Copy Link
Add to Bookmark
Report
Chaos IL Issue 02
< The Israeli information eXchage >
[-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-[-.-]
[-.-] [-.-]
[-.-] [-.-]
[-.-] ###### ## ## ###### ####### ######## #### ## [-.-]
[-.-] ## ## ## ## ## ## ## ## ## ## [-.-]
[-.-] ## ####### ###### ## ## ######## ## ## [-.-]
[-.-] ## ## ## ## ## ## ## ## ## ## [-.-]
[-.-] ###### ## ## ## ## ####### ######## #### ######## [-.-]
[-.-] [-.-]
[-.-] The Chaos IL Magazine [-.-]
[-.-] [-.-]
[-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-][-.-[-.-]
Chaos IL - Issue #2, 12/Mar/1998
Oi! ~If freedom is outlawed, only outlaws will have freedom~ Oi!
Chaos IL Issue Two Index:
~~~~~~~~~~~~~~~~~~ ~~~~~~
01. Introduction to Issue #2 Sir Knight
02. Phreaking PPA accounts by The Trick
03. Home-made null modem cable by Captain Black
04. Hacking guide for VAX/VMS systems by Sir Knight
05. How to script FT-RELAY Unix scripts by Mr. Freeze
06. Marijuana for fools v1.0 by Jekyll
07. Hacking the AS/400 Operating System by Terminal Man
08. A Novice Cellular Phreaking Manual -VER1.0- by Terminal Man
09. User Registry of H/P *
10. Resources & Credits Chaos-IL
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
***
01. Introduction to Issue #2
Note from Sir Knight (sknight@liquid98.com):
Welcome to Chaos-IL, Issue #2. First of all, I would like to greet all the
people who fanned our first issue, and gave us some motivation to go on.
As you all probably noticed, this issue is much larger then issue #1, and
so, the size talks by it self; This issue coveres all questions, requests,
notices and announcements that were acceppted by users at our Information
System, and at e-mail notes about the many articles. We've recieved alot
of requests for adding more Hacking material, and so we did in this issue.
We've also recieved alot of problem notes regarding to the articles, and
we did our best to truely help them all, I hope we did. However, two new
editors has joined us during the time; Terminal Man and The Trick. Please
note, that if someone writes an article for this current issue or another,
it does not mean he is an Chaos-IL member, we are freely acceppting original
articles, and adding any that are found quality and good anough. Any of
you that tried to reach us over the net, has probably noticed that our domain
was down during the last week, and so, e-mails to @chaos-il.com were unvalid.
our new website and central mail address are done as the follow:
Web: http://www.liquid98.com/chaos-il
Email: sirknght@liquid98.com
Although, you may e-mail your feedbacks to the specific member address that
is written in each article buttom, or at our Information system.
We are satisfied of the result after the first issue release, which made the
tiny Israeli scene, to have more interest in h/p. I figured it out by
the huge amount of comments we've recieved, filled with questions of any kind
regarding to h/p, and the articles included in issue #1. Keep it that way!
Sir Knight. Editor-in-Chief
_____________________________________________________________________________
Chaos-IL primary members:
Sir Knight sirknght@hotmail.com
Captain Black capblack@unixgods.com
Mr. Freeze mr_freeze@idc.co.il
The Trick trick@mindless.com
Terminal Man terman@hotmail.com
Jekyll wwsuicide@hotmail.com
Fourth Horseman 4thm@liquid98.com
Skade
Squish
Blue Grass shine-@usa.net
Endless
Members can be reached via eMail (also see in article's buttom).
Applications, feedbacks, corrections, support, will done at:
sirknght@liquid98.com
How to retrieve Chaos IL
~~~~~~~~~~~~~~~~~~~~~~~~
Chaos IL Issues will be regulary available once released in these fine boards:
Liquid Underground +972 (0)3-9067029
Kaos On Compton +972 (0)8-8524603
The Orphaned Land +972 (0)8-9422043
Chaos IL is also regulary in the following anonymous sites:
ftp.fc.net ./pub/phrack/underground/chaos-il/
defon.mit.edu ./pub/nordlys/chaos-il/
ds.internic.net ./pub/misc/cilmag/
ftp.auscert.org.au ./pub/emags/chaos_il/
* Israeli sites will be also available soon.
Other methods
-------------
-Join our IRC channel at EFFNet: #chaos-il
-Look out the Web at: http://www.liquid98.com/chaos-il
02. Phreaking PPA accounts
***
<><><><><><><><><><><><><><><><><><><><><><>
<> <>
<> Phreaking PPA Accounts <>
<> <>
<>////////////////////////////////////////<>
<><><><><><><><><><><><><><><><><><><><><><>
By: The Trick / Chaos-IL Magazine!
ISP IA's can be obtained very simply, by carding them. Just like AT&T, most
of the Israeli ISPs are supporting the Previous Accounting policy, which
availables the service of Previous-Paied Authorization. PPA is used to serve
a temporary global Internet provide, that can be signed for anytime and from
anywhere. Ofcourse, in a higher cost then a normal accounting service.
most of the ISPs are serving PPA since it's an alltime profitable service,
and does not cousing a shortage to the company in case it was chancled (unlike
normal accounting service). Using the validation of the PPA in the current
ISP, you can phreak your own PPA accounts using a Full-detailed Credit Card
information and a sorted house address & telephone info that can be used.
Israel ISP Networks Information:
ISP Voice Support E-Mail Support HTTP Homepage
____________________________________________________________________________
IBM 177-022-3993 info@ibm.net.il www.ibm.net.il
Gold Internet 177-022-0101 service@inter.net.il internet-zahav.net
InfoGate 03-5258527 info@infogate.co.il www.infogate.co.il
InfoLink 03-5332466 support@infolink.net.il www.infolink.net.il
InfoMall 03-651165 info@infomall.co.il www.infomall.co.il
AquaNet 03-5366503 meny@aquanet.co.il www.aquanet.co.il
ActCom 177-022-9715 info@actcom.co.il www.actcom.co.il
BezeqNet 1-800-800135 menu.bezeq.net
GezerNet 08-9270648 webmaster@gezernet.co.il www.gezernet.co.il
IsraServ 09-7603897 danny-g@israsrv.net.il www.israsrv.net.il
IsraCom 06-6272712 admin@isracom.co.il www.isracom.co.il
Canaan Surfing 06-6925757 canaan@canaan.co.il www.canaan.co.il
Kinneret 06-6732678 flenner@kinneret.co.il www.kinneret.co.il
LuckyNet 06-6360036 admin@luckynet.co.il www.luckynet.co.il
LahavNet 07-9913333 rafi@lahavnet.co.il lahavnet.co.il
MaxNet 03-9513592 root@maxnet.co.il www.maxnet.co.il
Netvision 04-8560600 info@netvision.net.il www.netvision.net.il
StarNet 03-6137788 info@star.net.il www.star.net.il
Trendline 03-6388222 www.trendline.co.il
ShaniNet 03-6391288 info@shani.net www.shani.net
Carding a PPA can be done through Voice support, E-Mail support, and sometimes
in the ISP's website/Homepage. Carding your PPA through Voice support is
recommanded only if you are fully convinced that local support calls are not
being logged to the current ISP you are calling to. Some ISPs are tracing and
logging all of thier local support calls that are made, for further use in
case that damage has been done. In some of the ISPs, carding a PPA through
an E-Mail or through the ISP's Homepage can be rejected, since registrations
through the Internet are not being improved in some of the ISPs, and specially
a registration for an PPA service that is temporary, and freely given.
-*- Voice Carding method -*-
Call your selected local ISP, produce your self as like in the middle of some
kind of a buisnesslike travel or anything that is truely describes your image
as of an important buisness man. Most companies wont give away PPA accounts
to the big public even if needed, since PPA accounts are connected through a
private self-user network which disables any network ports load.
Ask for opening a personal PPA account, couse of buisnesslike purposes.
In special cases they might ask what kind of purposes exactly, then, simply
say that you can not detail your purpose couse of private reasons. Also say
that you reached them for thier PPA service only, and you dont have any other
intents, but you do can move up to ask for another company's service. That
should be the maximum anough conversation, if the support man demand for more
exact details about you and your service purpose, dont flow and call another
ISP support using the same methods. If done ok, you will be asked for your
personal credit card information, and about the type of service you wish.
Give them the credit card information at first, include everything. When the
support man asks you to hold since he's verifying your card details, dont hold
for over then 1-2 minutes. If the card have found un-valid, he might try to
trace your call location and announce the police right away, therefor he'll
need some time. Since you sorted an empty house address for the bills to be
sent, in the card verification, the support man might notice that your details
do not match (generaly almost never happens). In that case, say it's your
old home address which is still empty since you moved, and you would like the
account bill to be sent there. After that you shouldn't get any technical
problems of any kind. He'll tell you to hold a few, and you will recieve your
full detailed account information by FAX/Voice. Please note, that the support
men in some of the companies, are using the voice number that is within the
credit card, for verifying your agreement by voice. In that case, when you
tell the support man your credit card full information, instead of the giving
the original voice phone number, give him a Bezeq Revoked number.
Bezeq revoked number, is a number which used by a company for services, and
after the company has closed the service, they didn't had any need of it.
If the company is using an outdial network (*9, etc.) Bezeq cannot disable the
number from their lines, so they revoke it. Those numbers are alltime busy,
and will keep being revoked until the company who owned it will die.
You can use one of the following numbers:
03-6750043
03-6750011
03-6750076 /* Note: Most of the plain revoked numbers
03-6750066 can be found on area codes 03, 04 and 08. */
03-6750023
03-6750054
03-6750068
03-6750066
03-6750060
03-6750098
03-6750091
03-6750044
Other 675-00-XX digits are used for BezeqNET's ISDN services and for LBO,
(Local Buisness Office). After you reiceved your PPA account information, go
ahead and use it. The main idea of PPA accounts is temporary, the ISP will
send an account bill with time used, and service payment to the house address
you sorted within the credit card information. You have to make sure the
house is totaly empty, and will be for a few months, otherwise, right when the
house owners will get the account bill and they will see thier name signed on
it, they will announce the ISP, and you'll get traced in a few days.
When the ISP company will notice that your PPA account is not being paied
after they sent you the account bill, they will send another few with a warn.
Its recommanded to use the PPA account for no longer then three months, after
that period, stop connecting with it! At first, the ISP company will close
the account, and will keep sending warns to the sorted house address, they'll
try contacting the account owner through the revoked number which is actually
busy all the time. From this point, they are totaly postrates. Have phun!
-*- Internet Carding method -*-
Well, I have'nt been to check this actually, but it seems that more then 80%
of the ISP companies are serving an account registeration through the Internet,
by E-Mailing, or through thier official homepage. It have'nt been checked if
the Internet registeration methods, supports all types of registerations.
You should access your desired ISP's homepage, and check if PPA account is
valid for Internet registeration. If valid, you simply add-in the card details
in the same process described in the Voice Carding method. If not valid, use
the E-Mail method, and E-Mail a request for opening a PPA account including
nice flatters in your request :) . It's either 100% that your request will be
acceppted, and you'll be able to feedback your credit card information.
Also try to disable the request, and send the card details plus request for
opening an account on the same E-Mail, at the first place.
-*- Final Note -*-
What's so good and profitable on going through all this process, is that normal
accounts that are originaly owned by someone else, or any of those kinds, are
usually being replaced, or password changed if you use them too much. And
it's either 99% of them are non-supporting over 1 simulataneous connected.
Although, PPA accounts has no simulataneous limit, and you can use them like
how much you want, Ofcourse, until the warns are starting to be mailed.
It's like 3-4 months after the ISP is starting to send the warns, but for
making sure, try to find an empty house that is near you or something, so you
can check the new mail once a month.
Glossary:
=========
PPA == Pevious Paied Authorization
ISP == Internet Server Provider
IA == Internet Account
Have phun :) please, if it's your first time carding, don't try this.
(c)Copyright 1998 by The Trick / Chaos IL
03. Home-made null modem cable
***
\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
\ \
\ HOME-MADE NULL MODEM CABLE \
\ \
-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
by
Captain Black
(c) Chaos-IL Magazine!
Here's how to construct a null modem cable, used to connect 2 PC's by their
serial ports. This allows you to transfer files from one PC to another at up
to 115,200 baud, providing a fast and easy way to transfer files which are
too large to fit on diskettes, or solving the problem of transfers when 2
PC's have incompatible disk drives. A suitable cable can be purchased
already made, or you can make one yourself. In addition, you will need some
type of software to manage the job. There are two commercial packages that
are known to exist:
* LapLink
* FastLynx
You can find these and more packages in any commercial software source in the
Internet, such as WWW.SOFTWARE.COM & WWW.IDTSOFT.COM.
It's probably about the same price, and less fuss to buy the proper cable
from a computer shop. But, when making your own cable, the afterwards
results talk by themselves :)
All the necessary parts are available at any known electric store around. I
paid only 30 NIS. for all the necessary parts, in an electric store near to
Dizengoff Center, in Tel-aviv.
These are the stuff you will need:
o Electrical or similar tape. Helps.
o Small blade or phillips screwdriver (for the connector you buy)
o Tweezers or forceps
o Sharp knife or wire stripper
o Soldering iron & solder (if using the solder type)
o Connector Crimping Tool (for AMP brand connectors)
o Wire cutters
Eight or nine conductor cable works well, and allows for addition of
connections if they should be needed in the future. To use the crimp type
connections, you need the tool to crimp the pins onto the wires. If you plan
on making several cable in your lifetime, then the tool is well worth it.
Otherwise, you're probably better off paying someone else to make it.
If the computers you are connecting have 9 pin serial connectors, you need
the female (with holes) connectors on both ends of your cable. (IBM's and
compatibles have male connectors for their 9 pin serial ports). If yours are
female, make sure the connector is not a video connector instead of a serial
port connector. 25 pin COM ports on IBM's and clones are typically male,
also. Whether you make a cable with 9 pin or 25 pin connectors (or one at
each end), pre-made adapters can be purchased to convert from 9 pin to 25
pin, and vice versa. I made all mine with 9 pin ends, and use 9 pin to 25
pin adapters with good results.
TIP: Buy enough cable! As long as you're making it, make a length of about 8
or 10 feet. I've made cables, when using shield, about 35' in length
with no problems. Better a little too long than too short.
TIP: If you done, it's hardly recommanded to wrap electrical tape around the
cable at each end to fit underneath the connector. The connectors and cable
at Radio Shack don't fit real snug together, allowing the cable to slip out
and put stress on the electrical connections. You'll see what I mean when
you are closing the connector together.
NOTE: The following text includes partial information from the FastLynx
program User's Manual. For further information, get FastLynx of your own.
***
Cable Specifications
~~~~~~~~~~~~~~~~~~~~
Following is a description of the pin connections for a FastLynx 7-wire
serial cable. The cable is a 4-headed cable with a 9-pin and 25-pin female
connector on both ends. The cable is wired as follows:
9 pin 25 pin 25 pin 9 pin
----- ------ ------ -----
pin 5 pin 7 <----> pin 7 pin 5 (Ground - Ground)
pin 3 pin 2 <----> pin 3 pin 2 (Transmit - Receive)
pin 7 pin 4 <----> pin 5 pin 8 (RTS - CTS)
pin 6 pin 6 <----> pin 20 pin 4 (DSR - DTR)
pin 2 pin 3 <----> pin 2 pin 3 (Receive - Transmit)
pin 8 pin 5 <----> pin 4 pin 7 (CTS - RTS)
pin 4 pin 20 <----> pin 6 pin 6 (DTR - DSR)
The ground wire is connected to the same pin on both ends. The last three
wires are a reverse of the prior three.
Following is a description of the pin connections for a FastLynx parallel
cable. The cable has a male DB25 connector at both ends.
25 pin 25 pin
------ ------
pin 2 <----> pin 15
pin 3 <----> pin 13
pin 4 <----> pin 12
pin 5 <----> pin 10
pin 6 <----> pin 11
pin 15 <----> pin 2
pin 13 <----> pin 3
pin 12 <----> pin 4
pin 10 <----> pin 5
pin 11 <----> pin 6
pin 25 <----> pin 25
The second set of 5 wires is the reverse of the first set.
The following cable will allow transfers using LapLink 3. However, it
doesn't support the feature of installing the software from the remote. The
FastLynx cable above does work with all the features of FastLynx. The
following cable merely transmits and receives data. It cheats by jumping
connections at each end to trick the computer into thinking it's connected to
another computer. The FastLynx cable above allows the 2 PC's to actually
communicate. However, I haven't gotten LapLink III to install software from
remote with FastLynx's cable, either. FastLynx does it just fine when using
a FastLynx type cable. Here's a diagram to make a true Laplink 3 cable.
The instructions are identical to the FastLynx cable also.
|
|
Connector 1 | Connector 2
----------- V -----------
Transmit Data 2 <================\ /-------------------> 2 Transmit Data
\/
Receive Data 3 <-----------------/\====================> 3 Receive Data
RTS 4 <-----+ +-----> 4 RTS
| |
CTS 5 <-----| |-----> 5 CTS
| |
DSR 6 <----------+ +----------> 6 DSR
| | | |
Ground 7 <-----|----|-----------------|----|-----> 7 Ground
| | | |
CD 8 <-----+ | | +-----> 8 CD
| |
DTR 20 <---------+ ** ** +---------> 20 DTR
Explanation:
------------
*Connect pin #2 of one connector to pin #3 at the other end. This is known as
a "pin 2 to 3 crossover". That way one computer receives what the other is
transmitting.
At each end, connect pins #4, #5, & #8 together.
Also at each end, connect pins #6 & #20.
** If you are using a nine pin connector, this connection is not needed as
there is no pin #20. A connection to pin #6 is not needed.
TIP: Before you get too far, cut off about 3/4 inch of cable off one end of
your length of cable. Then, strip the insulation and foil from this piece or
use tweezers or forceps to remove the 9 wires from inside. Strip the
insulation off both ends of 4 of these wires, 6 if making a 25 pin connector
cable. These short pieces of wire will be needed to make the jumpers at each
connector. Twist one end of each of 2 wires together, and solder them both
pin #5. Then one wire can go to pin #4, and the other to pin #8 as in the
diagram.
Glossary for the above:
-----------------------
TD == Transmit Data
RD == Receive Data
RTS == Request To Send
CTS == Clear To Send
DSR == Data Set Ready
CD == Carrier Detect
DTR == Data Terminal Ready
I've made their cable, and it works quite well (atleast the serial cable does)
So, this text is a culmination of all three - the original file, my comments
and ideas, and part of FastLynx documentation. (not 100% original though)
Here'se the Laplink 3 documentation, that was ripped from a CB E-Mag #22:
**************************************
* *
* PARALLEL HIGH-SPEED CABLE- *
* SHORT DONKEY-D THAT IS USED *
* WITH THE PRINTER END OF A *
* PRINTER CABLE! *
* *
* DB25 CENTRONICS *
* MALE FEMALE *
* SHIELD --- SHIELD *
* 2 -------- 32 *
* 3 -------- 13 *
* 4 -------- 12 *
* 5 -------- 10 *
* 6 -------- 11 *
* 10 --------- 5 *
* 11 --------- 6 *
* 12 --------- 4 *
* 13 --------- 3 *
* 15 --------- 2 *
* 25 -------- 30 *
* *
**************************************
However, I'm sure you will build your own cable, either if based on the
Laplink 3 documentation, or either if based on the FastLynx one. Both of them
will serve you as well! Enjoy.
Send comments to capblack@unixgods.com
Captain Black / Chaos-IL, 1998.
***
04. Hacking guide for VAX/VMS systems
____________________________________________________
| |
| Hacking guide for VAX/VMS systems |
_|________________________________________________|_
by
Sir Knight
(c) 1998 Chaos-IL Magazine!
Note from Sir Knight
-=-=-=-=-=-=-=-=-=-=-=
Since the huge amount of complains I've got on feedbacks at Chaos-IL systems
about publishing system numbers, I decided to include a VMS system number
that you can connect and use to excute all of the described and instructed
in the following article lines- , although, connection to a VMS system by
telnet is much recommanded.
***=> VAX/VMS V6.2/V5.5: 177-022-7883 <=***
Before getting hard into, here's some basic information about VAX/VMS systems;
It all starts from the DECserver. Digital Equipment Corporation (DEC) company
creators of the VAX computer, which is running the VMS (Virtual Memory System)
operating system. VAX Stands for Virtual Address Extention. The VAX is a
variation of the PDP (Programmable Data Processor) designed by DEC in 1978.
The VAX uses a 32 bit processor and "virtual" memory which has made it the most
popular computer in the history of the world. The plural of VAX is VAXen.
Once a while, the people at DEC, has released a network server that runs
on the VAX computer and has many machines available from it. This network
server is named DECserver. Through the DECserver you can access many different
machines and systems, such as VAX computers and VMS systems that are operated
from them. Adventionally, the DECserver is what links to the VAX/VMS systems,
and you will know a DECserver by the following login prompt:
_______________________________________________________________________________
DECserver 700-08 Communications Server V1.1 (BL44G-11A) - LAT V5.1
DPS502-DS700
(c) Copyright 1992, Digital Equipment Corporation - All Rights Reserved
Please type HELP if you need assistance
Enter username>
_______________________________________________________________________________
The starting up DECserver's login prompt will acceppt any username entered,
and will move you to logged season that is prompted like this: ' Local> '.
>From here and on, you are accessable to all the services provided by the local
VAX computer which is actually the DECserver you are connected to. At first,
the most recommanded thing to act with, is to deeply explore the available
HELP section in the current DECserver.
DECservers provides a very friendly online Help guide, type 'HELP' to gain help
on all topics and commands available, you can learn alot about the system then
what this article describes by exploring all the Help sections.
SERVICES
As told before, the DECserver opens a wide services communication with many
different systems and terminals avialable. Type 'sh services' to see all of
the available services from the current network server. This will follow
something like that:
Service Name Status Identification
ALPHA1 Available Welcome to OpenVMS Alpha (TM) Operating Syste
VAXX Available @SYS$MANAGER:ANNOUNCE.TXT
VAXXX Available Welcome to VAX/VMS V5.5-2
VAXXXX Available @SYS$MANAGER:ANNOUNCE.TXT
VAXXXX Available Welcome to VAX/VMS V6.1
BAZAN3 Available @SYS$MANAGER:ANNOUNCE.TXT
BAZAN4 Available @SYS$MANAGER:ANNOUNCE.TXT
BAZAN7 Available Welcome to OpenVMS VAX V6.2
BAZAN8 Available Welcome to OpenVMS Alpha (TM) Operating Syste
BAZAN9 Available Welcome to OpenVMS Alpha (TM) Operating Syste
COL120 Available Welcome to OpenVMS Alpha (TM) Operating Syste
COL324 Available Welcome to OpenVMS Alpha (TM) Operating Syste
HVN_08002B25CE80 Available CM50S LAT Service Assigned
HVN_08002B2F73E2 Available CM50S LAT Service Assigned
HVN_08002B314809 Available CM50S LAT Service Assigned
HVN_08002B318418 Available CM50S LAT Service Assigned
HVN_08002B326973 Available CM50S LAT Service Assigned
HVN_08002B9170DD Available CM50S LAT Service Assigned
HVN_08002B956330 Available CM50S LAT Service Assigned
HVN_08002B95AA46 Available CM50S LAT Service Assigned
PRINTER0 Available PRINTER0
VAX31 Available @SYS$MANAGER:ANNOUNCE.TXT
VAX45 Available @SYS$MANAGER:ANNOUNCE.TXT
VLC1 Available @SYS$MANAGER:ANNOUNCE.TXT
If the status shows Available, it still does'nt means its accessable to your
terminal specificlly. Use the syntax of 'c <servicename>' (C is a shortcut of
CONNECT), Before connecting any service, you will know which services are a
VAX/VMS system if the Service's Identification shows @SYS$MANAGER:ANNOUNCE.TXT
or @SYS$SYSROOT:WELCOME.TXT and also any identification that starts up with
'Welcome to VAX/VMS', 'Welcome to OpenVMS', 'Welcome to VAX Assigened'.
The other services available, are a devices that are also operated from the VAX
computer you are currently logged into, these can be any LAT (Los Altos Tech.)
services, or device ports of the VAX computer that are reachable through the
DECserver, which can be hard-drives, disks, modem, printer, and any other
possible device.
OUTDIAL MODEM
One of the most interest and profitable things that you can find inside the
DECserver, is the modem, which gives you an out dial line for calls that wont
be charged by you. There are some DECservers that you can find the modem
device listed with all the other services (in 'sh services' command), it will
show up like that:
Local> sh services
Service Name Status Identification
ALPHA1 Available Welcome to OpenVMS Alpha (TM) Operating Syste
ALPHA2 Available @SYS$MANAGER:ANNOUNCE.TXT
ALPHA3 Available Welcome to VAX/VMS V5.5-2
PRINTER0 Available PRINTER0
DIA0 Available
VMS80 Available @SYS$MANAGER:ANNOUNCE.TXT
VMS13 Available @SYS$MANAGER:ANNOUNCE.TXT
VMS30 Available @SYS$MANAGER:ANNOUNCE.TXT
* It's obvious that service DIAL1 is the modem device port. Connect the modem
using the service connect syntax 'c <ServiceName>'.
Local> c DIAL1
Local -010- Session 1 to DIA0 established
*** DECTERM V8.03 ***
atz
This is a similar way of any Modem device that has been connected. Through
the terminal, use the general AT commands for using the modem to dial.
Unfortunately, most DECservers are a bit more secured, and will let connecting
the modem device only for privileged user, or will shadow the device so it will
not be shown in the 'sh services' services listing. There is a solution for
both of these security techniques; Setting privileges in DECserver is simple,
there are a some default passwords that are always being used for privileges.
To get the privileges setting prompt, type 'set priv' and then try entering
one of the following defaults:
ACCESS
PRIVMODE
PRIVACC
DECSERV
FIELD
SERVICE
WORKDIV
SYSTEM
CONFIRM
DECNET
Enter the password as signal, and prompt enter. If the password prompt repeats
after you entered the password, it means it's incorrent. If you've recieved
the 'Local>' prompt back again, your password is correct and you are having
a privileged access to the current call. While privileged, you will be able
to see the services that are available to you as in privileged access mode,
type 'sh services local' to see the services available in this season, and also
try typing 'show nodes' to look out for the outdial. The modem can be shown
in a few ways while in the services listing; any similar words to 'TERMINAL',
'TERM', 'DIAL', 'MODEM' are assumed to be the outdial modem port.
Ofcourse the final and the best process to do for looking up for the dialout,
is to scan all available connections and service ports until you get it.
In high secured DECserver systems, the modem name will be shadowed, and even
when privileged you wont be able to see any similars or hints for it. In this
case, try connecting the following services, either if they are not listed:
Syntax: c <servicename>
Service Name Status
___________________________________
|
$1$DIA0 | Reachable
$1$DIA1 | Reachable
DS700 | Reachable
LTA5002 | Reachable
ADS9204 | Unknown
ADS8002 | Unknown
ADS3011 | Reachable
TERM | Unknown
MODEM | Reachable
DECTERM | Unknown
COMMODE | Reachable
These are basiclly the mutations that a modem dialout device can be shadowed
within. The above were successfuly connected, if none are working try find
the service name by your self. (Hint: look at the HELP section in topic SET)
VMS/VAX SYSTEMS - STARTUP INFORMATION
Many different VAX/VMS systems are available through the DECserver services.
VMS (Virtual Memory System). You will know a VMS system by the following login
prompts at startup connection:
Local> c VMS_SER01
Local -010- Session 1 to VMS_SER01 established
(Screen is being cleared, and the following will be shown in ANSI terminal)
#3
#4
#3 VAX/VMS SYSTEM Ver 6.2
#4 VAX/VMS SYSTEM Ver 6.2
#3
#4
*** UNAUTHORIZED ACCESS IS PROHIBITED ***
Username: CHAOSIL
Welcome to OpenVMS VAX V6.2
Last interactive login on Wednesday, 25-FEB-1998 22:46
Last non-interactive login on Wednesday, 27-NOV-1996 09:47
26-FEB-1998 11:42:51
$
The second startup login prompt of the VMS system is:
Welcome to VAX/VMS V6.1
Username:
_______________________________________________________________________________
Please note that in the second login prompt the screen wont be cleared up,
and the 'Welcome to' startup can be any text. But in most of the cases, the
OS name and version will be shown as usuall.
_______________________________________________________________________________
TECHNIQUES OF ACCESSING A VMS SYSTEM
There are two facts about accessing a VMS system, which one of them stands for
the Hacker's good will, and the second stands for the VMS operating system
improvment of security. The first fact that stands for our side is the similar
accounting methods that are in most of the VMS systems. At first, try gain
access using the following default logins:
Username Password
~~~~~~~~ ~~~~~~~~
field service
motor service
design support
systest utep
jargon field
digital decnet
decnet decnet
Sys Admin default logins (No password):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Username
fiber
system
compax
mac
laptop
The second part of accounting methods that is similar in VMS systems, is the
range of Local-Service Users (LSU). Local-service Users are made to keep up
the legenth of the VMS's security net, these are demo users that were actually
transplanted into the VMS and each one of them serves a part from the security
net, or serves for automatic performs in the VAX computer. LSU are operated
from files similar to UNIX scripts, and you can set them up as IRC-Bots to act
in the system on a specific date, time, area, system field, and the like.
(I will add more information about LSU in future, next issues), but at the
moment, you need them for the login operation, and so, its possible to login
as a LSU user as long as you know the account's name and as long as the LSU
is not currently logged. LSU Accounts are single-simultaneous toggles.
LSU USERNAME ACCOUNTS:
~~~~~~~~~~~~~~~~~~~~~~
USER30
USER20
USER25
USER16
USER105
USER3110
USER3111
USER3117
USER3118
USER3120
USER3204
USER3209
USER3216
USER3301
USER3302
USER3304
USER3402
USER3502
USER3506
APC103
AUSER1
AUSER2
CM50S_MGR
HUSER1
HUSER2
USEPL1241
USEPL1244
USEPL1246
USEPL1248
USERLM
USERLU
_______________________________________________________________________________
*NOTE: These are valid for OpenVMS VAX V6.2 & OpenVMS VAX V5.5.
All of them seems to work, you should try at least 5 logins from each series
of accounts. For example, USERXXXX (4 Numbers digit) is one series, and the
USERXX (2 Numbers digit) is the compared one. It's recommanded to do so,
since each series of accounts is used to something else in the system, and
each login from the accounts series is used to perform something else.
For example, when logged in with USER3000 your home directory in the system
include some secret material data files (Example!), and when logged in with
the account of USER3001, your home directory in the system is included with
some nice gaming programs for example, or anything else.
_______________________________________________________________________________
By now, you've been blowed with a couple techniques of accessing a VMS system.
If performing them slow and correctly, there is absolutely no doubt that
you'll gain yourself access. As written before, either then the wide accessing
forms that VMS provides (as described above), VMS systems has also a fact that
stands for the system's sceurity; Unlike UNIX machines, VMS operating systems
keeps track of all failed login attempts on each account that is exist on the
system, and if there were bad login attempts, the system informs the original
account owner about it by mail, and also include a full-log of the bad login
attempts that were made. (This method of system securing, is similar to an
"ACIDIC Login" PPE program for PCBoard BBS systems).
The mail that inform the original account owner is being receieved like that:
_______________________________________________________________________________
#1 14-AUG-1
1997 16:30:08.99
MAIL
From: VMSXXXX::CHAOSIL
To: CHAOSIL
CC:
Subj: SYS$SYSTEM$LOGIN:TRACK_FAILS
Amount of 2 failed logins attempted from your account registry:
12:23:05.99-12/DEC/97:MYROCK:MYROCK001
06:23:05.99-14/DEC/97:BURACA:PSWD22
Please attention for further changes in your private registry.
MAIL>
_______________________________________________________________________________
* Which stands for:
12:23:05.99-12/DEC/97:MYROCK:MYROCK001
ÀÄÄÄÄÂÄÄÄÄÙ ÀÄÄÄÂÄÄÄÙÀÄÄÂÄÄÄÙÀÄÄÄÂÄÄÄÄÙ
TIME DATE ACCOUNT PASSWORD
This securing method, gives a heavy risk while trying to gain access. Similar
copies of message such as these, are being mailed to the System Administrator
as once, and he might force the account owner to change his access information
right away. Although, if you've already accessed the system using another
account, you can simply disable this securing method, by erasing the mail that
was auto-sent to the account and to the System Administrator. (Described in
the below title).
TECHNIQUES & USAGE OF THE VMS OPERATING SYSTEM
When first logged to the VMS system, alot of questions will come up in your
mind; such as what can you do through this system, and how to use it for your
own needs. The first way you should act with, is try finding out what are the
purposes of the system you are connected to, like, what for does the system
exist, and what does it serves. You can find all of these and alot more by
exploring the whole system. Which means, getting into interest files, look at
all available commands and learn how to use them, reading messages that are
passed between the users, and finaly; make up the best of your needs out of
the system. You cannot be guided through this, since each system acts in a
different way, and used for a different purpose. Basically, the following
will guide you to get into each hole or field that is in the VMS system.
HELP
~~~~
VMS has a great on-line help section that is including examples of commands.
use it at any case to findout more about anything you've found. The help given
is very well, and will get you through ANY difficult in usage.
THE WAY VMS NAMES FILES
~~~~~~~~~~~~~~~~~~~~~~~
Filenames in VMS make strange sense. The format looks like this:
filename.extension;version_number
Where the "version_number" is a number which gives you information on the
files revision.
In naming a file under VMS you can use 39 characters for the file name and 39
characters for the extension name.
WILDCARDS IN FILES
~~~~~~~~~~~~~~~~~~
Wildcards in VMS work just like they do in DOS, or DOS under W95.
PURGE
~~~~~
The purg command will delete all the files in your directory with multiple
version numbers saving only the last two.
SEEING WHO'S CONNECTED
~~~~~~~~~~~~~~~~~~~~~~
The command 'show users' will print all the open ports of the system, and the
users that are connected to it at the moment.
VMS FILES MAINTENANCING
~~~~~~~~~~~~~~~~~~~~~~~
DIRECTORIES
Some of the commands are also similar to DOS commands, if you are anough
experianced with DOS (probably all), that will make it easier for you.
In the $ prompt, the system will respond with the directory path, like this:
$[SYSMNGR]:
The current directory is SYSMNGR.
* To create a directory use at the $ prompt, this command:
create/directory [.name]
If you are creating a subdirectory off of your root directory you don't need
the whole directory path name.
* To change a directory, use the command:
set default [.directory_name]
* To copy files, use the command:
copy [-.stuff]*.*
Will copy everything from the directory [-.stuff] to the current directory.
* To run a file, use the command:
run [filename] ; If entered a single filename, it wont run.
* To abort/quit from any situation (runned program, delay, etc.):
PRESS: CTRL-Y or CTRL-E <<== IMPORTANT!
INTERNET SERVICES
~~~~~~~~~~~~~~~~~
All valid internet services are available freely.
Use 'TELNET' to activate a Telnet communication program.
Use 'FTP' to activate a File Transfer Protocol communicator program.
Use 'IRC' to operate an Internet Relay Chat program.
Use 'RUN NETSERVER.EXE' to start a connection dialup to the internet. (do not
excute this command if connected already. Otherwise, your current connection
will be crushed).
Within the service programs, use the same commands as used in DOS/W95 internet
programs. Like OPEN/CONNECT to get a site connection in FTP/TELNET.
Or, /SERVER [SERVERNAME] to connect an IRC Server.
_______________________________________________________________________________
Security, Hints, and general Hacking
Here are some security notes, useful hints, and general Hacking information,
which can serve you alot after you got little bit into working with the VMS.
HACKER'S SECURITY
First thing to do when logged in, for getting yourself some security credits,
is to enable the account logging information to the file SYS$MANAGER:ACRT0.DAT
or to the file SYS$MANAGER:ACCOUNTING.DAT (depends by the system). When the
account logging information gets enable to one of these files, you are possible
to do any actions, and erase the file when done your work. To enable the
accounting and so, closing the system's audit process command the following:
at the $ prompt:
SET ACCOUNTING /ENABLE - Enables the account logging information
SET AUDIT /ENABLE - Enables the system's audit process
>From now on and until you're done for the current season, you are still not
completely blowed out of any logging. If you are not logged in as a system
manager, or you have no privileges, these commands are left to be logged after
you enabled the accounting and the audit process:
/*/ Termination excutions /*/
BATCH Termination of a batch job
DETACHED Termination of a detached job
INTERACTIVE Termination of an interactive job
SUBPROCESS Termination of a sub process
PROCESS Any terminted process
/*/ General commands /*/
PRINT Print Jobs
IMAGE Image execution
LOGIN FAILURE Login failures
MESSAGE User messages
The IMAGE command operations are actually being logged, but using IMAGE you can
disable the whole account logging facility!
PRIVILEGES THROUGH VMS IMAGE
The main idea here, is based on the following; Images are used to describe
the account details regarding to the system settings, each set of a user mode
such as PRIVILEGED mode, or NORMAL mode, has an image installed which gives
the system an information about the account when it's logged. For example,
an NORMAL mode account, as setted by the system, has an image installed which
disables him to read the password file for example. On each command excuted
by the user, the system will check the image file to see if it's valid or not.
There is a similar way to hacking, for loading an privileges image to your
own account, and so, let the system make you privileged.
You can excute the following when logged in any mode; From within your current
home directory, run the file DECW$DEVICE.COM in directory SYSMGR. (there are
files available to run from within the system manager's directory, and this
is one of them). Run as the follownig syntax:
$ RUN SYSMGR$DECW$DEVICE.COM
After pressing return, you will recieve a fail operation message:
%DCL-W-ACTIMAGE, error activating image DECW$DEVICE.COM
-CLI-E-IMGNAME, image file $1$DIA0:[SYS0.SYSCOMMON.][SYSMGR]DECW$DEVICE.COM;2
-IMGACT-F-BADHDR, an error was discovered in the image header
The program you've runned is actually a utility to activate an sub-image for
privileged users. Sub-image is the same as image script, but it's served by
the system administrators to run special programs from their privileged mode.
the sub-image is used for securing the system in a situation of an
un-authorized user is logged to the system (like us) and sabotaging.
The un-authorized user wont be able to do superior privileges if the sub-image
was not loaded. When the privileged users sub-image is operated from a normal
mode account like in this case, it will simply get an error accord, and will
chancel your current loaded/activated image, which is a normal mode image.
After the normal mode image is chanceled, you are actually imageless, which
gives you the option to load ANY other image available. And ofcourse, the
most great thing to do is loading the privileges image and become privileged.
After you've recieved the error image activating message while running the
file DECW$DEVICE.COM, you're image is chanceled. Now, you'll have to install
a privileged image, and then to load it.
Run INSTALL.COM or INSTALL.EXE as the following syntax:
$ RUN SYS$SYSTEM:INSTALL.COM (or INSTALL.EXE)
Quit the program right after it loads by pressing CTRL-Y.
The privileged image is being installed one-by-one as the following;
The first char is the directory, the second name is the privileged command to
load in the image.
Install privileged executable images:
_______________________________________________________________________________
sys$system:analimdmp /priv=(cmexec,cmkrnl)
sys$system:authorize /priv=(cmkrnl)
sys$system:cdu /priv=(cmexec)
sys$system:chkp0strt /priv=(cmexec,cmkrnl)
sys$system:chkcancmd /priv=(sysprv,cmkrnl)
sys$system:init /priv=(cmkrnl,phy_io,sysprv)
sys$system:install /priv=(cmkrnl,sysgbl,prmgbl,shmem)
sys$system:loginout /priv=(cmkrnl,tmpmbx,log_io,sysprv,sysnam,altp)
sys$system:mail /open /header /shared
sys$system:mail_server /open /header /shared /priv=(sysprv)
sys$system:monitor /priv=(tmpmbx,netmbx)
sys$system:phone /priv=(netmbx,oper,prmmbx,world,sysnam)
sys$system:request /priv=(tmpmbx)
sys$system:rtpad /priv=(tmpmbx)
sys$system:set /priv=(cmkrnl,sysprv,tmpmbx)
sys$system:setp0 /priv=(cmkrnl,sysprv)
sys$system:setrights /priv=(cmkrnl)
sys$system:show /priv=(cmkrnl,netmbx,world)
sys$system:shwclstr /priv=(cmkrnl)
sys$system:submit /priv=(tmpmbx)
sys$system:sysman /priv=(cmkrnl,setprv)
sys$system:vpm /open/header/priv=(tmpmbx,netmbx,sysnam,sysprv,
ltpri,pswapm)
This data file is used to install the minimum set of VMS images required
for VMS to behave as documented. That means it includes all privileged
executable images and those shareable images that user programs may be
linked against.
Run the file SYSTARTUP_V5.COM as the following syntax:
$ RUN SYS$SYSTEM:SYSTARTUP_V5.COM <Image command>
If the file is not exist in this directory, run it from your homedir:
$ RUN SYSTARTUP_V5.COM
<Image command> is the ' /priv=(... ' text. For example, let's take this line:
sys$system:monitor /priv=(tmpmbx,netmbx)
Which is actually built like that:
sys$system:monitor /priv=(tmpmbx,netmbx)
ÀÄÄÄÂÄÄÄÄÙ ÀÄÄÂÄÄÙ ÀÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÙ
DIR IMAGE/COMMAND IMAGE'S IDENTIFICATION COMMAND
To load the monitor command(image), that is located in directory SYS$SYSTEM ,
you'll have to use the SYSTARTUP_V5.COM loader as the following syntax:
$ RUN SYSTARTUP_V5.COM /priv=(tmpmbx,netmbx)
The SYSTARTUP_V5 program will reconize that ' /priv=(tmpmbx,netmbx) is the
identification command for the image MONITOR, and will so, install monitor to
you new image script, and when typing 'run sus$system:monitor' you'll be able
to load this file which is actually accessable for privileged only.
Install all the other commands by that syntax, until your image will be full
with all the commands, and able to load them. Now, you are privileged, and so
accessable to any command or section.
When privileged, done your hack by accessing your password file. Move to
some Terminal modem program, (such as Terminate, Telix) and set the capture on.
then, view the password file as the follow:
$ type SYS$SYSTEM:SYSUAF.DAT
ÀÄÄÄÂÄÄÄÄÙ ÀÄÄÄÂÄÄÄÄÙ
SYSDIR VMS PASSWORD FILE
Make sure it have been captured.
Before signing off, make sure to delete the account logging file which you
enables at the first place. These should be:
SYS$SYSTEM:ACRT0.DAT or SYS$SYSTEM:ACCOUNTING.DAT
If you cannot delete it for some reason, dont get too much mass, edit the file
and clear all he contains. Like:
$ EDIT SYS$SYSTEM:ACRT0.DAT
or
$ EDIT SYS$SYSTEM:ACCOUNTING.DAT
Only when you sure the password file have been captured successfuly, and the
accounting logging file is erased/empty, sign off, and enjoy your hack to
access the system using other accounts to retrieve any data that the system
can supply for your needs. Always be careful, and make sure for your security.
End.
Feedbacks regarding this article will done at:
sirknght@liquid98.com
(c) 1998, Sir Knight., Chaos-IL Magazine.
[EOA]
05. How to script FT-RELAY Unix scripts
***
==========================================
How to script FT-RELAY Unix Scripts
==========================================
by Mr. Freeze
Designed to Chaos-IL, 1998
Maybe you'll find the following experience usefull - it is not general,
and it is applicable only for Unix hosts on the Janet network, but I'm
sure that there must be a dedicated VMS (or whateverOS) hacker who can
think of something similar for the appropriate OS.
When I want something from Simtel (or, any other software respository)
I go thru the ft-relay. It's much faster than any other option.
I have written two little shell scripts which I have put into my ~/bin
directory (but it can be anywhere within your search path) and I have
called them ftget and ftget.proto (but it will work quite well under any
other name - providing a line or two were changed).
The ftget.proto is just an interface to the ftget script which actually
invokes the NIFTP/FTP transfer (it can be hhcp, or cpf, or fcp, or
whatever) via the uk.ac.ft-relay gateway.
The general way of invoking the transfer is:
short_hostname [-b] remote_directory remote_file
For each system I wish to connect, I add a symbolic link with an unique
hostname which points to the ftget.proto script, and add an extra line
into the ftget.proto script which will describe the new system. Symbolic
link can be created by:
ln -s ftget.proto short_hostname
The extra line in the ftget.proto script (below the case statement) is of
the form:
short_hostname) host=some.host.university.edu;bdir=base_directory;;
You can set bdir to /pub or whatever, to shorten the typing for every
transfer.
As an example, if I want to collect a file from the Wuarchive.Wustl.Edu
(mirror of Simtel20, but more FTP lines, and faster thruput), let's say
the file: BAT2EX14.ZIP from the PCMAG directory, I stuff the command:
wustl -b pcmag bat2ex14.zip
where the script "wustl" is only a symbolic link (created by:
ln -s ftget.proto wustl
Unix command) to the original ftget.proto script. The -b switch stands
for binary transfers. The accompanying line in the ftget.proto reads:
wustl)host=wuarchive.wustl.edu;bdir=mirrors/msdos;;
where mirrors/msdos is the common directory branch for the Simtel stuff.
Since you are using hhcp instead of cpf, you'll need to edit the ftget
script and replace the line:
cpf $swch -U=$user@$host -p=$pw $dir/$file@uk.ac.ft-relay $file
with something like:
hhcp $swch -T user@host -P $pw uk.ac.ft-relay:$dir/$file $file
due to the different syntax of cpf and hhcp. If you change the name of ftget
script, make sure that you change the name in the ftget.proto.
I prefer to use the -T usename -P passwd compared to hhstore stuff, since
the username will change with the host you want to connect to (not to
mention the recent security scare about the hhstore).
You'll probably want to change the password for the anonymous FTP into your
email address.
That is just about all that I could think of. If you have an questions,
please let me know, and I'll do my best to try to answer them.
Here are the scripts:
--------------------
/* FTGET v1.0 */
#!/bin/sh
#
# $Id: ftget,v 1.0 91/09/16 18:00:12 mr_f Exp Locker: mr_f $
#
#
# script for getting the stuff via ft-relay
#
# $Log:ftget,v $
# Revision 1.0
# Initial revision
#
#
pgname=`basename $0`
swch=
dir=
file=
host=
user=anonymous
pw=nino@mph.sm.ucl.ac.uk
#
case $1 in
"") echo "usage: $pgname [-b] directory file host"; exit 1;;
-*) swch=$1; shift;;
esac
#
dir=$1; shift;
file=$1; shift;
host=$1; shift;
#
cpf $swch -U=$user@$host -p=$pw $dir/$file@uk.ac.ft-relay $file
#
# end
/* FTGET.PROTO v1.0 */
#!/bin/sh
#
# $Id: ftget.proto,v 1.0 91/09/16 18:00:41 mr_f Exp Locker: mr_f $
#
#
# script for getting the stuff via ft-relay
#
# $Log:ftget.proto,v $
# Revision 1.0
# Initial revision
#
#
pgname=`basename $0`
swtch=
bdir=
dir=
file=
host=
#
# set parameters according to host
case $pgname in
wustl)host=wuarchive.wustl.edu;bdir=mirrors/msdos;;
prep) host=prep.ai.mit.edu;bdir=pub;;
watsun) host=watsun.cc.columbia.edu;bdir=kermit;;
*)echo "Host $pgname not supported (yet)...";\
echo "usage: $pgname [-b] directory file";exit 1;;
esac
#
# input processing
case $1 in
"")echo "usage: $pgname [-b] directory file";exit 1;;
-*)swtch=$1;shift;;
esac
#
dir=$1; shift;
file=$1; shift;
#
# do it.
ftget $swtch $bdir/$dir $file $host
#
# end
HHG Unix scripts
+--------------+
HHG Provide a convenient command to manage the collection of publicly
available directory listings and individual files from previously
specified Internet sites for a JANET host which runs hhcp under unix.
The HHG files are unix scripts which are almost ready to use. The
comments included in the scripts are intended to make them largely
self-documenting for those familiar with unix scripts.
* Use hhcp to get directory listings and files via FT-RELAY from specific
site/directory combinations offering public access.
Here is an example of a HHG script, that I made a year ago:
#!/bin/sh
# hhg - version 1.0
[ -f $HOME/.hhgok ] || {
for i in gawk hhalias hhstore hhcp
do
[ `which $i | wc -w` -ne 1 ] && {
echo This utility needs $i. See your system administrator.
exit 1 ;}
done
hhalias uk.ac.ft-relay ftb
sort -u -o $HOME/.hhalias $HOME/.hhalias
echo 'Required utilities for hhg are available' > $HOME/.hhgok ;}
# Send data, including this file, to gawk script for analysis and action
{ echo `hhstore -l ftb | wc -l` ; echo $* ; echo $0; cat $0 ;} | gawk '
# Start of gawk script
# Detailed reference for awk/gawk programming
# "The AWK Programming Language", Aho,Kernighan,and Weinberg,
# Addison Wesley
# Record whether hhcp transfer parameters are present for ft-relay
FNR==1 { if ( $0 ~ /^1$/ ) hhparam = "absent"
else hhparam = "present"
next
}
# Record the command parameters
FNR==2 {
site=$1 ; subdir=$2 ; file=$3
if ( file=="-b" ) { swch="-b" ; file=$4 }
if ( subdir=="" || ( swch=="-b" && file=="" )) { help="yes"; next }
next
}
# Record pathname of hhg
FNR==3 {
hhgpath=$1
next
}
# Process installation data
/^# Installation data #$/,/^# Installation end #$/ {
msg0 = "Read " hhgpath " and install it as directed!"
msg1 = "Check installation section of hhg "
msg2 = ": e-mail address?"
msg3 = ": retain/delete?"
msg4 = ": plain/extended?"
if ( ictr == 3 ) { ictr++ ; next }
if ( ictr > 3 ) { print msg0 ; exit 1 }
getline ; ictr++
if (( NF > 1 )||( $0 !~ /@/ )) { print msg1 msg2 ; exit 1 }
# if (( $0 ~ /bsrdp/) && ( $0 ~ /warwick/ )) { print msg0 ; exit 1 }
address = $1
getline ; ictr++ ;
if (( NF > 1 )||(( $0 !~ /retain/ )&&( $0 !~ /delete/ )) ) {
print msg1 msg3 ; exit 1 }
hhaction = $1
getline ; ictr++ ;
if (( NF > 1 )||(( $0!~/plain/ )&&( $0 !~ /extended/ )) ) {
print msg1 msg4 ; exit 1 }
namestyle = $1
}
# Process site/directory data
/^# Site data #$/,/^# Site end #$/ {
if ( sctr==0 ) { sctr++ ; getline }
# Show help data
if ( help=="yes" ) {
if ( $0=="# Site end #" ) {
print "Example: hhg wuarchive . "
print "Example: hhg wuarchive arc-lbr -b fv138.zip"
exit 1
}
if ( helpctr==0 ) {
print "Get file or directory list for " address
printf " " namestyle " filenames, "
print hhaction " hhcp parameters"
print "Own use: hhg site subdir"
print " hhg site subdir [-b] file"
print " |"
helpctr++
** Figure these sources to make your own scripts.
Mr. Freeze $ Chaos IL $
06. Marijuana for fools v1.0
***
--------------------
Marijuana for fools!
--------------------
v1.0
By: Jekyll
-----
Index
-----
1. Disclaimer
2. Germination
3. Planting
4. Harvesting & Drying...
5. Other
----------
Disclaimer
----------
I WILL NOT BE RESPONSIBLE IN ANY WAY TO DAMAGE CAUSED BY THE USE OF
INFORMATION PROVIDED IN THIS ARTICLE. SMOKING MARIJUANA IS BAD EXPENSIVE
AND CAN CAUSE HEALTH PROBLEMS.
-----------
Germination
-----------
For the germination process you'll need cotton and a plate.
Here is what you should do:
1) Take the cotton and put it inside the plate.
2) Soak the plate with water (not too much) so that the cotton will be moist.
3) Take some of your best seeds and put them on the moisted cotton.
4) Store the plate inside a dark place (a closet will be great).
and thats it! you've done the "hard" part, now all is left for you to do
is to keep an eye on the plate every 24 hours...
just to check if its still moisted, when its starting to dry moist it again!
(the trick is to keep the cotton moisted, if you'll let it dry even one t
ime
you'll ruin the hole process).
After 7-14 days you'll see a root starting to come from the seed,
wait until the root will be 1.5 centimeter (approx.) and then plant it in
a secured area (a pot will be great!).
--------
Planting
--------
Hmmm... for the planting process all you'll need to have is a pot, and
fertilized soil.
Here is what you should do:
Go to a local nursery and buy a pot and some fertilized soil.
(dont use regular dirt from your local playground it might contains germs
and god knows what)
Now fill the pot with the soil... and plant the germinated seeds.
Be very very careful not to ruin the fresh root.
Immediately after you plant the seeds water them and keep them in a lightened
area.
Now before you'll start watering the plant and flood it with too much water
here are some tips and facts about the Marijuana plant that will help you.
1) Marijuana "loves" direct sun light (the more sun-light the faster
it grows!)
2) The Marijuana roots "loves" air! so dont water it too much...
I would recommend you to keep the soil moisted and water it every 3 days.
3) The bigger the container (pot) is the largest the plant will be.
So thats it... now you know how to grow the damn thing :) all is left for you
to do is to wait until the plant will mature and then harvest.
----------------------
Harvesting & Drying...
----------------------
After 2 months of "hard" work :) the plant is big enough for harvesting...
But before you'll harvest the plant let me inform you with some more
important details!
The male version of the plant is worthless (it DOESN'T get you high!)
so if you get a male plant throw it to the garbage! dont even think
of smoking it... I bet you are asking yourself now how you can recognize
between the male plants and the female plants.
well... the male plant produces flowers and the female plant produces seeds.
So if you see that your plant contains some white flowers.. you know its a
male! But if you see seeds instead of flowers then its a female!
When the plant is starting to produce seeds/flowers you know its time for
harvest.
To harvest the plant just rip it straight from its roots, and then store
the plant in a dark place (such as a closet) and let it dry slowly! dont
even think of drying it in the sun... (the heat will dry all the fluids
and the plant will be almost worthless) just let it dry slowly inside the
closet for 2 weeks. And after two weeks of drying, the plant will be crispy
to touch.. and life less :) then you can start smoking the leaves.
Only the leaves contains THC (THC is the substance that get you high)
so dont even think of smoking the roots of the plant.. :)
That it!! now you can grow marijuana for yourself (assuming you have the
seeds :)).
-----
Other
-----
I've enclosed in this section some important information I forgot to add
to the main article.
-- brown seeds are healthy! -- white, gray, green seeds aren't healthy and
probably wont germinate at all!
-- Beware of white flies. they can ruin your crop!
-- If you own a pet, make sure it wont ruin your crop... I have a friend
that his dog ate all of his crop in a single day!! :)
-- More light for the plant the faster it grows -- you can buy some special
light bulb and give the plant 24 hours light 7 days a week!
-- For more information and guides you should check out this awesome web site
WWW.HIGHTIMES.COM
(c) 1998, Jekyll. Chaos-IL Magazine.
[EOA]
07. Hacking the AS/400 Operating System
***
_ ____________________________________________________ _
$ $
$ Hacking the AS/400 Operating System $
_$____________________________________________________$_
BY: Terminal Man (terman@hotmail.com)
CHAOS-IL MAGAZINE 1998
While I was scanning some systems for Chaos-IL, I came upon a system that
had a domain name like blah400.blah.edu (the 'blah' is there for the systems
own protection). And so I telnetted into it. And low and behold, a system
I have never seen before. Here is a screen shot of the main login screen.
The "#" sign will indicate a cursor position. I will show you the quick ways
to get something done first, like the ways I did stuff on the machine before
I knew how to do some commands, and what keys to press here and there, later
on in the file I will explain how to execute commands as they should be exe-
cuted. You can find an AS/400 Operating System at: 177-022-5445 ("MENORA" net)
Sign On
System . . . . . : BLAH400
Subsystem . . . . : QINTER Display . . . . . : QPADEV0003
User . . . . . . . . . . . . . .#
Password . . . . . . . . . . . .
Program/procedure . . . . . . . .
Menu . . . . . . . . . . . . . .
Current library . . . . . . . . .
(C) COPYRIGHT IBM CORP. 1980, 1994.
(Once again, you can find this over 177-022-5445, "MENORA" Network)
My first instincts were to try and find a default password for it.
So I started with login ROOT ; pw ROOT, no go, so I tried login GUEST ; pw
GUEST. BINGO!! After typing the user id, press down, then go back to the start
of the entry for the password then type that in, because pressing enter after
entering your user ID, it will try to login, after you type in the password,
then press enter to login. The next screen you will get is the main screen.
And it should look something like this:
MAIN AS/400 Main Menu
System: BLAH400 Select one of the following:
1. User tasks
2. Office tasks
4. Files, libraries, and folders
6. Communications
8. Problem handling
9. Display a menu
10. Information Assistant options
11. Client Access tasks
90. Sign off
Selection or command
===>_#___________________________________________________________________
__________________________________________________________________________
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant
F23=Set initial menu
Type option number or command.
A note with the logins. This system (AS/400), GUEST is a defualt,
and should always work. Especially with school run systems, like
universities. Some other defualts are login:QSECOFR ; pw: QSECOFR, which is
the Security Officer, QSRV and QSRVBAS with passwords QSRV and QSRVBAS respectively,
which are IBM Engineer's accounts, DST, which there are three of with passwords of
DST, which stands for Dedicated Service Tools. But if this is perhaps not a school
system, and maybe some company just set it up, but didn't bother too much to
read the part on logging in and security in the user's manual, and left the
system security to LEVEL 10, which is the lowest level of security on the
AS/400, _*ANYONE*_ is allowed to login. The system will create a user profile
for each new user, like a BBS, and users can access all objects on the
computer.
The next level of security is LEVEL 20, one of the defualt users on
the system, like the sysadmin, called the Security Officer, must have creat-
ed user profiles for each user, so not just anyone can log in with anything,
but if you still can log in, then you have access to all objects on the
system still.
The next level up on the security is LEVEL 30. At this level, the
Security Officer must have created user profiles for each user like LEVEL
20, but this time, access to objects on the system is restricted without
prior Security Officer authorization.
And the highest level of security on the AS/400 is LEVEL 40. Access
to objects on the system is alot more restrictive then with LEVEL 30.
If you are wondering about the F13 & F23 commands at the bottom of
the main screen, do not go nuts trying to figure out where these keys are.
They do come on an AS/400 system keyboard, but I am assuming you do not have
one of these, but if you do, go onto IRC and /dcc me it. To utilize F13 on
your keyboard, hit [Shift] and hold down while pressing [F1], to use F14, hit
[Shift] and hold while pressing [F2], and so on, until F24, it's a fairly easy
concept to grasp.
Now, from this main menu, we can skip on over to the communications
menu, or main menu option number 6. Which should bring up a menu like this:
CMN Communications
System: BLAH400 Select one of the following:
2. Messages
3. Access a remote system
8. Send or receive files
Selection or command
===>______________________________________________________________________
___________________________________________________________________________
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant
F16=AS/400 Main menu
Type option number or command.
Hmmm... ahh there it is, number 3. Access a remote system. Type this on
the command line, and it will bring you to our next menu. You don't have to
worry about menu commands number 2 and 8 for now, figure those out later, for
the moment we are going to just deal with number 3.
REMOTE Access a Remote System
System: BLAH400 Select one of the following:
1. Sign on using 3270 emulation
2. Sign on using 5250 pass-through
3. Submit a network job
4. Submit a remote command
5. 3270 printer emulation
6. Remote job entry
Selection or command
===>_____________________________________________________________________
__________________________________________________________________________
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant
F16=AS/400 Main menu
(C) COPYRIGHT IBM CORP. 1980, 1994.
Here is the AS/400 Remote System Communication menu. As for what to
do with these, I have no idea how to use these. They appear to be for
connection to a remote AS/400 system, and no others. I tried to connect to
several unix hosts, but it would not recognize the DNS format. So if you know
a system name of a remote AS/400 machine, you may be able to connect to it.
Next we will move back to the main menu. But before I go into any
other menu's, I want you all to be aware of a good AS/400 Connection utility,
to help you actually use the correct commands. It is located at
http://www.as400.ibm.com/client/cawin16.htm for windows 3.1. The FAQ for this
software is included along with this file in the zip file, under client.faq
as the filename. It is taken straight from the IBM Client Access for AS/400
for windows 3.1 software page, which can also be obtained from the site
mentioned above. IBM is the creator of this client access software, because
IBM is the maker of the AS/400 system. I have not used this software, but it
is the only software that I found that could be helpful with exploring the
AS/400 system, in it's truest form aside form an AS/400 hardware setup. The
AS/400 computer system has a very different keyboard then a PC keyboard.
Also, for PC users connecting through telnet to an AS/400 system, some
key shortcuts that I have found are as follows:
Ctrl + K - delete line or charactars from the cursor on, not the full line. as the delete key will not work.
Ctrl + C - go back a screen. (System Request?)
Ctrl + X - move down a line.
Ctrl + U - move to the bottom of the input area.
Ctrl + H - move forward a space from the current cursor position.
Ctrl + B - refresh screen, also Ctrl + L
Tab Key - field advance
Scroll Lock - help key
Print Screen - SysReq
A bit on the operating system now; AS/400 utilizes what is called
Control Language commands, or CL commands. When these are entered from a
prompt or input area from a main-type menu (i.e. the =>______ places), they
will execute a specific command, and take you to a certain area of the system,
or menu. Some CL commands that I know of are:
chgpwd - change password
cpyf - copy a file
crtpf - create a phsyical file
dspmsg - display messages
dspusrprf - display a user profile
wrkmsg - work with messages
wrksyssts - work with system status
wrk usrprf - work with a user profile
User's profiles: or dspusrprf
All users of the AS/400 must have a user profile. This contains the
user's authority on the system. This tells who can sign on to a system, and
what functions each user can perform after signing on to the system.
A user profile contains the userid (sign on name), the user's
password, the user library name, initial menu, job description name, output
queue name, message queue name, and so on and so fourth. The user profile
controls the user's access to system objects outside the user's library on
the system. To view your own profile on the system, type on a command line:
dspusrprf
then hit the F4 key. Then type in yout userid, and press enter. You will then
get something like this:
Display User Profile - Basic
User profile . . . . . . . . . . . . . . . : GUEST
Previous sign-on . . . . . . . . . . . . . : 07/15/97 22:46:35
Sign-on attempts not valid . . . . . . . . : 0
Status . . . . . . . . . . . . . . . . . . : *ENABLED
Date password last changed . . . . . . . . : 08/06/96
Password expiration interval . . . . . . . : *SYSVAL
Set password to expired . . . . . . . . . : *NO
User class . . . . . . . . . . . . . . . . : *USER
Special authority . . . . . . . . . . . . : *NONE
Group profile . . . . . . . . . . . . . . : *NONE
Owner . . . . . . . . . . . . . . . . . . : *USRPRF
Group authority . . . . . . . . . . . . . : *NONE
Group authority type . . . . . . . . . . . : *PRIVATE
Supplemental groups . . . . . . . . . . . : *NONE
Assistance level . . . . . . . . . . . . . : *SYSVAL
Current library . . . . . . . . . . . . . : *CRTDFT
More...
Press Enter to continue.
F3=Exit F12=Cancel
(C) COPYRIGHT IBM CORP. 1980, 1994.
Then press enter to get more, which is a list of authorized commands that the
user has access to:
Display Authorized Commands
User profile . . . . . : GUEST
(User does not have specific authority to any commands.)
Bottom Press Enter to continue.
F3=Exit F12=Cancel F17=Top F18=Bottom
As guest, there is not much open for you. Then press enter. This will take you
to see what devices you are authorized to use:
Display Authorized Devices
User profile . . . . . : GUEST
(User does not have specific authority to any devices.)
Bottom Press Enter to continue.
F3=Exit F12=Cancel F17=Top F18=Bottom
As guest, you do not have much open for you again. Press enter again, to see
what objects on the system you have access to:
Display Authorized Objects
User profile . . . . . : GUEST
----------Object-----------
Object Library Type Opr Mgt Exist Alter Ref
GUEST QSYS *USRPRF X X
Bottom Press Enter to continue.
F3=Exit F11=Display data authorities F12=Cancel F17=Top F18=Bottom
What this menu shows you is, what object which is GUEST, what library yo have
access to, what type of library it is (*USRPRF) user profile, and the X's
under Opr and Mgt, mean that you have Operator and Management privilages with
your object and library. Hit enter to continue on:
Display Owned Objects
User profile . . . . . . . : GUEST
Total objects . . . . . . : 1
Authority
Object Library Type Holder
GUEST QUSRSYS *MSGQ
Bottom Press Enter to continue.
F3=Exit F12=Cancel F17=Top F18=Bottom
This section of your user profile tells you what objects on the system you
currently have ownership status of. And who is the owner of the objects. In
the case, everyone on the system has authority to own/use GUEST. Press enter:
Display Primary Group Objects
User profile . . . . . . . : GUEST
Total objects . . . . . . : 0
----------Object-----------
Object Library Type Opr Mgt Exist Alter Ref
(There are no objects for this primary group.)
Bottom Press Enter to continue.
F3=Exit F11=Display data authorities F12=Cancel F17=Top F18=Bottom
This section tells you what primary objects belong to your group. This
displays that you have no owned objects on the system. Press enter, and this
will take you back to the main menu.
Changing your password: or chgpwd
There are two ways to go about changing your password. 1.) From the
main menu, press 1 (User Tasks). When you press 1, you will get this menu:
USER User Tasks
System: BLAH400
Select one of the following:
1. Display or change your job
2. Display messages
3. Send a message
4. Submit a job
5. Work with your spooled output files
6. Work with your batch jobs
7. Display or change your library list
8. Change your password
9. Change your user profile
60. More user task options
90. Sign off
Selection or command
===>
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant
F16=AS/400 Main menu
(C) COPYRIGHT IBM CORP. 1980, 1994.
>From here, you can enter option number 8 to change your password, or you can
2.) type chgpwd from a command prompt. Either way it will bring you to this
screen:
Change Password
Password last changed . . . . . . . . . . : 08/06/96
Type choices, press Enter.
Current password . . . . . . . . . . . .
New password . . . . . . . . . . . . . .
New password (to verify) . . . . . . . .
F3=Exit F12=Cancel
This menu tells you last time your password was changed, tasken from your
user profile. No, to change your current password, type your existing passowrd
for the Current password area, press Field Exit or the Tab key. then type what
you want your new password to be. Hit the field exit or tab key. Type in the
passowrd you chose to confirm it. Then press enter to complete the process and
move back to the user task's screen.
Next on the list, go back to the main menu. If you find that you
cannot, press Ctrl + C, then 90, then enter twice, this will bring you back to
the login screen. Re-login, and from the main menu choose option number 4,
which is: Files, libraries, and folders. You will then be prompted with this
menu:
DATA Files, Libraries, and Folders
System: BLAH400
Select one of the following:
1. Files
2. Libraries
3. Folders
4. Client Access tasks
5. Integrated File System
Selection or command
===>____________________________________________________________________
________________________________________________________________________
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant
F16=AS/400 Main menu
(C) COPYRIGHT IBM CORP. 1980, 1994.
Quickly for one second, notice the "DATA" in the upper left hand corn-
er of the menu, this is the menu name. From the login screen, type in your
userid, password, and go down to the menu option there, and type in the menu
name you want to begin with. If you type data, it will bring you to this menu.
Now, first we will explore option number 4, or client access tasks,
which will output this menu:
PCSTSK Client Access Tasks
System: BLAH400
Select one of the following:
User Tasks
1. Copy PC document to database
2. Copy database to PC document
3. Work with documents in folders
4. Work with folders
5. Client Access Organizer
Administrator Tasks
20. Work with Client Access administrators
21. Enroll Client Access users
22. Configure PC connections
23. Work with line description query status
30. Change keyboard and conversion tables
Selection or command
===>
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant
F16=AS/400 Main menu
(C) COPYRIGHT IBM CORP. 1980, 1994.
What this menu allsows you to do is self-explainitory. This menu is
not to enlightening, so we will move on to the next option from the DATA menu,
number 5. Integrated File System. Which will bring up this next menu:
FILESYS Integrated File System
System: BLAH400
Select one of the following:
1. Directory commands
2. Object commands
3. Security commands
Selection or command
===>
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant
F16=AS/400 Main menu
(C) COPYRIGHT IBM CORP. 1980, 1994.
This menu is simple, but has alot of power, for instance, try option
1:
FSDIR Directory Commands
System: BLAH400
Select one of the following:
1. Create directory
2. Remove directory
3. Change current directory
4. Display current directory
Selection or command
===>
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant
F16=AS/400 Main menu
(C) COPYRIGHT IBM CORP. 1980, 1994.
This allows you to make, delete, change, and display directories.
This may not be much, but for you MS-DOS and UNIX users, these are more down
to home commands that you are more used to. If you are on the AS/400, start
yourself off with familliar things and commands like these, that way, you will
learn it better. Like when you first went from MS-DOS to UNIX, you knew dir,
which became ls. You knew cd, which was cd on unix, you first familliarized
yourself with stuff you knew from your past expiriences. This is the closest
you will come to familliar stuff. The next option from the previous menu was
number 2, or object commands, which will call upon this menu:
FSOBJ Object Commands
System: BLAH400
Select one of the following:
1. Work with object links
2. Display object links
3. Copy object
4. Rename object
5. Move object
6. Add link
7. Remove link
8. Check out object
9. Check in object
10. Copy to stream file
11. Copy from stream file
12. Save object
13. Restore object
Selection or command
===>______________________________________________________________________
__________________________________________________________________________
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant
F16=AS/400 Main menu
(C) COPYRIGHT IBM CORP. 1980, 1994.
When you have had enough expirience with the AS/400 system, you will
realize, that the system is heavioly based around Objects, which then this
menu will come in useful to you. The next and final option from the FILESYS
menu is 3, or security commands, which will bring up this menu:
FSSEC Security Commands
System: BLAH400
Select one of the following:
1. Work with authority
2. Display authority
3. Change authority
4. Change owner
5. Change primary group
6. Change auditing value
Selection or command
===>______________________________________________________________________
__________________________________________________________________________
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant
F16=AS/400 Main menu
(C) COPYRIGHT IBM CORP. 1980, 1994.
This menu is the fun stuff. Option 2 will display what authority you
have on the system. Option 3 will change what powers you have on the system,
or your authority, as GUEST on this perticular system, you have no authority
to change your own authority. Option number 4 will change the owner perm-
issions on your Object; GUEST. Option number 5 will change your primary login
group, or the group your profile belongs to. Option number 6 will change you
auditing value. I would show the menu's, but as GUEST, I do not have access to
these menus.
The next item I will cover is option F13, the Information Assistant.
This is a set of online tutorals, sort of like the UNIX man pages. The AS/400
has a set of online tutorals for a user, a manager, a programmer (AS/400), and
other audiences. From the main menu, press 10, then enter. This will bring up
this menu:
INFO Information Assistant Options
System: BLAH400
To select one of the following, type its number below and press Enter:
1. Where do I look for information?
2. How can I comment on information?
10. What's new this release?
11. What's coming in the next release?
20. Start InfoSeeker (BookManager)
21. Start online education
24. Start search index
Type a menu option below
__
F1=Help F3=Exit F9=Command line F12=Cancel
(C) COPYRIGHT IBM CORP. 1980, 1994.
For the time being, forget all the options from this menu and let's just
concentrate on option 21, Start online education. Which will bring you to
another section, where you have to type in your name. Type in your first name,
then press tab, then type in your last name, and press enter. (Of course you
do not have to type in your REAL name =) Then it will bring yo to the next
menu, where you have a set of courses you can choose from to be educated in.
Select 1 for the Tutoral system Support, or TSS. You will then be presented
with yet another menu. (this is getting to be like a long, and drawn out RG
BBS isn't it?) There are quite a few options from this menu to chose from now.
Coose this one:
- Manage/400
Choose manage/400, (what I have access too), if you cannot access the
manage/400 option, then you are in luck. I am not sure if all systems will
allow access to manage/400 online tutorals, because it is sysadmin stuff, so
if not, the best stuff is included. and then go down to security.
Here is the outline of the system security plan. (What most systems you have
will be comprised of) This covers what most systems will have as far as
security, and how it is integrated into the AS/400.
Select Course Option
Course title . . . . . . . . :
Audience path title . . . . :
Next module . . . . . . . . :
Bookmark module . . . . . . :
Select one of the following:
Education Options
1. Start next module
3. Select module
Change Enrollment
4. Select audience path
5. Select course
Selection
_
F3=Exit F12=Cancel
>From this screen, choose option 5, then select Manage/400, if it is there.
>From the next screen, pick any option, doesn't really matter. It will then take
you back to the above screen. Then choose 3, and then choose Managing Access
Control. From there you can find the following information. Grab a coke and a
new pack of ciggarettes, because this part is LONG.
Access Control Topic: 1 Ref: 00100000.304
System Security Plan
Enter=Continue F3=Exit F12=Cancel
1/3 Purpose And Function Of A System Security Plan
Purpose
To provide evidence of a comprehensive review of the access
control requirements of your system.
Function
The plan will be used by:
1) Senior and line managers to document the organization's
requirements for access control
2/3 Purpose And Function Of A System Security Plan
Function (Continued)
The plan will be used by:
2) Computer managers, to:
a) Document the controls they intend to put in place to
meet the organization's requirements for access
control
b) Form the basis for the access control elements of
the detailed operator procedures
c) Assess the impact of system changes on access
control; for example, installation of a new menu
option
3/3 Purpose And Function Of A System Security Plan
Function (Continued)
The plan will be used by:
3) Auditors, who may be required to assess the
comprehensiveness of your system security.
1/9 What The System Security Plan Should Contain
The structure of the System Security Plan will be dictated
by the controls you decide to put in place; however, we
suggest you have three main sections:
1) Requirements for access control
In this section record access control requirements at
both the departmental and organization-wide levels.
This section should be as concise as possible and should
be easy to understand by staff throughout your
organization.
2/9 What The System Security Plan Should Contain
1) Requirements for access control (continued)
Specifically, you should not refer to computer
facilities in this section. Instead describe the
requirements which will lead to implementation of access
controls.
Your requirements should include an inventory of what
you need to protect together with an indication of the
severity of a breach in security. The inventory should
contain specific entries such as trade secrets, as well
as more general items such as your program library.
3/9 What The System Security Plan Should Contain
1) Requirements for access control (continued)
The inventory will be useful to you in:
a) Identifying what you need to protect
b) Setting priorities for implementing your system
security strategy.
4/9 What The System Security Plan Should Contain
2) Provisions for access control
In this section describe the provisions you intend to
make for access control. We suggest you describe these
provisions using the topic headings from this module:
a) User IDs And Passwords
b) Menu-based Access Controls
c) Object-based Access Controls
d) Data Level Access Controls
e) Access To Communications Lines
f) Physical Access Controls
g) People Controls
h) Additional Access Controls.
5/9 What The System Security Plan Should Contain
2) Provisions for access control (continued)
Under each heading, describe the controls you intend to
put in place together with the people who will be
responsible for:
a) Defining authorities under the control
b) Maintaining the control
c) Enforcing the control.
6/9 What The System Security Plan Should Contain
2) Provisions for access control (continued)
Note that it is not our intention that you should
describe procedures in detail in this document. Instead
the System Security Plan will describe the procedures
which are required and who has the responsibility for
putting them in place.
Where you are responsible for implementing procedures,
you should describe them in the System Operations
Procedure Manual (See the Managing System Operation
module of Manage/400).
7/9 What The System Security Plan Should Contain
2) Provisions for access control (continued)
Where you are responsible for executing procedures on
behalf of others, you should describe them in the Data
Control Manual (See the Managing User Support module of
Manage/400).
8/9 What The System Security Plan Should Contain
3) Implementation strategy
It is likely that, if you are starting from scratch,
your strategy might take some time to implement. Your
plan should indicate the sequence in which you will
implement provisions.
It is also likely that you will be asked to provide an
indication of how long the implementation will take. As
a minimum, you should describe contingencies (for example,
the provisions that need to be in place before a new
system goes live).
9/9 What The System Security Plan Should Contain
4) Requirements which will not be implemented
It is likely that some access control requirements will
not be implemented because:
a) You do not have the necessary technology or software
function to support them
b) They would be too costly to implement
c) They would be too restrictive to legitimate users.
You should, however, document that this is the case so
that they can be reconsidered when access controls are
reviewed.
1/2 How To Build A System Security Plan
We describe how to build a System Security Plan in two
sections. The first provides advice on the mechanics of
producing the System Security Plan. The second provides an
overview of the different kinds of access control you should
consider for inclusion in your plan. We provide further
details on the different kinds of access control in
subsequent topics of this module.
2/2 Selecting The Next Section
Select one or press Enter to review each option in turn:
1. Producing The System Security Plan
2. The Kinds Of Access Control Available To You
3. Complete This Subtopic
1/14 Producing The System Security Plan
In order to produce a System Security Plan, you have to
balance two main sets of factors:
1) Cost versus effectiveness
Completely effective security is elusive even to those
with very high budgets. You will have to help your
organization decide on how to put in place an adequate
set of controls for a reasonable level of expenditure.
2/14 Producing The System Security Plan
1) Cost versus effectiveness (continued)
For example, you are unlikely to be able to afford the
kinds of building access control equipment used by high
security installations. However, the AS/400 allows you
to implement very effective protections against
unauthorized access by programming staff, at relatively
low cost.
3/14 Producing The System Security Plan
2) Inconvenience versus effectiveness
Any access control involves some inconvenience for those
who are subject to the control. You will need to ensure
that security procedures are not so onerous that they
discourage, or even prevent, legitimate access.
For example, most people will (reluctantly) accept the
need for User IDs and passwords. You will, however,
need to consider how often people should change their
passwords.
4/14 Producing The System Security Plan
In order to achieve these balances, you will need to:
1) Determine the kinds of access control that are available
to you.
2) Discuss access control requirements with Senior and
Departmental managers.
During this first pass you should try to encourage
people to drop excessive or arbitrary requirements.
5/14 Producing The System Security Plan
2) Discuss access control requirements with Senior and
Departmental managers (continued)
It might be helpful to consider requirements in terms of
the following broad risk categories:
a) Loss through occurrence of error
b) Loss through disruption of computer services
c) Theft of money or goods
d) Theft of computer resources
e) Loss through disclosure of sensitive information.
6/14 Producing The System Security Plan
3) Where you do not see an obvious way to implement an
access control requirement, carry out further research
and, possibly, investigate the cost of additional
equipment or upgrades to your software.
4) Return to discuss access control requirements with
Senior and Departmental managers, taking care to
investigate and resolve any inconsistent requirements
you are given.
7/14 Producing The System Security Plan
A particular problem which regularly occurs during these
kinds of investigation is that, we tend to want to
restrict access to information unless there is a good
reason for someone to have it. As a result, requirements
are often expressed in an arbitrary and extreme way.
8/14 Producing The System Security Plan
For example, we know of one Managing Director who considered
it particularly important for the computer to prevent people
in his organization from finding out how much he was paid
and the expenses he collected. He did not realize that:
1) As the highest paid director, his salary was in the
public domain
2) Everyone in the Accounting Department, and everyone who
authorized purchase orders, had access to a filing
cabinet containing his expenses details.
9/14 Producing The System Security Plan
Also, it is common to find people still thinking in terms of
old, report-based systems. These systems commonly produced
reports intended for relatively small work groups who then
had the responsibility to interpret them for others.
For example, the Accounting Department often had a monopoly
over financial information.
In modern online systems, access to the corporate database
is spread much wider. The requirement to restrict access to
data is therefore superseded by a need for education and
training.
10/14 Producing The System Security Plan
To eliminate arbitrary, extreme and out-dated requirements,
you should try to ensure that:
1) All requirements for access control are expressed in
terms of the real needs of your organization
2) Managers understand the implications of implementing
their access control requirements in terms of cost,
effort and, possibly, discouraging use of the system.
It is usually more appropriate to think of everyone having
access to everything unless there is a good reason why not.
11/14 Producing The System Security Plan
If you are still presented with extreme requirements, it is
often possible to demonstrate their impracticality outside
the computer environment.
People are usually less zealous about access controls
external to their computer systems.
12/14 Producing The System Security Plan
As soon as you have a reasonable picture of requirements for
access control and the kinds of control that are needed to
implement them, you should start producing your System
Security Plan. Having produced your first draft, ask your
Senior and Departmental managers to review it to see:
1) Whether you have correctly understood their requirements
2) Whether they are prepared to accept the overheads needed
to implement suitable controls.
3) Whether your suggested implementation strategy correctly
reflects organizational priorities.
13/14 Producing The System Security Plan
Even if you eventually agree not to implement an access
control requirement you should still document it as a
requirement which will not be met. Not only is this more
gracious to your Senior and Departmental managers, you might
find that the control can be implemented, having:
1) Learned a bit more about what your system can do
2) Discussed the requirements with other experienced people
3) Installed upgrades to your software.
14/14 Producing The System Security Plan
Before producing your final version of the System Security
Plan you should consider asking someone else to review it
for technical and functional adequacy. Possibly from one or
more of:
1) Your group Information Systems function
2) Your computer audit function
3) Your applications software supplier
4) IBM.
1/10 The Kinds Of Access Control Available To You
When describing what the System Security Plan should
contain, we suggest describing the provisions you intend to
make under the following headings:
1) User IDs And Passwords
2) Menu-based Access Controls
3) Object-based Access Controls
4) Data Level Access Controls
5) Access To Communications Lines
6) Physical Access Controls
7) People Controls
8) Additional Access Controls.
2/10 The Kinds Of Access Control Available To You
In this section we provide a brief overview of each kind of
control.
In the subsequent topics of this module we provide more
details on each one.
3/10 The Kinds Of Access Control Available To You
1) User IDs And Passwords
All the computer-based access controls are based on the
principle of users:
a) Identifying themselves through a unique personal
User ID which is public knowledge
b) Proving they are who they claim to be through entry
of a password known only to that user.
You will need to ensure disciplined use of User IDs and
passwords to ensure continued effectiveness of your
computer-based access controls.
4/10 The Kinds Of Access Control Available To You
2) Menu-based Access Controls
This is the primary method of computer-based access
control in use at most sites. Computer services are
presented to users as items on menus. Each user is
assigned a relevant subset of all the available
services. Any other services either do not appear, or
attempts to use them are rejected by the menu system.
5/10 The Kinds Of Access Control Available To You
3) Object-based Access Controls
are imposed by the AS/400 and cannot be by-passed by
users or by programs. They are useful for users who are
not bound by menu-based access controls, typically:
a) The Security Officer
b) The system operators
c) Development staff
d) Users of end-user computing tools such as AS/400
Query and PC Support.
6/10 The Kinds Of Access Control Available To You
4) Data Level Access Controls
are used to restrict access to certain kinds of data
which cannot be expressed in terms of menu options.
For example, you might want to restrict access to
certain areas of your organization's accounts. Your
application software might have a general inquiry
service which, when used to request data, checks
authority at the data level.
Alternatively, you might want to provide users with
Query access to a personnel file, but not to wages
details.
7/10 The Kinds Of Access Control Available To You
5) Access To Communications Lines
Special attention needs to be paid to communications
lines because you might have very little scope for
supervising who is using your system. Although recent
court rulings have made it clear that so-called computer
hacking is illegal, you are still expected to ensure
that adequate access controls are in place.
8/10 The Kinds Of Access Control Available To You
6) Physical Access Controls
Protecting access to data and programs is only one
aspect of system security. Access to computer data also
depends on preventing unauthorized people from gaining
access to computer equipment, removeable media and
computer output.
Also, if you are not careful, your organization might be
creating a dual standard: one for computer data and
another for other written documents. If your controls
over written documents are weak, you risk bringing all
forms of access control into disrepute and all your
effort might be undermined.
9/10 The Kinds Of Access Control Available To You
7) People Controls
There are various methods you can use to help prevent
people from making accidental misuse of your system.
We all hope that we will not employ people who will
attempt to gain malicious access to our systems.
However, such people do exist. You need to:
a) Detect unsuitable candidates when recruiting staff
b) Draw the line between acceptable and unacceptable
behavior from staff you employ
c) Minimize the potential for malicious use of system
services
10/10 The Kinds Of Access Control Available To You
7) People Controls (continued)
d) Ensure disciplinary procedures are effective
e) Try to prevent staff from harboring a grievance
against your organization.
8) Additional Access Controls
Finally, there are several controls which are a
by-product of good management practice implemented in
other areas. For example integrity checks you introduce
into routine procedures might also be able to detect
inadvertent data corruptions.
If you haven't noticed as of yet, Manage/400 is the tutoral system that
is used to Manage an AS/400 system, so these tutorals are for the sys admins
basically. The next topic that I think is important out there, is the User IDs
and Passwords subtopic, of the security topic.
The following subtopics describe how to use and maintain
User IDs and passwords.
The examples given in this topic assume Resource Level
security (level 30) since this is the level we generally
recommend for users of the AS/400.
If you are unsure what security levels are, we suggest you
use the Route Map (via F3) to jump ahead to topic 5,
subtopic 3 which describes security levels. You should then
use the Route Map to return here (Topic 3).
Select Subtopic
Select one of the following:
1. Using User IDs And Passwords
2. Password Discipline
3. IBM-Supplied Profiles
4. AS/400 Security Officer
1/9 Using User IDs And Passwords
Most computer-based access control mechanisms require people
to go through a sign-on process to:
1) Identify themselves to the system
2) Prove they are who they claim to be.
On the AS/400, this is normally implemented through a User
ID and password scheme. The User ID is public knowledge and
is used by system operators, for example, to identify who is
using a given terminal. The password is kept private,
however, since it is the password that proves a user is who
he or she claims to be.
2/9 Using User IDs And Passwords
The standard AS/400 sign on screen contains User ID and
password fields. Note that the password is a non-display
field; data is not displayed as you enter it. This makes it
more difficult for on-lookers to see what you type (although
you should be aware that some people get quite adept at
reading passwords from the keys as you press them).
3/9 Using User IDs And Passwords
Although User ID and password schemes are the most common
ways to control access, there are other possibilities, for
example:
1) Passwords can be supplemented by personal questions like
'What is your mother's maiden name?'. Typically, each
user is asked to supply, say, twenty questions and short
answers to each one. The computer then selects one or
two at random during each sign on. The answers selected
by users do not have to be truthful, just something they
are able to remember.
4/9 Using User IDs And Passwords
2) Devices can be attached to terminals which require some
form of physical identification; for example, a magnetic
stripe reader or a signature verification device.
3) Data can be encrypted using a key supplied by authorized
users. This approach can be used to secure data against
even the administrator of the password scheme.
5/9 Using User Ids And Passwords
Also, passwords do not have to be allocated to individuals:
1) A common User ID and password can be used by an entire
work group
2) Passwords can be allocated to levels of service rather
than individuals. When a user wishes to use a sensitive
service he/she is required to enter the relevant
password.
6/9 Using User Ids And Passwords
Shared passwords are usually used because they save people
from having to sign on and off shared terminals.
In practice, however, use of shared passwords results in:
1) Poor password discipline
2) Difficulties in keeping people up-to-date with shared
passwords
3) An inability to produce adequate audit trails.
7/9 Using User Ids And Passwords
For these reasons we recommend you do not use shared
passwords except for services which do not compromise system
security. For example, you might wish to publicize
information about your organization through an electronic
bulletin board which does not contain sensitive data.
This illustrates a general principle of access control: you
need to find a suitable balance between the effectiveness of
controls and user inconvenience and cost of providing the
controls.
8/9 Using User Ids And Passwords
All forms of access control have their weaknesses.
Guaranteed security is not achievable and the highest levels
of security are only available at great expense and are
usually onerous to staff who have to use them. In this
module we describe methods of access control which have a
general application in modern business systems. If your
security requirements are particularly high, we suggest you
seek specialist security advice in addition to considering
the measures we describe in this module.
9/9 Summary
1) The most common method for controlling access to the
AS/400 is a User ID and password scheme although more
sophisticated methods are available
2) The use of shared passwords is, in general, discouraged
3) You need to find a balance between effectiveness and
inconvenience/cost
4) Seek specialist advice if you have particularly high
security requirements.
1/29 Password Discipline
In order to ensure passwords are kept secret, you need to
instil certain disciplines into your organization about the
way they are used, covering:
1) Regular password changes
2) Sensible choice of new passwords
3) Care during password entry
4) Sign-off of unattended terminals
5) Disclosure
6) Documenting of passwords.
Each of these is discussed in the following sections
together with methods for ensuring your password discipline
is observed.
2/29 Password Discipline
During this subtopic we make several references to system
values. These are control values which allow you to tailor
some aspects of OS/400 to your needs. All the system values
and the method for changing them are described in detail in
the AS/400 Work Management Guide.
3/29 Password Discipline
1) Regular password changes
If passwords are not changed, then the risk of them
becoming known to others increases over time. Also, by
changing passwords, users limit the possible damage that
might be caused by inadvertent disclosure. Finally,
regular password changes are a useful way to remind
people about security and the importance attached to it
within your organization.
You can arrange for users to be able to change their own
password by providing them with a menu option to call
command CHGPWD. This command doesn't have any
parameters.
4/29 Password Discipline
1) Regular password changes (continued)
There are several ways to ensure passwords are changed
regularly:
a) You can arrange for new passwords to be allocated to
individuals, say, once a month. This has the
advantage of guaranteeing new passwords are used but
does not allow users to choose passwords they are
likely to remember. There is therefore a greater
likelihood people will write passwords down and
leave them for others to see.
5/29 Password Discipline
1) Regular password changes (continued)
It is also possible that new passwords will be
intercepted in the internal mail unless you arrange
for them to be delivered personally or, possibly,
through the system itself.
Note, you can use a computer program to generate
random passwords. However, you should be aware that
it is not simple to generate true random numbers
this way. You should make sure that 'random'
sequences cannot easily be recreated by others using
the same program.
6/29 Password Discipline
1) Regular password changes (continued)
b) You can use system value QPWDEXPITV to force users
to change their password in a given time interval.
Users are warned their password is about to expire
for seven days before the expiration date. You can
override this requirement, or set a different
expiration period for individual user profiles
through the PWDEXPITV parameter of the Change User
Profile (CHGUSRPRF) command.
7/29 Password Discipline
1) Regular password changes (continued)
Again, this ensures regular changes and is the
approach we usually recommend, but some users will
object to the system forcing them to change their
passwords and they might look for ways to get around
the process.
8/29 Password Discipline
1) Regular password changes (continued)
For example, they might have two passwords which
they continually switch between. You can prevent
this by setting system value QPWDRQDDIF to '1' which
causes the AS/400 to verify that a new password does
not match any of the previous thirty-two passwords.
However, you should be aware that this can be very
irritating to users and you should explain the need
for it in your Terminal Operator's Guide.
9/29 Password Discipline
1) Regular password changes (continued)
c) You can use the Display Authorized Users (DSPAUTUSR)
command, say, once a month to find out users who
have not changed their passwords in the previous
month.
You can then send them a memo asking them to change
their password. Follow up memos can then be sent
with copies to Senior Managers.
This is the approach most users would prefer, but it
requires more effort and administration than other
methods.
10/29 Password Discipline
2) Sensible choice of new passwords
If people are asked to select their own passwords, they
will obviously want to choose ones they are likely to
remember in the future. Most password breaches,
however, occur because 'hackers' are able to guess
passwords. Common selections are:
a) Names of family members
b) Favorite football or cricket teams
c) Telephone numbers
d) Vehicle registrations
e) 'A', 'FRED', 'PASSWORD', 'TEST' or the person's User
ID.
hehehe "hackers", nice security on this system... :)
11/29 Password Discipline
2) Sensible choice of new passwords (continued)
OS/400 does not allow even the Security Officer to see
other people's passwords. If you want to review
passwords, you will have to introduce a program to store
passwords in a data file before changing the user's
profile. One way to do this is to write the program as
a password validation program identified through system
value QPWDVLDPGM. Note that you would have to use
object-based access controls to ensure this data file
cannot be read by unauthorized staff (see topic 5 of
this module).
12/29 Password Discipline
2) Sensible choice of new passwords (continued)
Alternatively, you can use AS/400 system values to
switch on one of the following checks for all new
passwords:
a) QPWDMINLEN and QPWDMAXLEN to set the minimum and
maximum length of passwords (discourages use of, for
example, single character passwords)
b) QPWDLMTCHR to disallow up to ten given characters
c) QPWDLMTAJC to disallow adjacent digits (discourages
use of telephone numbers and PIN numbers)
13/29 Password Discipline
2) Sensible choice of new passwords (continued)
d) QPWDLMTREP to disallow character repetition
(discourages of passwords like: AAAAAAA)
e) QPWDPOSDIF to force every character to be different
from the previous password (discourages use of very
similar passwords)
f) QPWDRQDDGT to force at least one numeric digit
(discourages use of names, for example).
14/29 Password Discipline
If these are not appropriate to your situation, you can
elect to supply your own validation routine (via system
value QPWDVLDPGM). However, you will have to ensure
this routine is safeguarded because it intercepts all
new AS/400 passwords entered through the Change Password
(CHGPWD) command, and a modified version could pass them
outside the security environment.
Again, the approach likely to be most popular with users
is that they be allowed complete freedom to select new
passwords.
15/29 Password Discipline
3) Care during password entry
You should encourage users to ensure that people do not
watch the keyboard while they enter passwords to the
system.
You should also explain to people that it is common
courtesy to look away while others enter passwords. You
should make sure that support staff (particularly those
from outside your organization) are aware of and follow
this practice.
16/29 Password Discipline
4) Sign-off of unattended terminals
People should be encouraged to sign-off when they leave
terminals unattended. This prevents someone else from
using that person's profile.
Where someone works in an open plan environment or a
shared office this might be seen as less important, but
establishing the need for vigilance and for signing-off
all terminals when an office is unattended can be
difficult to enforce.
17/29 Password Discipline
4) Sign-off of unattended terminals (continued)
You can force automatic sign-off for unattended
terminals through system values:
a) QINACTITV which determines the time period
subsystems should wait before checking for inactive
terminals (say, once every fifteen minutes)
b) QINACTMGQ which determines what subsystems should do
if they detect an interactive terminal has been
inactive since the last check.
18/29 Password Discipline
4) Sign-off of unattended terminals (continued)
You can use these variables to specify:
a) No checking is to be done
b) The current activity for the terminal should be
cancelled - you should check with your application
software supplier that this does not jeopardize data
integrity
19/29 Password Discipline
4) Sign-off of unattended terminals (continu
ed)
c) A message is sent to a message queue; this can be
used to trigger a program which can decide
appropriate action. For example, you might decide
that only certain terminals need this protection or
that different inactivity periods apply to different
terminals.
20/29 Password Discipline
5) Disclosure
People should be discouraged from disclosing their
passwords to ANYONE else, including people who are
normally given widespread information access (such as
support staff, consultants and auditors).
Occasionally, it might be necessary for support staff to
use services which are not in their user profiles; for
example, to try to reproduce a fault seen by a user.
You should use the Terminal Operators' Guide (See the
Managing User Support module of Manage/400) to make it
clear that, in this situation, users still have
responsibility for how their ID is used.
21/29 Password Discipline
5) Disclosure (continued)
The Terminal Operators' Guide should make it clear that,
at all times, users are accountable for actions taken
under their User ID. The Guide should also explain
user's rights to challenge anyone who requests access
through their User ID.
22/29 Password Discipline
5) Disclosure (continued)
You can help users detect when their ID and password
have been used by someone else, by specifying on user
profiles that:
a) A sign-on information screen is displayed when users
sign-on; this identifies, for example, when the
profile was last used - the user should report a
breach if this is not right
b) The same user cannot sign-on simultaneously at more
than one device.
23/29 Password Discipline
6) Documenting of passwords
Some users will not be able to memorize passwords.
Particularly those who do not have to use the system
frequently. They will therefore want to write passwords
down.
You should use the Terminal Operators' Guide to explain
the danger of leaving written copies of the password
lying around. In some sites we have even seen passwords
taped onto terminals!
24/29 Password Discipline
6) Documenting of passwords (continued)
Some passwords will be known to only one or two people.
It might therefore be necessary to write them down to
ensure they are available at times of emergency when key
staff are not available.
The usual procedure is to keep the password in a sealed
envelope kept in a (preferably fireproof) safe. You
should make sure the envelope is completely sealed
(there is a well-known method of removing and replacing
the contents of envelopes through the gap at the top)
and that the seal is inspected regularly.
25/29 Password Discipline
To a significant degree, any password mechanism relies on
responsible attitudes from password holders. To promote
this we suggest you:
1) Make sure you have a clear business justification for
the access controls you introduce, particularly those
which are onerous to users. Otherwise:
a) You will discourage people from using your system,
unnecessarily
b) You risk weakening your entire strategy if people
find out some of your controls are arbitrary.
26/29 Password Discipline
2) Determine the extent to which you want to use the system
to enforce password discipline.
3) Explain what good password discipline is.
The obvious place to do this is the Terminal Operators'
Guide (See the Managing User Support module of
Manage/400).
27/29 Password Discipline
4) Explain the importance your organization attaches to
password discipline.
You should arrange for a reference to password
discipline to be included in the terms and conditions of
employment of users, together with a warning that
breaches will be treated as serious misconduct.
Finally, if breaches of discipline do occur, you need to
be sure that Senior and Departmental Managers will take
steps to enforce password discipline by their staff.
28/29 Summary
1) Password discipline is a key component in your access
control provisions
2) Password discipline covers:
a) Regular password changes
b) Sensible choice of new passwords
c) Care during password entry
d) Sign-off of unattended terminals
e) Disclosure
f) Documenting passwords.
3) You should make sure you have a clear business
justification for the access controls you introduce.
29/29 Summary
4) You should make sure users:
a) Understand the principles of password discipline
b) Know they are required to observe these principles
by Senior and Departmental managers.
The next section of this, gives the defaults for the system, the ones that
come with the package. With the logins and passwords.
1/9 IBM-Supplied Profiles
On the AS/400, each User ID is associated with a user
profile which contains the user's password and describes
his/her access rights.
IBM supplies the AS/400 with several user profiles already
set up for you. There are, in addition, several profiles
needed for processes internal to AS/400 operation.
It is essential that, before you use the system to store any
sensitive data, you change all the default passwords
supplied with these profiles. Failure to do this means that
anyone with knowledge of the AS/400 can sign on to your
system.
2/9 IBM-Supplied Profiles
We feel particularly strong about this because:
1) It is very easy to change IBM-supplied passwords
2) We have direct experience of a company which lost
valuable trade secrets through a Customer Engineer
password which had not been changed
3) Despite clear warnings from IBM, we commonly find
installations have not changed the IBM-supplied
passwords and are astonished with the ease with which we
are able to 'break' their security.
3/9 IBM-Supplied Profiles
If you have not already done so, you should perform the
following steps to change the default profiles:
1) Sign on as the system Security Officer (QSECOFR, default
password QSECOFR)
2) Use the Change Password (CHGPWD) command to change the
Security Officer password. Take great care as you do
this. If you change the password and lose it, you will
be unable to operate your system. We suggest you write
down the new password, place it in a sealed envelope and
lock it away.
4/9 IBM-Supplied Profiles
3) Use the Display Authorized Users (DSPAUTUSR) command to
identify all the profiles which can be used to sign on
to the system. If there is an 'X' in the 'No Password'
column, that user profile cannot be used to sign on to
the AS/400; the profile cannot jeopardize your security
scheme.
5/9 IBM-Supplied Profiles
4) Use the Change User Profile (CHGUSRPRF) command to
change the passwords for all the profiles which can be
used to sign on. If you want to use the profile, enter
a new password. Otherwise, enter PASSWORD(*NONE) to
disable the profile. Note, you should not try to delete
IBM-supplied profiles as some of them are used by
internal processes.
Note that profiles QSRV and QSRVBAS are used by IBM
service representatives. You must however change the
supplied passwords because these profiles allow access
to sensitive data
6/9 IBM-Supplied Profiles
5) Finally, use the procedure described in the AS/400
Operator's Guide to execute an attended IPL sequence and
invoke the Dedicated Service Tools (DST). When you are
asked to enter a password, enter QSECOFR. Choose the
'Change Password' option to alter the three DST
passwords.
7/9 IBM-Supplied Profiles
The IBM Customer Engineers (CEs) might need access to the
Dedicated Service Tools and the Service profiles if you
encounter a system problem or if you upgrade your system.
The CEs will not object if you (or the Security Officer)
insists on signing on for them (to avoid revealing the
relevant passwords). Nor will they object if someone
insists on supervising their activities. In fact, CEs often
enjoy explaining what they are doing and you can learn a lot
from them.
8/9 IBM-Supplied Profiles
CEs will not arrive on site without checking with you first.
So you should challenge any unexpected visitor who calls
himself an engineer. All CEs carry identification and you
can also check their authenticity through your usual call
dispatch phone number.
9/9 Summary
As soon as possible, you should change the default passwords
supplied by IBM:
1) Security Officer
2) Other IBM-supplied profiles
3) DST passwords.
The next section deals with the security officer.. and maybe even how to
override his password.
1/9 AS/400 Security Officer
Every AS/400 is supplied with a special profile (QSECOFR)
which is described as the Security Officer.
The Security Officer profile has special privileges which
allow the password holder to have access to almost any
AS/400 object including all data files and programs. The
Security Officer profile is therefore used for much of the
work of creating and maintaining access controls on the
AS/400.
Even the Security Officer does not have the ability to see
AS/400 passwords. If people forget them, the Security
Officer can enter new ones but can't tell them what the old
ones were.
2/9 AS/400 Security Officer
If the Security Officer password is forgotten, the Dedicated
Service Tools (DST) can be used to reset it to its supplied
value of QSECOFR. This process (described in the Security
Considerations chapter of the AS/400 Security Concepts and
Planning Manual) requires the DST security capability
password. If both passwords are lost your system will be
inoperable.
A common concern we encounter at AS/400 sites is: 'who
should have access to the Security Officer password?'
3/9 AS/400 Security Officer
There is a real dilemma here:
1) People who understand how to use the Security Officer
password present a threat to system security.
2) People who do not understand how to use the Security
Officer password have to:
a) Either sign on so others can use the password
b) Or execute commands dictated to them by others
In either case, the password holder has no way to check
what is going on.
4/9 AS/400 Security Officer
To resolve this, we recommend one of the following two
approaches:
1) Allocate the password to someone with computer
expertise, but only if the risk is balanced by the trust
Senior Managers have in the individual.
5/9 AS/400 Security Officer
2) Allocate the password to someone without computer
expertise and insist that the following procedure is
adopted for each use of the password:
a) The person wishing to use the password should write
down in advance the commands they intend to use, and
why. You can then arrange for a random check of,
for example, the source code of programs the person
intends to use. You should keep the document
secured for review later on, to check that the use
was justified.
6/9 AS/400 Security Officer
2) Procedure for using the Security Officer password
(Continued)
b) The password holder should sign on and either
perform the necessary commands or supervise their
entry by the requester
c) The password holder should then sign off using the
*LIST option (which causes a log of the commands
entered to be generated)
7/9 AS/400 Security Officer
2) Procedure for using the Security Officer password
(Continued)
d) The forms and output from the session should be
filed in the Implementation Log (See the Managing
Change module of Manage/400) with a copy filed
securely so that it cannot be interfered with before
there has been an opportunity to audit it.
Occasionally, without warning, someone from outside your
organization with knowledge of the AS/400 should be
asked to review changes and procedures to ensure they
are appropriate to the stated purpose.
8/9 AS/400 Security Officer
In any case, you should ensure that the Security Officer
profile is not needed for routine use. Instead it should
only be needed in exceptional situations. This is likely to
mean that the Security Officer profile will have to be used
to create new profiles for programming staff and system
operators (See the topic: Object-based access controls in
this module).
You might also consider arranging for the Security Officer
profile to be available at only some of the terminals on
your system. We explain how to do this in subtopic 5 of
this topic.
9/9 Summary
1) The Security Officer profile has privileged access to
the system; you must take care not to 'lose' it
2) You need a strategy for using the password, that fits
your situation
3) You should make sure the Security Officer password is
not needed for routine system tasks
4) You should consider restricting the number of terminals
which can be used by the Security Officer.
The next section i will include is, the Access to Communications section.
In this topic, we describe approaches to controlling access
from outside your organization through communications lines.
Select Subtopic
Select one of the following:
1. Electronic Customer Support
2. Communications Lines
1/4 Electronic Customer Support
We recommend in Manage/400 that you use the IBM-supplied
modem to make good use of the Electronic Customer Support
(ECS) facilities available to you.
You might be concerned that this facility can be used by
people outside your organization to dial in to your system
in order to gain unauthorized access. In particular, if you
use the remote power-on feature, you are required to set the
modem so it answers telephone calls automatically.
2/4 Electronic Customer Support
The most common ways to use the IBM modem are for:
1) Dialling out to IBM's DIAL service
2) Dialling out to IBM's Customer Engineering services
3) Remote power-on which requires the modem to answer an
incoming call, but which does not require a
communications session to be established.
Therefore, there is no inherent need for OS/400 to respond to
incoming calls. The default ECS environment supplied by IBM
cannot be used by someone dialling in to establish a
connection with your system.
3/4 Electronic Customer Support
You can ensure this is still the case by signing on to the
system as the Security Officer and entering the commands:
CHGLINSDLC QTILINE SWTCNN(*DIAL)
CHGLINSDLC QESLINE SWTCNN(*DIAL)
while the modem is not being used for connecting to DIAL or
the Customer Engineers. These commands direct the system to
allow the ECS environment to be used only for dialling out.
4/4 Electronic Customer Support
If, however, your support organization uses the IBM-supplied
modem to dial in to your system, you should not use these
commands because they might disable this facility. Instead
you should consider the controls described in the next
subtopic.
1/5 Communications Lines
Before explaining the various controls available to you to
secure communications lines, you might find the following
definitions helpful.
The AS/400 uses Line descriptions, Controller descriptions
and Device descriptions to control the way communications
sessions are established.
1) Line descriptions define the way you want to use
physical links such as telephone lines.
2/5 Communications Lines
2) Controller descriptions define the characteristics of
the remote system or device controller you are
connecting with; for example, you might create a
connection with another AS/400, or a controller with
displays and printers attached to it.
3) Device descriptions define the characteristics of
devices you want to communicate with. Devices can be
physical, such as displays and printers, or logical such
as a pass-through session or a program interface.
3/5 Communications Lines
Communications lines can be 'switched' or 'non-switched':
1) Switched lines use public telephone systems to dial
remote users and establish connections when they are
needed. Alternatively, a remote user can dial a
switched line in order to establish a connection with
your system.
2) Non-switched lines are permanent connections to a remote
site or sites. They cannot be used by anyone else
directly, although the more sophisticated networks
include the ability to use a switched line if a primary
connection fails.
4/5 Kinds Of Access Controls For Communications Lines
The kinds of access control available for communications lines are listed
below.
Select one or press Enter to review each option in turn:
1. Denying access
2. Operator controlled access
3. Controlling automated access
4. Additional possibilities
5. Complete This Subtopic
1/13 Denying Access
People situated remotely can access your system in two main
ways:
1) They can dial in to switched lines or, possibly,
switched backups to non-switched lines
2) They can use a range of AS/400 connectivity features to
use non-switched lines for unauthorized purposes or,
possibly, to access data they would normally not be
allowed to use.
2/13 Denying Access
It might therefore be appropriate to establish barriers
which prevent:
1) Dial-in access to communications lines
2) Use of general facilities which are not needed in your
organization.
We describe the methods available to you in the following
sections.
3/13 Denying Access
1) Preventing dial-in access to communications lines
There are four basic methods available to you:
a) You can ensure that inactive line descriptions are
permanently 'varied off', this renders the line
description inactive, and therefore unusable, until
they are varied back on.
Note: a line can have more than one description,
although only one can be varied on at any time.
4/13 Denying Access
1) Preventing dial-in access to communications lines
(continued)
Use the Work With Configuration Status command:
WRKCFGSTS *LIN
to list all the line descriptions on your system and
place a '2' (vary off) in the option column next to
all the descriptions you don't want to use and press
Enter.
5/13 Denying Access
1) Preventing dial-in access to communications lines
(continued)
Then use the WRKLIND *ALL command to list line
descriptions for modification and use '2' in the
option column against the relevant line descriptions
with:
ONLINE(*NO)
in the parameter field and press Enter. This
prevents OS/400 from varying on the line description
automatically in subsequent system initializations.
6/13 Denying Access
1) Preventing dial-in access to communications lines
(continued)
b) You can delete redundant line descriptions.
If a line does not have a line description, it
cannot be used for any kind of communication.
Use the WRKCFGSTS command as before to vary off the
relevant devices.
7/13 Denying Access
1) Preventing dial-in access to communications lines
(continued)
Then use the Work With Line Descriptions command:
WRKLIND *ALL (or F14 on the WRKCFGSTS display)
to list line descriptions for modification and use
option 4 to delete the superfluous descriptions.
8/13 Denying Access
1) Preventing dial-in access to communications lines
(continued)
c) You can instruct OS/400 not to accept calls on
switched lines.
Use the WRKCFGSTS command as before to vary off the
relevant devices.
9/13 Denying Access
1) Preventing dial-in access to communications lines
(continued)
Then use the WRKLIND command to list line
descriptions for modification and use option 5 to
display details for all lines of type: *ASYNC, *BSC
and *SDLC. If any have a connection type of *SWTPP
(switched line) you can use WRKLIND option 2 with
the parameter:
SWTCNN(*DIAL)
to limit use of the relevant line descriptions to
dial out only.
10/13 Denying Access
1) Preventing dial-in access to communications lines
(continued)
d) You can configure your modem equipment so that calls
are not answered automatically. Instead, operator
intervention is required. The method for doing this
is usually a switch on the modem, but should be
described in its operating instructions.
Alternatively, you can use modem equipment which is
incapable of answering incoming calls.
11/13 Denying Access
2) Preventing use of general facilities
Use one or more of the following Change Network
Attribute (CHGNETA) commands to do this:
a) CHGNETA JOBACN(*REJECT)
Causes your system to reject all job streams sent to
your system over communications lines (this does not
affect the normal submit job mechanism).
12/13 Denying Access
2) Preventing use of general facilities (continued)
b) CHGNETA DDMACC(*REJECT)
Causes your system to reject all attempts from
remote systems to use Distributed Data Management to
access files on your system.
c) CHGNETA PCSACC(*REJECT)
Causes your system to reject requests from Personal
Computers via PC Support.
13/13 Denying Access
2) Preventing use of general facilities (continued)
You can also use system variable QRMTSIGN to disable
access to your system via display station pass through.
1/5 Operator Controlled Access
You can control access to non-switched lines by using the
Work With Configuration Status (WRKCFGSTS) or Vary
Configuration (VRYCFG) commands to vary lines, controllers
and devices on and off as required.
For example, a line cannot be used unless it has been varied
on: you can therefore arrange for the connection to a branch
office to be active only when staff need to use it.
In the previous section we explained how to ensure that
lines are not varied on automatically during system
initialization.
2/5 Operator Controlled Access
For dial-in access to switched communications lines, you can
ensure that requests can only be accepted manually.
This is usually done via a system operator, but can be
anyone with physical access to the handset attached to the
communications line and authority to the Answer Line
(ANSLIN) command.
3/5 Operator Controlled Access
The person wishing to make the connection calls the operator
who speaks to the caller and verifies the connection request
is valid. The operator can then invoke the command:
ANSLIN linename
possibly via a menu option and, when requested by the
AS/400, press the data button on the telephone handset to
make the connection.
4/5 Operator Controlled Access
To implement this approach use the following Work With Line
Descriptions command:
WRKLIND *ALL
to list all the line descriptions on your system. Use
option 5 to display details for all lines of type: *ASYNC,
*BSC and *SDLC.
5/5 Operator Controlled Access
If any items on the WRKLIND display have a connection type
of *SWTPP (switched line) or Activate switched network
backup set to *YES (Switched backup line can be used), use
option 2 with the parameter:
AUTOANS(*NO)
to enforce a manual answering procedure.
1/16 Controlling Automated Access
It is likely that, if you have dial-in lines which are in
frequent use, you will want to make it as straightforward as
possible for authorized users to establish connections. It
will probably be inappropriate for operators to have to
intervene to manually answer a call. You will therefore
rely on computer-based access control to preserve security.
Similarly, if you have non-switched lines you will rely on
computer-based access controls to be sure that they are not
used for unauthorized purposes.
2/16 Controlling Automated Access
This is actually a reasonably sensible approach: one can get
over-concerned about access over communications lines. It
might be much easier to gain physical access to your
offices. The underlying strength of your security strategy
is the key issue to concentrate on.
3/16 Controlling Automated Access
You should consider the protection you want to put in place
against the following kinds of access:
1) Remote display devices, including Personal Computers
emulating displays
2) Remote printers, again including PC emulators
3) Inter-system connections initiated on your system
4) Inter-system connections initiated by remote systems.
4/16 Controlling Automated Access
The access controls we describe in this module apply to all
users of your system, regardless of whether they are sited
locally or remotely. The following sections describe the
provisions which are specific to communications users.
5/16 Controlling Automated Access
1) Remote display devices
Your principal form of access control is the User ID and
password. We recommend that, in general, you should use
the Change System Variable command:
CHGSYSVAL SYSVAL(QMAXSIGN) VALUE('3')
to ensure that a display is varied off if a user
attempts to sign-on unsuccessfully three times in a row.
This is particularly important for dial-in lines because
it prevents someone from trying a number of different
passwords until they get lucky.
6/16 Controlling Automated Access
2) Remote printers
Printers can be susceptible because they do not need a
user to sign on. The system automatically starts a
writer for printers when they connect to the system, and
any documents which are ready to print can then start.
It is therefore possible that output can be sent to an
unauthorized user.
7/16 Controlling Automated Access
2) Remote printers (continued)
However, the first thing a writer does when it starts
printing, is to print a single line and it then sends a
message asking if the line-up is correct. You specify
on the device description which message queue to use,
the default is the system operator message queue (QSYSOPR).
It is likely that you will want to specify that line-up
messages are sent to a display device sited near the
printer.
8/16 Controlling Automated Access
2) Remote printers (continued)
You can do this with the Change Device Description -
Printer command:
CHGDEVPRT DEVD(printer name) MSGQ(QSYS/display name)
For general operation, this means that someone needs to
sign on to the specified display in order to start
printing documents. This gives some assurance that the
correct (ie authorized) printer is on the other end of
the line.
9/16 Controlling Automated Access
2) Remote printers (continued)
For complete security, you will also need to ensure that
the message queue is not left in (default) *DFT mode.
This instructs the AS/400 to respond to messages with a
default reply and for the line-up message, this says
ignore the line-up and continue printing.
Alternatively, you can execute the following Change
Message Description command:
CHGMSGD MSGID(CPA4002) MSGF(QCPFMSG) DFT(C)
so that the default reply is 'C' which cancels the
writer and stops any printing.
10/16 Controlling Automated Access
3) Inter-system connections initiated on your system
People outside your system do not need any special
authority since connections are initiated from your
system.
In practice, there is unlikely to be potential for
by-passing security in this situation, particularly if
one of the following is true:
a) The program which initiates the connection has
limited function.
11/16 Controlling Automated Access
3) Inter-system connections initiated on your system
(continued)
For example, Telex/400 initiates a program which
automatically responds to telex messages. Although
the public has access to this program through the
telex network, Telex/400 ensures this cannot be used
to breach your security.
b) The program is run under a user profile with limited
object access capability. Even if users are able to
take advantage of such a program, your object access
controls will protect your system.
12/16 Controlling Automated Access
3) Inter-system connections initiated on your system
(continued)
You should, however, make sure you understand the
purpose and function of all programs which use
communications lines. At any time, you can find out
which programs are using communications lines through
option 5 (Work with job) of the Work With Configuration
Status (WRKCFGSTS) display.
13/16 Controlling Automated Access
4) Inter-system connections initiated by remote systems
In order for an inter-system connection to be
established from outside your system, there needs to be
an active subsystem which contains a communications
entry which matches the request.
You can therefore restrict this kind of communication
by:
a) Not running subsystems with communications entries.
Note that both the environments supplied by IBM
(QBASE and QCMN) have such entries, so you might
consider creating new, tailored subsystems.
14/16 Controlling Automated Access
4) Inter-system connections initiated by remote systems
(continued)
b) Removing communications entries from the subsystems
you intend to use.
c) Changing the communications entries to limit their
scope. In particular, any entry with a default user
can be evoked without a User ID and password. The
default user profile is used instead. If entries
have a default user (DFTUSR) entry of *NONE, all
evocations (requests for connection) must specify a
User ID and password or they will be denied.
15/16 Controlling Automated Access
4) Inter-system connections initiated by remote systems
(continued)
We suggest you execute the following Change
Communications Entry (CHGCMNE) commands to limit the
scope offered by the IBM-supplied environments:
CHGCMNE SBSD(subsystem) DEV(*APPC) DFTUSR(*NONE)
CHGCMNE SBSD(subsystem) DEV(*ASYNC) DFTUSR(*NONE)
CHGCMNE SBSD(subsystem) DEV(*BSCEL) DFTUSR(*NONE)
CHGCMNE SBSD(subsystem) DEV(*SNUF) DFTUSR(*NONE)
Where 'subsystem' is QBASE if QBASE is your controlling
subsystem, or QCMN if it is QCTL.
16/16 Controlling Automated Access
4) Inter-system connections initiated by remote systems
(continued)
The Using Work Management Functions chapter of the
AS/400 Work Management Guide provides more information
on how to maintain subsystem descriptions.
1/10 Additional Possibilities
You might need to consider some of the following
possibilities:
1) Data encryption
2) Dial-back
3) Protection against unauthorized access through protocol
converters
4) Modem set-up.
The following sections cover each point in more detail.
2/10 Additional Possibilities
1) Data encryption
Encryption is a method for scrambling data using a key
known only to people authorized to access the data. It
offers two major benefits:
a) If someone is able to break your security and gain
access to data, encryption presents another level of
security.
b) Your system might hold a limited amount of data that
has to be kept secret from even the Security
Officer.
3/10 Additional Possibilities
1) Data encryption (continued)
Encryption allows you to preserve security even if two
separate groups have highly confidential information
which they do not want to disclose to each other.
You have a number of encryption facilities available:
a) AS/400 Cryptographic Support is a licensed program
which uses encryption to protect information in
transmission over communication lines, or stored in
media such as tapes and disks. More information is
provided in the AS/400 Cryptographic Support User's
Guide.
4/10 Additional Possibilities
1) Data encryption (continued)
b) The QUSRTOOL library supplied with OS/400 contains a
utility called SCRAMBLE which you can use to encrypt
and decrypt data.
c) You can add encryption equipment to your
communications lines. Normally this is only
appropriate for non-switched lines. An encoder,
which is transparent to IBM protocols, is required
at each end of the connections you want to protect.
5/10 Additional Possibilities
1) Data encryption (continued)
d) There are a large number of encryption programs
which run on Personal Computers. However, you
should be aware that although they can all be used
to deter casual access, it is extremely difficult to
implement watertight security for PCs.
If you use AS/400 PC Support to store data in shared
folders, you should be aware that some of the more
sophisticated encryption systems are incompatible
with shared folder support.
6/10 Additional Possibilities
2) Dial-back
A dial-back facility automatically accepts a dial-in
call, verifies the caller's ID and password, and
terminates the connection. It then dials the caller
back using a list of authorized telephone numbers in
order to establish the required connection.
The AS/400 does not support dial-back directly, but you
can:
a) Produce a small program to provide this facility
b) Obtain modem equipment which supports dial-back
independently of the AS/400.
7/10 Additional Possibilities
3) Protection against unauthorized access through protocol
converters
You can attach communications lines via protocol
converters in such a way that the AS/400 is unaware of
them. For example, a Twinax to Async protocol converter
allows you to add asynchronous dial-in lines that appear
to the AS/400 to be a local Twinax-attached display.
In this case you will not be able to use some of the
protections we describe in this topic. Instead, you
should ensure that the protocol converter, together with
the standard ID and password protections, are adequate
for your needs.
8/10 Additional Possibilities
4) Modem set-up
In general the protocols used by the AS/400 ensure the
AS/400 is aware when a connection to a device is broken
(for example, by a poor connection or a user switching a
device off). In these cases, the AS/400 automatically
terminates that session. If the device was a display,
the next person to connect to the system will see the
standard sign-on display.
9/10 Additional Possibilities
4) Modem set up (continued)
Asynchronous circuits, however, can be set up in such a
way that a connection always appears to be made. This
is dangerous because if a connection fails part-way
through a session, another user can dial in and continue
the session, by-passing the sign-on screen.
To ensure this doesn't happen, you should:
a) Verify with your modem suppliers that, at the AS/400
end, 'signal Data Set Ready' can be made to follow
'Data Carrier Detect' and make sure this feature is
implemented
10/10 Additional Possibilities
4) Modem set up (continued)
b) When your communications are installed you should
check that terminating the connection at the remote
end (for example, by disconnecting the modem from
the wall socket) causes the AS/400 to end all
communications sessions (messages to this effect
will be sent to the Operator Message Queue -
QSYSOPR).
5/5 Summary
1) It is reasonably straightforward to deny dial-in access
to your system
2) For low-use lines where dial-in access is required, you
can ensure operator intervention is needed
3) Your controls over other types of communications line
rely heavily on User IDs and passwords
4) Securing most forms of communication is straightforward,
but complexity increases with inter-system connections
and low cost asynchronous connections. You might need
professional advice in these environments.
Last but not least...
This topic covers various aspects of personnel management
which have a relevance to system security.
It is possible or even likely that you will not be in direct
control of some of these aspects. This makes it even more
important that your System Security Plan should ensure that
Senior Managers in your organization are alerted to the full
impact of system security on your organization.
1/12 Electronic Supervision
Electronic checks are made using the facilities of the
AS/400. They are not disruptive to staff and can be a major
deterrent because they can be conducted from anywhere in
your network, with no warning.
2/12 Electronic Supervision
You should consider using the following facilities to carry
out random checks:
1) Work With Active Jobs (WRKACTJOB)
Using this command you can display all system activity
and find out what is going on. For interactive displays
that are in use, the Display Job option helps you find
out:
a) What programs the user is using
b) What files they are using
c) What OS/400 commands they have used so far.
3/12 Electronic Supervision
2) Display Authorized Users (DSPAUTUSR)
To monitor the use of user profiles and check that:
passwords are being changed regularly and out of date
profiles are being deleted.
You should consider using WRKACTJOB and DSPAUTUSR fairly
often since the commands are simple to use and the checks
don't take much time.
4/12 Electronic Supervision
3) Display Object Description (DSPOBJD)
Consider using this command to send details of all your
production programs to a database file. You can then
analyze this file in several ways; for example, you can:
a) List the programs which have been changed since a
given date (to check the changes have been
authorized)
b) Use the file cross-reference facility of Query,
together with the previous DSPOBJD file, to identify
all additions and deletions to the program
libraries.
5/12 Electronic Supervision
You can then verify whether your change control
procedures are being used to document all changes and
spot any changes that might not have been authorized.
6/12 Electronic Supervision
4) Display Program Adoptions (DSPPGMADP)
Use this command to monitor programs which adopt
ownership access rights (particularly any owned by the
Security Officer).
5) Check Job Description User Profiles (CHKJOBDUSR)
Use this command (supplied in the OS/400 QUSRTOOL
library) to monitor use of user profiles in job
descriptions (described in subtopic 2 of topic 5 of this
module).
7/12 Electronic Supervision
We suggest you use the DSPOBJD, DSPPGMADP and CHKJOBDUSR
commands, say, once a quarter to monitor changes. If you
have programming staff, you should not give advance warning
of the test.
8/12 Electronic Supervision
6) Display Object Authorities (DSPOBJAUT)
Use this command to check that object access rights have
not been interfered with.
7) Display User Profiles (DSPUSRPRF)
Use this command to verify that user profiles have not
been interfered with. Note that you can send details to
a database file for reporting via, for example, AS/400
Query or PC Support.
9/12 Electronic Supervision
8) Check Object (CHKOBJ)
Use this command with the AUT parameter to verify that
your object-level access controls work as expected.
We suggest you use DSPOBJAUT, DSPUSRPRF and CHKOBJ on a
sampling basis in conjunction with your review of changes.
You will probably want to make sure you include checks
against some of your more sensitive files (such as a
payroll) more frequently than other, less sensitive, ones.
10/12 Electronic Supervision
Your computer audit function can also help you design a
system which produces a semi-random sample of data biased
towards large or sensitive transactions. Such a sample is
much smaller than a full audit trail and is perhaps more
likely to be reviewed thoroughly.
If you decide to take such an approach, it can often be used
by your external auditors as a key factor in gaining the
assurance they need.
11/12 Electronic Supervision
In any event:
1) A strong element of randomness should be built in
2) Take advice on an appropriate sampling percentage
3) Keep the sampling algorithm secure
4) It might be best if someone independent chooses and sets
the precise sampling criteria.
12/12 Electronic Supervision
Finally, keep evidence of the checks you have made and their
results. This will help you demonstrate the effectiveness
of your review procedures to your computer auditors.
And this concludes the basics of security and fucntions on the AS/400
system. I will update this article probably until the next Chaos-IL issue,
or by the time i will obtain more information about the AS/400.
Note! there is a FAQ, specifically for this article, and you can also mail
me regular comments.
Terminal Man: terman@hotmail.com
IRC efnet: #chaos-il
(c) 1998 Terminal Man.
08. A Novice Cellular Phreaking Manual -ver1.0-
***
***************************************************
* *
* Novice Cellular Phreaking Manual -ver1.0- *
* *
* by Terminal Man *
* *
***************************************************
_
|*|
|*|
_______|*|
/*12345678#\
|__________|
| |
| 1 2 3 |
| 4 5 6 |
| 7 8 9 |
| * 0 # |
|RclStoAlMe|
|Snd Cl End|
|-+Cellcom_|
|__________|
(c) Chaos-il 1998
Cellular phones are great tools for any hacker/phreaker.
They can NOT be traced, they are mobile, and you can easily modify them.
Although CID for cells is in the making (I am sure) all you have to do is
modify the cell over and over, and you wont get caught.
Before I teach you how to modify a cell phone. Let me teach you
the basics of how it works. Cellular companies have stations which
have honeycomb like structures called cells. Each cell is capable of
having certain number of calls and usually handles an area. The phone
sends its into to the tower, and it gets access so it can place the call.
The phone actually sends and recieves at the same time. So there are 2
channels involved. If you know one, you know the other because they are
45 appart. (simple math, if you gonna be a phreaker/hacker you can atleast
figure this out. :} )...
ESN- Electronic Serial Number
MIN- Mobile Identification Number
NAM- Numeric Assignment Module
FOVC- Forward Voice Channel
FOCC- Forward Control Channel
ROVC- Reverse Voice Channel
RECC- Reverse Control Channel
Your phone also has software in it. It has a chip with actuall
sofware written to control its functions. Each make and brand name has a
different software. Software can be modified to your advantage. You will
learn more about this later in this text.
Now that you know how it works you should know "how not to get
caught". Basically if you are doing a major hacking project, change
your physical location and the ESN.MIN pair every 2 hours or so. If you
just call some LD calls, then you can change it like ATLEAST once a day.
This is because of 3 simple things. The 1st is that the cellular company
has clonning detection, and mostly to Cellcom and Motorola.
Let's take a live shoot. For example, you are 20 miles away from the actuall
owner of a cellular phone. If he makes a call, then you make a call within
5 minutes a clonning flag goes off, because they know where you are located!
and since there is no way for him to get to where you are in 5 minutes a
security flag goes off on his account. Second reason is that they know
approximately what area you are in when you use the phone, so if they want
to catch you the'll use directional antena and catch you. Thats
why if you move around alot and change pairs alot they cant catch you! and
third reason is the owner of the phone might get charged for your calls, so
switch pairs around so that you dont ruin someones life! (have morals in all
that you do, your morals dont have to be what society wants them to be, just
set them for yourself.)
The company that makes the cell puts a permanet ESN on your phone
which is not made to be changed. It is permanently burned into a chip. Your
phone also has software thats in it. Its kinda like a cellular operation
system. Each type and brand of phone has different software. All phones
allow you to change the NAM and other features. So here lets assume you
already got a pair you want to put into the phone (I'll teach you how to
snag pairs later in this manual). There are several ways you can do that.
On some phones you can make a cable and use software on your computer to
change the esn.min pair. This software is readily available to you on
the internet. There is a second way which is 100% better then the first.
You can burn new software into your phone that will alow you to change the
ESN and store it at a different location. You can make this software if
get the original software (you gonna have to read the chip, then work
your way to the origian software) and add some minor adjustments to it.
If you do not have programming skills you can go to your web browser and
go to www.l0pht.com and go to Dr. Who's radio-phone (its in archives) and
you will find what you need there. So now you that you have that, can
now change the ESN, and you can change the MIN. Thats it! you just now
clonned a cellular phone. But dont think that is it, hundreds of other
fun things you can do with your cellular phone.
Ok. You now have a phone that allows you to change the ESN and the
NAM. But what fucking good is that gonna do you if you cant get (snarf) the
ESN.MIN pair. There are alot of ways to get pairs I will present some
methods to you that already work and at the end of this manual I will
include some ideas you can try that no one else has tried before.
Method 1
_____________________________________________________________________________
There is software available that you can use with your modified
scanner to recieve pairs using your computer. Look for it on the net.
I suggest trying all the web search engines. I have seen that stuff on
alot of pages I visited...I used Dr. Who's text that he wrote it in a way
that you guys can easily understand.
____________________________________________________________________________
Thats it. Its that simple. This works very easily, your scanner picks up the
RECC (reverse channels where the pairs are transmitted) then you just convert
them to readable format. simple!
But clonning is not all you can do with your cellular phone.
You can monitor other calls with your cellular phone also. The only
problem is handoffs. They occur because a person moves out of range from
a cell, and a handoff occurs. He gets transported to another cell.
But this can also be easily conquered. If you have a Motorola all you have
to do is put it into test mode, and unmute the audio, and go to a channel
and listen! So your cellular phone can also be a tracking and spying device.
The posibilities are unlimmited. have lots of cellular phun!
---Ideas for your hungry mind---
I have personally seen with my own eyes a Pelephone cellular pick up the
channel where ESN.MIN's are transmited (yes I heard it, the transmition
of the pairs makes the most annoying noise I have ever heard. hehehe).
so now all you gotz to do is convert them and store them.. I believe
that someday someone will create a phone that can do that. you can also
convert somehow (think hard, I wont give you this one) and store in
your computer.......I even heard rumors that someone had a phone that
works like this: you put the number you want to call, push send, then
the phone snarfs a pair, and uses it just for that one call! I also
heard rumors of phones having 1000 ESN.MIN's in them, and they use them
up slowly. I AM NOT SURE IF THESE RUMORS ARE TRUE, THEY CAN BE LIES..
but we can make them true.
___________________________________________________________________________
# End. I made this manual short and complete. If you want to learn more
I suggest asking someone who cares because I don't. I wrote this manual
to help those who are motivated enough to get off thier ass and learn more.
___________________________________________________________________________
<> Chaos-IL <> ** Terminal Man ** <> Chaos-IL <>
***
09. User Registry for H/P
User Registry V1 Notes
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
At this issue we've included a User Registry that follows the H/P information.
please note that this section includes UNVERIFIED information that have been
sent to us. A User Registry will be added once a while in Chaos-IL issues.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Registry Contents:
-1- Information about Israeli ISP Hacking by Blue Grass
-2- Credit Cards phreaking by OXiD
-3- The Art of Israeli Carding by Elmer Scud
-----------------------------------------------------------------------------
-1-
ISP (Internet Service Providing) Hacking in Israel
---------------------------------------------------
Written By Blue-Grass / Designed to thr Chaos-IL magazine 1998
As you all know, most of "scene" people in Israel use hacked accounts.
It all started few years ago, when someone understood that if shell accounts
can be hacked then it won't be a big deal to hack ISPs. I used to be a warez
scener and i had most of Israel ISPs accounts, hacked ofcourse.
Trendline, Aquanet, Isracom. Internet gold and even Netvision where the main
"account suppliers". In fact, as i remember, Trendline held the israeli scene!
user lists where spread to all sceners and anyone who wanted a nice account
that could hold few monthes got one. After a year or so, Netvision user files
where out and so aquanet. Hackers just hacked the isp and pulled out the user
file, 2 minutes to crack and you have a list of 1800 users, just choose the
easiest password to remember and get online. since these files where so easy
to get and some people even spread them on main channels like #israel, you can
guess who putted his handes on those lists... the ISPs. Since the ISP learned
the consequences, it is really hard to find a good updated lists. so one
choice is to card a small IBM account, or to use 135 wich is pretty fast but
MONEY IS PAYED. Some people blame the ISPs that they "killed" a whole scene.
Now, as I remember, Trendline was the most hacky ISP around all it takes to
hack them is to enter their unix box through any open port and hackable one
(most of their ports are opened) and then you have two choices: 1) get your
root in your favourite way. 2) pull the userfile and crack it.
Hacking trendline is a bit harder now since they treated their system better
but it's still hackable. Use port 80 and check for people with accounts for
shells. since not many people have hacked trendline, convince them to give you
the l/p so you will be able to hack trendline and then give anyone an account.
Netvision is harder but possible. Use the same methods but take care becuase
Netvision registers IPs.
It seems like people don't want to mess with it anymore. But it seems like
people doesn't want to pay as well... so take a cup of coffee, sit few
houres and let us enjoy fast and free internet.
For comments, question or whatever you want,
leave an E-mail at: shine-@usa.net
_____________________________________________________________________________
-2-
Credit Cards Phreaking By OXiD
------------------------------
Many frauds are taking place nowdays when almost every web page tries
making its money by on line orders.
What do we care about it you ask? well,We can gain much from the fact that
there are people who are stupid enough to on line order a product and take
advantage of their stupidity.
First,in order to obtain cards from all kinds,the most common way is by web
hacking.A hacker won't have a problem making his way into a system and
downloading a users files if needed or a credit cards lists if wanted.
But there are other ways of credit cards frauds in the internet except
hacking,you can always set a false web page which gets on line orders,and
the rest is self explained.
You can always cheat people into giving you the cards by phone but that's up
to your manipulation abilities and their lack of wisdom.
Oxid.
_____________________________________________________________________________
-3-
The Art of Israeli Carding
\----------------------------/
Hi'a everybody and welcome to the new guide of my way to get cc-#s and full
info in a new mistake proof way fitting for israely costumer suckers invented
by me - Elmer Scud!
Well First i'd like to announce that 1nce in 2-4 weeks i'll publish 2 things :
1. a list of israely FULLY working cc-# ( supplied with full information ).
The file to look for will be called : "cc#s-0X.NFO", where X is the #
of issue released! look forward to that!
2. a list of 10-20 accounts ALL working and ALL for atlist a month of
sliding, in Internet-Zahav and Netvision!
The file to look for will be : "accounts.00x", where x is the number of
issue released. SOUNDS GOOD EH ?
Ok now lets got write to it - THE ART OF CARDING !
Groceries :
* 1 of those phonebooks called Yellow Pages, either of you're own city or
of the area
* a born tellent to lie
* a paper
* a pencil
Way of getting it :
* open the phonebook and choose a sucker-like-name
* call there ( do a grown man's voice ) and say : "Can I speak with Mrs. Sucker, Please ? "
* they'll usually say yes and then say you're from the bank and the order
given to the bank of re-limiting the CC to 500/1000 N.I.S. a month!
* the asnwer will be somtin like this : "AHAM what order i didnt give no
order!" they'll be in shock! you say you have a form signed by Mrs. Sucker
from date Sucker/Time/To-Get-Fucked! and they'll be even more shocked!
* Now you say : "Im terebly sorry lemme check it please hold on for a second "
count to 30 and say : " by what i have here theres no mistake , but if you want,
i can check it out for you... , just give me you're cc number ( be sure to
use the word credit card and not visa or isracard ) " , mostly those fouls
will be so shocked they'll hand in to you the cc#. now tell them to wait a
few more seconds. count to 30 again.
* now say : "Mrs. sucker? " wait for they're replay and then go - " i need
you're I.D. number to verify ", again because of the shock they'll hand
in the id# also. now ask them to wait - same procedure. then say : " im
sorry for the truble, we'll check it out and call right back to you, thank
you, good-bye " dont forget to be polite like all bankers do! .
* well thats about it folks! now you have you're cc# and info to do what you
wish.
- Having any truble or you need a a number real urgent leave me - Elmer Scud
a msg at liquid underground bbs and i'll get back to ya as soon as possible
okidokie?
next issue - new methods and some froding you can do at the bank!
_____________________________________________________________________________
***
10. Resources & Credits
Chaos-IL would like to greet every possible resource who supported us or
helped us in any kind of a way.
Bezeq TeleCommunictions INC.
Barak Israel-International INC.
GreenShop Computers (TEL-AVIV)
IDC Communications INC.
AT&T Communications INC.
SPRINT Global-One Communications
Israel Telegraph LTD.
2600 Magazine
Phrack INC. Newsletter
Informatik E-Magazine
PLA-Phone Losers of America
Hacker's Heaven (BBS)
Underground Society (BBS)
Route 66 (BBS)
Liquid Underground (BBS)
#hack
#phreak
#telephony
#punx
#root
www.border.com
www.etext.org
www.l0pht.com
www.lat.com
www.liquid98.com
www.itd.nrl.navy.mil
ftp.fc.net
The Prototype
Captain Crunch
Emmanuel Goldstein
"T.S" (Bezeq 144 Operator)
"C.B" (Bezeq 188 Operator)
"N.I" (Sprint Global One Operator)
Retro
Manomaker
Unix geek
Kocane (Kaos On Compton {08})
Phriend
The Milkman
Oxid
Anti-D
Lizzard King
Stoner
Dr. Grass
Dead Zed
Blackbird
Prophet
Substance
F0k
Mindroot
Toast
BelowZero
*ALL of Chaos-IL Members
-[EOI#2]----------------------------------------------------------------------
(c) Chaos-IL Magazine
March 1998
