Copy Link
Add to Bookmark
Report
Syndicate ZMagazine Issue 188
==(((((((((( == Z*MAG/A\ZINE ATARI ONLINE MAGAZINE
=========(( === December 18, 1990
=======(( ===== Issue #188
=====(( ======= ----------------------------------
==(((((((((( == Copyright (c)1990, Rovac Ind Inc..
Publisher/Editor : Ron Kovacs
Contributing Editor: Stan Lowell
-----------------------------------------------------------------------
CompuServe: 71777,2140 GEnie: Z-NET Z*NET BBS: (908) 968-8148
-----------------------------------------------------------------------
** EDITORS DESK
by Ron Kovacs
The staff extends best wishes for a Happy Holiday! Merry Christmas!
The next edition will appear in about 10 days or shortly before the end
of the year with a special year in review edition.
Z*Magazine will enter six years in 1991 and our continued publishing of
this online magazine is up to you. Please send interesting articles
and information our way so that we can continue on a regular basis.
Thanks for reading!
** Z*NET NEWSWIRE
=================
MEGA/STE PASSES FCC TESTING
Last week, Atari learned that the MEGA/STe had passed the FCC testing as
a Type B (Consumer) product, and may begin US distribution as soon as
production is ready. That is expected to be in mid-January. This marks
the first time in memory that ANY Atari product has been approved for
consumer release within 30 days of the first product announcement...
(except perhaps for the $29 plastic monitor stand offered last year).
TT BEGINS SHIPPING TO USA DEALERS
Yes, the TT030 machine has in fact begun shipping to US dealers as a
TYPE A COMMERCIAL USE device. The price for the base unit, a 2 MEG RAM,
50 MEG hard drive device, is still $2,995. Only VARs (Value Added
Resellers) and -qualified dealers- can get the TT, and must send Atari
a letter assuring that the machines will not be sold to consumer,
residential users. The FCC is getting concerned with improper sales of
Type A devices, such as the STacy and the TT, and is considering
slapping a $5,000 per machine fine on those sold for improper use.
SALERNO LEAVES ATARI
Antonio Salerno, Vice President - Applications for Atari Corporation,
resigned last Thursday, December 6. Salerno had been in charge of
efforts to persuade major software companies to bring their well known
products to the Atari line, and had less than dramatic success. Antonio
reportedly will return to school to complete a Masters degree at
Stanford University. Atari has no immediate plans for a replacement, as
Leonard Tramiel and Atari USA staff members are taking over most of the
duties of the position.
BEACH BOY JOINS ATARI
James Grunke, technical man for the super group BEACH BOYS, is leaving
the band to replace Frank Foster at Atari as the Music Industry
Representative and MIDI promoter. James will begin work on January 1,
1991. Foster left in early September.
FULTON JOINS ATARI
Formerly of NEOCEPT, makers of the powerful WORD UP graphic word
processor for the Atari, programmer Mike Fulton has been hired and has
begun work in Atari's customer and developer support area. This fuels
earlier speculation that Atari may eventually buy and support Word Up as
an Atari brand product.
LYNX AT THE MOVIES
A promotion running in 20 premier locations of Cineplex Odeon motion
picture theaters across the USA includes an Atari LYNX game kiosk and a
sweepstakes for the show-goers. Visitors to the theaters can play the
hand-held games, mounted on the display stands. Companion advertising
for the LYNX appears in MOVIES USA, a magazine available in most movie
houses. The promotion runs throughout December, and Atari thanks a
number of user groups who helped set up and are maintaining the displays
in areas where local Atari representation needed a hand. Kudos to: MAST
(Minnesota Atari ST Users); HACKS (Hooked on Atari Computer Keyboards
Society, Glendale CA); HASTE (Houston Atari ST Enthusiasts); SPACE
(Seattle/Puget Atari Computer Enthusiasts); NOVATARI (Virginia); Mid-
Florida Atari Computer Club. For their efforts, the clubs will get to
keep the LYNX machines and the display kiosk.
FLEETWOOD MAC TOUR ENDS; ATARI IS THERE
As a sponsor of the famous FLEETWOOD MAC tour, Atari provided
complimentary seats at the final evening of their 1990 tour for several
club officials, dealers, and the press. Friday, December 7, the music
group that has been pressing hit albums since 1967 visited Los Angeles
as the last stop on their tour in support of the latest LP, -Behind the
Mask-. Fleetwood Mac uses Atari computers to control MIDI keyboards and
effects. Drummer and group leader Mick Fleetwood dazzled the sold-out
Forum stadium with an extended solo on his MIDI drum-vest, which enables
Mick to perform by touching, tapping, or slapping sensors in his
clothing. This is the same technology that Fleetwood and Jimmy Hotz use
in the HOTZ BOX, which is finally becoming available commercially. This
performance is to be the final tour date that singers Stevie Nicks and
Christine McVie participate in, although they may continue to be on
Fleetwood Mac albums. Z*NET thanks Atari for being included in this
event, and thanks Fleetwood Mac for a great show.
PIRATE GETS 5 YEARS
Dennis Hayes, the Cincinnati resident who pleaded guilty in late
October to selling more then 5,000 copies of pirates MacIntosh ROMS was
sentenced to 5 years in prison this week. In the original half million
dollar chip bust, Hayes sold copied MacIntosh ROM chips for between 130
and 195 dollars per set. Atari users were said to have purchased many
of the ROMs for the Spectre Mac Emulator for the ST. Dave Small of
Gadget's By Small stated in October that there were many legitimate
sources for Mac ROMs and that the marketplace should not be affected by
this event.
ATARI ELITE VS ROVAC
Repeated attempts this week to contact Atari Elite's legal
representation were unsuccessful and at the present time we still do
not have a clear picture of the situation. Rovac's Ron Kovacs received
a writ of summons in late November stating that action had commenced on
the matter, but to date no further information or summons has been
received. Z*Net Online continues to offer the Atari Elite response
space to articles we ran earlier in the year.
ATARI EXPLORER UPDATE
The Atari in-house publication Explorer is still around. Production
delays seem to be the problem and we have been told to expect release
in January 1991.
FIRST VDT SAFETY MEASURES ADOPTED
San Francisco California's Board of Supervisors tentatively adopted on
the nation's first active VDT safety regulations. The new regulations
would require employers with 15 or more workers to provide a mandatory
15 minute break. Also, adjustable swivel chairs, document holders and
computer terminals with detachable keyboards and adjustable, non-glare
screens must be supplied. Private and government offices would have two
years to comply with the VDT safety rules if the ordinance is approved
a second time by the supervisors and signed by San Fransisco Mayor Art
Agnos. Late NewsUpdate: This regulation was passed this week and
signed by the Mayor.
EUROPE ADOPTS SOFTWARE PIRACY MEASURES
European Community ministers have unanimously adopted new measures to
fight software piracy. The measures would grant software the same
treatment as literary works, which are protected under the international
Berne Convention on copyrights. Copyright holders would have exclusive
rights to authorize the reproduction, adaptation, translation or rental
of their works.
** ATARI 8 RUMBLES - RAMBLES - RUMORS
=====================================
by Stan Lowell
It has been much longer than I planned since my last article! Why, you
ask? The exact reason seems to have slipped my mind...something to do
with formatting a disk(THREE times!). At any rate, here I am again!
Many thanks to those of you who sent me information on GEnie, my BBS,
and elsewhere. Your input is a great resource for all Atari 8-bitters!
Among the more interesting messages which I have encountered was the
following capture from the ACUTE BBS(215-261-0620). This message was in
their networked NEAR-US message base.
Message: 194 (#4903)
Title: 8 Bit Software
Author: Randy Constan
To: All
Posted: Fri 26-Oct-90 at 2:12:00am
Origin: Nest BBS, Long Island, New York
Hi! I just want to tell all 8 Bit users that Elfin Magic Software is
still business, and still supports the 8 Bit! While the changing market
has made it impractical for me to continue advertising in major
publications, I still receive dozens of calls anually from interested
users. There's still quite a stock of SUPER 3D PLOTTER II, CIRCUIT
DATABASE v.2.3, and CHECKING ACCOUNT MANAGER, on Hand. It's a shame
when good software is available, but totally unknown to so many users
that could really put it to good use. Our address is:
Elfin Magic Co.
23 Brook Place
E. Islip, NY, 11730
Phone: 516 - 581-7657
Free information on all products is available for the asking, with a
SASE. Or, you can leave a message or personal EMAIL, or call any
evening after 6:30PM (eastern time), if you need specific questions
answered. The revolution lives on! -Randy
After this message there was a discussion of Ads on a BBS. I brought
the idea to my Network SysOps. They liked the idea. As a result, we
are encouraging 8-bit developers to post information about their 8-bit
software on any of our FoReM-XEP boards, in the 8-bit Networked base.
Our wish is to get the users & developers together. The current list of
FoReM-XEP Network boards follows:
Blank Page BBS - S. Bound Brook, NJ (My Board) 908-805-3967
Gateway City - St.Louis, MO (Support Board) 314-647-3290
Cheers BBS - St.Louis, MO 314-351-2837
Atarian Domain - Orlando, FL 407-855-1317
The Oasis - Kissimmee, FL 407-846-1765
Final Frontier - Philadelphia, PA (Support Board) 215-624-6347
The Boss BBS - Houston, TX 713-479-1967
Manitou BBS - Rochester, IN 219-223-8107
The Magic Dragon - Milwaukee, WI 414-482-2635
The Outhouse BBS - Belleville, IL
The Road to Damascus BBS-Sacramento, CA 916-929-4389
In my last article, I asked for overseas sources for sofware, and I
received feedback from Ray Wilmott on my BBS about an overseas source
with which he has done business. Their catalog is NOT a slick copy, but
a computer printout. Much of the newer sofware is on cassette.
According to Ray, their prices are good, and the catalog is free for the
asking. Thanks for passing on the information, Ray...
Stan,
Was reading your intro piece in Zmag. You mentioned European mail-order
software. Here's the address of the one I've used before in case you
want to list it in a future Z-Mag. Please let me know of any others you
find...
Miles Better Software
219/221 Cannock Road
Chadsmoor, WS11 2DD
England
-Ray
Several people left me the same names of Businesses carrying software
and/or hardware for Atari 8-bits. For simplicity, I have included some
messages from my BBS' Networked bases.
Msg# : 1243 - For Sale/Wanted
Sent : 11/06/90 at 11:48 AM
To : BOB WINNETT
From : Tom Spencer
C-net: Final Frontier-Philadelphia PA
BOB, you can get 3 I/O cables for $10 (or 1 for $4.50 get the three!)
from American Techna-Vision 1-800-551-9995.
I just got 3 and they're good. They ship UPS -land- and it takes 7 to
10 days to receive. Also there is a $4 shipping and handling charge on
all orders under all orders under $150. They also have a decent
selection of software an reasonable prices and some hardware-parts, i.e.
power packs, 1050 mechanisms, keyboards, upgrade kits etc. but no actual
computers or drives.
TOM SPENCER
Msg# : 2156 - Msgs 8-Bit - Net
Sent : 11/26/90 at 10:45 PM
To : Nick at Night
From : LARRY CHARPIAT
C-net: The Oasis BBS - Kissimmee, FL.
Subj : LOOKIN' FOR GAUNTLET
B & C Computer Visions, 3257 Kifer Rd., Santa Clara, California 95051,
(408)749-1003 has the commercial version of Gauntlet 64K disk $31.50 &
the Gauntlet Deeper Dungeons disk $22.50. You need the Gaunlet disk in
order to use the Deeper Dungeons disk. They are open Tuesday - Friday
10AM to 6 PM, Saturday 10AM to 5PM Pacific time. Closed Sundays &
Mondays. Also available for the ST, Gauntlet $44.95 & Gaunlet II $44.95
Msg# : 1831 - Msgs 8-Bit - Net
Sent : 10/28/90 at 5:32 PM
To : Nick at Night
From : LEN SPENCER
C-net: Oasis BBS - Kissimmee, FL.
Subj : LOOKIN' FOR GAUNTLET
The game he is referring to is NOT PD. I bought it new last spring for
$16.95. Yes, that was the price, NOT a typo. The place is called
Software Plus 'n' Stuff, in Columbus, Ohio. Their BBS number is (614)
239-0349. When I was there they had a lot of good stuff at good prices.
Give the board a call, they even have online price lists.
Another long time 8-bit Atari software source is:
San Jose Computer
640 Blossom Hill Rd.
San Jose, CA 95123
408-224-8575
Another message gives us a hint of the next shareware terminal program
to come from the prolific Bob Puff:
Msg# : 2129 - Msgs 8-Bit - Net
Sent : 11/20/90 at 4:38 AM
To : Richard Welter
From : Terroc
C-net: Magic Dragon BBS-Milwaukee, WI
Subj : Bobterm 1.22
...
BTW: Bob Puff is taking suggestions from people regarding what you'd
like to see in BobTerm XE, the next release of BobTerm. So if you have
any suggestions you'd like to convey him here are the BBS' that he's
involved with:
Computer World Jr.
Bob Puff's BBS
(716) 247-8355
Computer Software Services
Support BBS
(716) 247-7157
If you call CSS' BBS address messages to Bob Puff as SysOp Bob.
-=*]Terroc[*=-
Well, that about does it for this time. Once again, many thanks to
those of you who have helped me with information. If you should call
the mentioned places, please mention that you saw it here in ZMag. Let
them know that somebody still cares and appreciates their continued
support.
If you should have some useful input, I can be reached on my BBS (908-
805-3967), GEnie(S.LOWELL), and on Z*Net Online BBS(908-968-8148).
SUPPORT YOUR LOCAL USERS GROUP! Support those who support US!
** THE BLACKBOX VERSUS THE MIO
==============================
This article originally appeared in the June 1990 issue of PSAN.
PSAN (Puget Sound Atari News) is the official newsletter of several
participating non-profit Atari user groups. Approximate circulation
- 800. Please send any inquiries to: PSAN, P.O. Box 110576, Tacoma, WA
98411-0576
BlackBox vs. MIO
by Dan Knauf of S*P*A*C*E
Having had the opportunity to use both the BlackBox from CSS and the MIO
from ICD, I thought I would share what I have learned about these two
unique pieces of hardware for the 8-bit Atari.
The systems I have used include: 130XE computers (upgraded to 512k),
1-meg MIO, 256k MIO, BlackBox, Supra Modem 2400, Seikosha MP-1300AI
printer, 2 Happy 1050 floppy drives, an Adaptec 4000a hard drive
controller, 2 Adaptec 5500 hard drive controllers, a Seagate ST225 20
meg hard drive, a ATASI 3046 40 meg hard drive, and a CMI 5616 13 meg
hard drive.
An explanation of just what the MIO and BlackBox are is in order. Both
include a SASI/SCSI hard disk interface, a printer port, an RS232 port,
and some type of printer buffer. The MIO comes with either 256k or 1
megabyte of dynamic ram on board which can be used as any combination of
ramdisk(s) and/or printer spooler. The BlackBox comes either with no
user ram or 64k of static ram which can be used only as a printer
buffer. The BlackBox can also use the standard extended banks of a
130XE as a 64k printer buffer. The RS232 and/or printer ports can be
disabled in both units to allow an external device such as an Atari 850
interface to be used.
Both come with clear manuals printed on 8 1/2 by 11 inch unbound paper.
The pinouts for all ports are clearly shown in the manuals and there are
examples showing how to set up a hard disk system. The BB manual
includes several short assembler listings showing some methods of
accessing the BB from machine language.
Appearance:
----------
The MIO comes in a nice gray case with the SCSI connector and printer
port on one end. The other end has the RS232 port, on/off switch, power
plug, and two LED's - one is a power indicator the other lights up when
the MIO is busy. My 1-meg MIO has a second 9 pin plug on this end for
a planned 80 column adapter which never happened. The 50 conductor
ribbon cable which plugs into the computer is on one side.
The BB comes with no case. Cases are available for it for $39.95 (and
they are even black!). On the front edge is the connector which plugs
into the 130XE. The other side has the SCSI connector, the floppy
controller connector (see below), and the power plug. The printer plugs
onto one end and the modem on the other. The BB also has two LED's
which serve the same functions as the ones on the MIO.
Plugging it in:
--------------
The MIO has a 50 pin connector which plugs in to the parallel expansion
port on a 600XL or 800XL. An XE adapter must be purchased for $16.95 to
plug the MIO into a 130XE computer. This adapter plugs into both the
ECI port and the cartridge port on the 130XE and has sockets for two
cartridges on it. The second cartridge plug is primarily for the
Rtime-8 cartridge from ICD.
The BlackBox is built to plug directly into the 130XE. It comes with a
short 50 pin cable for plugging into an XL machine. No extra adapter is
needed. For my own system, I use the XE adapter from ICD and plug the
50 pin cable on the BB into it. (I use the Rtime-8 and this keeps the
cartridge stack shorter.)
The MIO has the expected 9 pin and 15 pin d-connectors for plugging in
your printer and modem. The BB comes with 34 pin card edges for use
with 34 conductor ribbon cable. You can use standard crimp-on
connectors for both cables (use 25 conductor ribbon cable for the modem
cable) or you can buy the cables you need from CSS.
There is also an unused 34 connection card edge on the BB. This is for
the floppy controller that CSS is planning to release. This floppy
controller will allow the user to attach industry standard disk drives -
up to 80 track 720k - to the BB.
The MIO comes with a heavy duty 9v power supply. The BlackBox comes
with a power supply which has +12v, -12v and +5v output. All three
voltages are used by the BB.
Menus:
-----
Both the MIO and the BlackBox have menus. Here is a list of options
available from the main menu of both:
1) Assign drives as floppy disks, or hard drive partitions. When
assigning floppy drives, you can assign any physical floppy drive
respond as any drive from D1: to D8: (and D9: on the BlackBox).
Note: On the MIO ramdisks can also be defined. These ramdisks refer to
MIO memory only - not memory available inside the computer. Use a DOS
ramdisk handler for the extended memory in the computer.
2) Swap Drives - shows up as 'Exchange Drives' on the BlackBox and
allows you to swap the drive assignments of two drives. For example,
you could swap drives 1 and 4. The drive assigned to D4: would then
become logical drive #1 and you could boot from it while the drive
that was drive 1 would then be addressable as D4:. I am writing this
using PaperClip which I booted from my hard drive using this method.
3) Lock Drive - Write locks a drive if it is a hard drive partition or a
ramdisk.
4) Save Congfiguration - this writes the current configuration to the
first sector of device 0,0 (the first Hard drive on your system). If
no hard drive is present this option does nothing.
The other options available from these menus are different enough to
need separate descriptions.
The MIO Menu:
------------
The MIO menu is entered by holding down the SELECT button and pressing
RESET. This loads the menu into the computers program ram starting at
address $3000. This destroys whatever was there, so it is best to re-
boot the computer after accessing the menu. The main menu is the drive
configuration menu. This is where you set up your hard drive
partitions, partition the MIO ram into ramdisks, and assign floppy
drives. The printer and RS232 menus are also accessed from here.
Available from the printer menu:
1 - Pause/Resume Printing.
2 - Clear Spooler.
3 - Print Repeat Copies.
4 - Set Port Type.
5 - Set Spooler Size.
6 - Set Port Number.
The 'Repeat Copies' option allows you to print copies of any text
currently in the MIO print spooler. Setting the port type allows
printing to either parallel and serial printers. This function is also
used to turn line feeds on/off. Spooler size is adjustable in 32k byte
increments from 0 (OFF) up to the maximum ram available on the MIO.
Maximum available ram includes all ram on the MIO not already assigned
to ramdisks. The port number can be set to P1:, P2:, or OFF.
Available from the RS232 menu:
1 - Set Baud Rate.
2 - Set Stop Bits.
3 - Set Parity.
4 - Assign Port Number.
Baud rate can be set from 110 to 19,200 baud. Stop bits can be set to
either 1 or 2. Parity can be set to none, odd, even, or space. Since
most terminal software handles these items, I am not sure why they are
on the menu. Maybe it looked empty without some extra options... :-).
R1:, R2:, or NONE are the allowable port assignments.
The BlackBox Menu:
-----------------
The BlackBox menu is entered by pressing a button on the BlackBox. This
menu does not use any programming ram and is therefore non-destructive.
You can enter the menu and usually exit with no effect on the program
you are running. Available from the BlackBox menu are:
1 - Drive Configuration Menu.
2 - Port Status Menu.
3 - 6502 Monitor.
From the Drive configuration menu you can partition your hard drive,
assign floppies, add hard drive partitions to the partition list
(explained below), enter the controller menu, or enter the partition
list menu.
The controller menu allows you to add up to 8 different hard drives to
your system.
The BlackBox allows you to have up to 96 hard drive partitions.
The information on these partitions (size, start sector, controller and
drive number, etc) is kept in the partition list. You are allowed to
name each partition with any name of up to 11 characters 10 of which
show up in the menu. The main configuration table of the BlackBox has
room for nine drives (and/or partitions). You can load any partition
from the partition list into the main configuration table by going to
the partition list, moving the cursor to the partition you want and
pressing RETURN. You will then be returned to the main configuration
table and asked what drive you want the partition loaded as.
Options on the port status menu are:
1 - I/O Sound On/Off.
2 - RS232 Port On/Off.
3 - Printer Port Number.
4 - Printer Line Feeds On/Off.
5 - Spooler Status.
6 - HD Partition List Start Sector.
7 - Save Configuration.
Yes, I/O sound with a hard drive, heh. The RS232 port can only be
turned on/off with no option to be assigned as anything other than R1:.
The printer port can be assigned as any one of P1: through P8:, ALL, or
NONE. Spooler status cycles between off, XE extended banks, and
BlackBox ram (if the ram is available on the BB). This is also where
you tell the BB where to look for the partition list which takes up to
14 sectors and can be located anywhere on the first hard disk on the
system. You can save the configuration here as well as from the drive
configuration menu.
The 6502 monitor is the best I have seen for the 8-bit Atari. It
doesn't have as many features as others but it is transparent to the
system and does a MUCH better job of interupting a program than either
DDT or Omnimon. I have retired my Omnimon and never used DDT much
anyway. With the BB monitor you can interupt a program, examine/change
memory, and usually resume right where you left off. Ever had a lockup
you couldn't get out of by pressing RESET? With the BB monitor you can
change the program counter to point to E477 (the cold start vector) and
when you exit the BB the computer will cold start. This is nice for
saving the files in your ramdisks.
Note: While snooping in the BB ROM I discovered that holding the HELP
key and pressing RESET causes a cold start. Holding SHIFT-HELP does not
cause the cold start. This feature was not mentioned in the
documentation.
Software:
--------
Other than programs to format hard drives, the only software I am aware
of for these devices requires SpartaDOS. There are programs to:
1) swap drive assigns.
2) Lock/Unlock drives/partitions.
3) Load/Save configuration tables from/to disk files.
4) Load/Save BB partition lists from/to disk files.
5) Print info contained in config files and partition list files.
6) Load a partition from the partition list into the configuration table
of the BB.
There are also some .CMD files used by BBS Express Pro! sysops to work
with the MIO. I am sure there is software available that I don't know
about or forgot to mention here.
Miscellaneous:
-------------
There are two buttons, two switches, and a bank of eight dip switches on
the BlackBox. One of the buttons is used to access the menu. The other
dumps the screen to the printer. This can be done at any time. One of
the switches allows you to select either text or graphics mode for the
screen dump. In graphics mode all Atari graphics characters appear on
paper just like they do on your screen. In graphics mode, screen dumps
take the full width of 8 1/2 by 11 inch paper. This makes a graphics 0
screen look like graphics 2 on the print-out.
The other toggle switch write protects ALL hard drives. This is handy
when you want to try out a new program and don't want it to mess with
the hard drives.
The dip switches are used as follows:
1) Force printer fault line to NO FAULT. This causes the BB to not send
any data to the printer. You could have another printer interface
(and printer) attached to your computer and control which printer
prints with this switch.
2) Enable hard disk port/high speed floppy SIO. This allows you to
disable access to your hard drives and disable the BB's high speed
SIO code for floppy disks.
*3) Enable parallel printer port.
*4) Enable RS232 port.
*5) Enable printer line feeds.
6) Printer is a Prowriter. (Used by graphics dump routine.)
7) MIO compatibility mode where hard drives are concerned. The MIO
inverts all data as it writes to the hard drive. In normal mode, the
BlackBox doesn't to this. Flipping this switch to the MIO mode
allows a hard drive to be used by either the MIO or the BlackBox.
Note: this affects ALL hard drives that are online.
8) unused.
* Switches 3-5 are mainly for systems with no hard drives online. If a
hard drive is present this info is contained on the configuration
sector.
The BB gives more storage capacity on hard drives than does the MIO. It
is able to format a drive using 512 byte sectors. These are accessed as
256 byte sectors after formatting. (Each 512 byte physical sector
contains two 256 byte logical sectors). CSS claims that using 512 byte
sector format can add up to 20% to the storage available on a hard
drive. I gained a little over 10% formatting my 40 meg hard drive in
this mode. I have a 40 meg drive that formats out as follows:
Format type sectors
MIO - 256 byte sectors 146685.
BB - 256 byte sectors 148994.
BB - 512 byte sectors *162530.
* This is the number of logical (256 byte) sectors.
The only way I have found to empty the printer buffer on the BlackBox is
to enter the port status menu and cycle the buffer off/on.
Printing through the Printer buffer with either the BlackBox or the MIO
slows down both the printing process and the computer (especially when
accessing other devices like disk drives).
Reliability:
-----------
The MIO has been plagued by problems and rumors of problems since it was
released. I personally know of at least 11 MIO's that had to be sent in
for repairs at one time or another. (And I only know 8 people who own
MIO's.) I bought my MIO's second hand and both had been sent back by
the original owners to be fixed. Here are some problems I have
experienced when using the MIO:
1) Wierd things have happened when I used the printer buffer.
Everything from wierd flickering and characters showing up on the
screen to garabage being sent to the printer.
2) I could not use my Mac/65 cartridge and the ram in the MIO at the
same time. When I tried, the ramdisk(s) formatted themselves
whenever they felt like it and I had to use a sector editor to
recover anything important. To my knowledge no one else has had this
particular problem.
3) When using terminal programs the MIO frequently locked up on me while
I was online. I suspect that this is a problem when the MIO is the
originator of a call because I know of many BBS's using the MIO that
have been online for a long time with no such problem.
Note: BobTerm 1.20 claims to solve this lockup problem by supplying
it's own handler for the MIO which also allows it to transfer at a true
19200 baud rate.
I have had no problems with the BlackBox except when I wired it into my
230 watt power supply. I reversed the +12v and -12v lines and fried a
couple of chips. A normal person would not have done this.
Product Support:
---------------
ICD has apparently lost interest in the Atari 8-bit machines. At this
time they offer little support for the MIO. If anything goes wrong,
they are not likely to offer any help to the user at all beyond fixing
them for $40.00+parts+shipping. My own experience with ICD has left a
lot to be desired. I have been using ICD products since about 1984. I
use the SpartaDOS X-cartridge and when I first got my MIO, I couldn't
exit the menu without the computer doing a cold-start. Thinking
something was wrong with the MIO, I called ICD for help. My call was
forwarded to to a technical assistance person. I explained my system
and the problem to him and he told me that the MIO was faulty and to
send it in for repairs. He informed me that the repairs would cost
$40.00+parts+shipping. Well, it turns out that exiting the MIO menu
with a cartridge plugged in causes a cold-start with all MIO's. So much
for getting good help from ICD for their 8-bit products. (In fairness
to ICD, I hear that they do a better job supporting their ST product
line.)
CSS, on the other hand has proved to be a gold mine for Atari 8-bitters.
As I mentioned above, I fried a couple of chips on my BlackBox. I
called CSS and (with some embarassment) told Ron exactly what I did.
Instead of saying 'Send it in with your wallet, checkbook, and credit
cards' he told me exactly what chips I had probably fried. I found the
chips at Radio Shack (for about $2.00) and fixed my BlackBox. These
folks really do care!
The people at CSS have answered some pretty dumb questions for me (one
or two intelligent ones too). They have even helped people with their
ICD products. They have also given me any technical information I
needed - or thought I needed - to write programs for the BlackBox.
Trivia:
------
BB really stands for BobBox. (For creator Bob Puff.)
Conclusion:
----------
The MIO has been plagued with reliability problems. The RS232 handler
has been known to cause lockups when online and drops the carrier (hangs
up the modem) when RESET is pressed. The print spooler sometimes does
wierd things and is only semi-reliable. I have been told that the
spooler sometimes writes to hard drives instead of the printer. I kept
the spooler turned off when my hard drive was attached. I just didn't
want to verify this the hard way. Thee MIO is also known to have
(electronic) noise problems, especially when used with 130XE's. The
result is loss of ramdisk configuration and/or contents. I have only
heard a few complaints about the hard disk interface on the MIO. I have
experienced no problems with the hd interface.
Pretty is as pretty does. I have found the BB to be a far more reliable
tool than the MIO. It is more flexible in most areas, offers more
options, and product support is just fantastic. And it costs less too.
The only problem I have heard of regarding the BB had to do with printer
dumps when an older Gemini-10X printer was used. A ROM upgrade has
fixed this problem. The RS232 handler doesn't cause lockups, and you
can press RESET without losing the carrier. I have never had any wierd
stuff happen when using the printer handler. I don't have the 64k
spooler on the BB but am sure it meets up to the standards of the rest
of this fine product. The screen dump feature works well. It will dump
any graphics 0-2 screen with no problem and has no problem with most
other graphics modes. The hard disk interface works flawlessly and
allows use of 512 byte as well as 256 byte sector formats.
The BB also has an MIO compatible mode so that you can use hard drives
that have been written to by an MIO. CSS claims that the BB is up to
20% faster than the MIO depending on the brand of controller and drive
used. I noticed only a slight increase in speed after converting to BB
format using my Adaptec controllers with 3 different brands of hard
drives.
I really like the BlackBox. I heartily recommend the BB over the MIO
and encourage all 8-bit Atari users to support CSS. After all, they are
supporting us.
Now if they would only get that floppy controller out...
The BlackBox - $199.95
w/64k ram $249.95
BB Case $ 39.95
Available from: Computer Software Services
P.O Box 17660
Rochester, NY 14617
Phone: (716) 586-5545
BBS (716) 247-7157
The MIO w/256k ram $239.95
w/1 meg ram $469.95
XE adapter $ 16.95
Available from: ICD, Inc
1220 Rock Street
Rockford, IL 61101
Phone (815) 968-2228
BBS (815) 968-2229
** REVOLUTIONARY CONCEPTS
=========================
PART 34 - -The Transportable Computer-
by Donald A. Thomas, Jr.
(c)1990, ARTISAN SOFTWARE
(This is PART 34 of a series of articles published and distributed by
Artisan Software. Please feel free to copy and distribute this article
as you please provided you include all unedited text. Also feel free to
upload to boards and communication services. These articles are
designed to entice you to take constructive action. Write to involved
parties and tell them how YOU feel about the subject.)
NOTE: THIS ARTICLE MAY BE EDITED AND IS ENCOURAGED TO BE PUBLISHED BY
ATARI AND/OR OTHER COMPUTER RELATED PUBLICATIONS. SUCH USE OF THIS
ARTICLE MUST INCLUDE COPYRIGHT AND AUTHOR DESIGNATIONS AS WELL AS THE
NEW PRODUCT RELEASE INFORMATION AT THE END OF THIS ARTICLE.
The Atari Portfolio is a stick of dynamite that has explosive power.
For less than three hundred dollars, an individual can obtain a fully
functional and programmable MS-DOS command compatible computer that fits
in the palm of their hand. Even adding the cost of peripherals, the
Portfolio is more than a thousand dollars less than the its nearest
competitor- The Poquet computer (retailing at $1999). This is NOT meant
to be a sales pitch, it's pure fact. Anyone who has the need for a
portable computer can link the Portfolio and quickly transfer compatible
data within seconds. Not hours, not minutes, but seconds. And this
link is not limited to MS-DOS platforms. Virtually any computer in the
world can exchange data with the Portfolio.
The secret lies in two areas. The most significant of the two is the
ASCII character set standard. A pure ASCII text file on one computer
means exactly the same thing on another. Therefore, the files that are
transmitted between two incompatible computers are 100% compatible.
This has always been true, but is now being better understood by more
and more people. The second part of this secret is the ease of the
physical link.
There is an energy department in Canada which is looking at Portfolios
as a remote, unmanned environmental data collecting device. Reporters
and photographers are discovering the Portfolios' ideal design for
notetaking and scheduling. Salespeople are providing customers with
quotes and receipts instantly. Marketing people are compiling
statistics with up to a 15 pound lighter load than the laptop
alternatives. Hackers like the uninterrupted on-line time since the
desktop is difficult to take on vacation. Executives keep in touch with
their E-mail and appointments all in one machine. Students find the
Portfolio easy to carry between classes. The Portfolio has already
proven its broad potential and is fast becoming a trusted tool.
I think the most amazing phenomenon I have encountered in regard to the
Portfolio, is how well every platform is quickly learning to make the
connection. The Portfolio has already been advertised as -the Portable
Mac-. Of course MS-DOS users get along fine with it and have since the
beginning. Just about every category is covered. Well, except for the
Atari ST market. I am simply dumbfounded at how many Atari 16-bit
computer users struggle with the Portfolio. Now before you all start
writing and telling me you get along fine with it, I am talking general
terms here. It seems that the Atari 16-bit community has the most
difficult time exchanging files with the Portfolio. Of course, you are
probably an exception.
I personally feel that the Atari ST and MEGA computer user should
investigate the Portfolio closely, even if it is not purchased. For
those who are committed to help spread the Atari namesake around, the
Portfolio is the easiest advertisement Atari has ever produced. One of
those users referred to above is a broadcaster in the Los Angeles area.
I spoke to him one day and he told me he was ready to buy a desktop. He
said Memory Cards were beginning to cost as much as one anyway and the
Portfolio inspired a confidence in computers. Since he was so pleased
with the Portfolio, he wanted advice as to what desktop to buy. I sent
him to our friends in Bellflower (Mid-Cities Comp Soft) and this
broadcaster is now a proud owner of an ST. The Portfolio is CLEARLY THE
MISSING LINK BETWEEN THE REST OF THE WORLD'S COMPUTERS AND THE ENTIRE
ATARI LINE.
When I first learned of the Portfolio, I resented Atari's apparent
departure from the ST/MEGA environment. I still cringe from time to
time to think that Atari could ever decide to abandon their traditional
line of computers. It is obvious they will not as they have now the new
STEs and TTs being introduced in the United States. As I learned more
about the Portfolio, I was amazed at its total function abilities. The
Portfolio is enhanced even more by optional software and hardware. I
use mine for light spreadsheets, but mostly for writing my thoughts as I
commute to work each day.
I also take it along on business trips for the address book functions.
And everywhere I go someone stops and asks about it. If they heard
about it, they are amazed that it is exactly as advertised. If they
didn't, then they are simply amazed.
If you have been considering to link the Portfolio to an ST/MEGA
computer, then read on. It's easy, inexpensive and some fun too. What
you will need is the optional Serial Interface and a -DB9 (female) to a
DB25 (male) null-modem serial cable-. If that sounds like a lot, just
know it is a rather standard cable and your computer dealer will know
what all that means. The cable should not cost more than $20.
You will also need communications software on the host computer (the ST/
MEGA). One popular title is FLASH, but there are many good ones. You
will not need a communications program on the Portfolio. Read my lips
... you will not need a communications program on the Portfolio. Make
the connections between serial ports using the interface and cable. Run
your communications software on the host and designate a TEXT receive.
When that is set up, then go to the Portfolio and type COPY FILENAME.EXT
AUX. This will issue a copy of your file out through the serial port.
To receive a file on the Portfolio, type COPY AUX FILENAME.EXT. Please
replace FILENAME.EXT with the true filename.
If you have problems, it may be because you have not initialized the
serial interface through the SETUP menu or some parameters are
mismatched. The only parameter you will probably need to set is the
baud rate on the host computer. 9600 baud is the default on the
Portfolio and the suggested speed.
As you become more sophisticated with the Portfolio, you may discover
that your file transfer needs have grown. You will need a communication
program on the Portfolio if you wish to do non-ASCII file transfers, for
instance, ARTISAN SOFTWARE has just released TRANSPORT for the ST/MEGA
computers to help you through the confusion. It is written specifically
to link traditional Atari computers to the Portfolio. For beginners, an
express menu system will enable fast file transfers and display exactly
what and when to type the commands you need. Advanced users will learn
to access two advanced menu option screens. Included is the ability to
generate non-transferrable file reports, strip files on non-ASCII code
characters, Xmodem file transfers and much more. It will work on color
or monochrome systems and sells for $24.95. You may obtain TRANSPORT
from your local Atari computer dealer or you may order direct from
Artisan Software. Direct orders must add $1.50 shipping/handling and
California must add 6.25% sales tax.
If you desire more information about the Portfolio, consider one of the
many Atari publications, visit some users' groups meetings and subscribe
to GENIE or COMPUSERVE.
For information on how you can -JOIN THE REVOLUTION- and actively
support the exposure of Atari computers, write: ARTISAN SOFTWARE, P.O.
Box 849, Manteca, California 95336.
=======================================================================
Z*MAGAZINE Atari 8-Bit Online Magazine is a bi-weekly magazine covering
the Atari and related computer community. Material contained in this
edition may be reprinted without permission, except where otherwise
noted, unedited, with the issue number, name and author included at
the top of each reprinted article. Commentary and opinions presented
are those of the individual author and does not necessarily reflect
the opinions of Z*MAGAZINE or the staff. Z*Magazine Atari 8-Bit Online
Magazine, Z*Net Atari Online Magazine, Z*Net are copyright (c)1990 by
Rovac Industries Inc, a registered corporation. Post Office Box 59,
Middlesex, New Jersey 08846. (908) 968-2024. Z*Net Online BBS 24
Hours, 1200/2400 Baud, (908) 968-8148. We can be reached on CompuServe
at 71777,2140 and on GEnie at Z-NET.
=======================================================================
Z*Magazine Atari 8-Bit Online Magazine
Copyright (c)1990, Rovac Industries, Inc..
=======================================================================
