028 Exploding lightbulbs

eZine lover (@eZine)

Published in 

Jolly Rogers Cookbook Version

 · 4 years ago

  

Exploding lightbulbs                            by The Jolly Roger 

Materials needed: 

 -lightbulb (100w) 
 -socket (duh...) 
 -1/4 cup soap chips 
 -blackpowder! (open some shotgun shells!) 
 -1/4 cup kerosene orgasoline 
 -adhesive tape 
 -lighter or small blowtorch 
 -glue 

Procedure for a simple exploding lightbulb: 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 

 - Drill a small hole in the top of the bulb near the threads! 

 - Carefully pour the blackpowder into the hole. Use enough so  
that it touches the filament! 

 - Insert into socket as normal (make sure the light is off or  
else YOU will be the victim!!) 

 - Get the hell out!! 

Procedure for a Napam Bulb: 
~~~~~~~~~~~~~~~~~~~~~~~~~~~ 

 - Heat kerosene/gasoline in a double boiler 

 - Melt soap chips, stirring slowly. 

 - Put somewhere and allow to cool 

 - Heat the threads of the bulb VERY carefully to melt the glue.  
Remove threads, slowly drawing out the filament. Do NOT break the  
cheap electrical igniters and/or the filament or this won't work!! 

 - Pour the liquid into the bulb, and slowly lower the filament  
back down into the bulb. Make sure the filament is dipped into the  
fluid. 

 - Re-glue the threads back on. Insert it into a socket frequently  
used by the victim and get the hell out!! 

When the victim flips the switch, he will be in for a BIG surprise! 

Have fun!                              -Jolly Roger-