The ABC's of Payphones part 01

Published in

· 5 years ago

  

 

 

                                MAD! PRESENTS... 

 

                         THE ABC'S OF PAYPHONES PART 1 

 

The information presented in this file is for entertainment purposes 

only.  The authors of this file take no responsibility for any of its 

contents. 

 

The following text file is for AT&T & GTE payphones from 1982-1985. some 

things are different on gte phones, so additions are included for them. 

 

Section 1:The coin slot 

 

For every 5 cents you put in a phone, a sound is made.  After you put 

the coins in the slot, they pass through a  totalizer which counts them. 

They then collect in a hopper.  To empty out the hopper, all you have to 

do is activate the coin relay.  Payphones sometimes hold $100 or more. 

To activate the relay place 5 cents in the phone.  Stick a magnet up the 

coin slot about 5 inches.  Now remove the front panel of the phone. You 

will see a series of wires.  Cut the red and green wires.  Now in the 

front of the panel you will see three screws. Touch the green wire to 

the third screw.  Better have a hat ready, because alot of change is 

gonna come flooding out.  Isn't this fun? 

 

Section 2:free credits 

 

If you have a friend jn germany you need to call this section's for you. 

One of the cheap things about pay phones is they depend on tones to tell 

them you inserted money.  Well if you have a red box these tones are 

easily duplicated, but i want to show you how do it without boxes in 

this file.  Now Some things you need are... A set of screwdrivers.  You will 

need both philips and flathead.  Now open the front panel of the phone and cut 

the red and green wires.  Take the cover off the top of the phone and insert 5 

cents.  You should hear nothing.  Find a green wire coming from the coin slot 

down to the hopper.  Disconnect that wire.  Now take off the case and you will 

see a small switch.  Move the switch.  This sets the totalizer backwards 1. 

Now put the hopper cover back on and reconnect the wire. Back to the front 

panel.  Feel to the right of the two screws.  You should feel 4 jumpers. 

1 of the jumpers should be disconnected.  Reconnect it. Now cut the top 

jumper. You should hear a loud pop.  Now touch the green wire to the second 

screw.  You will hear the sound of twenty five cents being inserted.  You now 

have 30 cents credit.  Repeat as many times as you need. Now reconnect the 

green wire and dial your number. 

 

GTE Notes: 

The green wire will be white. The red one will be blue.  The totalizer 

is located at the bottem of the front panel. 

 

In part 2 we will show you how to take the payphone apart, and how to 

take one home.