is the cause while the Dreamcast randomly reboot during playing a game. To solve the issue the Dreamcast has to be opened and the connector points of the connector need to be cleaned for better contact.
In the previous months I have published here many tutorials that explain how to solve all the described issues.
I hope you like!
Have fun with your Dreamcast :)
Comments