Copy Link
Add to Bookmark
Report
Info-Atari16 Digest Vol. 91 Issue 261
Info-Atari16 Digest Thu, 9 May 91 Volume 91 : Issue 261
Today's Topics:
4 meg 1040STE vs Mega4STE
Atari MegaST BUSS - Pinouts
Converting Sparcstation .au files to Mac/Atari format
GEMINI
MODEM FOR SALE
STalker/VAX/Mass-11
ST SOFTWARE FOR SALE
ST systems for sale
Tank Battle game (saw on PC)
Timeworks DTP upgrades
TOS Command Line (3 msgs)
Which monitors can use TT high res? (2 msgs)
WordPerfect update - STe support
Welcome to the Info-Atari16 Digest. The configuration for the automatic
cross-posting to/from Usenet is getting closer, but still getting thrashed
out. Please send notifications about broken digests or bogus messages
to Info-Atari16-Request@NAUCSE.CSE.NAU.EDU.
Please send requests for un/subscription and other administrivia to
Info-Atari16-Request, *NOT* Info-Atari16. Requests that go to the list
instead of the moderators are likely to be lost or ignored.
If you want to unsubscribe, and you're receiving the digest indirectly
from someplace (usually a BITNET host) that redistributes it, please
contact the redistributor, not us.
----------------------------------------------------------------------
Date: 9 May 91 19:25:34 GMT
From:
arizona.edu!cerritos.edu!nic.csu.net!usc!zaphod.mps.ohio-state.edu!know!daemon@
arizona.edu
Subject: 4 meg 1040STE vs Mega4STE
To: Info-Atari16@naucse.cse.nau.edu
Netters were asking about the difference between a 4 meg 1040STE and the
Mega4STE. Since I am an Atari dealer, I feel qualified to answer this one.
I retail the 1040STE with an SM124 monitor for $CDN 679. To boost this to 4
megs costs about another $CDN200. Since external hard disks are a must,
adding an ICD FA.ST 85 costs $CDN 999. Total cost for the system (8 MHz,
TOS 1.6) = $1878.
I retail the Mega1STE with SM124 for $CDN1079. For an additional $CDN 699, the
buyer gets an ICD host adapter, an 85 meg Seagate ST1096N and 4 megs or RAM
for a total cost of $CDN1778, cheaper than the 1040 system because it costs a
lot less for an internal HD. This system also has a detached keyboard, a 16
MHz CPU and TOS 2.n. Best of all, with the VME slot, there are many boards,
such as video cards, that are available for the MegaSTE (see ZNET posting
91-15 or 91-16, cannot remember which one).
The Mega4STE with a 48 meg SCSI bundled from Atari sells for $CDN 1879 because
it costs me more to buy this bundle from Atari than it does to build my own
systems.
I recommend the purchase of a Mega STE unless the user wants to stick with
a floppy system.
Finally, this posting is not for commercial purposes, therefore, I have not
mentioned my company name. It was posted for information only to help
netters make informed choices.
------------------------------
Date: 9 May 91 22:26:49 GMT
From:
arizona.edu!cerritos.edu!nic.csu.net!usc!samsung!munnari.oz.au!bruce!monu0.cc.m
onash.edu.au!monu6!rdt154k@arizona.edu (mr n benci)
Subject: Atari MegaST BUSS - Pinouts
To: Info-Atari16@naucse.cse.nau.edu
As there has been some discussion on the Mega ST internal bus of late
the following post briefly details the bus connections and what each
pins function is. Refer to any MC68000 data book for more info.
What is presented has been abreviated slightly but no
vital information was edited out. The whole document runs for about 10
pages, most of it esoteric, dealing with Atari's reasons for the bus and
copyright info plus a lengthy Introduction on the design of the bus. No real
information. Hope this is of help. If you have any queries please don't
hesitate to call me. Best of luck.
As to whether this is legal or not - I don't know. If problems do arise
as to the legality please inform me as I don't want to cause any serious
problems. Some parts are copied (ie; typed in by hand, by myself) verbatim
from the original documents.
---------------------------<cut here>---------------------------------------
Atari Mega ST internal bus.
Mechanical Description:
Two sizes of expansion card are supported. One, the half card
is half the depth of the Mega St unit. The other, the full
card is the full depth of the unit. In either case, the card
butts up to the rear panel of the St unit which has been provided with a
removeable hatch through which connectors and/or cables can be mounted.
The expansion card connects to the St motherboard through a 64
pin connector mounted on the bottom (solder) side of the expansion board.
This connector plugs directly into its mate mounted on the motherboard.
Standoffs, 25mm in length, are mounted into the bottom case through the
motherboard. the expansion card is then screwed down to the standoffs.
The standoffs and screws are not supplied with the Mega St and thus should
be included with the expansion card. A hole located in the left rear of
the expansion card fits around a plastic stud to provide extra strain
relief for rear mounting connectors (See diagrams).
Electrical Description:
The signals provided on the 64 pin connector are essentially the
pins of the 68000 processor. These signals are all unbuffered. They are
intended to drive one LS TTL load on the expansion board. driving more than
one load or driving excessive capacitance may cause imporper St operation.
For this reason it is not acceptable to connect to the expansion connector
in any manner other than the one outlined in the previous section (e.g.
connecting directly with a cable is not acceptable.
The bus may be arbitrated away from the processor using the normal
68000 protocol. However, the bus grant signal provided on the connector is
the end of the daisy chain. Response time will be effected by the DMA going
on in the system (e.g. disk activity, hardware bit-blt transfers, etc). If
the peripheral requires DMA to occur while interrupts are enabled, care must
be taken to limit the transfers to bursts of less than about 50 bus cycles
allowing adequate time between bursts to process the interupts.
The timing of the bus is that of any 8Mhz 68k processor. Since the
signals provided are essentially the processor pins, connecting peripherals
in the same manner as you would to any 8Mhz 68k should work with no problem.
DMA is the exception. The bus cycle produced even while the bus is arbitrated
away from the processor must look exactly like an 8Mhz 68k bus cycle. This
constraint is necessary to provide the proper sharing of the memory between
the processor and the video. In all transfers, DTACK must be provided/sampled
as required by the 68k processor specification. Also, transfers may not last
more than 64 clock cycles. The St will automatically generate a bus error if
AS is held low for more than 64 clock cycles.
The following diagram shows a top view of the connector on the
motherboard with its associated pin numbers and signal names. This connector
(TRW no. 009-00002-8, JAE no. ME03-R64P-D4T2-A1 or equivalent) is the male
side. The expansion board uses the female side (TRW no. 009-00005-6, JAE no.
ME03-64S-D4R1-A1 or equivalent).
____
d4 (1) . . (2) d5
d3 (3) . . (4) d6
d2 (5) . . (6) d7
d1 (7) . . (8) d8
d0 (9) . . (10) d9
/AS (11) . . (12) d10
/UDS (13) . . (14) d11
/LDS (15) . . (16) d12
R//W (17) . . (18) d13
/DTACK (19) . . (20) d14
/BG (21) . . (22) d15
/BGACK (23) . . (24) GND
/BR (25) . . (26) a23
GND (27) . . (28) a22
CLK (29) . . (30) a21
GND (31) . . (32) GND
/HALT (33) . . (34) a20
/RESET (35) . . (36) a19
/VMA (37) . . (38) a18
E (39) . . (40) a17
/VPA (41) . . (42) a16
/BERR (43) . . (44) a15
/NMI (45) . . (46) a14
/INT-5 (47) . . (48) a13
/INT-3 (49) . . (50) a12
FC2 (51) . . (52) a11
FC1 (53) . . (54) a10
FC0 (55) . . (56) a9
a1 (57) . . (58) a8
a2 (59) . . (60) a7
a3 (61) . . (62) a6
a4 (63) . . (64) a5
----
<front of ST rear of ST>
Top view of motherboard connector.
The following is a brief description of each signal on the connector.
For more detailed info consult a 68000 processor manual.
CLK
This signal is an 8.0106Mhz TTL compatible, 50% duty cycle square wave.
/RESET, /HALT
In combination these two signals can be used to indicate a system
reset. The /RESET can be used by itself to indicate a system or s/w
reset (RESET instruction executed). These are both bidirectional
(open collector) signal terminated on the motherboard with a 1K and
a 4K7 pullup respectively. They may be driven according to standard
68000 processor timing to acheive the functions of the 68000's
/RESET and /HALT lines.
A system reset will occur at powerup and any time the reset switch
is pressed. It causes both lines to go low for at least 1ms. A
software reset will cause only the /RESET line to go low for
approximately 15us.
A1-A23
These lines provide the 23-bit address directly from the 68000
processor. Terminated with 4K7 pullups on the motherboard.
D0-D15
16 bit bidirectional data bus. Terminated with 10K pullups on the
motherboard.
FC0, FC1, FC2
These lines indicate the processor status for the current bus cycle.
They are directly driven by the 68000 processor. Terminated by 10K
pullups on the motherboard.
/AS
When low, indicates valid address on address bus. Terminated with
4K7 pullups on motherboard.
R//W
When high, processor is doing a read. When low, processor is doing
A write. Terminated with 4K7 pullups on motherboard.
/UDS, /LDS
/UDS indicates upper 8 bits, ie; D8-D15. /LDS indicates lower 8 bits,
ie; D0-D7. Terminated with 4K7 pullups on motherboard.
/DTACK
Bidirectional signal used to indicate a completed data transfer.
Terminated on motherboard with a 1K pullup
/BERR
Used to tell the processor or DMA device that no peripheral device
has reponded to the current bus cycle. The ST will automatically
generate this signal if a bus cycle does not complete within 64 clock
cycles. Terminated on motherboard with 4K7 pullup.
E
Enable clock used for 6800 peripherals. 60/40 duty cycle.
/VPA
Open collector line used to indicate that a 6800 type cycle should
be executed. Terminated by 4K7 pullup.
/VMA
This signal is used to synchronise 6800 type bus transfers with the
E clock.
/BR
Indicates that the bus will be released at the end of the current
bus cycle. This signal is daisy chained through the other DMA
devices on the motherboard, it does not come directly from the
processor.
/BGACK
Open collector signal used by a DMA device to claim bus mastership.
Terminated by 4K7 pullup on motherboard. Should also be terminated
on expansion board with another 4K7 pullup.
/NMI, /INT-5, /INT-3
These signals are used to asynchronously generate a level 7, level 5
or level 3 interrupt. These are the only levels which can be generated
externally. If they all occur simultaneously, the highest priority
(level 7) will be acknowledged first. The expansion card is responsible
for responding to any interrupt acknowledges for interrupts which it
generates. These acknowledges can be either vectored or auto-vectored.
All three lines are terminated by a 1K pullup on the motherboard.
Power:
Power is supplied to the expansion card through a pigtail cable which
plugs onto a six pin connector on the motherboard. The connector on the mother-
board is AMP no. 171825-6. The mating connector on the pigtail from the
expansion borad is AMP no. 171822-6. The drive capabilities are as follows;
PIN 1 - +5VDC @ 750mA
PIN 2 - +5VDC
PIN 3 - GND
PIN 4 - GND
PIN 5 - GND
PIN 6 - +12VDC @ 500mA
Software Considerations:
The mediation of available addresses should not be necessary since only
one expansion card may be plugged in at any one time. Atari has set aside the
addresses C00000 through CFFFFF, FF0000 through FF7FFF and FFFE00 through
FFFFFD for use by outside developers. Spurious accesses to FFFFFE/FFFFFF may be
generated.
You can't add RAM which will work as video memory and/or will allow
DMA. Also if memory is extended on the expansion card, the operating system
will not clear it or allow it to be allocated.
--------------------------------<cut here>------------------------------------
------------------------------------------------------------------------------
* Nino Benci. * Confucious say *
* Monash University, Caulfield Campus * 'Never stand alone against *
* Physics Department * against ignorance' *
* 900 Dandenong Rd, Caulfield East * *
* VIC, 3145. Tel (03) 573 2355/2519 * *
* Australia * *
* email oz: rdt154k@monu6.cc.monash.oz.au *
* email world: rdt154k%monu6.cc.monash.edu.au@uunet.uu.net *
------------------------------------------------------------------------------
------------------------------
Date: 9 May 91 15:42:04 GMT
From:
noao!ncar!elroy.jpl.nasa.gov!sdd.hp.com!wuarchive!udel!haven.umd.edu!wam.umd.ed
u!dmb@arizona.edu (David M. Baggett)
Subject: Converting Sparcstation .au files to Mac/Atari format
To: Info-Atari16@naucse.cse.nau.edu
In article <1991May8.055008.2758@isc.rit.edu> drp9500@isc.rit.edu (D.R. Paradis
) writes:
>sound files with the .au extender are Sun Audio files.
>
>As of now I cannot figure how to convert them into ANY format that the
>ST can handle. :-(
The Atari uses the same sample data format as the Mac, so if there's
a way to convert Sparcstation samples to Mac format, you can use
them (the data forks) on the Atari as well.
Could some kind Mac wizard point me to a Sparc->Mac sample converter?
Given source for such a utility I could write an ST version and make
many Atari owners happy. (Or at least happier.)
Thanks,
Dave Baggett
dmb%wam.umd.edu@uunet.uu.net
------------------------------
Date: 9 May 91 14:03:11 GMT
From: mcsun!ukc!strath-cs!rmacgreg@uunet.uu.net (Sorcerer)
Subject: GEMINI
To: Info-Atari16@naucse.cse.nau.edu
In article <80943@bu.edu.bu.edu> harryk@bucsf.bu.edu (Harry Karayiannis) writes:
[...stuff deleted...]
> Well, I don't really understand this question because, in Gemini, there is
>no need for a small icon to line up with a large icon. Gemini can display
>either large or small icons...but *not* both on the desktop. If you take a
>closer look you 'll find out that there are 2 seperate trees in the resource
>file GEMINIIC.RSC, one for large icons and one for small ones.
[...more stuff deleted...]
Sorry, but I've mixed large and small icons on the desktop quite a few times
before and it doesn't seem to mind in the slightest.
The Sorcerer is 'Only visiting this planet' but can be found at:
JANET: cadx862 @uk.ac.strathclyde.computer-centre-sun
rmacgreg@uk.ac.strathclyde.computer-science
INTERNET: via nsfnet-relay.ac.uk BITNET: via ukacrl UUCP: via ukc.uucp
or second star to the right and straight on 'till morning.
------------------------------
Date: 9 May 91 15:09:06 GMT
From:
noao!ncar!elroy.jpl.nasa.gov!lll-winken!iggy.GW.Vitalink.COM!widener!dsinc!ub!u
bvmsd.cc.buffalo.edu!v124pba3@arizona.edu (John L Robinson)
Subject: MODEM FOR SALE
To: Info-Atari16@naucse.cse.nau.edu
MODEM FOR SALE!
Avatex 1200 baud external modem.
Includes cable.
Asking $35.
Call Rob at (716)831-9348 or reply to this user.
------------------------------
Date: 9 May 91 16:19:42 GMT
From: noao!ncar!zaphod.mps.ohio-state.edu!know!daemon@arizona.edu
Subject: STalker/VAX/Mass-11
To: Info-Atari16@naucse.cse.nau.edu
I am one of the unfortunates in the world who has been forced into
using the Mass-11 word processor on the VAX. This is a true WHAT-YOU-
SEE-IS-NOT-WHAT-YOU-GET (acronym = C.R.A.P.) word processor. Well,
aside from the pain of actually having to use Mass-11, I have been
using UNITERM on a 1280*960 Atari TTM195 monitor on a TT. While UNITERM
does work, it does not run in a GEM window so all I get to use is
the top, left-hand corner of the TTM195.
Yesterday I unwrapped STalker and used it for the first time. Overall,
its a good replacement for UNITERM (at least I can use the whole TTM)
but not all VT100 features are implemented. I have also run into the
following problem.
Mass-11 uses the top four keys on the numeric keypad as PF1..PF4 to
initiate and execute commands. For example, PF1 R = replace text.
If I start editing a document, all the PFn keys work fine. However,
outside a document, at the Mass-11 menu level such a PP (print
menu), none of the PF keys work. Why would PF keys function at one
level in Mass-11 but not at another?
STalker also does not have KERMIT, which is essential for file
transfers at our site. UNITERM has always been THE BEST code I
have ever used for KERMITing files (I have used SmartTerm 240,
Mac240, RedRyder, Crosstalk, ZSTEM (yech!), VersaTerm Pro). I know
that STalker has X/YMODEM, which is popular in the 'BBS'
community, however, KERMIT is the fite transfer protocol that I
NEED in the scientific community (The KERMIT accessory that I
bought with FLASH does not work on the TTM195, just as FLASH
does not run). Do any of the PD kermit accessories work on a
TT with a TTM195?
------------------------------
Date: 9 May 91 15:09:56 GMT
From: noao!ncar!csn!ub!ubvmsd.cc.buffalo.edu!v124pba3@arizona.edu (John L
Robinson)
Subject: ST SOFTWARE FOR SALE
To: Info-Atari16@naucse.cse.nau.edu
ATARI ST SOFTWARE FOR SALE!
GFA-Basic 3.0:
a lightening fast basic compiler
many pascal like features
Asking $25.
Also for sale terminal software:
Flash! program by Antic
Best offer.
Call Rob at (716)831-9348 or reply to this user.
------------------------------
Date: 9 May 91 05:04:34 GMT
From:
arizona.edu!cerritos.edu!nic.csu.net!usc!samsung!olivea!oliveb!veritas!amdcad!j
etsun!pyramid!apalmer@arizona.edu (Albert "Earthquake" Palmer)
Subject: ST systems for sale
To: Info-Atari16@naucse.cse.nau.edu
I have decided to buy a TT, and need to sell the following STs. I would like
to sell everything in the two systems as listed. I will consider all ofters
on both whole systems and pieces.
System 1
-1040STf w/tos1.4 + 2.5 megs (board can be upgraded to 4 megs <$100)
-SM124 mono monitor
-Quantun Pro80S 84meg 3 1/5 drive in Supra case
-Spectre 128 w/Mac roms - Macintosh Plus emulator
-Star SG10 printer
-IMG Scan image scanner
-LDW Basic compiler
-MicroLawyer
-DC Desktop
-Beckemeyer Hard Disk Toolkit
-Supra hard disk utilities
-Why Wait? floppy & hard disk cache + print spooler + ram disk
-SGS Switch program switcher
-.ACCess CLI
-Micro Kitchen Companion recipes on disk
All software has original docs. I will leave shareware and public domain
on the hard drive. This would be a great system for someone thinking about
buying a Mac. I'm asking $1200 for the complete system.
System 2
-520ST w/1 meg + 1 meg + Z-Time clock chip + Mega keyboard
-CCC Learning Station case with 2 DS floppy drives
-SC1224 color monitor
-Rixon T212A 1200 baud modem
-ST Talk Professional telecommunications software
-Neo Desk
-pc-ditto 3.0 - IBM emulator
-Degas graphic arts system
-UMS Universal Military Simulator
-Dive Bomber
-All Aboard!
-Space Cutter
-Micro League Wrestling
-GATO
-Devon Aire
The CCC case is a metal case that holds two Atari floppy drives plus
power supplies for the computer and drives. Everything, including the
monitor, plugs into an internal power strip with an external power switch.
The drives have the cheap mechanisms replaced with Epson mechs. I'm asking
$600 for this system.
I also have about 10 Mega keyboards that I would like to sell. These are
just the bare bones keyboards. They are a direct replacement for the
keyboard in the original 520 without the internal floppy. I'm asking
$40 each for the keyboards or 3 for $100.
If you are interested in any of the above, please reply with e-mail or
call me at (408) 992-0131. If I'm not home, leave a message and I will
get back to you.
thanks,
al
------------------------------
Date: 9 May 91 18:13:06 GMT
From:
noao!ncar!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!caen!umich!vela!swo
od@arizona.edu ( EVENSONG)
Subject: Tank Battle game (saw on PC)
To: Info-Atari16@naucse.cse.nau.edu
I saw a nifty little game the other day for the PC in which you
set up a certain number of players (computer or human) and each gets a
colored tank and some shells, and are dropped onto a hillscape.
The players then must calculate barrel angle and shell power
to take out the other players (taking the wind speed and direction into
effect). As you gain points (by destroying the opponent(s)) you gain
money and can buy extra and better weapons, including dirtballs, explosives,
chain reaction inducers (to eat away the landscape), and nukes. There are
even weapons quidance systems to enhance your accuracy. Destroying the enemy
can also give a wild display of sights and sounds depending on how well they
were hit, and occasionally the fall-out can even hurt yourself.
First off, has anyone seen this game that can help me with the name,
and second, is it available for the ST? I would appreciate any help that I can
get, and will be looking forward to replies.
Thanks
swood
--
---- Insert favorite .signature here ---- | swood@argo.acs.oakland.edu
| swood@vela.acs.oakland.edu
Bitnet: swood@Oakland | swood@unix.secs.oakland.edu
UUCP: ...!uunet!umich!{vela, argo, unix, nucleus}!swood
------------------------------
Date: 9 May 91 16:20:45 GMT
From: mcsun!ukc!icdoc!syma!grahamt@uunet.uu.net (Graham S Thomas)
Subject: Timeworks DTP upgrades
To: Info-Atari16@naucse.cse.nau.edu
From article <2901@odin.cs.hw.ac.uk>, by neil@cs.hw.ac.uk (Neil Forsyth):
> In article <1991May5.124501.14339@mailer.cc.fsu.edu> boyd@nu.cs.fsu.edu
> (Mickey Boyd) writes:
>> Timeworks - No longer updating US versions (but are still updating UK ones).
>
> Hardly. They just did a panic fix to make it work with the TT and maybe fixed
> a few horror bugs while they were at it. Timeworks is static. The PC version
> isn't though and they are pushing the followup Desk Press.
GST know that they've made more money out of ST Timeworks DTP in the
past than they will in the future, so they're not exactly busting a gut
to create new versions of it. It's still probably the quickest DTP
program to learn, though, and it's OK if your requirements are simple.
I've not had much time to play with the latest UK version (it replaces
v1.12, and is confusingly called 1.h12), but a couple of things I've
noticed are:
It seems to need a bit more memory than the previous version. I have
about half the memory on my 1040 taken up with ACCs, AUTO progs, etc.
(although I can add about 150k to that when I unload NeoDesk) and when I
run the latest version of Timeworks it reboots the machine when I try to
open a file (of any size at all). If I take out a couple of
memory-resident programs - any of them - all is well.
It always leaves behind a temporary file on exit - the old version used
to clean up properly (usually).
I haven't had a chance to test whether they fixed the 12pt Dutch font,
which used to print question marks (in the Atari laser version at least)
upside down.
The current version of 1st Word Plus, from the same stable, does seem to
be better than previous incarnations of version 3. The new version
3.20TT allows you to choose a stable or flashing cursor, lets you
configure hyphenation via an exceptions dictionary, allows you to
redefine the keyboard again (this ability was present in v2, but not in
versions 3.1 through 3.14 - it reappeared in 3.15) and allegedly scrolls
faster than before (I can't tell - I use Turbo ST so it's all faster
anyway.) Oh, and it fixes a printer bug that appeared if you
reformatted a doc from single to double spacing, and of course it now
runs on the TT.
Graham
--
Graham Thomas, SPRU, Mantell Building, U of Sussex, Brighton, BN1 9RF, UK
Email: grahamt@syma.sussex.ac.uk Phone: +44 273 678165 Fax: .. 685865
------------------------------
Date: 9 May 91 16:45:40 GMT
From:
noao!ncar!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!sdd.hp.com!usc!appl
e!netcomsv!rcb@arizona.edu (Roy Bixler)
Subject: TOS Command Line
To: Info-Atari16@naucse.cse.nau.edu
In article <A3023378088@thelake.mn.org> steve@thelake.mn.org (Steve Yelvington)
writes:
>[In article <eB2m23w164w@ersys.uucp>,
> ersys!mforget@nro.cs.athabascau.ca (Michel Forget) writes ... ]
>
> >> All that's necessary is that the parent process and the child process agree
> >> on whatever extended argument-passing convention is in use.
> >
> > Uh-oh. I am trying to pass long command lines to RZ.TTP (The Zmodem File
> > Transfer Program) for batch Uploading and Downloading. The problem with
> > the limit becomes obvious when you realize how few pathnames can be put
> > on an 80 (or even 125) character command line. I wrote a program that
> > will capture the command line when it is run and display it, and will try
> > it on other programs that use SZ. I don't think that it supports the
> > XARG convention you mentioned. Any other ideas?
>
>In that case you need to find out what compiler was used to make the RZ/SZ
>programs. My guess would be Mark Williams, whose argument-passing scheme
>is explained somewhat in the EXARG.DOC file. But that's just a guess.
Not correct. I compiled it with GNU C ver. 1.37. From what I've
heard, it supports the extended argument passing scheme of Atari.
> ----
> Steve Yelvington, Marine on St. Croix, Minnesota, USA / steve@thelake.mn.org
--
Roy Bixler
rcb@netcom.com -or- (UUCP) uunet!apple!netcom!rcb
"Just when you think you know it all, it changes!"
------------------------------
Date: 9 May 91 14:09:11 GMT
From: mcsun!ukc!strath-cs!rmacgreg@uunet.uu.net (Sorcerer)
Subject: TOS Command Line
To: Info-Atari16@naucse.cse.nau.edu
In article <LPmL22w164w@ersys.uucp> ersys!mforget@nro.cs.athabascau.ca (Michel
Forget) writes:
>Does anyone know how to use the Pexec function so that it will take a
>command line longer than 80 charactes. I am writing a program that will
>require longer command lines, but I'm stumped on this one. The
>documentation that I have does not mention anything about command lines
>longer than 80 characters, yet they are possible...
>
>
><< ersys!mforget@nro.cs.athabascau.ca >>
><< or in the language that PEOPLE use >>
><< Michel Forget...:) >>
There are 2 methods, Xarg and Exarg, which you use depends on how you feel, cos
from what I can see they do the same job. I'll leave descriptions to the
experts as I cannot remember how to do either of them.
The Sorcerer is 'Only visiting this planet' but can be found at:
JANET: cadx862 @uk.ac.strathclyde.computer-centre-sun
rmacgreg@uk.ac.strathclyde.computer-science
INTERNET: via nsfnet-relay.ac.uk BITNET: via ukacrl UUCP: via ukc.uucp
or second star to the right and straight on 'till morning.
------------------------------
Date: 9 May 91 17:04:52 GMT
From:
noao!ncar!elroy.jpl.nasa.gov!swrinde!mips!atha!aunro!ersys!mforget@arizona.edu
(Michel Forget)
Subject: TOS Command Line
To: Info-Atari16@naucse.cse.nau.edu
> I thought that the German GSZRZ18 supported XARG or ARCV.
>
> I am having the same problem with the Shells that support Zmodem, in
> the number of files that can be uploaded.
>
> The other problem that I have is SZ.TTP from ZMDM16, for some reason it
> drops down to Ymodem, is this caused by the delay in starting SZ.TTP ?.
> Is there a way around this ?
The shells that suppot Zmodem, namely Zflash, have problems with the
command line as well. They try to send as many as thirty-two files along
the command line, but the command line simply isn't big enough. Not very
useful. I received a message from someone that contained a Shar archive,
but I haven't been able to extract it since I don't know what a SHAR
archive is...:) I'll keep looking and probably find the utility
somewhere to extract it. At any rate, it explained the XARG parameter
format.
<< ersys!mforget@nro.cs.athabascau.ca >>
<< or in the language that PEOPLE use >>
<< Michel Forget...:) >>
------------------------------
Date: 9 May 91 16:52:04 GMT
From:
noao!ncar!zaphod.mps.ohio-state.edu!swrinde!mips!pacbell.com!att!linac!midway!c
lout!chinet!saj@arizona.edu (Stephen Jacobs)
Subject: Which monitors can use TT high res?
To: Info-Atari16@naucse.cse.nau.edu
Now that the Atari-supported graphics situation on the TT has been clarified,
does anyone have anything to say about third-party graphics boards for the TT
(or perhaps Mega STe)? Anything actually shipping? Anyone at the stage of
"prototype working, artwork laid out"? Tell me (us) about the ST/TT world's
answer to 8514/a and XGS (did I remember the abbreviations right?).
Steve saj@chinet.chi.il.us
------------------------------
Date: 9 May 91 20:59:31 GMT
From:
arizona.edu!cerritos.edu!nic.csu.net!usc!wuarchive!csus.edu!ucdavis!csusac!csuc
hico.edu!ekrimen@arizona.edu (Ed Krimen)
Subject: Which monitors can use TT high res?
To: Info-Atari16@naucse.cse.nau.edu
In article <1991May09.165204.3132@chinet.chi.il.us> saj@chinet.chi.il.us
(Stephen Jacobs) writes:
>Now that the Atari-supported graphics situation on the TT has been clarified,
>does anyone have anything to say about third-party graphics boards for the TT
>(or perhaps Mega STe)? Anything actually shipping? Anyone at the stage of
>"prototype working, artwork laid out"? Tell me (us) about the ST/TT world's
>answer to 8514/a and XGS (did I remember the abbreviations right?).
ST Informer did a review of the stuff at the Cebit fair, and mentioned and
showed pictures of the Matrix boards' output. There are three boards,
each VME or Mega bus compatible. I don't have the specs on the boards
with me, but one is 800x600 with 256 colors out of 16.7million. Another
is a super-hi-res monochrome, and the final is the same super-hi-res but
in 16 colors. They mentioned that Rio Computers in Las Vegas will be
importing them. They also said that someone had a VGA-like board, with
something like 1024x768 with 16 colors.
Lexicor software is supposed to have their own board out soon. The ISAC
board has been shipping for some time. I think it may only be Megabus
compatible, but I'm not sure. You can find it for around $600. BTW,
there used to be a Parsec 'board' which was actually a unit by itself.
Anyone know whatever became of it?
--
||| Ed Krimen [ekrimen@ecst.csuchico.edu or al661@cleveland.freenet.edu]
||| Video Production Major, California State University, Chico
/ | \ SysOp, Fuji BBS: 916-894-1261
------------------------------
Date: 9 May 91 16:45:25 GMT
From:
noao!ncar!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!jato!vsnyder@ari
zona.edu (Van Snyder)
Subject: WordPerfect update - STe support
To: Info-Atari16@naucse.cse.nau.edu
In article <1991May9.002946.2904@milton.u.washington.edu>
iho@akbar.cac.washington.edu (Il Oh) writes:
>vsnyder@jato.Jpl.Nasa.Gov (Van Snyder) writes:
>>I just called WordPerfect. They're shipping the April Upgrade. They're
>>NOT quitting the Atari market, at least not in the U.S.
>
>It's still that brain-damaged 4.1, isn't it? WordPerfect 5.0 was a
>quantum leap forward for them. As far as I'm concerned, anything prior
>to that is not fully usable.
Unfortunately, yes. They say they're real busy porting 5.0 to lots of
platforms (5 going so far). I think they must be doing something wrong
if porting is so expensive. I would be trying to get 5.1 going on all
platforms, and would have a "Tiger Team" focusing on portability. They
must have machine-specific stuff all tangled up with stuff that ought not
to be machine specific.
--
vsnyder@jato.Jpl.Nasa.Gov
ames!elroy!jato!vsnyder
vsnyder@jato.uucp
------------------------------
End of Info-Atari16 Digest
******************************
