Copy Link
Add to Bookmark
Report
CERT Advisory 100
-----BEGIN PGP SIGNED MESSAGE-----
=============================================================================
CERT(sm) Advisory CA-95:13
Original issue date: October 19, 1995
Last revised: August 30, 1996
Information previously in the README was inserted
into the advisory.
A complete revision history is at the end of this file.
Topic: Syslog Vulnerability - A Workaround for Sendmail
- -----------------------------------------------------------------------------
The CERT Coordination Center has received reports of problems with the
syslog(3) subroutine. To the best of our current knowledge, the problem is
present in virtually all versions of the UNIX Operating System except the
following:
Sony's NEWS-OS 6.X
SunOS 5.5 (Solaris 2.5)
Linux with libc version 4.7.2, released May 1995
We have received reports indicating that the vulnerability is being exploited
with a script that has been written to be used with sendmail.
This advisory includes a workaround that you can use with sendmail. It
*does not* include workarounds for any other programs that use the syslog(3)
subroutine--telnetd, ftpd, httpd, etc.
The CERT Coordination Center recommends installing all appropriate
syslog-related patches as soon as they are available from vendors. But, in
the meantime, we suggest addressing at least the syslog problem in sendmail by
installing sendmail version 8.7.1. We are aware that several workarounds
concerning the syslog vulnerability have been published on the Internet, but
the CERT staff has not formally evaluated them.
We will update this advisory as we receive additional information.
Please check advisory files regularly for updates that relate to your site.
- -----------------------------------------------------------------------------
I. Description
The syslog(3) subroutine uses an internal buffer for building messages
that are sent to the syslogd(8) daemon. This subroutine does no range
checking on data stored in this buffer. It is possible to overflow the
internal buffer and rewrite the subroutine call stack. It is then
possible to execute arbitrary programs.
This problem is present in virtually all versions of the UNIX
Operating System except the following:
Sony's NEWS-OS 6.X
SunOS 5.5 (Solaris 2.5)
Linux with libc version 4.7.2 released in May, 1995
The sendmail(8) program uses the syslog(3) subroutine, and a script has
been written and is being used to exploit the vulnerability.
II. Impact
Local and remote users can execute commands. Prior access to the system
is not needed. Exploitation can lead to root access.
III. Solution
We recommend that you do all of A, B, and C.
A. Install syslog patches from your vendor when they become available.
Information we received from vendors as of the issue date of this
advisory is attached as Appendix A. We will update the appendix as
vendors send updated information.
When you install patches, you will need to recompile/relink any
programs built on your system that have been compiled without shared
libraries, that is, compiled statically. Be especially careful of
programs that contain their own versions of the syslog(3) subroutine.
You may need to do significant extra work to compile those programs to
use the vendor-supplied patches.
B. Install sendmail version 8.7.1.
NOTE: This workaround addresses the syslog(3) vulnerability in
sendmail only. The vulnerability still exists in all other
programs that use syslog(3).
When your vendor(s) provides a patch, we recommend that you rebuild
sendmail version 8.7.1 with the patched syslog(3) and place that
newly compiled version into service.
Sendmail is available by anonymous FTP from
ftp://info.cert.org/pub/tools/sendmail/
ftp://ftp.cs.berkeley.edu/ucb/sendmail/
ftp://ftp.auscert.org.au/pub/mirrors/ftp.cs.berkeley.edu/ucb/sendmail/
ftp://ftp.cert.dfn.de/pub/tools/net/sendmail/
Checksum:
MD5 (sendmail.8.7.1.tar.Z) = 4a66d07a059d1d5af5e9ea53ff1b396a
Depending upon your currently installed sendmail program, switching to
a different sendmail may require significant effort (such as rewriting
the sendmail.cf file). See Section VI for additional notes on
installation.
In addition, Sections IV and V below contain scripts for building
sendmail 8.7.1 for SunOS 4.1.X and Solaris 2.X, respectively.
C. Install smrsh.
To restrict the sendmail program mailer facility, install and
use the sendmail restricted shell program (smrsh). We recommend
that you do this regardless of whether you use the vendor's supplied
sendmail or you install sendmail version 8.7.1.
Smrsh is now included in the sendmail 8.7.1 distribution in the
subdirectory smrsh. See the RELEASE_NOTES file for a description
of how to integrate smrsh into your sendmail configuration file.
Please note that although smrsh does not address the vulnerability
described in this advisory, a description of smrsh is provided for
completeness. We recommend that you install and use smrsh with *all*
versions of sendmail.
IV. Building this package for SunOS 4.1.X
Here is a script that is given as an illustration of how to build
sendmail 8.7.1 for SunOS 4.1.X. Please refer to READ_ME in the src
subdirectory for a more complete explanation of other options available
during the compilation process.
% uname -sr
SunOS 4.1.2
% ls
sendmail.8.7.1.tar.Z
% zcat sendmail.8.7.1.tar.Z | tar xf -
% cd sendmail-8.7.1/src
% ./makesendmail LIBS='-lresolv' DBMDEF='-DNDBM -DNIS' \
INCDIRS= LIBDIRS= sendmail
Configuration: os=SunOS, rel=4.1.2, rbase=4, arch=sun4, sfx=
Creating obj.SunOS.4.1.2.sun4 using Makefile.SunOS
Making dependencies in obj.SunOS.4.1.2.sun4
Making in obj.SunOS.4.1.2.sun4
...
See Section VI for final installation steps.
V. Building this package for Solaris 2.X
Here is a typescript that is given as an illustration for how to build
sendmail 8.7.1 for Solaris 2.X. Note that this procedure assumes that
you have the GNU gcc system. The examples below used gcc version 2.6.3.
Again, please refer to READ_ME in the src sub-directory for a more
complete explanation of other options available during the compilation
process.
% uname -sr
SunOS 5.4
% ls
sendmail.8.7.1.tar.Z
% zcat sendmail.8.7.1.tar.Z | tar xf -
% cd sendmail-8.7.1/src
% ./makesendmail LIBS='-lresolv -lsocket -lnsl -lelf' \
INCDIRS= LIBDIRS= sendmail
Configuration: os=SunOS, rel=5.4, rbase=5, arch=sun4, sfx=
Creating obj.SunOS.5.4.sun4 using Makefile.SunOS.5.4
Making dependencies in obj.SunOS.5.4.sun4
...
Note: If you wish sendmail version 8.7.1 to use the aliases and
configuration file directory conventions from SunOS 5.4, use the
following command:
./makesendmail LIBS='-lresolv -lsocket -lnsl -lelf' \
ENVDEF='-DSOLARIS=204 -DUSE_VENDOR_CF_PATH' INCDIRS= \
LIBDIRS= sendmail
VI. Final Installation Notes
Sendmail can then be installed and configured with new configuration
files as needed. We strongly recommend that if you change to sendmail
8.7.1, you also change to the configuration files that are provided with
that version.
Significant work has been done to make this task easier. It is now
possible to build a sendmail configuration file (sendmail.cf) using
the configuration files provided with this release. Consult the
cf/READ_ME file for a more complete explanation. We recommended that you
create your configuration files using this method because it provides a
technique for incorporating any future changes to sendmail into your
configuration files.
In addition, we recommend that you recreate your configuration file
(sendmail.cf) using the configuration files provided with 8.7.1.
Finally, for Sun users, a paper is available to help you convert your
sendmail configuration files from the Sun version of sendmail to one that
works with version 8.7.1. The paper is entitled "Converting Standard Sun
Config Files to Sendmail Version 8" and was written by Rick McCarty of
Texas Instruments Inc. It is included in the distribution and is located
in contrib/converting.sun.configs.
^L
..............................................................................
Appendix A: Vendor Information
Below is information we have received from vendors concerning the
vulnerability described in this advisory. If you do not see your vendor's
name, please contact the vendor directly for information.
In addition to vendor information, note that the freely available Linux with
libc version 4.7.2, released May 1995, is not vulnerable.
- --------------------
Eric Allman
Neither sendmail version 8.7.3 nor 8.7.1 is vulnerable. Sendmail is
available by anonymous FTP from
ftp://info.cert.org/pub/tools/sendmail
ftp://ftp.cs.berkeley.edu/ucb/sendmail
ftp://ftp.auscert.org.au/pub/mirrors/ftp.cs.berkeley.edu/ucb/sendmail
ftp://ftp.cert.dfn.de/pub/tools/net/sendmail
MD5 (sendmail.8.7.3.tar.Z) = 3c3891c92500d12d60a61aaa1d01b533
- --------------------
Berkeley Software Design, Inc.
Users of BSD/OS V2.0 and V2.0.1 by Berkeley Software Design, Inc. should
install patch U201-001 which works for both versions. The patch is available
to all BSDI customers in: ftp://ftp.bsdi.com/bsdi/patches/
md5 checksum: 88b3fd8c83a5926589d7b87b55bc4e14
- --------------------
Convex Computer Corporation
The CERT Coordination Center inadvertently omitted the Convex entry
from the original advisory:
Vulnerable: ConvexOS (all releases)
SPPUX (all releases)
A patch is being developed to address this vulnerability in currently
supported releases as detailed below. Contact the Convex Technical
Assistance Center 1-800-952-0379 to obtain information and patches.
There are no known automated attack programs in existence for Convex or
SPP architectures. Development of such a program would require access
to such a machine, as well as detailed knowledge of the architecture.
However, the only completely secure work-around at this time would be to
disable sendmail (known to have been successfully attacked on other
architectures), as well as other daemons which can potentially log
user-supplied strings. Note that the user-supplied strings do not have
to actually be routed by syslogd in order for this vulnerability to
occur. At this time we do not have a canonical list of affected
software; sendmail is the only known-vulnerable agent.
It should also be noted that Convex machines make use of a "SPU"
workstation (also referred to as a "test station") which controls the
machine; these workstations are vulnerable if sendmail is enabled on
those workstations and the SPU or test station is located on an
accessible network. Convex recommends disabling sendmail on SPU and
test-station workstations until a patch can be obtained from Convex.
Currently supported OS releases as of Sep 1, 1995:
ConvexOS 10.1, 10.2, 11.0, 11.1
SPPUX 3.x
- --------------------
Cray Research
Information about fixes for the syslog problem can be found in FN #2011,
dated October 10, 1995. Customers should receive this information from
their Cray Research service representative.
For all source installations, your Cray Research service representative can
obtain the fix via the getfix tool.
Due to the number of executables which use this library routine, it is not
possible to provide getfix packages for all binary installations. UNICOS
binary update packages 8.0.4.2 and 9.0.1.2 include this mod.
FIX AVAILABILITY as of Feb. 1996
--------------------------------
Release Level Fix Package
Affected Product Containing Fix Availability
================ ============== ===========
UNICOS 8.0 UNICOS 8.0.4.2 * source only
UNICOS 8.3 ** source only
UNICOS 9.0 UNICOS 9.0.1.2 *** source only
* Released for all platforms.
** No more updates planned.
*** Released for X-MP, Y-MP, C-90 and T-90 platforms but has not yet
released for YMP-EL and J-90 platforms.
- --------------------
Data General Corporation
The DG/UX operating system is NOT vulnerable to this problem. This
includes all currently supported release, DG/UX 5.4 Release 3.00, DG/UX 5.4
Release 3.10, DG/UX Release 4.10 and all related Trusted DG/UX products.
- --------------------
Digital Equipment Corporation
For updated information, please refer to the Digital Equipment
Corporation Vendor Bulletin #96.0383, available in
ftp://info.cert.org/pub/vendors/dec/dec_96.0383
Note: Non-contract/non-warranty customers should contact
local Digital support channels for information
regarding these kits.
As always, Digital urges you to periodically review your system
management and security procedures. Digital will continue to review
and enhance the security features of its products and work with
customers to maintain and improve the security and integrity of their
systems.
- --------------------
Hewlett-Packard Company
Included below is information obtained from the February 7th, 1996,
Hewlett Packard Security Bulletin, HPSBUX9602-029 "Security
Vulnerability in HP-UX syslog(3) subroutine."
It has been found that all HP-UX systems prior to HP-UX 10.10 have
this vulnerability.
The vulnerability can be eliminated from releases 9.X and 10.0X of
HP-UX by applying a patch. Releases of HP-UX prior to 9.X must
upgraded to release 9.X or higher to escape the vulnerability,
which is fixed in the HP-UX 10.10 release. There are no work-around
solutions known.
Hewlett-Packard recommends that all customers concerned with the
security of their HP-UX systems either apply the appropriate
patch or change perform the actions described above as soon as
possible.
Hewlett Packard's HP-UX patches are available via email
and World Wide Web.
To obtain a copy of the HP SupportLine email service user's
guide, send the following in the TEXT PORTION OF THE MESSAGE to
support@us.external.hp.com (no Subject is required):
send guide
The users guide explains the process for downloading HP-UX
patches via email and other services available.
World Wide Web service for downloading of patches
is available via our URL:
(http://us.external.hp.com)
Patches:
PHCO_6595 (series 700/800, HP-UX 10.0 & 10.01), or
PHCO_6598 (series 800, HP-UX 9.0 & 9.04), or
PHCO_6597 (series 700, HP-UX 9.0[1357]), or
PHCO_6224 (series 300/400, HP-UX 9.0, 9.01, 9.03 & 9.1), or
PHCO_6162 (series 700, HP-UX 9.08 BLS), or
PHCO_6161 (series 700, HP-UX 9.09 BLS), or
PHCO_6160 (series 700, HP-UX 9.09+ BLS), or
PHCO_6157 (series 700, HP-UX 10.09 BLS CMW).
Availability:
All patches are available now, except for the BLS patches,
which will be available after 29 February, 1996. Contact your
FCO representative for patch availability.
Further details are provided in Hewlett-Packard Security Bulletin,
"HPSBUX9602-029 Security Vulnerability in HP-UX syslog(3) subroutine."
World Wide Web service for browsing of bulletins is available via
our URL:
http://us.external.hp.com
Choose "Support news", then under Support news,
Choose "Security Bulletins"
- -------------------
IBM Corporation
Both fixes are now currently available. Please reference the
following fixes:
AIX 4.1 - IX53718
AIX 3.2 - IX53358
- --------------------
Open Software Foundation
OSF cannot reproduce the security hole in OSF/1. However we have reproduced
the problem with syslog(3). We have a fix for the syslog(3) problem. Support
customers should contact OSF for the fix. The fix will be included in the
OSF/1 R1.3.2 update release.
- --------------------
The Santa Cruz Operation (SCO)
The "SCO Networking Maintenance Supplement for SCO OpenServer 5"
addresses the syslog() problem for all ELF binaries in the product.
This supplement is available in:
ftp://ftp.sco.COM/Supplements/net100/
This includes all the standard network utilities that are often the
target of a syslog() attack, such as sendmail. The product also
includes a few COFF binaries that use syslog(). These binaries will
be corrected in an upcoming Supplement.
- --------------------
Silicon Graphics Inc.
Silicon Graphics released Security Advisory 19951001-01-P825 and patch 825
to address the specifics of CERT Advisory CA-95:13. Please note that patch
1146 (Security Advisory 19960203-01-P1146) supersedes patch 825. This patch
addresses additional security problems in the "sendmail" program.
Please refer to SGI Advisory 19960203-01-P1146 for further information
on these additional security problems, and the location and checksums of
this patch.
Silicon Graphics has continued to investigate the 8lgm reported syslog
vulnerability. A review of utilities supplied with the IRIX 5.3, 6.0, 6.0.1
and 6.1 environments that use syslog has been performed. Silicon Graphics
has not discovered any syslog vulnerabilities in these utilities.
Past SGI Advisories and security patches can be obtained via
anonymous FTP from sgigate.sgi.com or its mirror, ftp.sgi.com.
- --------------------
Solbourne (Grumman)
Solbourne 2.5 is not vulnerable.
- --------------------
Sony Corporation
NEWS-OS 6.0.3 and 6.1 are not vulnerable.
- --------------------
Sun Microsystems, Inc.
SunOS 5.5 is not vulnerable.
Sun Microsystems has made the following patches available to address this
vulnerability:
PATCH # VERSION RELEASED
--------- ----------- ------------
100891-13 - SunOS 4.1.3 Oct 27, 1995 (International)
101558-07 - SunOS 4.1.3_U1 Oct 27, 1995 (International)
102545-04 - SunOS 4.1.4 Nov 16, 1995 (International)
100890-13 - SunOS 4.1.3 Feb 21, 1996 (US only)
101759-04 - SunOS 4.1.3_U1 Feb 21, 1996 (US only)
102544-04 - SunOS 4.1.4 Feb 21, 1996 (US only)
102903-01 - Solaris 2.3 Nov 2, 1995
101945-37 - Solaris 2.4 Feb. 29, 1996
102905-01 - Solaris 2.4_x86 Nov 2, 1995
Note also that the following patches:
100890-13 - SunOS 4.1.3 Feb 21, 1996 (US only)
101759-04 - SunOS 4.1.3_U1 Feb 21, 1996 (US only)
102544-04 - SunOS 4.1.4 Feb 21, 1996 (US only)
require that you contact your Sun Solution Center or other SunSoft
authorized service provider (ASP) in the U.S. to obtain a copy of the
actual patch.
Sun Security Bulletins are available via the security-alert alias
(security-alert@sun.com) and on SunSolve (http://sunsolve1.sun.com).
- ---------------------------------------------------------------------------
The CERT Coordination Center staff thanks Eric Allman and Wolfgang Ley for
their involvement in the development of this advisory, and thanks Karl
Strickland and Neil Woods for reporting the vulnerability.
- ---------------------------------------------------------------------------
If you believe that your system has been compromised, contact the CERT
Coordination Center or your representative in the Forum of Incident
Response and Security Teams (FIRST).
If you wish to send sensitive incident or vulnerability information to
CERT staff by electronic mail, we strongly advise that the email be
encrypted. The CERT Coordination Center can support a shared DES key, PGP
(public key available via anonymous FTP on info.cert.org), or PEM (contact
CERT staff for details).
Internet email: cert@cert.org
Telephone: +1 412-268-7090 (24-hour hotline)
CERT personnel answer 8:30 a.m.-5:00 p.m. EST(GMT-5)/EDT(GMT-4),
and are on call for emergencies during other hours.
Fax: +1 412-268-6989
Postal address: CERT Coordination Center
Software Engineering Institute
Carnegie Mellon University
Pittsburgh, PA 15213-3890
USA
CERT advisories and bulletins are posted on the USENET newsgroup
comp.security.announce. If you would like to have future advisories and
bulletins mailed to you or to a mail exploder at your site, please send mail
to cert-advisory-request@cert.org.
Past CERT publications, information about FIRST representatives, and other
information related to computer security are available for anonymous
FTP from info.cert.org.
Copyright 1995, 1996 Carnegie Mellon University
This material may be reproduced and distributed without permission provided it
is used for noncommercial purposes and the copyright statement is included.
CERT is a service mark of Carnegie Mellon University.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Revision history
Aug. 30, 1996 Information previously in the README was inserted
into the advisory.
July 05, 1996 Appendix, Digital- Added pointer to updated information.
July 01, 1996 Appendix, SGI - Added additional information
Apr. 17, 1996 Appendix, SCO - Added an entry for SCO
Mar. 29, 1996 Appendix, Sun - Modified the Sun entry
Feb. 27, 1996 Appendix, Hewlett-Packard & Sun - Updated entries
Feb. 06, 1996 Appendix, Allman & Cray - Updated entries
Dec. 19, 1995 Appendix, Digital - Modified Digital entry
Nov. 07, 1995 Appendix, IBM, SGI, Sun - Updated entries
Nov. 07, 1995 Sec. III.C - Added note recommending smrsh though it doesn't
address the particular vulnerability described in the advisory
Oct. 27, 1995 - Appendix, Convex, Data General Hewlett-Packard, IBM - Added
text
-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
iQCVAwUBMiS6lnVP+x0t4w7BAQFeUQQAmO/MePbIdKdXPk2/2qQPo035/8/2D3ip
etUicWIwTrBnl1OI++bsbdfG7fYvEhdRwkiPex4v4ChdfYHW9zFnQbTnH7xAWpKD
MTocREXcZXzyt7uZYE96wK3g/KEni3DD8crt/bP/zg8UnocG1bagRgQiI0NwuiHb
96BvRTBHHiM=
=4P+u
-----END PGP SIGNATURE-----
