Copy Link
Add to Bookmark
Report
Silicon Times Report Issue 0737
*---== ST REPORT INTERNATIONAL ONLINE MAGAZINE ==---*
"""""""""""""""""""""""""""""""""""""""
"The Original 16/32bit Online Magazine"
from
STR Publishing Inc.
""""""""""""""""""
September 13, 1991 No.7.37
==========================================================================
STReport International Online Magazine
Post Office Box 6672
Jacksonville, Florida
32205 ~ 6672
R.F. Mariano
Publisher - Editor
-----------------------------------------
Voice: 904-783-3319 10 AM - 4 PM EST
BBS: 904-786-4176 USR/HST DUAL STANDARD
FAX: 904-783-3319 12 AM - 6 AM EST
-----------------------------------------
STR East: FNET 350 - The Bounty ST BBS <Home of STR> 1-904-786-4176
STR West: FNET 075 - Bloom County BBS 1-415-965-9347
STR Canada: FNET 018 - ///Turbo Board Support 1-416-274-1225
STR Europe: FNET 1031 - <<<INTERNET>>> 011-44-296-395-935
__________________________________________________________________
> 09/13/91: STReport #7.37 The Original 16/32 bit Online Magazine!
-------------------------
- The Editor's Desk - CPU REPORT - PORTFOLIO NEWS
- Know your Modem! - The Flip Side! - ColorScan Review
- CODEHEAD NEWS! - The Garden of.. - STR Confidential
-* MEGA STe -> HOBBLED! *-
-* THE CAGLE EXPOSE! *-
-* EXCLUSIVE! -> CT. SHOW REPORT! *-
==========================================================================
ST REPORT INTERNATIONAL ONLINE MAGAZINE
The _Number One_ Online Magazine
-* FEATURING *-
"UP-TO-DATE News and Information"
Current Events, Original Articles, Hot Tips, and Information
Hardware - Software - Corporate - R & D - Imports
==========================================================================
STReport's support BBS, NODE 350, invites BBS systems, worldwide, to
participate in the Fido/F-Net Mail Network. Or, call Node 350 direct at
904-786-4176, and enjoy the excitement of exchanging information relative
to the Atari ST computer arena through an excellent International ST Mail
Network. All registered F-NET - Crossnet SysOps are welcome to join the
STReport Crossnet Conference. The Crossnet Conference Code is #34813, and
the "Lead Node" is # 350. All systems are welcome and invited to actively
participate. Support Atari Computers; Join Today!
==========================================================================
AVAILABLE EXCLUSIVELY ON: GENIE ~ CIS ~ DELPHI ~ BIX ~ FIDO ~ F-NET
==========================================================================
> The Editor's Podium
What is an Atari Basher????? Many, many truly concerned folks in
this ever shrinking Atari arena have been accused of being an Atari
basher. One might find that most of the interesting folks you meet on the
online services are telecommunicating for more than one reason. The
majority frequent these services for information, friendship, good debates
and of course, up to date files.
Back to my question, what is an Atari Basher... A difficult question
to answer for any honest answer that sounds even the slightest bit
accommodating will bring out the Atari lemmings and apologists in a hurry.
In any case, here goes; There is really no such thing as an Atari
basher. To be a basher, one must absolutely hate everything about Atari.
Its people, products and very existence. There is no such person or
thing. There are however, those who LOVE the hardware and HATE the
company. There are those who LOVE the hardware and silently TOLERATE the
management. And finally, there are those who have LOVED the hardware and
couldn't take any more double talk from the company's management and now
are on other platforms. Bet you even know a few of those or at least
about them.
Developers are in a precarious position, many of them will, in
private or under the veil of be kept anonymous, tell you "the hardware has
always been good but that the company's management is among the worst in
recorded history." They do quickly add that they are not bashing Atari.
They are genuinely concerned for both themselves and the users who Atari
built themselves upon. The working classes worldwide, those on a fixed
income. Remember the old company slogan? Power without the Price?
Dealers are also being forced to dance on eggshells. Should they
become too vocal in voicing their dissatisfaction, they know that product
flow, support and other factory/dealer factors will become non-existent or
severely hampered. Why is it the apologists and those who continually
defend never ask, "where are all the dealers?" "Why have the majority
left?" Actually, there many questions that should be asked and are not.
Why? Because, it seems, people who should be asking the questions are,
amazingly, either intimidated by anticipation of Atari's reaction (usually
vindictive) or are still hanging on to a non-existent hope of a miraculous
cure to the current problems. It takes hard work, not miracles.
In defense of Atari.... Yes folks that's right. But I speak of the
hardware only.
In my business, I have a total of 17 machines in use. Three are part
of what I call major work stations, one is our support BBS and the
remainder are in use in the shop.
The three work stations are
A)- (1) Mega4 STe with a built in 105mb, 260mb outboard, SF314, Omnimon
Monitor and a KX P4450 laser.
B)- (1) Mega4 ST w/Turbo16, Image Systems 24" Monitor, Omnimon Monitor,
260mb hard disk, Canon Flatbed Scanner, SLM605 Laser.
C)- (1) 1040STe 4mb, 105mbHD, Indus GTS-100, Omnimon Monitor.
All hard disk systems, including the built in unit, are controlled
with and formatted by ICD's great hard disk utility software.
As all can see, I am heavily involved with Atari hardware.. very
heavily. And yes, I do criticize Atari's policies from time to time. I
think their hardware is superb, always have and probably will for many
months in the future. One thing is for sure, I will continue to use my
equipment until such time as it no longer satisfies my needs. And
hopefully, I will be able to update my systems with newer, more advanced
Atari computers.
To see people invite others to LEAVE the Atari community simply
because they disagree with one person's opinion is immature and
offensive. The Atari community of users is a diverse and rather large,
outspoken body of good people. Every so often, there creeps in those who
feel they are doing the right thing by asking those who have something
less than charitable to say about the current conditions in the Atari
market to leave, go get a different computer... etc.
Personally, I am sure these folks think they are helping but in
reality, they are doing far more damage than Atari itself. Why chase
those who CARE enough to open up say what is hurting them? It doesn't
make sense.
Atari is the one(s) who must listen and try to correct the ills in the
ever shrinking marketplace. Not some misguided user demanding that other,
dissatisfied users leave the userbase.
Its odd to see these happenings taking place while those who could
blunt or offset the hostility are obvious by their silence. Yet... at
other times they are most vociferous. One can't help but wonder if these
so called 'leaders' have any idea that by their silence they are condoning
the 'lynch mobs'. People, think about this.... if enough of the unhappy,
dis-satisfied users do LEAVE.... what or who would be left? Yep, thats
right... even the best of us, you included, have at times been irked about
one thing or another about Atari. Suppose, just suppose every user who
was ,at one time or another, irked at Atari 'jumped ship' or was invited
to leave and did just that? It would be a disaster.
I am ever so grateful, for those who speak up about problems they or
their friends are encountering with Atari as thats the best way to get
them resolved by Atari. And I might add, in most cases, this is exactly
what happens. Atari is contacted by the user and the problem gets solved.
Have I EVER seen Atari invite a user to leave and get a different
computer? Nope..... Atari in all its ways, still realizes that a
customer (user) even unhappy at times is STILL a customer. One that CAN
be made happy, can be satisfied. Once they leave.... all is lost. Not
only for Atari, but for all of us.
As always, thanks for your strong support!
Ralph
TODAY'S NEWS ..TODAY!
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> STReport's Staff The regulars and this week's contributors!
================
Publisher - Editor
------------------
Ralph F. Mariano
PC DIVISION AMIGA DIVISION MAC DIVISION
----------- -------------- ------------
Robert Retelle Charles Hill R. ALBRITTON
STReport Staff Editors:
-----------------------
Michael Arthur Lloyd E. Pulley, Sr. Dana P. Jacobson
Lucien Oppler Brad Martin Judith Hamner
John Szczepanik Dan Stidham
Contributing CorrespondEnts:
----------------------------
Michael Lee Richard Covert Roger Stevens
Brian Converse Oliver Steinmeier Ed Krimen
Tim Holt Andrew Learner Norman Boucher
Ben Hamilton Harry Steele Steve Cooke
IMPORTANT NOTICE
================
Please, submit letters to the editor, articles, reviews, etc...
via E-Mail to:
Compuserve.................... 70007,4454
GEnie......................... ST.REPORT
Delphi........................ RMARIANO
BIX........................... RMARIANO
FIDONET....................... 112/35
FNET.......................... NODE 350
NEST.......................... 90:19/350.0
"REPORTING ABOUT ATARI NOT FOR THEM."
***********************************************************************
COMPUSERVE WILL PRESENT $15.00 WORTH OF COMPLIMENTARY ONLINE TIME
to the Readers of;
ST REPORT INTERNATIONAL ONLINE MAGAZINE
"""""""""""""""""""""""""""""""""""""""
"The Original 16/32bit Online Magazine"
NEW USERS; SIGN UP TODAY!
CALL: 1-800-848-8199 .. Ask for operator 198
You will receive your complimentary time
and
be online in no time at all!
NEW "WIN $25" WINNERS ANNOUNCED
Congrats to Clayton Walnum for winning a $25 CompuServe credit for his
upload of the game NOIDS to the Atari Arts Forum (GO ATARIARTS).
Congrats also to Stuart Coates for his winning upload DIVERT.LZH to the
Atari Productivity Forum (GO ATARIPRO). Stuart wins a $25 CompuServe
credit for his contribution.
NEW PLAY-BY-MODEM GAMES IN ATARIARTS
The following files are now available in LIBRARY 1 ("New Uploads") of the
Atari ST Arts Forum (GO ATARIARTS) courtesy of Forum member David Becker:
BGAMMO.ARC - Online backgammon can be played over the phone lines with a
modem. Many options including the ability to play the computer make this
a fun and challenging monochrome game. Freeware.
PAIGOW.ARC - Las vegas style PaiGow poker. Play against the computer or
over the phone line with a friend! Monochrome freeware.
PROGRAM OF THE WEEK FROM DOUBLE CLICK
Last week's Double Click program of the week will drop DTR at the touch
of a key! Download file DCDDTR.ARC from LIBRARY 13 of the Atari Vendors
Forum (GO ATARIVEN).
NEW FROM CODEHEAD SOFTWARE
CodeHead has made arrangements to carry the very best vector graphics
package for the ST/TT: Avant Vector, an object-oriented graphics program.
Avant Vector features sophisticated automatic tracing abilities that will
allow you to convert bit-image graphics to vector graphics consisting of
lines, curves, and filled shapes.
This program is really incredible! Find out more about it by downloading
CodeHead's demonstration file, AVDEMO.ARC, from LIBRARY 16 of the Atari
Vendors Forum (GO ATARIVEN). Also download file AVPR.TXT for the complete
press release of Avant Vector, plus additional information on another new
software package called Repro Studio (a next-generation graphics
program).
NEW IN ATARI PORTFOLIO FORUM
Intuit Software in Menlo Park, California is investigating the expansion
of their product line into the palmtop market. To help determine the
features and potential of this growing area, they have contracted the
services of a research firm to assemble an informative focus group.
If you would like a member of this research firm contact you, please
read and respond to message # 16218 from Don Thomas of Atari Corporation
in the Atari Portfolio Forum (GO APORTFOLIO). This is a great
opportunity to become instrumental in the adapting of popular software
to the Portfolio.
Information on a new Spell Checker to be available for the Portfolio on
November 1 is now in LIBRARY 1 of the Atari Portfolio Forum (GO
APORTFOLIO) as SPLCHK.TXT.
ANNOUNCING THE NEW COMPUSERVE PALMTOP FORUM
The CompuServe Palmtop Forum covers all palmtop organizers and computers
other than the Portfolio, which will remain in its own forum. Please drop
by and take a look around. Type GO PALMTOP at any CompuServe
service prompt.
THE ATARI PORTFOLIO FORUM ON COMPUSERVE
HAS BEEN DESIGNATED AN
OFFICIAL SUPPORT SITE BY ATARI CORPORATION
"GO APORTFOLIO TO ACCESS THE ATARI PORTFOLIO FORUM"
***********************************************************************
> CPU STATUS REPORT LATE BREAKING INDUSTRY-WIDE NEWS
=================
Issue #37
Compiled by: Lloyd E. Pulley, Sr.
-- Novell Bags Two Pirate BBSes
Novell says it recently filed copyright and trademark infringement law-
suits and executed separate seizure orders against the Wish List and Red
October, two California BBSes. Novell said it took the action based on
the alleged selling of pirated software by the BBSes.
The defendants in both cases are alleged to have sold and distributed
pirated Novell Netware operating system software as well as hundreds of
other software programs from large and small vendors. Novell says that
settlements are pending in both cases.
According to sources at the Software Publishers Association (SPA), this
is the first of many similar actions that is expected in the near
future.
-- Prodigy Continues to Add New Services
Even though Prodigy, a IBM-Sears joint venture, continues to loose
money, it also continues to add new services. Marking its first
anniversary, Prodigy introduced local classified ads and a new bill-
paying service. Other new services are expected, such as a 'Background
on the News' service.
-- Nintendo Set for National Launch of
The Super Nintendo Entertainment System
Nintendo of America Inc., a subsidiary of the world's largest manufac-
turer and marketer of video games, Nintendo Co. Ltd., is gearing up for
Monday's national launch of its 16-bit Super Nintendo Entertainment
System (Super NES).
Nintendo feels that the Super NES will sale 2 million hardware units
and 6 million pieces of software in 1991. Super NES will come packaged
with "Super Mario World" and will carry a suggested retail price of
$199.95. They hope to have 10 Super NES game paks available by Christ-
mas.
-- IBM and Apple Expected to Produce
Palm-Size Computer
Rumors say that IBM and Apple Computer Inc. are gearing up to form a
joint venture in multimedia computing and to cooperate on radio com-
puter links. According to the New York Times, industry executives and
trade reports are saying the first project will be a palm-sized com-
puter that can play CD-ROMS with a computer that can communicate by
radio waves to follow.
-- Slow US Economy Slows Down Japanese
4-meg DRAM Production
The word from Japan is three top semiconductor makers there will reduce
production of 4-megabit DRAM (dynamic random access memory) chips
because of slow US economic recovery.
-- Sharp Claims Color LCD Breakthrough
The LQD011 is a color liquid crystal display (LCD) which Sharp claims is
only 12mm thick and consumes just six watts of electricity. Sharp claims
this 8.4 inch thin film transistor (TFT) based product is due to a new
"edge light" technology.
The price for the new color LCD will be $3,700 and the company hopes to
begin producing the screen in quantity in April, 1992.
--Hayes Introduces the Smartmodem Optima 96
Hayes Microcomputer Products Inc. has added the Optima 96 to its Smart-
modem line. While the Optima 96 does not have all of the features of the
Hayes Smartmodem Ultra, it is expected to be priced very aggressively to
compete against the low-priced 9600 baud modems currently on the market.
The Optima 96, is a V.32 modem that provides standard CCITT V.32 connec-
tivity for 9600 baud line speeds and CCITT V.42bis error-control and
data compression for data throughput up to 38.4 Kbaud. The Optima 9600
also supports CCITT V.22bis (2400 baud), CCITT V.22 (1200 baud), and
CCITT V.21 (300 baud), as well as industry standards 103 (300 baud) and
212A (1200 baud).
Optima 96 communicates asynchronously and synchronously as well as sup-
ports Hayes AutoSync, a standard Smartmodem feature that allows the sys-
tem's asynchronous communications port to transmit data synchronously,
which Hayes says eliminates the need for an SDLC or Bisync card.
-- Microsoft Continues to Grow
Bill Gates, Microsoft Corp. chairman, feels that his firm will continue
to grow despite the slumping computer industry. Mr. Gates credited Win-
dows for most of the growth.
For the fiscal year ending June 30, Microsoft's net income grew 66% to
$463 million based on a 56% sales increase of $1.8 billion.
-- Hitachi Sets Record!
According to Hitachi, it has set a new data transmision record of 10
gigabits per second across a 100 kilometer distance. The old record was
1.6 gigabits per second across 40 kilometers.
The reason for this radical increase is a new super-fast optical element
that Hitachi has developed, "APD". This is considered to be an important
technology in the creation of Integrated Services Digital Networks which
can involve trasfering millions of bits of pictorial data.
-- The Fast Just Got Faster, Telebit
Introduces the World's Fastest Modem
The Telebit T3000 was recently announce by Telebit. The company claims
it is the fastest on the market, capable of sending up to 57,600 bps.
The modem is compatible with other V.32bis, V.32 and 300, 1200, 2400 bps
CCITT and Bell modems.
According to a company spokesman, the T3000 uses the standard V.32bis
and the V.42bis data compression standards. But where most of the
V.32bis modems only provide speeds up to 38,400 bps, the T3000 is 50%
faster. Using a 4:1 data compression routine, realizes the full capacity
of the V.32bis modem.
The retail pirce of the T3000 is $1,095 and it carries a two-year
warranty.
-- GAO Finds Stock Market Computers
Not Adequately Safegarded
A study by the General Accounting Office (GAO) of the nation's six com-
puterized stock exchanges - New York, American, Midwest, Pacific, and
Philadelphia, as well as those of the National Association of Securities
Dealers, which oversees the NASDAQ over-the-counter market - found that
only the NASDAQ system had adequate safeguards. Between them, the six
exchanges handle over 98 percent of nation's estimated $2 trillion
annual stock trading volume.
-- To Help Reduce Overcrowed Jails, Computers
To Keep Track of Defendents Living at Home
Next month, Marion County, Indiana will start a pilot program which will
involve computer tracking of defendents in criminal cases who live at
home and are awaiting trial. What makes this program different is that
it is the first that will keep track of individuals awaiting trial and
is hoped to reduce overcrowded jails.
A computerized telephone system will call each defendent as often as is
deemed necessary. When the call comes, the defendant will take a photo
of themselves with a camera attached to a TV-like unit. The image will
then be transmitted to the Volunteers of America office in Indianapolis,
a national Christian human services organization who have agreed to in-
stall the units and report violations to the court.
-- Hay Buyers/Sellers Helped by
Purdue University
Indiana farmers can now easily link up with prospective hay buyers and
sellers by using a special computer system that was established by the
Purdue University.
Using computers, modems and a BBS system, the callers can search the
database for buyers or sellers of their hay crop. The hay locator system
runs on a 3B2 system under Unix System V. The modem access number is
317-494-6643.
-- National Semiconductor Looses
$168 Million for the First-Quarter
National Semiconductor Corp. announced a first-quarter loss of $168
million based on sales of $411 million down from $442.7 million a year
ago.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
IMPORTANT NOTICE!
=================
As a reader of STReport International Online Magazine, you are entitled to
take advantage of a special DELPHI membership offer. For only $29.95 ($20
off the standard membership price!), you will receive a lifetime subscrip-
tion to DELPHI, a copy of the 500-page DELPHI: THE OFFICIAL GUIDE and over
$14 worth of free time.
NOTE: Special offers can be found in your favorite Atari magazines:
START CURRENT NOTES ST INFORMER
ATARI INTERFACE MAGAZINE
SIGNING UP WITH DELPHI
======================
Using a personal computer and modem, members worldwide access
DELPHI services via a local phone call
JOIN -- DELPHI
--------------
1. Dial 617-576-0862 with any terminal or PC and modem (at 2400 bps,
dial 576-2981).
2. At the Username prompt, type JOINDELPHI.
3. At the Password prompt enter STREPORT.
For more information call:
DELPHI Member Services at 1-800-544-4005
or
at 617-491-3393 from within Massachusetts or from outside the U.S.
DELPHI is a service of General Videotex Corporation of Cambridge, Mass.
SPECIAL ANNOUNCEMENT
--------------------
The 20/20 Advantage Plan IS FANTASTIC! And it features 20 hours online
for just $20 a month! The $20 is a monthly fee that covers your first 20
hours online via direct dial into one of DELPHI's two direct-access lines,
or via a special Tymnet 20/20 Access code. It also gets you additional
hours at just $1.20 per hour. And you get free access to several services
on DELPHI as part of the Advantage Perks.
Other telecom services may have additional charges. Canadian Tymnet users
have an additional telecom charge. Office Time access (7 a.m. to 7 p.m.,
weekdays) may have an additional charge. And of course, other restric-
tions may apply. But this is still an amazing deal!
IMPORTANT NOTICE!
=================
As a reader of STReport International Online Magazine, you are entitled to
take advantage of a special DELPHI membership offer. DELPHI has waived the
sign-up fee! For a limited time, you can join the World's Premier Online
Service for FREE! Members can access DELPHI worldwide through hundreds of
local access lines.
For more information please contact:
DELPHI at 1-800-544-4005 and ask for Member Services.
DELPHI- It's getting better all the time!
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> CONNECTICUT SHOW STR SHOW NEWS "What a wonderful day!"
==============================
Connecticut Atarifest '91
=========================
by Harry Steele & STeve Cook
BCS/Atari
Ah! What a wonderful day for the Connecticut AtariFest '91. You
couldn't ask for a more perfect summer day. Warm, low humidity, just
great. STeve Cook and I left Boston Friday afternoon for the 3 hour trek
to the Hilton Hotel in Bridgeport, CT. Before I forget... Many Thanks to
my wife Joanne for agreeing to babysit for my two greyhounds, two cats,
two rabbits, one mouse and STeve Cook's two playful dogs. The 'puppy'
being a 13 month-old, 100-pound German Shepherd.
After checking into the Hilton, STeve and I gravitated to the Lounge
to see who we might find. Lo and behold, Bob Brodie, Rick Flashman and
Jeff Lomicka talking about Dusseldorf. They really know how to put on an
AtariFest. Bob was happy, I think, to see the boys from Boston again.
Bob mentioned to me that the CT Fest will be a fairly small show and he
didn't let the group get carried away with enthusiasm and turn it into a
national Fest like we did last year at the New England AtariFest '90 in
Boston.
Well, 6:00 A.M. comes early, Mickey "D's" for breakfast, started
setting up for the Fest at 8:00 A.M. STeve Cook and I were representing
The Boston Computer Society - Atari Users Group. The Connecticut
AtariFest '91 was sponsored by the FACE and STARR user groups along with
Computers Etc. Brian Gockley did an outstanding job of putting on this
Fest. Everything ran smoothly and was well organized.
Attendees:
----------
Atari Corp:
Bob Brodie, Director of Communications, always a major attraction, was
his usual great self, talking to everyone. When Bob gave his seminar,
the whole show floor emptied out into the seminar room leaving most of the
vendors to themselves. Many left their own booth to hear Bob's talk which
was highlighted by his personal responses to the many questions that were
asked by the audience.
Atari Explorer:
John Jainschigg, Publisher, Editor for Atari's flagship magazine. His
technical know-how and clear writing style is well known in the Atari
world. John gave an exciting lecture on how Atari Explorer magazine is
published.
Applications & Design Software:
Angela Gockley demonstrated the Universal Item Selector 3.3 and the
much awaited Universal Network.
The Boston Computer Society:
Atari Users Group, STeve Cook and Harry Steele, talked to many Atari
enthusiasts, selling PD library disks, IMG clip art, PageStream PD fonts.
The hit of their booth was the GOGO Dancer demo both monochrome and color
versions. A donation of a BCS 'T' shirt was made to Bob Brodie. He tried
to pay for it, but we wouldn't let him.
GEnie:
Darlah Pine was unable to attend due to a family crisis.
GFA Basic:
John Barger demonstrated the latest upgrade to their powerful
programming language which is capable of transporting its code and
programs to run on MS-DOS machines.
Gribnif Software:
Rick Flashman, Dan Wilga and the lovely Tricia Metcalf demonstrated
the famous Neodesk 3, as well as a plethora of new products: Cardfile 3,
STalker 3, STeno 3, and Arabesque.
Alternative Hardware:
Leo Taylor and Joe Mardo had several customized hardware products in
wooden cabinets and towers. Their best demo was an Atari running a PC CAD
program running an expensive HP color printer/plotter which amazed most of
the attendees.
SoftLogik:
Bill Caferelli and Bernie Paist demonstrated Pagestream 2.1 with color
printouts, and were so busy talking to people that they didn't get a
chance to see any of the seminars.
ST Atari Road Runners user group:
Eleanor Andujar and my old friend Madeline, who is just a joy to talk
to, worked their user group booth selling software at unbelievable prices.
Step Ahead Software:
Nevin Shalit showed Tracker/ST, a sophisticated address book/mail
merge/label printing program. At his seminar, Nevin demo'ed Retouche and
DiDot.
Taylor Ridge Books:
Clayton Walnum displayed his C-Manship Complete book on everything you
need to know to program in C.
TidBit Software:
Jeffrey Lomicka showed the GOOD Back-Up Utility, a hard disk backup
program with a unique incremental backup method and checksum capability to
encourage you to back up your hard drive frequently.
All in all, a good time was had by all. The group hopes to have
another CT AtariFest again sometime in the future. The next time, being
bigger and better.
"After hours" thoughts:
All of those who remained until the final hour of the CT AtariFest
were treated to a question and answer session with Bob Brodie. One of the
things that Mr. Brodie discussed was the Professional Systems Group and
the AEGIS Program. I feel this is definitely a step in the right direction
and should have been started way back in 1985. Reaching out to work with
developers and dealers is truly necessary if the Atari computer is to
remain a viable alternative.
Mr. Brodie discussed WORD UP 3.0, although no release dates were
mentioned. When Atari purchased the rights to WORD UP, they brought half
of the staff (one person) from NEOCEPT back with them. This is enabling
them to continue the development on WORD UP. The new WORD UP will utilize
FSM GDOS. FSM GDOS is expected to be ready in October.
The TT is selling very well and the new ones will have a 1.44 Meg
floppy disk drive with the appropriate controller chip. UNIX for the TT
may be in developers hands this December.
The engineers and designers at the Design Facility near Dallas are
burning the midnight oil, Bob says. If you see them leaving at 8:30 in
morning, they didn't just get there, they worked all night long. I wonder
what new surprises Atari has up their proverbial sleeve?
Bob related some encouraging and humorous "war stories" about some of
the many shows he has attended.
Don't Be a BIG BLUE LEMMING! Make your own decisions, check-out an Atari!
(STeve's new Atari slogan! -grin-)
__________________________________________________________
> The Flip Side STR Feature "....a different viewpoint"
=========================
A Little of This, A Little of That
==================================
by Michael Lee
----------------
A helpful hint from R.Belanger - Cat. 24, Topic 1, Message 272 - From
the Cooking and Baking Roundtable on Genie...
I do re-use dryer sheets, but not in the dryer. Instead, I capture
the "used" sheets to use to clean my monitor screen. It's far cheaper
than buying "screen wipes" and provides the same antistatic quality
that is beneficial for monitor or TV screens.
------------------
Comments about Powermonger from KWAI on Delphi...
Gee, I've never reviewed any game before. So bear with me please.
Basically, Powermonger plays alot like Populous; you struggle to
attain greater power in order to wipe out the enemy. I haven't played
Populous for some time, but I think you have to kill every single
enemy in order to win the game.
However, in Powermonger, this is not necessary (thank goodness!).
There is a scale on the screen, and if it tips steeply on your side,
you can retire and thus win the game. Powermonger has more details;
characters move about to fish, chop trees, make weapons, etc. The
sprites are smaller, due to the enormous amount of info. displayed on
the screen. You can zoom in to get a better look or pick up specific
objects. The enemies you will face can be of several different
groups, so strategy is a must if you want to win the game. I find
Powermonger more involving than Populous, for you have to gather
people to build a bigger army, ensure that food is always available -
- otherwise, you will see your followers leaving you. Also, it is
better to have stronger weapons, so you will need time and resources
to make them. Sometimes, you have to make enough boats to transport
your army across the vast ocean to another land.
Once you have conquered a land, you may save it to disk. Overall,
Powermonger is a great game. I like Populous, and Powermonger even
more, but both games are unique. I hope this helps!
P.S. In order to save a game, you will require the on-disk special
formatting utility. However, mine doesn't work and ECA had to format
my game disks. Check with your dealer if this problem has been fixed.
----------------
Just to show you that not everything is serious when you're online, here
are some jokes that you might enjoy - from the TeleJoke RoundTable on
Genie...
From E.Merrill - Cat. 5, Topic 3, Message 7...
The Pessimist's guide to Engineer-talk
(what they say - what they mean)
--------------------------------------
"That's interesting"
- Wow! I've never seen anything remotely like that before.
"We'll just run diagnostics"
- I wonder if that'll give us a clue.
"So we've eliminated XXX"
- It's probably XXX, but it's bloody hard to get at.
"I've just powered it down"
- I tripped over that bloody power cord again
"Ok, that's good"
- What the heck was that noise?!?
"We've noticed some failure evidence"
- Something's burning...
"If you'll just..."
- I don't want to be the one to blame when it crashes
"Yes, you'd expect to see that..."
- Hell, that's stuffed as well!
Some limericks from Stephen Kahn...
There once was a System called DOS,
Which threw all its users for a loss.
Don't worry, said Bill,
Just take this pill,
And my GUI will cover your OS.
There once was a company called Big Blue,
That grew very peeved with Bill and his crew.
Replied our cool dude,
"Don't come unGUID,
You can have your Windows and OS/2."
Fourty-Five different definitions of what the initials IBM stand for.
Compiled from about 30-40 different posts...
1) <I>'ve <B>een <M>ugged
2) <I> <B>uy <M>oney
3) <I>t's <B>etter <M>anually
4) <I> <B>ought <M>acintosh
5) <I>'ve <B>een <M>isled
6) <I>t <B>it <M>e
7) <I>tty <B>itty <M>achines
8) <I>t <B>ombs <M>any
9) <I>gnorant <B>ull <M>anure
10) <I>diotic <B>ovine <M>anure
11) <I>ncessant <B>owel <M>ovement
12) <I>ttiy <B>itty <M>orons
13) <I>nferior <B>ut <M>arketable
14) <I>diotic <B>rainless <M>utants
15) <I>ncredibly <B>oring <M>achinery
16) <I>tty <B>itty <M>icroprocesser
17) <I>ntroverted <B>rain <M>auler
18) <I>mbeciles <B>ecome <M>anagers
19) <I>nstall <B>igger <M>achines
20) <I> <B>ecame <M>acintosh
21) <I> <B>lame <M>icrosoft
22) <I>cky <B>lue <M>achines
23) <I>diotic <B>ull Meter
24) <I>diots' <B>ewilderment <M>achines
25) <I>diots <B>ought <M>e
26) <I>mmense <B>ins of <M>oney
27) <I>mperialism <B>y <M>arketing
28) <I>mpractical, <B>ut <M>arketable
29) <I>n a <B>efuddled <M>anner
30) <I>ncest <B>reeds <M>orons
31) <I>ndustry's <B>iggest <M>istake
32) <I>nert <B>lue <M>onoliths
33) <I>nstalled <B>y <M>asochists
34) <I>nstitute of <B>roken <M>inds
35) <I>ntrepid <B>ureaucratic <M>adness
36) <I>nvoluntary <B>owel <M>ovement
37) <I>t <B>eats <M>attel
38) <I>nescapable <B>ut <M>ediocre
39) <I> <B>arely <M>ove
40) <I>ll <B>egotten <M>achine
41) <I>t's a <B>roken <M>achine
42) <I>nternational <B>it <M>anglers
43) <I>nteresting <B>ut <M>eaningless
44) <I>dolized <B>y <M>orons
45) <I> <B>e needing more <M>oney
----------------
General discusion about UNIX for the TT - From Ron Luks (Sysop) - From
CIS....
I agree that this is a niche market that Atari could quite profitably
exploit, but its all dependent on getting a solid UNIX implementation
out the door. Lets keep our fingers crossed that something solid is
shown at Dusseldorf shortly.
More comments from Jeff (Intersect Software).....
I absolutely agree with you. Unless a "solid" implementation of UNIX
is released I don't see a future for Atari. TOS or otherwise. On the
other hand if a SOLID UNIX is released and the rumors of Client-
Server GEM are true then I see a brighter future for the ST.
From what I've been able to glean from MANY sources (all rumor). Unix
implementation was done. Some Optimization was still needed but BETA
testing was proceeding in Germany.
Projects for UNIX that still needed implementation were:
1) ST Emulation under UNIX in a window. A massive undertaking that
justifiably would take many months.
2) Appletalk networking.
3) Client-Server Unix to GEM terminal (ST). A project that I heard
rumors about and thought, "wow finally someone is thinking".
Client-Server Unix to GEM Terminal would have two modes determined by
the type of client, X-windows terminal or ST running a GEM terminal
emulation.
If a X-Windows terminal a series of X-Windows commands mimicking the
appearance of GEM windows would be used or if a GEM terminal (ST or
PC running a GEM emulation) it would work something like the Instant
Sound and Graphics emulation for Interlink.
Instead of sending graphics BIT BY BIT it's sent as a series of GEM
VDI commands. The IGS Terminal Emulation then passes those commands
to GEM in the local ST. So 10 bytes could draw a scroll bar, 8 bytes
a box with a fill pattern, etc. X-Windows is done the same way in the
Client-Server mode but X-windows is much more massive/flexible and
requires a multi-thousand dollar terminal.
Let's face it, right now very few university students (except for the
Science and engineering students) use the University Unix mainframes
because the operating system is too difficult for them. This scheme
would solve that problem.
With Client-Server UNIX to ST software released and TT UNIX available
we might be able to see some ST's sold to university students for
their use on the University's Mainframe. With 520 STe's with monitor
selling for less than $600 (street price) it's the least expensive
way for them to get GUI terminals (ASCII terminals are available at
about $300.00). The University might be able to get an even better
price direct from Atari.
In the long term it's more than a niche market. Apple (under JOBS)
went to great pains to insure the University "niche". Those
University students eventually become Teachers who have a say in the
Public school computer purchases.
If UNIX does manage to evolve into a "standard" for the common man it
will be because of GUI. Atari could have a major role in this over
the long term if they follow through on UNIX and Client-Server GEM.
From Loc Duval...
Hello, that's me again... Here some news on ASV, the Atari Unix for
the TT.
It is now finished and I have tested the beta release in Germany
during the Atari Dusseldorf Show.
Unix has been converted by a UK firm: Unisoft. It is a Unix System V
release 4 with some BSD tools. X-Windows 11.4 has been ported by US
company. Just like Motif 1.1.2.
Over this you have an amazing GUI called X-Wish, running under Motif,
and developped by french firm: NSL (Non Standard Logic). You also
have an amazing tool for Motif programmers: X FACEMAKER. It is an
very friendly Interface Maker for Motif applications. All this is in
standard on the 320 Mo hard disk, given with the TT/X.
You also have: The GNU C compiler The GNU C++ compiler The GNU source
Level Debuger NFS/RFS An ethernet board (on the VME bus) A new mouse
with 3 buttons...
----------------
Until next week.....
***********************************************************************
:HOW TO GET YOUR OWN GENIE ACCOUNT:
_________________________________
To sign up for GEnie service:
Set your communications software to Half Duplex (or Local Echo)
Call: (with modem) 800-638-8369.
Upon connection type HHH (RETURN after that).
Wait for the U#= prompt.
Type: XTX99587,CPUREPT then, hit RETURN.
GEnie costs only $4.95 a month for unlimited evening and weekend access to
more than 100 services including electronic mail, online encyclopedia,
shopping, news, entertainment, single-player games, and bulletin boards on
leisure and professional subjects. With many other services, including
the biggest collection of files to download and the best online games, for
only $6 per hour.
MONEY BACK GUARANTEE! Any time during your first month of membership if
you are not completely satisfied, just ask for your $4.95 back.
GEnie Information copyright (C) 1991 by General Electric
Information Services/GEnie, reprinted by permission
***********************************************************************
> ABOUT ATARI STR Spotlight "Just expressing themselves..."
=========================
TWO DIFFERENT VIEWS
===================
Compiled by Michael Lee
----------------
From Dan Fruchey - Cat. 18, Topic 16, Message 78 - from the ST Round-
table on Genie...
Dear friends and Atari faithful; I am now writing a letter which I con-
sider extremely painful but necessary. I have done my best to support
Atari, as an owner of the original 16K 800 through the 520 ST and
through various upgrades culminating in a MEGA 4 with all the Atari
peripherals including hard disks and a laser printer.
I have staunchly defended the corporation and its products in print, on-
line, and through various conferences.
I have bought (and written for) the magazines, sold my own Atari pro-
ducts (and found I couldn't made an adequate return due to slow sales),
supported the products of other vendors, I even tried to open my own
Atari computer store but investigation of the concept led me to the
conclusion that the market could not support a store and the corporation
who sells the machines was unwilling or unable to supply an adequate
volume of machines that would help me develop the market further in my
area.
I served as disk librarian and board member for an Atari users group
that at one time consisted of over 300 members and I have watched it
dwindle to a hand full of die hards who either could not afford another
machine or could not believe that the Atari market was simply a ghost
who refused to lie down along with the Altair, Adam, and other machines
whose time had come and gone.
I watched the Atari computer stores dwindle. Even this week I accom-
panied an Atari die hard to one of the once-great San Francisco Bay Area
Atari only computer stores and watched him pick the latest products from
a 30% off bin for a "moving" sale. The store had progressively gone
through smaller and smaller storefronts until this month when they were
selling off their Moniterm monitor, Atari laser printer, floor model
computers, and other standard store paraphernalia at a cash register
that was plastered with a poster that boldly proclaimed "All Sales
Final."
I worked with St Applications until they folded, proudly wrote for STart
until their demise, and in the end I lost a great deal of money in sup-
port of the Atari market still fighting to proclaim the wonders of "The
Computer That Jack Built."
From a virtual flood of hardware and software I watched the flow dwindle
and in some areas have watched the availability of software and hardware
completely vanish. From a well established base of Atari developers and
renowned manufacturers I have watched support and new applications dwin-
dle until I could not even obtain support for good products that were
once the pride of the Atari line.
I still provide support to the few businesses that are standing by their
Atari machines due to a lack of funds (although they have ALL chosen new
systems to purchase once their financial picture gets better - including
large companies that have been major supporters of Atari DTP in their
catalogs and advertising). Both of the dealers in my area who supported
the Atari solution dried up almost a year ago, one sells only IBM
through a much smaller storefront and the other made the decision too
late and no longer owns his own business). Our closest dealer is 65
miles away.
I still love my Atari machine. It is fast, easy to use, and the output
is superb. The hardware is all the things the corporation is not and the
promises and rhetoric which issue forth from Atari headquarters is no
longer believed. My Atari friends and I simply nod is understanding pity
when Atari announces a new product, knowing it will arrive too late with
too many shortcomings and not enough support (either from the corpora-
tion or disillusioned developers) to ever make the machine into what it
was meant to be.
I still keep and use my Atari for only one purpose - desktop publishing.
But this market cannot truly support the corporation when so many other
areas are lagging or non-existent. I salute the developers and many
manufacturers who have made wonderful products that have made me still
use my machine for a short while longer. Particularly Nathan Potechin
and the fine staff of ISD who receive my admiration and respect. It is
my fondest wish that they would develop Calamus for the PC market. It
outstrips anything available and I believe they would not be disap-
pointed.
It is with sorrow I admit that I recently committed myself fully to the
PC market. The hardware, software, support, and user base all exist in
this market on a level that is staggering. I have found that Atari can
no longer lay claim to the "Power Without The Price" motto as their
systems and software are, in most cases, no longer state-of-the art and
most software is no longer ported to the Atari platform and very few
developers dedicate the time to create new applications and entertain-
ment products specifically designed for the Atari market. The 60 million
PC users in North America wield clout that we 250,000 Atari users will
never achieve and our attempts at addressing this problem with our
favorite hardware manufacturer have failed miserably.
With all of its bumps and warts (DOS, etc.) I know that the companies
will answer their phones tomorrow, not a machine politely informing me
that the phone has been disconnected and there is no forwarding number.
I can choose from a variety of software manufacturers who currently work
to upgrade their products, not pick the only product that is still being
supported in a field of drifting relics.
What more can I say? I have done all that I can and it is not enough.
There is no word of encouragement I can offer, no parting wisdom that
will somehow change an unchangeable blindness of that part of the
Tramiel clan. Good luck my fellow Atarians, you will need it. For myself
I will hold onto my machine and treasure it till the keyboard freezes up
and the cables fray but I can longer support the unsupportable. As
rapidly as possible I am changing my files over to my new system knowing
that it may take many years for the PC market to achieve the maturity
and functionality Atari users experienced since the mid 1980's. To those
of you who also go my way I look forward to sharing my thoughts with you
in another GEnie forum and in magazines of another type.
I'll look back to read your comments but forgive me if I don't reply.
The issue has been decided, it is not a happy choice but a necessary
one. I'll always treasure the knowledge and pleasure I derived from the
system, I'll always treasure the friendships made. But I will never go
back.
Unhappily, Dan Fruchey, Former STart DTP Contributing Editor, Former ST
Applications Columnist, Former Atari Computer Club Board Member (ST ACE
of Northern California), Former Atari Enthusiast
** And Now, The Other Side **
From WALLY - Cat. 18, Topic 16, Message 82 - from the ST Roundtable on
Genie...
I've no doubt that Atari is in a slump right now, but they have a pretty
sturdy plan laid out and are doing their best to follow it. Things are
actually _starting_ to look up, even though the road is a long one and
we are just now taking it.
I've read the entire thread in this topic and have this to say:
I'm stationed at the Coast Guard Air Station in Sitka, Alaska. Computer
support of any kind up here is nonexistant, and you just can't drive
somewhere to find it; there aren't any roads leading off the island.
Everytime I've had a question, wanted to make a purchase, or needed
service I've been more than happy with Far North Computer and Cave Creek
Computer. They offer expert service, expert advice, expert everything.
My setup is 110% usable by anyone...
In the last 1 1/2 years, I've had eleven friends buy MS-DOS type com-
puters. Two bought Packard Bell Legend-types, three bought differing
models of Radio Shack's T1000, the other six bought God knows what
(Dell, Leading Edge, etc...)
Of these eleven people only two are still using their computers, and
they hate them. One of the guys with the PB actually quit GEnie because
his computer was too hard to use. None of them can afford any of the
software they want for their computers. None of them can afford to get
the cards necessary to have joysticks and hand scanners and the like.
All of them come to me for help using their computers and I give them as
much help as is humanly possible. They still don't know how to use their
computers (something like un-ARCing a file is completely out of their
reach, and they keep little notebooks to help remember procedures,
etc.).
Inevitably, when showing them how to use their computers the issue of my
computer comes up, i.e., "Hey Wally, what kind of computer do you have?
What makes it easier to use?" Inevitably, I bring them to my set-up for
a demo. They honestly can't believe a computer would be that easy to
use. Likewise they can't believe the low prices I pay for software that
does what they want to do. Software they have been putting off buying
because it was so expensive for their machines.
I have two friends that bought Mac's. They have as much wrapped up in
their keyboard, monitor, modem, 40 meg HD, and computer as I do with:
1040STe w/4meg RAM
Emerson Multi-sync
Seagate 85meg HD w/ ICD host +
Migraph hand scanner
SupraModem 2400
KX-P1124 printer
Like my IBM-type friends, they often need help using their computers,
and can't afford software. Like my IBM friends, they wish they had
bought an Atari.
Of course, up here the lack of service makes ALL computers equal in
attaining service...
I will be buying a SuperCharger (286, I hope), but I will never buy an
IBM-type computer and dump my Atari. Why? Because this little Atari
will do everything any other computer will do. Why? Because I can make
this little Atari do whatever I want it to do. Why? Because I don't
have to worry about being snubbed for what type of IBM clone or Mac I
own at computer stores and in RT's. Why? Because I have all the pro-
grams and support I need and more things are coming out every month.
Why? Because I don't have to pay IBM/Mac prices for hardware and
software. Why? Because I am not a POWER USER, just a computer user.
I am not a dyed-in-the-wool Atari fanatic, just a computer user happy
with his setup.
Regards,
Wally
the kayaking hermit
in Alaska
________________________________________________________
> Codehead News! STR InfoFile Automatic vectoring has arrived!
===========================
For immediate release
CodeHeadQuarters
September 12, 1991
--------------------
CODEHEAD SOFTWARE ANNOUNCES AVANT VECTOR & REPRO STUDIO!
""""""""""""""""""""""""""""""""""""""""""""""""""""""""
Automatic vectoring has arrived!
CodeHead Software is releasing two powerful new high-end graphics and
image manipulation packages for Atari computers -- Avant Vector and
Repro Studio! We're proud to bring these excellent state of the art
products to North America.
At CodeHead Software we're quite selective about the software we use
personally. Not very many programs get a big "WOW!" out of us. But to
say that we found Avant Vector and Repro Studio impressive is a major
understatement ... in fact, they blew us away!
--==* Avant Vector *==--
Avant Vector is an object-oriented graphics program, with sophisticated
automatic tracing abilities which allow the conversion of bit-image
graphics (such as IMG files or Degas drawings) to vector graphics
consisting of lines, curves, and filled shapes. Vector graphics have
several big advantages over bit-image graphics; the most important is
that once an image has been converted to a mathematical vector
description, it can be scaled up or down to any size without losing
detail or looking "blocky".
Bit-image graphics can be imported into Avant Vector in many formats,
including IMG, TIFF, IFF, and Degas (both compressed and uncompressed),
and also vector graphics in the CVG (Calamus), GEM (GEM 3 metafile), and
EPS (Encapsulated Postscript) formats. You can save vector graphics in
CVG, GEM, or EPS formats (in Avant Plot) for use in desktop publishing
applications. New drawings can also be created from scratch with Avant
Vector, and up to seven graphics windows can be opened at once with
cut-and-paste and merge functions. The graphics created by Avant Vector
can be imported into most popular Atari DTP programs, and can also be
printed directly from within Avant Vector itself, with support for the
Atari Laser, NEC 24-pin, and Epson 9-pin printers.
In a recent review of seven auto-tracing programs for the Mac, PC, and
Atari ST/TT in a European magazine, Avant Vector was rated the best of
the bunch! The reviewer gave Avant Vector high marks for its totally
unique "manual tracing" mode, which snaps curves and points along a bit
image AS YOU DRAW THEM!
The most amazing thing about Avant Vector is its smooth, almost
transparent interface and extremely simple, consistent operation. You
can learn everything you need to get around in minutes, and be creating
extraordinary graphics in no time at all!
There are two versions of Avant Vector. The high-end version, Avant
Plot, contains extensive plotter support for serious professional
applications, and EPS file import/export features. Both Avant Vector
and Avant Plot are available immediately.
--==* Repro Studio *==--
Repro Studio is a next-generation graphics program with a dazzling array
of professional features. Available with or without a hand-held scanner
(256 gray level), Repro Studio is the first ST graphics program to let
you create and edit images with true grey tones, as well as standard
monochrome or color images in many different formats.
In Repro Studio the dots that make up your image can be set to a grey
level instead of being simply on (black) or off (white). If you have a
standard ST monochrome monitor, grey scales won't be shown on screen but
rather are displayed as fill patterns. But you _can_ edit them and
manipulate them with Repro Studio for use with DTP applications and in
professional printing situations.
In addition to its grey level capabilities, Repro Studio has an enormous
number of powerful tools for working with bit-image graphics, including
flexible cut-and-paste functions, many shape and fill options, bezier
curves, lasso and masking functions, pixel prioritizing, raster
"screens" for printing purposes, anti-aliasing and dithering, the
ability to combine pictures in many ways, the ability to read and use
GDOS, Calamus, and Adobe Postscript fonts, and much more.
Repro Studio is able to load many different types of graphics files,
including IMG, TIFF, Degas, Art Director, and Neochrome formats. After
editing, touching up, or scanning, images can be saved in any of the
above formats, or as Postscript files.
Repro Studio comes with or without a 256 gray scale scanner. It is
expected to be available by the end of the year, and like its companion,
Avant Vector, will work with all ST, STe, and TT computers.
--==* Pricing *==--
Retail pricing for Avant Vector and Repro Studio is as follows:
Avant Vector ............ $ 495
Avant Plot .............. 1195
Repro Studio ............ 195
Repro Studio w/scanner .. 895
--==* Special Introductory Prices *==--
If you place your order before December 31, 1991, you can purchase Avant
Vector or Avant Plot for the following prices:
Avant Vector ........... $ 445 (a savings of $50.00)
Avant Plot ............. 1095 (a savings of $100.00)
Order directly from us before the end of the year and save! (Most major
credit cards accepted.)
For further information contact:
CodeHead Software
PO Box 74090
Los Angeles, CA 90004
voice (213) 386-5735
fax (213) 386-5789
____________________________________________________________
> Once upon a Time... STR Feature "In the Garden of Atari..."
===============================
In the Garden of Atari...
Once upon a time there was a beautiful garden that had some, if not
the finest, fruit to be found anywhere in the land of Tram. This Garden
was ruled by a wise and successful King of many years experience. This
Lord of the Garden had produced another Garden some ages ago(relatively
speaking) that was the most successful of its kind. The Garden Lord was
tiring of the effort that had to be put forth to maintain this "new"
Garden. The Garden Lord said to his sons, "Here ye my sons, I will
entrust this Garden to your hands, water it, feed it and make it grow as
you have seen your father do for many years". The sons, Princes of the
Garden as they became, took the burden from their father and said "Father,
we will do as you bid us, we will make you proud!".
So the Princes planted the Garden with a new plant. This plant was
unlike any other in any of the other Kingdoms. The plant, as the Princes
so named it, was "Estee, Pride of the Land of Tram". Word soon spread
about the "Estee" plant and many came to see the wondrous new fruit from
the old Lords' Garden.
Many people from lands across the Great Sea came to see the Estee
plant and wonder. These people soon sent emissaries from their Lords to
find out if they could purchase the fruits of the mighty Estee plant. The
"Keepers of the Garden" agreed to sell them the fruits of the Garden.
The Princes of the Garden agreed also. So when the Plants starting
producing the wonderful fruit, it was almost all shipped by the Great
Sailing Ship to the land of Urope across the Great Sea.
The people in the land of Tram received enough of the Estee fruit to
whet their appetite for more, much more. The Tramites approached their
Princes about receiving more
of this wonderful fruit that there Great Land
produced. Alas, the word from the Castle, Vale of the Sun, was not so
encouraging. The Princes proclaimed to the people that there is not
enough fruit to go around. The shipments to the Land of Urope had
seriously caused shortages of Estee fruit available to the "Home Folk".
But do not fret said the Royal Family, for we will see that the Tramites
get all they want from now on. The people believed their Rulers and were
pacified.
Time passed. The people cried for more Estee fruit. The Word from
the Vale of the Sun was the same," You will be receiving the Estee fruit
that we promised real soon now". The Tramites waited. Time passed...
The peoples from the other Kingdoms soon forgot about the Estee fruit
and went about their everyday business with there own gardens, producing
competing fruits for sale to the people of the many Kingdoms across the
Great Land.
Time passed...
The people of the Land of Tram wanted more of their Estee fruit.
They had worked The Garden, plowed the rows, fed the plants and put many
pounds of sweat into their home Garden fruit. Still they received only a
small percentage of Estee for their labor. The Word from the Castle was
that the majority of the Estee fruit would be sold to the local people
first then the remainder would be sent to the Land of Urope. Time
passed...
Soon MANY of the Tramites became disenchanted with the Royal Family
and its many promises. These people the left the Kingdom of Tram for
other more honest and truthful lands where the people were given what the
Lords promised.
Friction began to rise within the Court. Some of the formerly
well-liked officers of the Court of Atari were dismissed. The people were
shocked! Why are these the people to be removed from the Court, they are
the most trusted of all in the Court of Atari.
Suddenly, with a flash of light and the odor of cordite, there
appeared two wise old wizards. These wizards had been in the land of Tram
long before it was known as Tram. These Wizards were all about the land
talking and listening to the people of this good land. One Wizard named
Troperts, approached the Princes of the Garden and foretold of bad things
to come if the people of Tram were not given the priority over the
Uropeans. The other Wizard named Tenz, also approached the Princes and
told them only things he knew they wanted to hear. Troperts was then
frowned upon as a cynic and rabble rouser. "Leave our Court!" said the
Princes to Troperts.
to be con't......
__________________________________________________
> COLORSCAN STR Review Color IMG processing
====================
COLORSCAN by SKWare One
=======================
by Doyle C. Helms
Color IMG processing
Color Scan is a program that processes dithered IMG files from any
source (MI-GRAPH hand scanner or ANY scanner that can produce dithered
scans). From within this program you load and manipulate these images
with user definable color palettes or pre-defined default palettes. Once
the image has been completed, you can then save the finished image in one
of many formats.
DOCUMENTATION-
The documentation for COLOR SCAN comes on the program disk
pre-formated for immediate printout. The documentation is very well
written and understandable to even the most novice user. Mr. Webb's
writing is enjoyable and humourous. The manual amounts to 16 pages with
no table of contents or index. There is a "quick reference" printable
document for fast lookups, so indexes or content tables are really not
required for a manual this short.
PERFORMANCE-
I have used this program for several weeks and have processed 100's
of images in just about every possible option and I can gladly report of
NO problems.The program runs only in ST low rez. COLOR SCAN will run in
ST (8 true gray scale, or 16 psuedo-gray) or the ST(E) true 16 gray
scale.I am currently using a Mega 2 with a T-20 accelerator. The program
is of a very acceptable speed (in processing) at 8MHz. The 20MHz mode is
just a sheer joy to work with!
USEFULNESS-
This program can be a useful as ANY paint program. How useful is a
paint program? Well, it can be as much a pleasure as any game(more so to
me) for passing time, expressing creativity etc. I personally enjoy
scanning images and then mixing them in various ways to produce a work of
art <large humble grin>. In my experience with video scanners,I have
found that this program in conjunction with Touch-Up/hand Scanner far
exceeds the capture of very small details that Computer Eyes could never
achieve. Once I have an acceptable scanned color(which is not difficult
to achieve) image I then save the image in its native format (IM0, color
IMG format). I then save the image as either a TNY or Spectrum file. The
Spectrum file is saved in 20 color format vice the standard 16. The other
SAVE options include DEGAS PI1 and PC1 and IFF (which saves the file full
length vice a cropped image in DEGAS or TNY if the image is larger than
screen size). COLOR SCANned color IMG files can be exported over to
SEURAT 2.21+ for editing and saving in any foramt.
USER INTERFACE-
The interface for option selections is standard GEM buttons and
dialogs. Eaassyy! COLOR SCAN uses your currently selected fileselector of
choice (UIS, LGS, etc.)
OVERALL IMPRESSION-
Excellent! Currently this is the only program of it's type for the ST
and darn well worth the price. If you own a scanner of any type that will
produce a dithered image you owe it to yourself to purchase this program.
The use of your scanner will increase exponentially!
PROGRAMMING NOTES
COLORSCAN was written entirely (no machine code nor compiled
assembler) in GFA BAsic Version 3.5 and compiled in GFA Basic Version 3.5E
Compiler. GFA Basic is a product of GFA Systemtechnik.{If I had not told
you this you would have NEVER guessed it!}
SKWare One, Inc.
[P. O. Box 277, Bunker Hill, Illinois 62014 USA]
____________________________________________________________
> KNOW YOUR MODEMS STR FOCUS A Comparison of High Speed Modems
==========================
A Comparison of High Speed Modems
Compatibility/Features/Differences/Prices
Including: HST, V.32, V.32bis, V.42, V.42bis
By Mike Ehlert, SysOp: PACIFIC COAST MICRO BBS
USR HST/V.32bis (805) 494-9386
USR HST 14.4k (805) 497-3456
CC Speedmodem (805) 496-7320
FidoNet 1:102/1001
Edited by Jeff Rigby for the Atari Forum
A High Speed Modem
==================
Are you thinking of going to a High speed modem?
2400 bps can be very slow for transferring large files. Modems
advertised as 4800 are really only 2400 with data compression such as
MNP-5 or even just software data compression. There are now some new 2400
BPS modems with V.42bis, which claim 9600 bps Thruput. Don't be fooled.
A 2400 bps modem with error correction will NOT be significantly faster
when transferring compressed files such as ZIPs. An actual 9600 BPS or
faster modem will make a tremendous difference in your transfer time. Most
9600 BPS users never want to go back to 2400. There is a lot of confusion
and mis-information about 9600 bps and faster Modems. I wrote this to
help clarify and point out the differences between the different modems
available IBM compatible machines.
The CCITT
=========
The International Consultive Committee for Telegraph and Telephone
(CCITT) set the V.32, V.32bis Standards in 9600 bps communications. They
have also set the standards of 1200 and 2400 bps in Europe which differ
from the "BELL" standard in the US.
Unfortunately the V.32 standard was very expensive to implement for
the modem manufacturers and several non standard 9600 protocols were
developed and implemented since the release of the V.32 standard in 1984.
The HST has already become the industry standard in the IBM BBS world.
Since the release of new LSIC (Large Scale Integrated Circuits) that
make the V.32 9600 baud modems very cost effective and the fact that the
V.32 CCITT standard is a Public Domain (no license or royalty), there is
more price competition going on with these than with the HST, which
currently has no true competition.
Half Duplex Vs. Full Duplex
============================
Half Duplex is When Data is Transmitted in one Direction at a time.
Full Duplex is both directions at once. 2400 BPS modems are Full Duplex
The HST Modem uses an improved form of Half Duplex, in which one direction
is transferring at high speed while the other direction is sending ACK/NAK
signals at a slower speed. A similar method is used on the Speedmodem.
V.32 modems use Full duplex, which in most cases does not improve
performance when used on a BBS. There is one way to take full advantage
of a Full Duplex Modem: By using a protocol called Bimodem to upload and
Download at the same time at 9600 bps in each direction! Unfortunately
Bimodem has not become very popular. Most BBS's and users still use one
direction transfer protocols such as Zmodem or YModem-G.
What is MNP, HST, V.32, V.42?
=============================
MNP
MNP (Microcom Networking Protocol) levels 1-4 are methods of error
correction in which the two modems connected verify the integrity of the
data transmitted. Error correction is required for several streaming
protocols such as Ymodem-G in which the protocol sends a constant stream
of data and lets the modems do the error correction. This requires a
clean, noise free line as streaming protocols will abort if line noise
interferes too much. These MNP Levels are used in almost all High Speed
Modems Made today, But Just because two modems both have MNP it does not
ensure that they will both talk to each other at over 2400 baud.
MNP Level 5 is for data compression. Since All BBS's have their files
archived in ZIP, LZH, GIF or some such compressed format (try to ZIP a LZH
file), MNP5 can actually increase the overhead by attempting to compress
the file further. Therefore BBS's leave MNP5 turned off, and so should
the BBS callers.
HST
---
HST stands for "High Speed Technology" - a method of communicating at
high speeds which was developed by US Robotics in 1984. The original HST
modems were 9600 BPS by using a 9600 bps channel in one direction and a
300 (later 450) bps "back channel" in the other to send ACK/NAK signals
for confirmation of data - a half duplex mode - often referred to as
"ping-ponging". In 1989 USR improved the HST to run at 14400 bps by
further optimizing their proprietary method.
All HST's sold now include the 14400 bps speed as well as the original
9600 bps mode. Because the HST 14400 bps is the raw speed, It allows the
HST to transfer pre-compressed files such as ZIPs at faster speeds than
any other 9600 bps modem: over 1700 Characters per second (cps). The HST
has become the "BBS-Standard" in high-Speed modems. More BBS's use the
HST than any other type of modem, including the V.32.
As of January 1st 1991 all HST modems also include the V.42/V.42bis
error correction and data compression (not to be confused with V.32). The
HST's can also be upgraded to the HST "Dual Standard" allowing it to also
be V.32 compatible. The price is significant for this upgrade however,
and in very few cases is any speed gained. V.32bis modems from USRobotics
use an all new circuit board. Previous models cannot be upgraded to
V.32bis. There IS a trade-in/trade-up program, but it's a not cost
effective at $575.00 plus your old modem in trade.
V.32
----
V.32 is a 9600 Baud standard that was established by the CCITT back in
1984. V.32 is full duplex (9600 bps in both directions at once).
Normally this would be impossible, but using a technique called "echo
cancellation", one modem can filter its own tones from the phone line,
enabling it to pick out the signals from the other modem. However, echo
cancellation requires that high speed modems include built-in digital
signal processor (DSP) chips, which is the main reason V.32 and V.32bis
costs so much. V.32 also includes a fallback to 4800, if line noise
becomes a problem at 9600. The V.32 standard also provides an optional
error-reduction scheme, called "trellis-coded" modulation (TCM). TCM
allows 9600 modems to check for transmission errors with a redundancy bit,
which results in fewer errors on noisy lines. Most V.32's include this
option, but some do not.
V.32bis
-------
It was first realized in 1989 that it is feasible to push V.32 up to
14400 bps, the same speed as the HST now runs. This requires even better
echo cancellation and an overall improvement in receiver quality, so it is
also more costly to produce than the V.32. V.32bis has not yet officially
been finalized by the CCITT, but as of January 1st US Robotics has
started shipping a new version of their Dual Standard Modem which includes
V.32bis in an early but functional form. USR plans to update their DS
ROMS when the CCITT actually release the completed V.32bis specification,
scheduled for mid 1991. It's expected that other Modem manufacturers will
not be able to offer the V.32bis technology until the 4th quarter of 1991.
V.42
----
V.42 has nothing to do with actual modem speed, but how the error
correction and data compression schemes interface. When the CCITT
approved V.42 in 1988, they decided to include two different error
correction and data compression schemes. The first one is MNP,(short for
Microcom Networking Protocol) MNP classes 2, 3, & 4 handle error
correction. Note that MNP-5 was not included in the V.42 standard because
it is only used for data compression. MNP was made an official standard
due to the large number of modems that currently use it.
The Second method is the preferred method, known as LAP-M (Link Access
Procedure for Modems with only MNP is called "V.42 Compatible" and one
with LAP-M its known as "V.42 Compliant". If a V.42 Compliant connected
to a V.42 compatible, it would first try to Handshake with LAP-M, and
after it realized that the other modem is not Compliant, it would try the
MNP Method, and they connect.
Most V.32 modems are fully V.42 compliant, but they do NOT have to be,
according to CCITT guidelines. So when purchasing a V.32 modem make sure
that it is also fully V.42 compliant, not just V.42 compatible.
There are now some 2400 baud modems which are also V.42bis compliant,
so since the LAP-M gives 4:1 data compression they are advertised as "9600
throughput", which really can be misleading and confusing. Don't be
fooled by any throughput claims. The raw speed is what matters when
transferring compressed files such as ZIPs.
V.42bis
-------
V.42bis is a new CCITT standard for data compression techniques, which
was approved in late 1989. To Support V.42bis, a modem MUST support both
LAP-M and MNP-5, unlike the Standard V.42 in which LAP-M is only an
option. V.42 provides a maximum data compression of 4:1, giving a 9600
bps modem a throughput of up to 38400 bps. MNP only offers 2:1
Compression.
As I said above, data compression is not very useful when transferring
pre-compressed files, (such as ZIPs) from BBS's. V.42bis has a special
ability, (unlike MNP-5) to determine if the file can be compressed further
or not before making the an attempt to do so. Therefore v.42bis will not
slow down a ZIP transfer, and may even speed it up a little bit.
Since V.42bis is implemented in firmware, many V.42 compliant modems
can be upgraded to V.42bis with a new ROM chip.
Speedmodem
----------
A less expensive method of 9600 bps communication can be achieved
without using the CCITTs method of "echo cancellation", so that a digital
signal processor is not needed, making the cost much less expensive. This
method is used on the Compucom Speedmodems. The Speedmodem uses Dynamic
Impedance Stabilization (DIS) to increase the reliability of the telephone
interfaces signal-to-noise ratio of the telephone line by increasing the
clarity and power of the signal, and automatically compensating for
impedance variations on the phone line. This reduces the probability of
line noise, allowing the Protocols to transfer files with less overhead.
It also has a faster fallback rate of 7200 bps if too much line noise
exists for 9600 bps communications. This makes the Speedmodem stand up to
worse line noise conditions at a faster rate than V.32 can handle.
The Speedmodem is available in two versions. the "Speedmodem-Champ",
and also the "Speedmodem-Combo". The Combo is the same modem with the
addition of a 9600 bps Fax, and a Voice-Mail system as well. The Combo
comes with BitFAX by Bitcom, and supports any other 3rd party FAX software
which uses the standard CCITT AT-FAX command set. The Voice-Mail software
is currently still under development, which will allow your computer work
similar to an answering machine, using the hard disk to store voice
messages, and allowing several different message areas or "Mail-Boxes" to
be accessed from a touch tone telephone.
A Data Compression called CSP (CompuCom Speed Protocol) is used to
yield a compression of up to 4:1, giving a throughput of up to 38400 bps.
This however, like MNP5 will not be effective when transferring compressed
files from BBS's, such as ZIP files.
DIS and CPS are proprietary methods owned by CompuCom, Sunnyvale, CA.
Because this modem is very inexpensive more people can afford to buy it,
which could cause it to gain popularity quickly. It is still a new
product, but hundreds of BBS's are showing support for it.
The one drawback to this modem is that it will connect to HST and V.32
modems only at 2400 bps. It will connect to other Speedmodems at 9600
bps, and the Combo version will connect to Fax machines at 4800 or 9600
bps.
What Next?
---------
By mid 1991 the V.32bis standard will be finalized, and by the years
end several 14400 Bps full duplex modems will be on the market. There is
already talk of the CCITT releasing another standard, V.32ter in 1992,
which will be for 19200 bps. Since these modems are expected to cost
considerably more than the V.32s currently on the market, they will be out
of the price range of most BBS users.
WHAT TO LOOK FOR
----------------
THROUGHPUT:
==========
You'll see ads claiming that you can attain 19200 bps or 38400 bps
with a 9600 bps modem - this is true only if you are using MNP5 or other
forms of data compression on uncompressed data or text files. Any 9600
bps modem using compression can transfer at that effective rate. But for
BBS use, where files are already compressed (such as ZIPs, LZHs, GIFs)
MNP5 will actually slow down throughput by attempting to compress a file
that is already compressed. Generally when using a modem for BBS
transfers, its the RAW speed of the Modem and not the throughput which is
important.
Figures of around 1700 cps by the HST modems are attained through
proprietary methods not yet available on other modems.
CONFIGURABILITY:
================
In High Speed Modems, there is a lot more to configure than on a 2400
bps modem. Be sure your modem comes with NVRAM (Non-volatile Random
Access Memory) that can store your modem configuration, making long init
strings unnecessary. Also many modems have dip switches to set the
default configuration, which also simplifies things.
Your Hardware
=============
Can your computer hardware support the speedy new modems at their
highest speed? Can the BBS you are connected to support these speeds?
Generally NO. Most serial ports/Hard Disk combinations can't support over
19,200 baud. Large RS-232 buffers can help and some effort to match the
hard disk performance to the size of the RS-232 buffer would be advisable.
HD caches also help on slower PC systems. Multi-line BBS systems suffer
from time/job splicing further reducing their speed.
Most Modem manufacturers are recommending that MNP5 and V.42bis not be
used (configured off in NVRAM) in BBS systems. There are two reasons for
this, only one is mentioned by the Manufacturer. The first is that ZIP
compressed files don't show any decrease in transfer time since the
V.42bis (4:1) compression can't further compress an already compressed
file. The second is that the majority of the BBS system hardware can't
support a sustained 38,400 baud.
Why offer Modems with transfer speeds over 19,200? High end computer
systems (UNIX and mainframe systems) can and usually do use speeds over
19,200.
PC software usually has an option for 38,400 baud even though most
PC's can't sustain those RS-232 rates. There are HIGH end PC RS-232
boards that can easily handle those speeds especially the EISA designed
boards.
The Atari ST uses a 68901 for it's serial communication. The Midi
port uses a combination of 68901 and a 6850. Several years ago I was
involved in a project to use the MIDI port as a LAN and we needed to find
the maximum transfer rate of the Midi port. Turns out that it's speed is
limited by the interrupt priority determined by the Glue chip and figures
out at 31,500 bits/sec (baud). The serial port has the the same
limitation so no RS-232 speed above 19,200 is available in the Control
panel or in Commercial Software. (The next RS-232 speed above 19,200
would be 38,400 baud and the max RS-232 (hardware rate) is somewhere below
31,000 baud)
The Atari TT for compatibility reasons only supports 19,200 in it's
control panel but one RS-232 port can transfer at 91,000 baud and the
others are surely capable of 38,400. So we should see commercial software
supporting those higher speeds by 92.
If Considering a USRobotics Modem
=================================
You only need to worry about whether you want the HST (which can be
upgraded later to V.32), or the new Dual Standard which is HST, V.32 and
now V.32bis as well.
If Considering a V.32
========================================
Some questions to ask:
Can you afford the USR "DS" instead?
Is it V.42 compatible, V.42 compliant, or V.42bis? compliant
If its not V.42bis or compliant, can it be upgraded?
Do Local/National BBS's support it?
What is the warranty? 5 years?
If Considering a Fax/Modem
==============================
some questions to ask:
Does it both send and receive Fax (some are SEND only)
Does it support 3rd party FAX software?
What's the Fax transfer speed Is it 4800 or 9600 bps?
What's the modem DATA speed?
Does it support MNP, V.42, V.42bis?
Does it support other compression?
Do Local/National BBS's support it?
What is the Warranty? 5 Years?
Modem Compatibility Listing:
---------------------------
These modems will usually be downward compatible with 2400 bps and
slower modems, Which means they are also CITT V.22bis and Bell 103/212A
compatible. Most have an auto-fallback mode that will detect the highest
negotiable bps rate. If the modem is V.42 capable, it will fall back to
MNP if the other modem is not LAP-M capable, but is MNP capable. Modems
supporting MNP will connect with data compression/error correction with
other MNP modems at the highest bps rate common between the two. The
speeds listed here are the actual Raw speed, and not the possible
throughput that can be achieved using data compression.
Listed in alphabetical order by brand name -
Generic V.32 only
Made by a number of companies using the CCITT method of communicating
at 9600 bps.
These are expected to become outdated as V.42 is added to most V.32
modems.
- Talks to other brand V.32 modems at 9600 bps.
Generic V.42 Only
If a modem is V.42 or V.42bis only, and not V.32, then it is only a
2400 bps modem, and can only talk to other V.42 modems at 2400 bps
(with supposed 9600 throughput using data compression) This is not
considered a 9600 bps modem and should be avoided.
- Talks to other brand V.42 modems at 2400 bps with LAP-M.
Generic V.32 with V.42 (and/or V.42bis)
These modems follow CCITT V.32 standard for communicating at 9600 bps,
and also have V.42 data compression and error correction.
- Talks to other brand V.32 modems at 9600 bps
- Talks to other modems with the V.42 option at top negotiable rate.
(Some Generic Brands include:
Anderson Jacobson, Cardinal, Codex, Computer Peripherals, Digicom,
E-Tech, Farallon, Fastcomm, General Datacom, Intel, Magic, Mastercom,
Microcom, Multi-tech, NEC, Practical Peripherals, Prometheus, Radcal
Vadic, Shiva, Telebit, Telenetics, USD, and many others just
appearing. Some of these offer LAP-M and V.42bis, and some do not.)
Hayes V-Series:
The early Hayes V-Series uses a proprietary method of communicating at
9600 bps.
- Talks other Hayes V-Series modems at 9600 bps.
Hayes V-Series V.42:
The Hayes V-Series V.42 uses the proprietary method of communicating
at 9600 Baud but will incorporate the V.42 data compression and error
checking.
- Talks to other V.42 modems at 2400 with error
correction/compression.
Talks to other MNP modems at 2400 using error correction/compression.
Talks to other Hayes V-Series at 9600 bps.
Hayes ULTRA:
Uses CCITT V.32 and method for communicating at 9600 bps.
Has MNP5 abilities.
Has LAP-M abilities
- Talks to Other V.32 modems at 9600 bps
Talks to other modems with the V.42 option at top negotiable rate.
Talks to other Hayes V-Series at 9600 bps
Telebit Trailblazer:
Uses proprietary PEP method of communicating at 9600 bps.
Has MNP5 abilities.
- Talks to other Telebit Trailblazers at 9600 bps.
Talks to other MNP modems at 2400 baud with error correction/
compression
USR Courier V.32:
Uses CCITT V.32 method of communicating at 9600 bps.
offers MNP5 abilities.
- Talks to Other V.32 modems at 9600 bps.
Talks to other modems with the V.42 option at top negotiable rate.
USR Courier HST: (old version)
Uses the USR proprietary HST method of communicating at 9600 Baud.
Has MNP5 abilities.
- Talks to HST type modems at 9600 bps.
USR Courier HST: (current 14400 bps version)
Uses the USR proprietary HST method of communicating at 9600 and 14400
bps.
Has MNP5 abilities.
- Talks to HST DS's at 14400 bps
Talks to HST (current) at 14400 bps
Talks to old 9600 HST's at 9600 bps.
USR Courier HST DS:
The Dual Standard incorporates both the proprietary HST method of
communicating at 9600 and 14400 bps, and the CCITT V.32 method of
communicating at 9600 bps. (and V.32bis 14400 bps on units made after
1/1/1991)
Has MNP5 abilities.
- Talks to Other V.32 modems at 9600 Bps.
(V.32bis models will talk to other V.32bis modems 14400 bps)
Talks to other DS's at 14400 bps
Talks to 14400 HST's at 14400 bps
Talks to old 9600 HST's at 9600 bps.
COMPUcom Speedmodem
Uses the Proprietary DIS method of communicating at 9600 bps.
Has 7200 and 4800 bps Fallback
(Speedmodem-Combo Has CCITT FAX V.27ter & V.29)
Has MNP5 abilities.
Has CSP abilities.
(Speedmodem-Combo) Talks to Group III Faxs at 9600.
-Talks to other Speedmodems at 9600 bps.
Talks to other MNP modems at 2400 bps with error correction/
compression
------------------------------------------------------------------------
Manufacturer Toll Free Charge Call Support BBS
============ ============== ============== ==============
Anchor (800) 541-2318
Anderson Jacobson (800) 438-8520 (408) 435-8520
Cardinal (717) 293-3000
Codex (508) 261-4000
Compucom (800) 228-6648 (408) 732-4500 (408) 738-4990
Computer Peripherals (800) 854-7600 (805) 499-5751 (805) 499-9646
Digicom (800) 574-2730
E-Tech (408) 982-0270
Farallon (415) 596-9100
Fastcomm (800) 521-2496 (703) 620 3900
General Datacom (203) 574-1118
Hayes (800) 241-9625 (404) 441-1617 (800) 874-2937
Intel (800) 538-3373 (503) 645-6275
Magic Modems (800) 622-3475
Mastercom (213) 834-6666
Microcomm (800) 822-8224 (617) 551-1000
Multi-Tech (800) 328-9717
NEC (800) 222-4632 (408) 433-1250
Practical Peripherals (800) 442-4774 (818) 706-0333
Promethues (800) 477-3473 (503) 624-0571
Radcal Vadic (800) 482-3427 (408) 432-8008
Radcal Milgo (800) 327-7909 (305) 846-1601
Shiva (800) 458-3550 (617) 864-8500
Telebit (800) 835-3248 (408) 734-4333
Telenetics (800) 822-4267 (714) 779-2766
USD (800) 631-4869 (205) 430-8000
USRobotics (800) DIAL-USR (708) 982-5001 (708) 982-5092
Price Comparisons
=================
Many Modem Manufactures offer BBS Sysop special prices directly, at
50% off retail price. Then the Sysop must agree to use the Modem on the
BBS for some set amount of time, and include a banner in the logon screen
mentioning the presence of the modem.
Generic Brands Retail Sysop
V.32 Only EXT $650-$1,000 ????
V.32/V.42 EXT $700-$1,000 ????
V.32/V.42bis EXT $700-$1,200 $339+
Software Included: Varies (most externals come without software) Warranty:
Varies 1-5 years
Cardinal
--------
V.32/V.42bis MNP 5 EXT $350-$400 $300+
9600, 4800, 2400, 1200, 300, 1200/75 Baud Rates
V.32, V.22bis, V.22, V.21, Bell 103 & 212A Standards
AT Command set with Extensions, NVRAM, Auto Speed Conversion/Adaptive
circuitry.
Software Included: None
Warranty: 1 year
Hayes Retail Sysop
------------------------------------------
Ultra V.32/V.42 $1,199 $599
V-Series V.42 (not V.32) $999 $499
V-Series 9600 $799 $399
Software Included: None
Warranty: 2 years
COMPUcom Retail Sysop
------------------------------------------
Speedmodem Champ (INT) $169 N/A
Speedmodem Combo (INT) $279 $169
The Combo includes BitFax and Voice-Mail software
Warranty: 5 years
Intel Retail Sysop
------------------------------------------
9600EX $799 $399
Software included: None
Warranty: 5 years
Practical Peripherals Retail Sysop
------------------------------------------
V.32/V.42 EXT $699 $339
V.32/V.42 INT N/A N/A
Software Included: None
Warranty: 5 Years
Note: Originally these modems had several incompatibilities with other
V.32 modems such as USR. I'm told that P.P. has now fixed the bugs, and
is now shipping a reliable product.
Telebit Retail Sysop
--------------------------------------------
T1000 ??? ???
T1500 V.32 ??? ???
TrailBlazer INT ??? ???
Trailblazer EXT ??? ???
T2500 V.32/V.42 ??? ???
(anyone have info on these?)
Warranty: 5 years
USRobotics Retail SysOp
--------------------------------------------
Courier Dual Standard E $1,595 $699
Courier Dual Standard I $1,395 $649
Courier V.32/V.42 EXT $1,099 $599
Courier V.32/V.42 INT $949 $577
Courier HST 14.4 EXT $995 $449
Courier HST 14.4 INT $895 $405
DS Upgrade Kit for HST EXT $599 $300
DS Upgrade Kit for HST INT $499 $250
Software included: None
Warranty: 2 Years (extended warranties available for $25 per year)
Document updates:
Date Release Comments
---- ------- --------
10/30/90 1.0 Initial Release. Should have run a spell checker!
11/08/90 1.1 Spelling fixes, V.32bis update, Speedmodem update
01/10/91 1.2 USR V.32bis Update, other minor corrections
01/15/91 1.3 USR V.32bis corrections, Speedmodem update, more
spelling
fixes. Thanks to Remco Treffcorn
02/13/91 1.4 Minor corrections, thanks to Bill Garfield
________________________________________________________
> STR Portfolio News & Information Keeping up to date...
================================
THE ATARI PORTFOLIO FORUM
=========================
On CompuServe
by Judith Hamner 72257,271
Discussion on the forum message board centered on the topic of how
information should be distributed. Don Thomas posted a special price offer
on the developer's technical reference manual. Several members objected
to the non-disclosure agreement required of developers. A very intense
debate on the subject ensued. An interesting sideline of the discussion
was the proposal for a "hacker's guide" for the Port.
David Stewart had a special offer of his own for a forthcoming
spellchecker on ramcard. There were also some favorable comments from
membars about David's newsletter Re:Port. David has posted a price list
for his Port products in the library. Look for REPRIC.DOC. SPELL2.TXT
contains details of the spell checker offer.
Several requests for help from new users prompted discussion of the
best methods for file transfer between the Port and an ST or Mac. This
discussion always seems to produce new ideas. There are also several
products dedicated to easing this transition.
More members have purchased Flashdrives to use with their Port and
other DOS computers. The inital reaction is that these little units are
very useful for expanding storage. Steve Schlanger reported that BSE is
working to try to interface with some other palmtops.
Larry Land reported on an ad for an A/D datalogger peripheral. David
Hayden has been collecting information for a forthcoming article on
battery life. Some very interesting information has been shared in
COmmunity Square.
______________________________________________________
> STReport CONFIDENTIAL "ATARI NEWS FIRST!"
=====================
- New York City, NY MEGA STE 1 -> HOBBLED!
-------------------
Seems the hardisk compartment is not capable of accepting an
installation of a hard disk mechanism. Hmmm the electronics are not there
either. What's this? It looks like an instant replay of the "mutha
board" episode of last year. Remember?? The mega ST 2 that was
intentionally made almost impossible to upgrade to 4 megs?? Well the
"Troll of Misery" at Atari is at it again. The Mega STe has what we will
affectionately call the "Mutha Cover". It, the cover for the hard drive
comparrtment will not allow the installation of a hard drive. Unless, of
course, one purchases and uses the Atari installation kit. Which by the
way, is NOT available. Why Atari?? Why this footshot now? Didn't yo
learn anything from the 'mutha board' episode? tsk, tsk, tsk.
- Palatine, IL MISSION SOFTWARE RELEASES NEW DRIVER
------------
Missionware Software (software with a mission) now has:
>>> DeskJet 500 <<<
A text printer driver available for: *** Printer Initializer ***
This text driver was written by Bob Carpenter for Missionware Software and
has been fully tested with a DeskJet 500. Look for it as file "DJ500.PDT"
(It's a very short file and therefore not compressed.)
What *is* Printer Initializer? It's the "Ultimate" printer control
accessory developed by Missionware Software to help *you* better control
your printers. With it, you can create your own text drivers!
* Completely user customizable (but comes standard with drivers for
Epson, Diconix and now DeskJet printers.)
* Controls any printer on either the serial or parallel port...
* Permits control of up to 6 printers from 1 desk accessory slot...
* Works with any GEM program...
* Permits you to easily and conveniently send commands to your printer
for selecting fonts, styles, pitch and point sizes, type output,
line feeds, carriage returns, line spacings; in essance, you can
easily control *anything* your printer can do from this one program
without having to embed control codes in the host program!
* The program comes with a special install program that creates the
drivers and a desk accessory that later users the drivers for printer
control.
* The programs work in either color or monochrome...
* The desk accessory is fully compatible with MultiDesk (Copyright
CodeHead Software)...
* Our programs are not copy protected (they are serialized and
personalized!) and are installable on your hard disk...
* The program, with the DJ500 driver, is now available for $24.95
direct from Missionware Software or your favorite dealer. If not in
stock, have your dealer order from Pacific Software Supply, our
number one distributor.
* If you don't own an Epson or Diconix or DeskJet, you can still
create your own drivers for whatever type of printer you have.
Missionware will also help you create a driver for free. Just
contact us directly either via the mail or on-line.
Our address is: Missionware Software
354 N. Winston Drive
Palatine, IL 60067-4132
Personal checks, money orders and bank checks are acceptable.
If you'd like to contact us online, we're on BIX (jtrautschold), CIS
(73250,572) and GEnie (J.TRAUTSCHOL). We also have demos available on all
3 services. Look for the file PRT_INIT.ARC for a fully functional driver
install demo and tutorial (save function is disabled and the desk
accessory is not included.).
We look forward to helping *you* better utilize *your* printer...Use it to
it's fullest potential! For $24.95, you can't afford not to!
- San Diego, CA HOLOBYTE NOT HAPPY
-------------
Hate to say this, but if the Atari ST version of Flight of the
Intruder sells as many copies in the next 3 months that it sold the first
month (which is usually the strongest month), we won't even make back the
cost of testing the gaem -- let alone development. Check with me in a few
months if you're interested in how many copies we would sell.
Essentially, the number is so small that even if we could sell an equal
number of copies to STE owners, it wouldn't be worth the extra cost of
programming.
No.19
- TEL-AVIV, ISRAEL ISRAEL'S READY... IS ATARI?
----------------
1073.3.16743.1 Atari Israeli factory, bankruptcy? 9/6/91 18:33 36/1838
bill@mwca.UUCP (Bill Sheppard) Lines 1 to 14 of 36 (38%)
---I thought this might be of some general interest (don't kill the
messenger!):
Northern California Jewish Bulletin, 9/6/91, page 16:
"Israel finally OKs Atari deal, waiting for Tramiel"
"After months of haggling and intrigue, Atari and Israel have cleared
what may be the final hurdle allowing the computer company to set up a
plant in Israel - but snags and wild rumors still persist. "The Israeli
Cabinet gave its OK Sunday to the final phase of a deal for Atari to build
a $150 million computer-parts plant there."
The article continues giving the troubled history of the deal,
detailing the specifics of the factory and associated investment company,
and various accusations of foot-dragging on both sides.
Continuing:
"Meanwhile, a new twist further casts the deal in doubt - a rumor that
Atari will file for bankruptcy. "[Israeli] Treasury officials said Sunday
that an investigation by the accountant-general showed the computer giant
is close to bankruptcy - placing doubt on whether the government will
receive any returns from its generous package of grants and tax breaks to
the factory." .. "Investment analysts in the Bay Area who follow Atari
stock were entirely unaware of the Israeli Treasury report that Atari may
go belly-up; Lee Isgur, an analyst at Volte and Welty and Co. laughed at
the possibility - which he considered absurd - of Atari folding. "'If it
were true, then their financial statement [released in early August] would
be fallacious and they would be in jail,' said Isgur." --
1073.3.16743.2 Re: Atari Israeli factory, bankruptcy?
9/8/91 18:06 40/2541 saj@chinet.chi.il.us (Stephen Jacobs)
There are some interesting points here which are worth kicking around.
The first is that Lee Isgur was an unfortunate choice as an expert, since
he's an old Atari fan, and I believe he is or was a fairly big
stockholder. The next is that while Atari is clearly sick, the assets (on
paper) are so much greater than the liabilities (on paper) that bankruptcy
seems out of the question. Basically, after the Federated deal collapsed,
Atari was financially a burnt-out shell. Now that it's generally back on
its feet (although a lot smaller), it would be silly to ask for court
protection.
But there's a VERY interesting complication: Atari's second-biggest
stock-holder, and a major creditor, is Warner Communications (or
Time-Warner.. It can get confusing keeping up with company names
sometimes), a company that's in VERY SERIOUS trouble. That probably has a
lot to do with Atari's bond repurchases in the last year: Warner needed
cash now, rather than more cash later. If Warner's position in Atari was
turned over to trustees, interesting (and not necessarily pleasant) things
might happen.
Were Atari to file for bankruptcy any time soon, not only would the
recent financial statement look like fraud, the bond repurchases would
look like looting of the assets by insiders. The courts frown on that,
too.
So given that the really nasty work of the last couple years is over,
and that a bankruptcy would invite multiple legal problems, I think we'll
have Atari to kick around for a couple more years, at least.
Steve saj@chinet.chi.il.us
- Dallas, TX THE CAGLE EXPOSE!
----------
CTSY FNET
Conf : ST Report
Msg# : 14763/14771 Lines: Extended Read: 200
Sent : Sep 11, 1991 at 5:19 PM
To : All
From : Nathan Prichard at The Melting Pot BBS, Dallas,TX
Subj : Atari's BBS?
For some interesting comments from the former sysop of Atari's
BBS, here is a recent message from that same BBS.
-------------------------------------------
Message : 20049 [Open] 9-10-91 3:49pm
From : David Cagle
To : Mike Adey
Subject : #20024 BBS Program trouble
Sig(s) : 1 (General)
When I started at Atari's End-User Technical Support area (in March
1990) There was one other tech person and 8 people in the Customer
Relations department. My job was to help people with ANY of the products
that Atari made (ranging from the original 2600 game machines up to the TT
computers). Starting last October, the Customer Relations department lost
some people because they had decided to leave the area. That cut the
department down to about 5 people. Then in January '91, they took two
people out of the department and moved them to different departments in
the company, thus leaving 3 people in the department which is the main
link with the customer.
In mid-June, they laid-off one of the 3 people left in the department.
That left 2 people to man the phones and take care of all the orders that
were coming into the company from the customers that either couldn't find
a dealer in their area or had dealers but the dealer didn't have any stock
to sell them.
While all this was happening, they laid off the only other tech, thus
making me the only end-user tech (that happened in Aug '90).
Then, in July, one of the last two Customer Relations people announced
that he was going to go back to college and that he would be gone in
Mid-Aug. Plans were made to get one of the people who had left the
department back in January (and had then been laid off by the company in
June) to come back and fill the vacancy. This plan was vetoed by Sam
Tramiel. His reason being that the company had lost money during the
previous quarter and that we had to cut back.
With 600 calls coming into a department on a DAILY basis, plus having
hundres of orders to handle during a week, it was decided that the
technical support position would be phased out and I would be moved into
Customer Relations. At this point we had over a month and a half of
processed orders that needed to be filed and many months of inquiry
letters needing to be answered, but we didn't have time to get to them
during a standard 8-hr shift because we were constantly answering the
incoming calls. We told of this, Sam Tramiel indicated that if we
couldn't get the job done in the normal shift, either take the stuff home
and do it there or stay late... but you won't be getting any over-time pay
for this because "we have to start running this comapny like a Japanese
company, and Japanese employees stay late all the time for no extra pay."
At this point, both myself and the other gentleman in the department
started looking for new positions elsewhere. He left the company on Aug.
30th and I left the company on Sept. 6th. I have no idea what's going on
at Atari at this point.
Having used Atari computers for that last decade as my personal
computer of choice, this really hit me hard. But... I felt that it was the
best thing for me to do. I had been with the company for 18 months and I
had never received a review of my work with the company.
I will continue to push the Lynx game system as the hand-held game of
choice, but I am seriously considering phasing out my Atari computer
system at home for an IBM PC clone.
I hope this explains everything... if you have any questions, drop me
a line here or on GEnie. My mail address there is ROBOCOP.
EDITOR NOTE:
============
"In Japan....." Gimme a break!!!! This is the USA Sam! Just in
case you hadn't noticed! You know, the country where most of your
company's stockholders are. Come to think of it, why don't you try
following some of the better known Japanese Customs practiced in the
Japanese business community?
Also (FYI) in Japan, the average lifespan of loyal, dedicated
employees is much shorter than in the USA. This is a direct result of the
exploitation of the human resource in Japan. Is this what you are
alluding to?? You want MORE outta your loyal workers and wish to pay them
less?? TRY STARTING AT THE TOP!
Also in Japan, as one industry leader in the Atari Community remarked
after reading this note, HARI-KARI for failures, is a traditional Japanese
practice.
- Orem, UT WORD PERFECT SEZ IT LIKE IT IS!
--------
Dear ......
Thank you for your letter about WordPerfect Corporation's Atari
development. I understand your concern.
Each product we produce is set up as its own profit center. The
revenues from the product must be able to support the resources dedicated
to it. When we first started working on the Atari version we hoped that it
would do well and be able to support ongoing improvements. This has not
been the case. Though it would be nice to have the full 5.0 functionality
in the Atari product, the revenues recieved are not enough to finance a
full-fledged 5.0 development effort.
Although we have not been able to upgrade the Atari version of
WordPerfect as we have the DOS version, we continue to support version 4.1
with toll-free customer support and occasional updates with necessary
corrections. We hope that WordPerfect 4.1 for the Atari will continue to
be of use to the Atari community.
I am recieving quite a few letters like the one you sent. Perhaps you
could pass this information along to other with similar concerns.
I hope you continue to enjoy using WordPerfect for the Atari. If you
have further questions or concerns, please write again or call me at (801)
228- 5004.
Sincerely,
Liz Tanner Corporate Communications
__________________________________________________
> XTRA-RAM STR InfoFil eXtra-RAM Deluxe, a SOLDERLESS memory upgrade
=====================
XTRA-RAM Deluxe
===============
Upgrade any ST using inexpensive SIMMs
PDC proudly announces the release of the Xtra-RAM Deluxe, a SOLDERLESS
memory upgrade board that works on all STs and uses new cutting edge
technology.
Xtra-RAM Deluxe allows ST users to upgrade their machines using
inexpensive SIMM boards. Xtra-RAM Deluxe boards are fully compatible with
all STs, including the older ones with weak MMUs (a special adaptor is
included for those machines).
The Xtra-RAM Deluxe retails for $169.95 (unpopulated, without memory)
and is available through dealers nationwide. PDC is offering Xtra-RAM
Deluxes at a special rate of $139.95 for a limited time. Also available
are 2MB and 4MB versions at the special rate of $259.95 and $369.95
respectively.
The Xtra-RAM boards are high quality memory upgrades that have been
proven again and again with over 10,000 satisfed customers around the
world.
PDC
4320-196th SW, Ste. B-140
Lynnwood, WA 98036
206-745-5980 - Call if you have any questions
800-255-8220 - Call to place an order anytime
____________________________________________________________
> Hard Disks STR InfoFile ***** ABCO SUMMER '91 SPECIALS! *****
=======================
** EFFECTIVE IMMEDIATELY! **
ABCO COMPUTER ELECTRONICS INC.
P.O. Box 6672 Jacksonville, Florida 32236-6672
Est. 1985
_________________________________________
Voice: 904-783-3319 10 AM - 4 PM EDT
BBS: 904-786-4176 12-24-96 HST
FAX: 904-783-3319 12 PM - 6 AM EDT
_________________________________________
HARD DISK SYSTEMS TO FIT EVERY BUDGET
_________________________________________
All systems are complete and ready to use, included at NO EXTRA COST
are clock/calendar and cooling blower(s).
*-ALL ABCO HARD DISK SYSTEMS ARE FULLY EXPANDABLE-*
(you are NOT limited to two drives ONLY!)
(all cables and connectors installed)
* ICD HOST ADAPTERS USED EXCLUSIVELY * OMTI HIGH SPEED CONTROLLERS *
* ICD ADSCSI+ HOST ADAPTERS * FULL SCSI COMMAND SET SUPPORTED *
* SCSI EMBEDDED CONTROLLER MECHANISMS *
WE PAY SHIPPING!!! >BLUE LABEL UPS!<
Deluxe 2 bay Cabinet w/65w auto-switching PS
TIME PROVEN to be the most reliable!
Model Description Autopark Price
==================================================
SGN4951 51Mb 24ms 3.5" Y 479.00
SGN1096 85Mb 24ms 5.25" Y 549.00
SGN2055 105mb 12ms 3.5" Y 649.00
SGN6277 120Mb 12ms 3.5" Y 789.00
SGN1296 170Mb 12ms 3.5" Y 1019.00
==================================================
FULLY ASSEMBLED SCSI DRIVES DEDUCT $60.00
ADD $35.00 for 4 BAY SUPER CABINET w/250+w PS
EXOTIC TOWER CABINETS AVAIALABLE Call for Info!
PLEASE NOTE: The above is partial listing only!
CPU ACCELERATOR & MEMORY UPGRADES AVAILABLE & INSTALLED
>> ABCO is now taking orders for 1040 & MEGA STe Computers! <<
Call for VERY special Introductory prices!
ATARI COMPUTERS * STILL THE BEST VALUE!
If you don't see what you want listed here, call us.
Odds are we have it or, can get it for you!
AT THE BEST POSSIBLE PRICE!
"We service what we sell. (IF necessary)"
****** SPECIAL - SPECIAL ******
* SYQUEST 44MB (#555) >> ABCO "44" << REMOVABLE MEDIA DRIVE *
- SYQUEST 44 MB DRIVE - ICD ST ADSCSI PLUS H/A
- ICD Utility Software - 3' DMA Cable
- Fan & Clock - Multi-Unit Power Supply
(1) 44 MB Syquest Cart.
--->> SPECIAL! NOW ONLY __$ 645.00__ <<---
**** SCSI UNITS -> ONLY $585.00 ****
WE PAY SHIPPING!!! >BLUE LABEL UPS!<
COMPLETELY ASSEMBLED AND READY TO RUN!
Cart and Utility Software Included!
EXTRA CARTS: $ 74.50
DRIVE MECH ONLY: $ 349.95
****** SPECIAL - SPECIAL ******
* TWIN SYQUEST 44MB REMOVABLE MEDIA DRIVES ... PROGRAMMER'S DELIGHT *
SPECIALLY PRICED ** $1019.00 **
Includes TWO cartridges!
* SYQUEST 44MB REMOVABLE MEDIA DRIVE AND HARD DRIVE COMBINATIONS *
- Syquest 44 Model [555] and the following hard drives -
50mb SQG51 $ 819.00 85mb SQG96 $ 1019.00
LOWBOY - STANDARD - DUAL BLOWER CABINETS
CUSTOM CONFIGURATIONS AVAILABLE
WE PAY SHIPPING!!! >BLUE LABEL UPS!<
Listed above are a sampling of the systems available.
Prices also reflect various cabinet/power supply configurations
(over sixty configurations are available, flexibility is unlimited)
ALL UNITS COMPATIBLE WITH --> SUPERCHARGER - AT/PC SPEED - GCR
LARGER units are available - (Custom Configurations)
*>> NO REPACKS OR REFURBS USED! <<*
- Custom Walnut WOODEN Cabinets - TOWER - AT - XT Cabinets -
* SLM 804 Replacement Toner Cartridge Kits $36.95 *
* Toner Starter Kits $59.95 *
* Replacement Drums $179.95 *
>> MANY other ATARI related products STOCKED <<
ALL POWER SUPPLIES UL APPROVED
-* 12 month FULL Guarantee *-
(A FULL YEAR of COVERAGE)
WE PAY SHIPPING!!! >BLUE LABEL UPS!<
QUANTITY & USERGROUP DISCOUNTS AVAILABLE!
_________________________________________
DEALERS and DISTRIBUTORS WANTED!
please, call for details
Personal and Company Checks are accepted.
ORDER YOUR NEW UNIT TODAY!
CALL: 1-800-562-4037 -=**=- CALL: 1-904-783-3319
Customer Orders ONLY Customer Service
9am - 8pm EDT
Tues thru Sat
ABCO is EXPANDING!! CALL FOR INFORMATION!
____________________________________________________________
> A "Quotable Quote" STReport's Editorial "Cartoon"
==================
"Doing business without advertising
is
like winking at a girl in the dark.....
You know what you are doing, but nobody else does..."
.... a wise and prudent observer
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
STReport International Online Magazine
Available through more than 10,000 Private BBS systems WorldWide!
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
STReport "YOUR INDEPENDENT NEWS SOURCE" September 13, 1991
16/32bit Magazine copyright 1987-91 No.7.37
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
Views, Opinions and Articles Presented herein are not necessarily those of
the editors/staff, PCReport, STReport, AMReport, MCReport. Permission to
reprint articles is hereby granted, unless otherwise noted. Each reprint
must include the name of the publication, date, issue # and the author's
name. The entire publication and/or portions therein may not be edited in
any way without prior written permission. The entire contents, at the
time of publication, are believed to be reasonably accurate. The editors,
contributors and/or staff are not responsible for the use/misuse of infor-
mation contained herein or the results obtained therefrom.
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
