Copy Link
Add to Bookmark
Report

Hackers Directory Volume 34

eZine's profile picture
Published in 
Hackers Directory
 · 5 years ago

  

====================================================
[ Hacker Supreme's - Hackers Directory Volume # 34 ]
[ Compiled by: Ninja Squirrel and Logan - 5 ]
====================================================

=======================================
[ Hack Copyright: Hacker Supreme 1986 ]
=======================================

[ AUTONET SERIES (Section 1) ]


HOW TO CONNECT TO AUTONET


To establish a connection to Autonet, simply follow the steps
listed below.

1. Dial your local access number and wait for a high-pitched
tone.
NOTE: If you are using a direct-connect terminal, proceed to
Step 3.

2. Switch data set to DATA, or place the telephone receiver fir-
mly in the acoustic coupler, orienting the cord as indicated.

3. Press the RETURN key two times.

4. Autonet will respond with:

Autonet Line xxxxxxxxxx
Command:

5. Type one or more of the connection dialog commands described
on the following pages. The appropriate C or ID command and
corresponding name or number will be provided to you when you
become an Autonet user. The H and T commands may be used in
conjunction with either of these.


SAMPLE SESSION

User entries are shown in square brackets ([ ]).

[ <CR><CR> ]

Autonet Line 3130157042
Command: [ C NAME;H;T D1 ]

Autonet will respond to this dialog by:

(1) setting the correct parameters for your terminal
model

(2) typing out the connection dialog HELP file

(3) connecting you to your destination and issuing this
message:

CALL CONNECTED


AUTONET CONNECTION DIALOG COMMAND SUMMARY


COMMAND FORMAT FUNCTION EXAMPLE

C nnnnnnnnnn Requests a connection to a host C 5555
whose address is nnnnnnnnnn.

C cccccccccc Requests a connection to a host C NAME
whose name is cccccccccc.

H Prints this list of commands. H

ID xxxxxxxxx Identifies the user and re- ID 1234-567
quests a connection to the
host associated with the
user's identity code xxxxxxxxx.

T cn Identifies a te2m`nal model by T D1
the terminal identity code cn.
See the TERMINAL option of AID.

* Use a space to separate a command name and its parameter.

** Use a semicolon (;) to separate commands which
occupy the same line.



AUTONET CONNECTION DIALOG COMMAND DESCRIPTIONS

In all examples, information the user types is shown
in square brackets ([ ]).


The C Command


PURPOSE The C command requests a connection to a sub-
scribing host computer. The particular host can
be specified by a numerical address, or, through
special arrangements, by an alphabetic name. The
terminal session is charged to the subscribing
host.


GENERAL FORM C nnnnnnnnnn

Where:

nnnnn~nnnnn is the numeric address assigned by
Autonet to the host computer.

or

C cccccccccc

Where:

cccccccccc is the alphabetic name chosen by the
subscriber for the host computer.


EXAMPLE Autonet Line 3130157042
Command:[ C 5555 ]

CALL CONNECTED

(Proceed with host log-on procedure.)


NOTES If no host exists at the given address or by the
given name, the user will receive the message:

?**No such host.

If the subscribing host will not accept the char-
ges, the user will receive the message:

?**User ID required.



The ID Command


PURPOSE The ID command identifies the user and requests a
connection to the host associated with that
user's identification code. The network will
require the user to enter a valid password before
completing the connection. The terminal session
is charged to the user.


GENERAL FORM ID xxxxxxxxx

Where:

xxxxxxxxx is an alphanumeric user identification
code.

EXAMPLE Autonet Line 3130157042
Command:[ ID 1234-567 ]
XXXXXXPassword

CALL CONNECTED

(Proceed with host log-on procedure.)


NOTES To connect to a destination other than the
default host, use the C command in conjunction
with the ID command.


EXAMPLE Autonet Line 3130157042
Command:[ ID 2345-12;C 5555 ]
XXXXXXPassword

CALL CONNECTED

Proceed with the host log-on procedure.


The H Command


PURPOSE The H command prints a connection dialog command
summary as a helpful reminder for users. The H
command may be used in conjuction with other com-
mands, or it may be used as a single command
PRIOR to issuing the C or the ID commands. If
used individually, the network will follow the
summary display with a prompt for another com-
mand.


GENERAL FORM H

EXAMPLE Autonet Line 3130157042
Command:[ H ]
.
.
.

Autonet displays Command Summary.
.
.
.

Command:


EXAMPLE Autonet Line 3130157042
Command:[ H;C 5555 ]

Autonet displays Command Summary.

CALL CONNECTED

(Proceed with host system log-on procedures.)


The T Command


PURPOSE The T command identifies the use\}r's terminal
model so that the network can set certain operat-
ing parameters to optimize the terminal's charac-
teristics. The T command may be used in conjuc-
tion with other commands, or it may be used as a
single command PRIOR to issuing the C or the ID
commands. If used individually, the network will
establish the correct parameters and will prompt
for another command.


GENERAL FORM T cn

Where:

cn is the alphanumeric code which identifies the
terminal model.

EXAMPLE Autonet Line 3130157042
Command:[ T D1 ]

(Autonet establishes optimal parameters for ter-
minal model.)

Command:


EXAMPLE Autonet Line 3130157042
Command:[ T D1;C 5555 ]

Autonet sets optimal parameters for terminal
model and requests a connection to host 5555.


NOTES A list of codes for commonly used terminal models
appears in "HOW TO USE AUTONET" and under the op-
tion TERMINAL in Autonet's on-line information
directory, AID. Contact your Autonet Sales
Specialist for further information.

-----------------------------------------------------------------------------
Another Great Directory from Hacker Supreme. (Ninja Squirrel /+\, Logan - 5,)
(Zaphod Breeblebox, Silicon Rat, Lord Vision, Crazy Horse, Lancelot-1.)
-----------------------------------------------------------------------------

==============================================================================
[ ------------------- Infinity-Cartel Alliance Network --------------------- ]
[ The Cartel 1&2 Adventure/AE/BBS 5 meg ------ 206-825-6236, or 206-939-6162 ]
[ Infinity's Edge Adventure/AE/Cat/BBS 10 meg ----------------- 805-683-2725 ]
[ The Center Of Eternity BBS ---------------------------------- 817-496-1777 ]
[ ---------- The Cartel #3 and The Cartel 20 Meg AE comming soon! ---------- ]
==============================================================================


← previous
next →
loading
sending ...
New to Neperos ? Sign Up for free
download Neperos App from Google Play
install Neperos as PWA

Let's discover also

Recent Articles

Recent Comments

Neperos cookies
This website uses cookies to store your preferences and improve the service. Cookies authorization will allow me and / or my partners to process personal data such as browsing behaviour.

By pressing OK you agree to the Terms of Service and acknowledge the Privacy Policy

By pressing REJECT you will be able to continue to use Neperos (like read articles or write comments) but some important cookies will not be set. This may affect certain features and functions of the platform.
OK
REJECT